Anyone solved the printing mixed sized (Letter/Legal) documents from Mac version of Reader or Acrobat Pro?

I really need to be able to print mixed sized PDF documents in Reader or Acrobat Pro on a Mac.  When I try, the letter sized pages are fine, but only the first legal sized page in the stack prints correctly.  The rest shift down the page leaving a wide margin at the top of the page and then what should be printed at the bottom goes off the page.  I have tried the settings in the Reader print dialogue box "Choose paper source by PDF page size", along with an umber of variations of all the other settings, and I still get the same results.  Can someone please tell me that there is a way to do this?  HELP!!!!

Hi DSKinCO,
Are you still facing this issue.
If yes, i would suggest if you create a new document using word with mixed page sizes. Try to print after converting that into PDF using either Acrobat or Reader.
Before you print, make sure your Adobe Acrobat/Reader is updated.
Regards,
Ajlan Huda.

Similar Messages

  • Anyone solved the blinking statusleds on 1252

    Hi,
    have anyone solved the blinking statuslights on the 1252? -it always blinks status blinks red,green,blue when on 15,4w, 802.3af compliant switch!
    Im now running the 1252 lightweight on controller 4402 with firmware 6.0.182.0, i have administratively shut down the 5ghz radio and rebooted. still blinkning!!
    The only solution seems to be to physically remove the 5ghz radio.
    i have noticed that when 2.4 & 5ghz is inserted but 5ghz is shutdown it draws 10019mW.
    when 5ghz radio i physically removed it draws 7555mW.

    If you are using firmware 6.X, then this code will upgrade the firmware of the radios to version 2.0.0 which allows both radios to operate but at a lower rate.
    The lights blinking red, blue, green at a pace of about 1 per seconds means that the LAP can't find the WLC. If the light is red all the time then it means that it's gone into ROMmon.
    If the light is BLUE only that means that a client has successfully associated to it. If it's green it means that it's joined a WLC but no client has associated to it.
    Hope this helps.

  • Signed letter or document from the withholding agent (Apple).ITIN-IRS

    Hello:
    I'm from Spain.
    I'm trying to publish an ibook with Ibooks Author, and I need an ITIN number from de IRS.
    The problem was the following:
    you will need a signed letter or document from the withholding agent (Apple), on official letterhead, showing your name and evidencing that an ITIN is required to make distribution to you during the current tax year that are subject to IRS reporting or Federal withholding.
    Is possible to contact with Apple for to receive the letter required?
    is an impossible mission?
    I need help, and I reed a lot of discussions, but i can't see the correct answer.
    Thanks and best regards.
    Viaje Singular

    No one has needed the letter from Apple? I'm the only earthling who need a letter from Apple? For to get the ITIN my manager asks me this letter...
    Help needed from Spain.
    Thanks.

  • The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

    The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

    you pay for it up front, and they give you a rebate or $99, so if you buy a $99 printer from them (Epson Stylus NX430 Small-in-One Color Inkjet Printer $99.95) then the printer becomes free. You can not get this deal unless you also buy a mac with it.

  • Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and  computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance.  OK

    Has anyone seen the following on their WP?
    Message from webpage
    WARNING: Time Warner Cable Customer –
    Your Internet Explorer browser and
    computer may be compromised by
    security threats. Call 844-600-6224 now for
    IMMEDIATE assistance.
    OK

    This sounds like a virus or malware program that has made its way onto your computer.  I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system.  If this doesn't work, I would suggest  you use Microsoft's Malware Removal Tool.  You can download it at the link below.   Hope this helps.
    http://www.microsoft.com/security/pc-security/malware-removal.aspx

  • How to open document from mac when using windows without transferring the file?

    How can i open a document from mac when i am using windows without transferring it?

    depend on the document program more then anything else really
    when ever I open a doc with word it make a history for undo and redo action file in the same dir
    with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
    but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
    or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

  • HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    You already have the software installed that you need if you have 10.8.2.
    If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
    Power up the Express for a full minute
    Hold in the reset button on the Express for 7-8 seconds and release
    Allow a full minute for the Express to restart
    Click the AirPort icon at the top of the Mac's screen
    Look for a heading of New AirPort Base Station
    Just below that, click on AirPort Express
    What happens?

