Anyone think of why this monitor won't work?

I have a 2009 mac pro with an ati 1gb card. it has a dvi and two displayports. The dvi monitor has my dell on it, no problems. I had this old vga monitor, got a mini displayport to vga adapter, plugged up, and nothing. The monitor's power flashes as it appears to know it's plugged in, but nothing comes up in sys prefs or even system profiler. The monitor is pretty old i mean, probably around ten years, but it's just a vga. Any ideas? Not that it matters, but it's a mag innovision display.

Try updating your 10.6.3 to 10.6.8
<http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)>
"Mac OS X v.10.6.4 or later"

Similar Messages

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

What is the problem that you are having ? If you are getting an error message then what does it say ?

New download of Firefox v. 3.6 for Vista seems very slow. Can anyone think of why this would happen?

April 5th, 2011:
First, I didn't install Firefox 4 because it doesn't support Norton 360 and the related toolbar which is crucial to me. So I installed 3.6 which I have used before which was corrupted by a Trojan virus I was infected with. I had to uninstall everything and in the interim I used IE8. I re-installed Firefox 3.6 yesterday and the only add-on I installed was the Yahoo! Toolbar for Firefox.
Added on April 6th, 2011:
Also, I forgot to add that often times I am waiting while the top of the screen says "Mozilla Firefox" - (Not Responding) which is what I went through with IE8. I'm getting VERY frustrated.
Any help anyone can give would be greatly appreciated.
Thank you in advance for your prompt attention to this question as I am VERY behind in my work due to all of this "mess". :(
Christine

Norton has released a patch to address incompatibility issues with Firefox 4. See [http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894 Norton Compatibility patch Firefox 4.0]
If you would like to update to Firefox 4.0, please do that ''before ''you install the Norton patch. Update via Help | Check For Updates preferably.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
The '''Browserplus '''plugin you have installed will almost certainly cause Firefox to hang occasionally and it would be wise to disable it via Tools | Add-ons | Plugins.
You also need to update Flash to v10.2.159.1 which also patches a recently discovered Zero Day exploit. See [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Adobe releases security update for Flash Player]
You can update Flash via http://get.adobe.com/flashplayer/
Similarly, your Shockwave For Director plugin is also out of date which may cause Firefox to hang if the video requires a newer version. Update that via http://get.adobe.com/shockwave/
Last but not least, consider disabling the Yahoo ActiveX plugin via Tools | Add-ons | Plugins. ActiveX is a Microsoft technology which is frequently targeted by hackers. By installing it in Firefox, you're comprising the browser's security and potentially exposing your system to attack. Firefox can open any Yahoo page without requiring ActiveX to be installed.

Any Ideas Why This DVD Won't Work?????????

I have posted this puzzler in several other forums.
I have found a DVD-R that I made in my eMac last year and I can’t get it to work.
I can’t remember how I made it or with what application! I cannot even remember what is on it (whether it was slides or video).
In a normal DVD player all that appears is a large close-up of a face.
Whether it is a still photo or a video frame I cannot tell.
I have pressed all the controls I can think of but I can't get the face to move or change etc.
HOWEVER, when I put the DVD in my eMac and double-click it I get the usual window with two files. One is “Video RM” and the other is “Video TS” but both of them are EMPTY and there is nothing else to be found.
Now here is the really strange part. When I open “Get Info” I get the following details:-
Kind: Volume
Format: Mac OS Extended
Capacity: 3.71GB
Available: Zero KB
Used: 3.71GB on disk (3,978,659,840 bytes)
So obviously there is something on it in spite of the apparently empty RM and TS folders!
Can anyone suggest how I can play it ?
Ian.

Thanks Patrick - I had already tried it and nothing had happened.
I had actually written as much to you when I decided to give it another try before posting my reply.
Guess what? This time it worked!!!!
I don't know what I did differently or why the TS folder appears empty.
Thank you for spurring me on to try again.
Ian.

