Anyone tried a Mobile Phone Signal Repeater

I am on t-mobile (in the UK) and have poor indoor reception (its not great outdoors either) I have tried the various fixes suggested by others to no avail. I read that a signal booster at 2100MHz with an outdoor aerial and in house amplifier/transmitter may help. I know very little techy stuff only that my phone has difficulty making calls. Does anyone have experience of this type of product?

The Wilson products are going to be your best choice for home 4G repeaters. They tend to be a little more expensive than the competitors but there really aren't very many to pick from. You could browse around 3Gstore.com to see if they have anything else to offer that fits your needs and budget.
I do highly recommend you complete the site survey steps on 3Gstore.com:
Will an Antenna or Amplifier Help Me? Find out BEFORE You Buy!

Similar Messages

Can anyone recommend a quality 4G signal repeater?

I have poor service in my house and acceptable service outside. There is no high speed internet access available at my home so I can not use the network extender offered by Verizon.
I am reasonably tech savvy and could select my own, but I was hoping someone in the Verizon community could share their experience with signal repeaters to help me along.
I have been looking into a few options offered by Wilson Electronics.
It looks like their top of the line might be more than I need. I only plan to boost the Verizon signal in my area and I believe it also boosts frequencies that I won't need.
Thanks!

The Wilson products are going to be your best choice for home 4G repeaters. They tend to be a little more expensive than the competitors but there really aren't very many to pick from. You could browse around 3Gstore.com to see if they have anything else to offer that fits your needs and budget.
I do highly recommend you complete the site survey steps on 3Gstore.com:
Will an Antenna or Amplifier Help Me? Find out BEFORE You Buy!

For last 24 hours we have not had a mobile phone signal. NR12 8UN

Can you tell me what the problem is please? Post code NR12 8UN

Can you tell me what the problem is please? Post code NR12 8UN

WRT400N mobile phone issues

hello! I seem to have an odd issue with my router....Setup went through fine, I have it broadcasting a G and N network. The N network is awesome, the G is also running smoothly with all devices...EXCEPT mobile phones. My computers and Xbox run great off the wireless G...anytime a mobile phone connects it give it service for like 30 sec- 2 minutes maybe then drops it. The phone stays connected but says no internet service. You have to disable wifi on the device and reconnect it again to get another 30 sec of service before it repeats. I thought it was my device...but anyone with a mobile phone experiences the same. Is there some setting I can play with to remedy this?
BTW it does have the latest firmware. Thanks for any input!!

This "maybe" a bug. Can you try it using iphone?
Try refalshing the firmware and then the 30-30-30 reset rule.
Yesterday is history. Tomorrow is mystery. Today is a gift.

No WiFi when Mobile phone Network down

My home WiFi - BT Infinity, works fine when I have a mobile phone signal but should I have a very poor signal or none then I am unable to log on to WiFi. In other words when I need it the most it doesn't work. For example I am with 3 and this morning the 3 Network in my area went down, no problem I thought and switched on my 3 App which allows calls and texts via my WiFi connection. It wouldn't connect to my WiFi due to me having no mobile phone network? The same thing happened a few months ago when I was on Vodafone and had a poor signal. I was in a local cafe and so asked for their password and tried to logon to their WiFi: it took about 10 attempts due to the "quality of the internet connection"?
Is this anything to do with BT or is it my Samsung Galaxy S3? I can't see it being the mobile phone provider as it has happened with 2 different ones.
Many thanks

Your home wireless connection has nothing to do with a mobile phone signal or the 3 Network.
Your home BT Infinity wireless connection should show up on your phone wireless connections as something similar to BTHomehub5-xxxx and to connect to it you need to use the wireless passkey that is on the label on the Homehub.
If you are using an app to try and connect to your wireless connection it may be that you have a problem with either the app or the phone or you are not using/connecting them correctly.
Have a look at this link how to conect your phone to your BTHomehub
http://bt.custhelp.com/app/answers/detail/a_id/38411/~/how-do-i-connect-an-android-phone-to-my-bt-ho...

