Anyone tried any of the Powersupport Anti-Glare Filters?

I ask because I know they're making ones for the iMac, and I was wondering if any MacBook owners here have put one of the MacBook ones on their screens? And if so, are they any good?
Message was edited by: Ronson

I don't believe you can clean the side that touches the screen of the iPod Touch. But here is the process I followed to get mine set without dust or bubbles.
First use a microfiber cloth to clean the touch thoroughly. This should remove almost if not all of the dust. If there is still dust use compressed air to remove the remainder.
DO NOT REMOVE THE ENTIRE FILM. Very important. Peel back one corner and get the screen film lined up. Once you are happy with the placement pinch the Touch so the exposed corner of the film makes firm contact the the Touch. Slowly lift the opposite corner of the film and grasp the protective layer, slowly pull it off and smooth the Anti-Glare film onto the front of the Touch.
This is similar to applying window tint. You can probably find a video on the net. This is the same technique used to apply graphics stickers to cars and windows.

Similar Messages

Has anyone tried any of the ihealth accessories?

I was looking at some of the ihealth accessories, but don't know how good they are. I don't want to spend money on things that are not good quality. Has anyone used any of the ihealth accessories?

i have a K8T and use the zalman cnps7700
http://www.tomshardware.com/2005/06/07/10_mammoth_cpu_coolers/page15.html
if you're running 2 stick of ram in dual, the stick closest to the cpu socket is a very tight fit if you add the ram after the cooler but it's a great cooler IMO
my load temps hover around 42C that's with a 3200 venice @ 2.6 with the fan running @ 1200rpm .. nice and quiet

Cleaning the PowerSupport Anti-Glare Film

After well over an hour trying to get the film positioned properly without bubble I finally succeeded...almost. Even though I used canned air to blow off the dust, etc., I managed to get a few dirt particles trapped between the film and iPod. They were small enough not to be a problem themselves, but they did cause small bubbles around them. At $15 a pop, it is too expensive to scrap. Does anyone know some way to clean the side of the film that touches the iPod screen? Canned air doesn't work.

I don't believe you can clean the side that touches the screen of the iPod Touch. But here is the process I followed to get mine set without dust or bubbles.
First use a microfiber cloth to clean the touch thoroughly. This should remove almost if not all of the dust. If there is still dust use compressed air to remove the remainder.
DO NOT REMOVE THE ENTIRE FILM. Very important. Peel back one corner and get the screen film lined up. Once you are happy with the placement pinch the Touch so the exposed corner of the film makes firm contact the the Touch. Slowly lift the opposite corner of the film and grasp the protective layer, slowly pull it off and smooth the Anti-Glare film onto the front of the Touch.
This is similar to applying window tint. You can probably find a video on the net. This is the same technique used to apply graphics stickers to cars and windows.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Has anyone tried to get the customer_id/site_id in ireceivable module?

Has anyone tried to get the customer_id/site_id in ireceivable module? Please let me know which class to look into to get the cust_account_id and site_id/site_use_id in ireceivable module. We need to control the access in our custom pages based on the user access (at the customer account level or only at the customer site level).
Thanks,
AJ

I saw the set hibernet mode to 0 trick and it failed. Guess I can try 3 because reinstalling OS X did nothing but cost me another few hours and a little faith in Apple. Getting annoyed as I see how many people complain of the identical issue and the fixes are variable and random. Suggests to me that it is a major design flaw in the hardware and Apple got too cute with the just works idea and didn't put a damned power button on the display so there is no manual way to do it and no 'insert a pin here' type trick to reset the thing.
Asking for a refund tomorrow. Past the 14 days so maybe they'll say no but if so then every time this happens I will swap it out. At least then I know it is a three hour fix and as I was working on this for hours today it occurred to me that if the trick is to do 57 different things and maybe one will work then that is not why I made the switch to Apple. I could plug everything in on my PC and it all 'just worked'.
Really poor customer service - the support folks are very nice and I am sure they know that this is a systemic issue but aren't allowed to say so. Feeling pretty stupid for going on faith right about now.

Has anyone had any of the iLife programs crash on them? especially imovie 6

Has anyone had any of the iLife programs crash on them?
I have had my new intel imac 20" for 2 weeks now and i like it a lot...
except I have been getting crashes on imovie (especially), and garageband.
I have had about 10 crashes total so far in about 2 weeks.
Is this sound normal?
thanks, technoreid

How much spare hard disc space have you got? ..Could your disc be so clogged that there's no room for any more movie?
You'll need about 10% of your total hard disc space - e.g; 6GB for a 60GB hard disc - to be kept empty for your Mac to do its "housekeeping" (..creating temporary files, indexing things, and so on..) and iMovie footage uses about 13GB per hour of video.
So if you have a 60GB hard disc, and it's only got 15GB spare, then 6GB of that will really be needed by the Mac itself, giving you about 9GB of usable space, and if you import half an hour of video (6GB) and start cutting it around and editing the audio too, and duplicating a few clips, and adding stills, you're soon going to run out of space!
If your Mac's disc is almost full, you'll probably need to get an external FireWire disc ..say a 160GB or similar size.. then format it as 'Mac OS Extended' (..by selecting that add-on disc and using the 'Erase' tab in the Disk Utility program..) and then you can copy your project over to that new, empty disc, and continue editing it there.