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    what's creative cloud 6?  do you mean cs6?
    what version of acrobat pro do you have installed and what are you clicking to start it?

  • What is the best way to import word documents from a PC to the Ipad2

    What is the best way to import word documents from a PC to the Ipad 2?

    You first need an app on the iPad that supports word documents - the iPad doesn't have a file structure like a 'normal' computer, and every file/document needs to be associated with an app. If you don't have such an app then options include Apple's Pages app and third-party apps such as Documents To Go and QuickOffice HD. How you then get the documents on the iPad will depend upon the app that you have/get as different apps may use different methods e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

  • How to delete the photo that I just down load from Mac book air to I pad?

    How do I delete the photo that I just down load from Mac book air to iPad?

    See Here > To delete synced photos from your device

  • HT201250 Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

    Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

    You should backup before installing any new system updates or upgrades. Depending upon what your machine is qualified for you could upgrade to Lion or Mountain Lion.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Printing Mixed Sized Scans

    Hello,
    I receive the broker's scanned deals by email.  They want the deals printed on legal-sized paper.  However, their  emailed scan(s) include a mix of both legal and letter documents.  
    When I print the letter-sized documents on legal paper, needless to say there is too much space at the bottom of the page.
    If I try to tweak the page, using the printer's Custom Scaling option, the margins are radically affected.
    We have both a Xerox 7855, as well as an HP Laserjet 4250.
    Is there an easy fix for this?  Googling the answer hasn't gotten me anywhere.
    Thank you for your help!  Valerie

    Hello 1blondeval,
    Welcome to the HP Support Forums!
    I can only think to select the leagl pages to print and then select the letter pages to print.
    But, to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
    The support page for your product may be helpful in the meantime: HP LaserJet 4250 Printer
    I hope this helps!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Has anyone solved the "garbled characters" issue i...

    When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
    Zürich appears as: Zã¼rich
    München appears as: Mã¼nchen
    Liège appears as: Liã"ge
    I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
    Has anyone solved this extremely annoying issue?
    Thx

    I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
    Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
    As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
    At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
    So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
    After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
    The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
    I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
    Finally, after playing with it some more I found a simple solution which should work for everyone:
    ***** SOLUTION *****
    1. Enable internet access in Nokia Maps application (set it to When Needed).
    2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
    3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
    4. Put the card back in the phone if you extracted it and start Nokia Maps.
    5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
    6. Now codepage should be correct and all names become readable.
    This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
    Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
    Message Edited by ankor85 on 09-Jan-2008 09:02 PM

  • Has anyone solved the problem of sending Pages docs to Windows machines?

    I am trying to create a business newsletter that can be emailed to anyone who wants it. I'm working with OS X 10.4.10 and Pages. My business partner, who works on a PC, can't read a Pages doc, so I converted it to a pdf, and Windows won't read that, either. So I exported it as a Word doc, and he can read that, except the colors aren't true. What kind of a program creates files that pdf readers can't view? And why did I spend my money on Pages if it can't create a file everyone can read?

    Strange, I've been emailing PDFs with no problems at all.
    I am the only MAC-MAN in the office so all my work goes to 100% PC "market".
    A wild guess - are you using Apple Mail app? If so, make sure the "Send Windows friendly attachments" is selected.
    Do not encrypt the PDFs.
    Do not include EPS graphics (just in case...)
    JPEGs rather than TIFFs (dunno why, but better safe...)
    And most importantly, make sure the end users have the latest Acrobat Reader!!!
    You would be surprised to find how many "incompatibilities" boil down to obsolete software being used.
    To give you an example, I did an internal use web page using a FLASH animation, and several users sent me VERY ANGRY emails that the "MAC crap" doesn't work on their computers, well, guess what, for security (MS-security, not REAL security) FLASH was disabled on the network computers, nuf'said!
    Failing all above, send HTML.
    Hope you solve the problem. Keep us posted.
    i.3d

Maybe you are looking for