When I switch libraries I lose the majority of the material in my main library and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

When I switch libraries I "lose" the majority of the material in my main library (or at least I can't see it) and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

I seem to have found a way around it. Rather than switching libraries by going into files/switch libraries I used Aperture Preferences to change them. I've done it a couple of times and it appears to work OK.
That is an interesting finding. It suggests, that your "Preferences" file "com.apple.Aperture.plist" may have been corrupted and you fixed it this way. Can you now switch between libraries the usual way? If not, I'd try to remove the "preferences" file from the user library to the Desktop and relaunch Aperture.
The Aperture 3: Troubleshooting Basics:http://support.apple.com/kb/HT3805
describe how to remove the user preferences.

My imac on OS 10.5.8 is showing near 100% processor usage most of the time. It appeasrs that process SystemUIServer is the culprit using 70% or more of processor time. What does anyone think is causing this ?

My imac on OS 10.5.8 is showing near 100% processor usage most of the time. It appeasrs that process SystemUIServer is the culprit using 70% or more of processor time. What does anyone think is causing this ?
What is the purpose of the UIServer module ?
Is there a good place to learn about the OS modules ?

Useful information from BDAqua in this thread:
https://discussions.apple.com/message/22676167#22676167

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

Why this program don't work without the "stop"?

can you tell me why this program don't work without "stop"?and why the "stop" of my program can not work？
Attachments:
N(%}QA2R@SOLAF_12~0SQ)A.jpg ‏67 KB

Crossrulz, sometimes you can snip the URL of the image:
http://forums.ni.com/ni/attachments/ni/170/823066/1/
The stop button is checked once in every iteration of the while loop, which includes waiting for the for loop to complete its 9 iteration.
The for loop takes 9 seconds to complete because of the time delay, therefore clicking the stop button can take upto 18 seconds, depending on whether the button has been read yet.
Turn on the highlight execution )light bulb icon) to see what is happening in your code
- Cheers, Ed

HT1689 I updated my phone to the iOS7 and now when i try to use the keyboard, i can't see myself typing and it goes very slowly. I am confused to why this happened. It worked perfectly fine with iOS6. Any suggestions?

I updated my phone to the iOS7 and now when i try to use the keyboard, i can't see myself typing and it goes very slowly. I am confused to why this happened. It worked perfectly fine with iOS6. Any suggestions?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

Can anyone tell me why this error only occur in Tomcat-4.0.2 ??

When I try to execute my jsp page, Tomcat printed out this error.
This error has never occurred in Tomcat-3.2.1 and Tomcat-3.3a.
java.io.IOException: Stream closed
     at org.apache.jasper.runtime.JspWriterImpl.ensureOpen(JspWriterImpl.java:242)
     at org.apache.jasper.runtime.JspWriterImpl.clearBuffer(JspWriterImpl.java:190)
     at org.apache.jsp.admin_0005flogin$jsp._jspService(admin_0005flogin$jsp.java:988)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:202)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:382)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:474)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
     at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
     at java.lang.Thread.run(Thread.java:536)
Another thing is, I'm trying to display chinese characters using jsp page. When I use Tomcat-3.2.1, i can view the chinese characters correctly, but when I converted to Tomcat-3.3a (due to the newer version of JDBC API available in Tomcat-3.3a), it don't seems to recognize the html META Header that I use to encode the jsp page.
Is there anyway if making Tomcat-3.3a read the header or what ???
Can anyone enlighten me on this ??
I really need to get the solution or the reason ASAP !!
Thank you in advance.

Hi,
I dont know whether you are still getting the error. This error seem to be result of closing the output stream accidently or manually for some reason. so look out for 'out.close' or other 'out' operations which deals either with flushing or closing the stream. By removing the statement I solved this problem.
if u have any questions: contact me on [email protected]
Thanks.