RAZR not recognized as "Mobile Phone"

I have been trying to get my PBook to recognize my RAZR as a Mobile phone. First the basics - my PBook (15" Aluminum 1.25 GHz / FW 800) has built-in BT and that is working fine. I can see the device and can xfer files using the BT File Transfer util. I am setting the phone as discoverable, and the little Bluetooth icon flashes on the phone. I'm running Tiger with all updates installed - all that are available via Software Update as of today's date.
If I use the "Any Device" option in the BT setup wizard, my phone shows up in the list and I can successfully pair with it. If instead I choose "Mobile Phone" I can't see the phone. I've tried deleting the Bluetooth preference .plist files, removing the device pairings and then re-running the wizard, but the only thing I can get to work is the "Any Device" option. After being paired, the following shows up in the BT "Device" tab in System Preferences:
Device Name: troy's RAZR
Device Address: 00-14-9a-dc-15-8a
Device Type: Computer
Device Services: , Voice Gateway, Hands-Free voice gateway, OBEX Object Push, OBEX File Transfer, Dial-up networking Gateway
Paired: Yes
Configured: Yes
Favorite: Yes
Connected: Yes
I'm having problems getting the PBook to actually 'see' the phone as a modem (have also followed a bunch of other instructions here, including d/l-ing some of the modem scripts for the Moto phones). I can't iSync with BT, either. The RAZR is not seen by iSync.
I'm missing some key parts of the setup that are done via the Mobile Phone setup screen, and I think that is the root of my problem. Any ideas on how to fix this? Why is the RAZR not recognized as a Mobile phone?
Thanks!!

I can't get my PowerBook to recognize my V3 at all. I have had complete success with my V600, but today I got a new V3, and I'd like to get my numbers from the V600 to the V3. There are too many to copy them to the SIM card (I hate the way it's all or nothing!), so I'm trying to do it with iSynch. I have managed to synch the V600 with no difficulty, but I can't even pair the V3. Is there some optimum position you need to hold the phone in relation to the PowerBook, some secret incantation or what? I tried selecting Mobile phone and Any device, but neither one works, and I've tried it on two different user accounts, so I don't think it's a preferences issue either.

Best home/office cell phone signal booster

Can anyone recommend a cell phone signal booster for the 4/4S?

Sure. If it's for a car, that's easy. If it's for a home or office, answer the following:
What carrier or carriers do you need to support?
Over how large of an area do you need to boost the signal? One floor or multiple stories?
How strong is the signal strength outside of your home/office (Ideally on the roof where you'd need to mount the outside antenna)?
With that information, it's possible to figure out what signal booster would be best for you.

I tried adding mobile accessibility and now i can't unlock my phone. Can anyone help?

I tried adding mobile accessibility and now i can't unlock my phone. Can anyone help?

From
http://www.windowsphone.com/en-GB/how-to/wp8/basics/accessibility-on-my-phone
Tap Restart phone.
After your has phone restarted, a message about the lock screen will be read aloud. Tap the lock screen at any time to hear the time, date and notifications read aloud. To unlock your phone, flick the screen up. (If you have a password, tap any number key to hear that number read aloud, then double-tap to enter the number as part of your password.)
If this is the first time you've turned on Mobile Accessibility, you'll be presented with a training session to help you quickly learn how to use it. (You can return to the training at any time by triple-tapping the screen to access the Quick Menu, then selecting Support > Touch Training.) Otherwise, the Mobile Accessibility home screen will load.
Worse case a hard reset will clear it (you will of course erase the phone)
http://support.verizonwireless.com/support/devices/knowledge_base.html/66350/

I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this?

I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this, and any idea how I can rectify the problem?

When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
http://support.apple.com/kb/TS1567

Is it possible to reset an iPhone 3GS when anyone tryed to unlock the mobile. I wanted to use the Phone with the correct Provider.

Is it possible to reset an iPhone 3GS when anyone tryed to unlock the mobile. I wanted to use the mobile Witze the correct Provider.

