Anyone tried a Noctua NH-D14 Cooler on a P45 Neo??

Hey guys, just wondering if anywhere is has tried a Noctua NH-D14 Cooler on a P45 Neo Motherboard. Reason why i'm asking is because it is quite a large cooler and want to know if it will fit it.
My CPU is a Q8400 Core 2 Quad 2.66Ghz and it gets to about 80C temperature on full load so i will need something pretty good for overclocking considering it's bad enough on stock speed.
Any recomendations?

Quote from: Bas on 18-October-10, 05:11:02
@Onslaught2k3, weird is you have problems booting.
What is that supposed to mean?

Similar Messages

Has anyone tried a 3rd party laptop cooling pad?

I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?

I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6)

Z97 Gaming 7 and the Noctua NH-D14

I own a Noctua NH-D14 and just got 2 sticks of Corsair Dominator Platinum memory.
I wanted to get the Z97 Gaming 7 motherboard for an i7 4790 CPU but I'm not sure if the spacing is great enough for the Noctua to clear the memory. Has anyone tried or know if it'll work? What if I put the Corsairs in the 2/4 slots, will that allow enough space?
I really don't want to give up the memory but have a feeling its just not going to work out with that cooler - which I definitely want to keep.
Any insight/suggestions are welcome!

I had the MSI Z97 Gaming 7.
On the board, it is written that you have to put your two RAM sticks in the 1st and 3rd slots, which can cause issues.
On the manual, it is written that you have to put your two RAM sticks in the 2nd and the 4th slots, which is more compatible.
I tried 2nd and 4th and it worked perfectly with my Dark Rock 3 (1mm free). But I don't know if it was the more efficient
Such a shame the board and manual say different thnings.

WinXP 64 Bit, Anyone tried yet????

Hi Guys,
Firstly, I fixed my problem I talked about in my last post.
Turned out the VGA Card was bad, I say bad, what I mean is, when you look at the card from the side (?) The contacts were worn out and wouldnt make contact with the VGA slot thus preventing the MB from powering up :o|
Beleive me, I was PISSED !!!!
Anyway, has anyone tried installing WinXP 65 bit extended version yet?
Would be nice to get some feedback as I have a copy and would like to find out if it is worth the hassle??
Not sure if there are enough drivers around.
I know that a few things have been left out of the system by the people at Mikey Soft.
What with the 32bit subsystem, have heard that 32 bit applications run slower than if i installed on regular XP ??
oh well.
K8N Neo Platinum
AMD 64 Bit 3200+ with Gigabyte Cooler Pro
1GB Kingston RAM
160 GB Samsung SATA
MSI WLAN Card
Sound Blaster 5.1 Digital
MSI FX5900XT VGA Card

The first time you re-installed Win 32 on the raid that was a bit drastic. A repair ought to have done the job.
The problem was probably that you disconnected the array but that's where the boot.ini was and that file needed to be modified to add the path to the Win64 install.
Since you took out the array the Win64 install created a new boot.ini on the PATA drive. Even when you tell BIOS to boot off the array, Windows has a bad habit of looking at the IDE channels & using the boot.ini if it finds one there - but the file it found didn't point to the array of course.
So basically if you already have Win32 on the array I would leave that array connected normally when installing Win64 on the PATA drive and all should be well.
I've installed Win64 on the same array as my Win32 install and they co-exist happily. I reckon that's the most efficient way to do it. The main thing is to make separate partitions for Win32, Win64 and data files when you install Win32 in the first place. The two OSs can share the same data files, incuding stuff like email.

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Has anyone tried

Post Author: Horizon57
CA Forum: General
Has anyone tried creating sections in a Crystal Report where analytic comments (or any sort of text) is fed in from a database. I am trying to build a report where users have entered comments (into an Access database) to accompany the charts and graphs on a report.
The main idea is to have these comments auto populate in the report when it is run just like the rest of the data fields.
Does anyone have experience with anything similar to this?
Mike

Post Author: V361
CA Forum: General
You can insert a section in a group (it will insert below whatever is already there), then drag the field into the report, select can grow, and see what you get.....

Has anyone tried disabling DART?

Has anyone tried disabling DART in the boot-args on an XSERVE running Tiger with 2GB RAM? Are there any effects on the PCI cards, except the obvious?
Roger

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Anyone tried different web browsers on the ipad?

HI,
I tried the ipad out today, and I couldn't get on with the safari browser. The back 'button' was in the wrong place for me as it's in the upper left corner of the screen, and I tend to hold the ipad with my left hand towards the bottom of the screen. I know it doesn't sound like a major issue, but as I'd be doing a lot of web browsing it was enough to put me off buying one, considering the price.
I've jsut found out (thanks to this forum) that there are other browsers for the ipad. Has anyone tried them, and how good are they? Is the back 'button' always in the same place, or is there one with it at the bottom of the screen?

plarkin wrote:
I just looked at the screen shots for the browsers I mentioned in the other thread. It appears that in the Atomic browser, the back/forward buttons are on a bar on the lower left portion of the screen. Perhaps someone who has the Atomic browser installed can confirm.
Thanks, just youtubed it and it is on the bottom left. Looks more like the safari on the iphone where the back/forward buttons are much better placed. I wonder why they changed this for the ipad safari?

Anyone tried SheepShaver PowerMac Emulator?

Last week I had a old FH8 file that would not open in FHMX.
FHMX kept
crashing. (Probably a font problem.) Because my PowerMac G4
will still run
Classic OS, I was able to fire up FreeHand 8 and open the
file without
difficulty.
I'm a bit worried that when I get an Intel Mac, I won't be
able to rescue
some of my old files.
Has anyone tried running older versions of FreeHand under
SheepShaver on an
Intel Mac?
http://uneasysilence.com/archive/2006/08/7352/
Judy Arndt

In article <C46C8073.2A8BA%[email protected]>,
Judy Arndt <[email protected]> wrote:
> Has anyone tried running older versions of FreeHand
under SheepShaver on an
> Intel Mac?
No.
Some time ago I asked a similar question on Adobe's ATM
forum, and while
no one had any experience with Sheep Shaver, their advice was
to just
keep an old Mac around that boots into OS 9.
ATM is required and doesn't even work too well under Classic.
But since there won't be any more versions of FH and even MX
runs well
on G4s, why upgrade at all?
Cheers Martin

Anyone tried a Noctua NH-D14 Cooler on a P45 Neo??

Similar Messages

Maybe you are looking for