Can anyone tell me why this doesnt' work please

Be gentle :o)
I am trying out this printing in version 1.4 I am wanting to print out the contents of a text file
Below is the code but it does nothing
It compiles but doesn't function??
HELP
import java.io.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
import javax.print.event.*;
public class PrintFile {
     public static void main(String args[]) {
          PrintFile pf = new PrintFile();
     public PrintFile() {
          /* Construct the print request specification.
          * The print data is Postscript which will be
          * supplied as a stream. The media size
          * required is A4, and 1 copy are to be printed
          DocFlavor flavor = DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST;
          PrintRequestAttributeSet aset =
               new HashPrintRequestAttributeSet();
          aset.add(MediaSizeName.ISO_A4);
          aset.add(new Copies(1));
          aset.add(Sides.TWO_SIDED_LONG_EDGE);
          aset.add(Finishings.STAPLE);
          /* locate a print service that can handle it */
          PrintService[] pservices =
               PrintServiceLookup.lookupPrintServices(flavor, aset);
          if (pservices.length > 0) {
               System.out.println("selected printer " + pservices[0].getName());
               /* create a print job for the chosen service */
          DocPrintJob pj = pservices[0].createPrintJob();
               try {
                    * Create a Doc object to hold the print data.
                    * Since the data is postscript located in a disk file,
                    * an input stream needs to be obtained
                    * BasicDoc is a useful implementation that will if requested
                    * close the stream when printing is completed.
                    FileInputStream fis = new FileInputStream("EventFile.txt");
                    Doc doc = new SimpleDoc(fis, flavor, null);
                    /* print the doc as specified */
                    pj.print(doc, aset);
                    * Do not explicitly call System.exit() when print returns.
                    * Printing can be asynchronous so may be executing in a
                    * separate thread.
                    * If you want to explicitly exit the VM, use a print job
                    * listener to be notified when it is safe to do so.
               } catch (IOException ie) {
                    System.err.println(ie);
               } catch (PrintException e) {
                    System.err.println(e);
}

I too find the same problem not locating all the print services, then i use defualt print service and it works, another error i was getting that of invalid flavor so i then get all the doc flavor supported by my printer and use AUTOSENSE. Following is the code that u can test:
import java.io.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
import javax.print.event.*;
public class PrintText1 {
     public static void main(String[] args) {
          System.out.println("Print Text");
          PrintText1 ps = new PrintText1();
     public PrintText1() {
          /* Construct the print request specification.
          * The print data is Postscript which will be
          * supplied as a stream. The media size
          * required is A4, and 2 copies are to be printed
          System.out.println(0);
          DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
          PrintRequestAttributeSet aset =
               new HashPrintRequestAttributeSet();
          aset.add(MediaSizeName.ISO_A4);
          aset.add(new Copies(1));
          aset.add(Sides.ONE_SIDED);
          //aset.add(Finishings.STAPLE);
          /* locate a print service that can handle it */
          System.out.println(1);
          PrintService defpservices = PrintServiceLookup.lookupDefaultPrintService();
          System.out.println("Default Printer " + defpservices.getName());
          /* create a print job for the chosen service */
          DocPrintJob pj = defpservices.createPrintJob();
          System.out.println(2);
          try {
               * Create a Doc object to hold the print data.
               * Since the data is postscript located in a disk file,
               * an input stream needs to be obtained
               * BasicDoc is a useful implementation that will if requested
               * close the stream when printing is completed.
               FileInputStream fis = new FileInputStream("file.txt");
                    Doc doc = new SimpleDoc(fis, flavor, null);
                    System.out.println(3);
                    /* print the doc as specified */
                    pj.print(doc, aset);
                    * Do not explicitly call System.exit() when print returns.
                    * Printing can be asynchronous so may be executing in a
                    * separate thread.
                    * If you want to explicitly exit the VM, use a print job
                    * listener to be notified when it is safe to do so.
          } catch (IOException ie) {
               System.err.println("IOException " + ie);
          } catch (PrintException e) {
               System.err.println("PrinterException " + e);
Try this code it will work for you to print the text file.
Now my problem is i am trying to print the html file and its printing the html file including all the html tags, can anybody help how can i be able to print only that area that viewable to user in the internet explorer and not all the html tags:
Following is my code which i had written using servlet:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.util.Properties;
import java.net.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
import javax.print.event.*;
public class printServlet extends HttpServlet
     public void doGet(HttpServletRequest request, HttpServletResponse response)
          throws ServletException, IOException
          // Set the mime type
          response.setContentType("text/html");
          // Create a PrintWriter Object
          PrintWriter out = response.getWriter();
          /* Construct the print request specification.
          * The print data is HTMl which will be
          * supplied as a stream. The media size
          * required is A4, and 1 copies are to be printed
          System.out.println(0);
          //DocFlavor htmlFlavor = DocFlavor.URL.TEXT_HTML_US_ASCII;
          DocFlavor htmlFlavor = new DocFlavor("application/octet-stream", "java.net.URL");
          PrintRequestAttributeSet aset =
               new HashPrintRequestAttributeSet();
          aset.add(MediaSizeName.ISO_A4);
          aset.add(new Copies(1));
          aset.add(Sides.ONE_SIDED);
          /* locate a print service that can handle it */
          System.out.println(1);
          //PrintService[] pservices =
               //PrintServiceLookup.lookupPrintServices(htmlFlavor, aset);
          PrintService pservices = PrintServiceLookup.lookupDefaultPrintService();
               //System.out.println("Printer Length " + pservices.length);
               //PrintService service = pservices[0];
          System.out.println("selected printer " + pservices.getName());
          DocFlavor[] sdf = pservices.getSupportedDocFlavors();
          System.out.println("Supported DocFlavors are: ");
          for( int r = 0; r < sdf.length; r++ )
               System.out.println(sdf[r].toString());
          /* create a print job for the chosen service */
          String urlString = "http://localhost:8080/printengine/jsp/hello.html";
          URL url = new URL(urlString);
          DocPrintJob pj = pservices.createPrintJob();
          Doc doc = new SimpleDoc(url, htmlFlavor, null);
          out.println("<html><body>" + doc + "</body></html>");
          System.out.println(3);
          /* print the doc as specified */
          try
               pj.print(doc, aset);
               System.out.println(4);
               * Do not explicitly call System.exit() when print returns.
               * Printing can be asynchronous so may be executing in a
               * separate thread.
               * If you want to explicitly exit the VM, use a print job
               * listener to be notified when it is safe to do so.
               out.println("<html><body>Printing Successful</body></html>");
          catch (PrintException e)
               System.err.println("PrinterException " + e);
Please help me out