If it was unlocked by unauthorized means it may not be possible to remove the hack; it depends on how it was done. Try this: http://support.apple.com/kb/HT1808
If you get error 3194 or 1015 then it is not possible.

Sending & receiving signals from a mobile phone i/o

Dear friends,
I am working on a project to send and retrieve data (electrical signals) to an external hardware circuit using a mobile phone.(My project doesn't use a computer, instead I use a mobile phone that is capable of supporting JVM.)
Can I use the USB(or any other output that can be used to send signals) port of the mobile? Is there an API to handle that?.(there is an API callled jsr-80 but I wasn't able to find that. I found only the specification)
How can I access the port? How can I use the wireless toolkit to do simulation? Please tell me how to program the USB output to send signals?
If u got any tutorials, white papers or any related web links please let me know.
CAn I use Bluetooth instead of USB without using a computer?
Thank You.
Note: I am working under windows platform.

umm i am trying to do the same thing... look into BREW
http://www.devx.com/wireless/Article/11932
but i unno i didn't get into that cause its expensive :S ... but take a look into it any ways :P
you could all wyas use filters and detect like dial tones... or if you have a collor phone change le back ground color and detect it with infreared (the color) or enven black and whit do like a barcode with a barcode reader?
oh if you have the mobile kit from your phone sniff the usb packets and try to pull the data

My iPhone has recently been crashing (or rather the apps) when I would try to access my text messages, contacts, phonebook, facebook, or email. I tried restarting my phone and lost all of my contacts. Anyone know what's wrong/how to fix it

My iPhone has recently been crashing (or rather the apps) when I would try to access my text messages, contacts, phonebook, facebook, or email. I tried restarting my phone and lost all of my contacts. This has been happening more and more frequently. Today I was in my pictures and was trying to crop one and my phone shut off completely. Anyone know what's wrong with it or how to fix it?

Make sure all apps are fully closed:
- double tap your home button
- hold your finger on an app
- when the apps start to wiggle press the red "-" button on all the apps
Now do a hard reset:
- hold the home button and the sleeps/wake button down at the same time
- the phone will shut off then when the apple logo ppears release both buttons
If by then your contacts have not been restored you would need to try and retreive them from a back up on itunes/icloud that was made when the contacts were on the phone. You could even stream them from the cloud if they were synced to the cloud. The link beow will show you how to restore from an itunes/icloud back up:
http://support.apple.com/kb/ht1766
Also to prevent this issue which i have seen alot when users are still running iOS 5 it would be best to update the iOS on your phone. To do this follow the link below:
http://support.apple.com/kb/ht4623
Hope this helps

My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck!

I am trying to set up iCloud keychain, but it keeps sending the verification code to my land line, even tho I have gone into my apple account and changed to my mobile phone

I am trying to set up Icloud keychain, but it keeps sending the verification code to my land line (which I guess I entered back when I first got my MacBook). I have gone into my apple account and changed the # to my mobile phone, but it continued to send it to the land line. Probably is something simple, but I am not a techy!!

Hi,
As regardss to the iChat and iChat Sharing categorisation you have used.
In iChat 6 (lion) and Messages (Mountain Lion) the apps login to AIM and to Me.com
The Login to Me.com allows AIM to verify the password to the iCloud issued names (@me.com and @iCloud.com)
This "Dual" login also prevents the newer iCloud issued name from using this site
(it has extra Privacy settings that iChat can't access for your AIM and Aim valid Accounts)
Ignoring the @mac.com and MobileMe entries in the Add Account Screen in iChat and using the AIM one does not get around this issue.
AIM and @mac.com names still work in older versions of iChat.
The short answer is that iCloud issued Apple IDs do not work in iChat 5 or Earlier.
10:12 PM Friday; February 15, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Just follow the directions here:
http://support.apple.com/kb/HT5661
That's all you have to do.

Anyone tried a Mobile Phone Signal Repeater

Similar Messages

Maybe you are looking for