External Monitor won't work

I have a MBP 17" Late 2011 model with the Intel HD 3000 and AMD 6770M grpahics cards. I have read through many of these posts and found the exact same problem that I am having as well. I hook up a monitor through the VGA connection; Windows sees the monitor and even correctly idenifies the model; however no picture on the screen. Also, when monitor is connected is shows the startup windows screen and even the Safe boot screen; but the second it gets into the desktop the screen goes away on the 2nd monitor. I have tried many of the solutions; updating boot camp drivers, updating AMD drivers, etc. and no joy. When updating the AMD drivers, AMD's website detected that the hardware was the 6700 series and windows 64-bit; gave me the drivers to install and when installed the drivers their program ended up saying that the hardware was incompatible and not the right one. Why is this so hard and can anyone tell me what to do, also is it possible to get windows to see the Intel HD 3000 card or is that just not possible.

I have followed your advice and still no go with dual monitor through VGA. However, here is an interesting note. Using the ATI drivers from bootcamp 4.0 disk, the program detects the graphics card as a 6740 and not a 6770M. However, AMD's own website detects it as what Apple stats in their specs, a 6770M and when it give the the drivers to install that, the program won't load it saying it is the incorrect hardware/software match up, but it does the SAME decting with the boot camp drivers and goes a head and installs the drivers for the 6740. I am not sure what to do, so here's a run down again of what I have and what I need to do:
MBP 17" 2.4 GHz Intel i7, 4GB RAM 1333
Bootcamp 4.0
Windows 7 Home Premium 64-bit edition
Trying to use dual monitors through the VGA adapter, VGA adapter and cable work (works in safe mode, start up, and in OSX). Once in Windows 7 desktop, 2nd monitor goes dark and won't respond. I have gone into safe mode, uninstalled the display drivers, clean registry, reboot into safe mode, then install the bootcamp ATI graphics drivers (no go), rinse, repeat, tried using the drivers that AMD's website detects of the device (no go), rinse repeat went back to the bootcamp ATI drivers just so I can still use the main screen.Has anyone else figured out this problem.

Why this broken c++ code works?

I'm testing some flascc code, and I'm trying to trow some errors, but it seems that my tests just return NULL or zero, and never stop the execution, and I think this is not desired.
For example:
Error *errorClass = NULL;
int myVar = errorClass->foo();
I think this should trow an error while calling a function of a NULL pointer but it's not the case.
Also, I've tried some divisions by zero, and there is no error, just returns 0

This doesn't have to crash unless you try to access the attribute of your Error object in Error::foo().
This is not against the c++98 standard (haven't verified), but this code will also run on vanilla gcc.
Method code are almost like normal function, but they are given the object as a "this" parameter so it can works on its attributes.
So let's say that in Error::foo() you do this : printf("hello world)
What your code do is the equivalent of
     void foo(Error * this){
          std::cout << "hello world" std::endl;
     int main(){
          foo(NULL);
          return 0;
This code won't crash, but as soon you try to access the attribute this is another story. So, it really depend on what you do in Error::foo().
For the zero division, the standard left this as an undefined behavior. So it's perfectly normal, on some compiler/architecture it will crash, on others not. It's left to the compiler implementation as to what should happen.
So nothing in what you say should cause the program to crash, it might, but it might not, it isn't a bug, it's just undefined in the standard.
You should manually check for error, C++ is way more low level than AS3 it won't stop you from shooting yourself in the foot, but that's also one of the reason why it is so flexible and performant.

2nd Monitor won't work

I bought a Pavillion p6210f last week with Win7 loaded to replace my Dell/Vista. I was using two monitors with a VGA port and DVI port on the old PC, so I tried plugging in the same on my new HP and the DVI would not fit. In examining the pins I found that, althought the Manual said DVI, but the plug has the pin/bar arrangement of a DVI-D. So, I bought a VGAto DVI-D adapter and everything plugged in snuggly. All pins and bar appear a match.
But, it won't work. This is what is showing
NVIDIA nForce Serial ATA Controller HP RC Mirror Driver [Display adapter]
NVIDIA GeForce 9100 [Display adapter]
Acer P241W [Monitor] (24.0"vis, s/n LB4040014320, March 2008)the one working monitor....
After hours with the 800 support and hours of reversing the two Acer monitors, the DVI-D port is simply dead. Anything plugged in to the VGA works fine, anything and any combination plugged into the DVI-D and cable switching etc. the 2nd monitor is not even recoginized. The NVIDIA control panel doesn't recognize it. The amber power light just stays that way and nothing ever flashes on the 2nd screen. That is, it is the same as not plugging in at all.
I was less than pleased when 800 tech and supervisor suggested I take it to a repair center. A week old? I have put way too much setup and data transfer into the new HP to go back to the retailer for a replacement.
Techs didn't know, but could there be a DVI-X with the same pins that also fits

Eldric, did you update to the latest video driver from nVidia? It sounds to me like a driver problem. Update and let us know if that solves your problem.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hyundai LCD monitor won't work with OS9

New Hyundai LCD monitor -dual input. Works fine with Windows XP, & with OS 10 but when I boot into OS9 the screen goes black, & the screen's menu button won't work. Have started os9 in safe mode but cannot find how to change the display/resolution/refresh settings. Where do I look to change these settings? And what settings should I try?

Have posted more on this in thread in "older hardware".
http://discussions.apple.com/thread.jspa?messageID=6115403#6115403. I hope this is the right link, thought I shouldn't duplicate postings.
Would very much welcome any more suggestions you might have
It's ATY rage 128 pro, VRAM 16MB
1024x768@60HZ, 32 bit colour

Anyone think of why this monitor won't work?

Similar Messages

Maybe you are looking for