Has anyone had any of the iLife programs crash on them?

Has anyone had any of the iLife programs crash on them?
I have had my new intel imac 20" for 2 weeks now and i like it a lot...
except I have been getting crashes on imovie (especially), and garageband.
I have had about 10 crashes total so far in about 2 weeks.
Is this sound normal?
thanks, technoreid

hi~!
(que mas?)
well, i don't think its that normal...
i have iLife 05 and it didnt crash yet...
which one did u say u had? iLife 06?
and i guess that if u go to the iLife Forum, u might get a better and precise help....

Is it possible to reset an iPhone 3GS when anyone tryed to unlock the mobile. I wanted to use the Phone with the correct Provider.

Is it possible to reset an iPhone 3GS when anyone tryed to unlock the mobile. I wanted to use the mobile Witze the correct Provider.

If it was unlocked by unauthorized means it may not be possible to remove the hack; it depends on how it was done. Try this: http://support.apple.com/kb/HT1808
If you get error 3194 or 1015 then it is not possible.

Has anyone tried BIM360Glue on the iPad mini?

Hi all - We're using BIM360Glue on iPad 3's at the moment with great success, but I'm wondering if anyone has used it on a Mini, and if so whether anyone has any feedback on it?

I have...I am noticing a delay in the preset selection for editing my work in LR. Sliders are ok...but copy and pasting edits or preset selections for files is delayed. Trying to find a solution.

Has anyone tried to use the example XMLResourceAdapter?

I get various java errors when trying to use the sample XML file resource adapter code supplied in the /idm2525/REF folder.
I believe my java environment is Ok. I compiled the XMLResourceAdapter.java as per instructions. I get the 3 class files.
I add these to the IDM configuartion as per instructions and add the custom resource adapter again following instructions.
Things went ok. I can see the XML resource in my resource list. The only problems I get are when I try to use this resource.
When adding the XML File resource to an existing IdM account I get error:
java.lang.NoSuchMethodError: com.waveset.object.ResourceInfo.getPassword()Lcom/waveset/security/authn/EncryptedData;
Has anyone any clue where to start looking to correct this?

Hi Eric
thanks for your answer.
As far as I know, the INTERNAL CPU to GPU data transfer speed is way faster than the speed you can obtain via thunderbolt, so it doesn't matter what GPU you put in an external thunderbolt case, you won't benefit on any speed increase.
But still when I goggle this subject I find people saying that they edit and render much faster with an external thunderbolt case and GPU.
So I thought about trying to find the "truth" here on this forum.
Anyone else wants to share his/her experience?
Thanks

Anyone tried to download the Dell DJ firmware to use with their Zen Tou

I've been reading on the boards that these two devices are quite similar, so I was wondering if anyone has tried downloading the PlaysForSure firmware for the Dell DJ and tried to use it on the Zen Touch?
I've been sitting on an un-opened Zen Touch (which I recieved for my birthday two months ago), trying to decide whether to trust that the firmware will be released and open it OR return it and purchase something that will work immediately with my Yahoo! Unlimited subscription. Anyone have any advice? I really do want to open it, but I don't want all the songs that I've downloaded via subscription to go to waste. I DON'T KNOW WHAT TO DO! HELP!

You can't use the Dell firmware on the Touch.

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Apple should really come up with a dual sim card. Has anyone tried to use the dusl simcard adaptor?

I see many ads for the dual sim adaptor, also it is being sold on some flights. Has anyone tried one? Instead of putting better cameras on their iPhones, Apple should really concentrate on making a phone with dual sim cards ( without asking exhorbitant prices) which will make travelling so much easier.

Tell Apple:
http://www.apple.com/feedback/iphone.html

Has anyone tried to deploy the Jasmine sample of Matering EJB on WLS?

Hi,
Has anyone ever tried to deploy the Jasmine sample from Chapter 17 of Matering EJB 2nd Edition to WebLogic? Can you share how to do that?
Thanks a lot.
Iris

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried to 'adapt' the site wizard form?

I'd like to add some extra fields to the basic form - has anyone tried this at all?

Ah-ha Thank you the _shocker, basically I have added a number of extra fields now into the sitewizard template but need to know how to link up the php scrip...
My html is:
<div id="apDiv7"><form action="feedback.php" method="post">
<table width="852" height="409" border="0" cellpadding="6" cellspacing="6">
<tr>
<td align="right"> </td>
<td> </td>
<td align="right"> </td>
<td width="256"> </td>
</tr>
<tr><td width="122" align="right"><label for="tswname">*Name</label>
:</td>
<td width="217"><input name="fullname" type="text" id="tswname" onblur="MM_validateForm('tswname','','R');return document.MM_returnValue" size="30" /></td>
<td width="186" align="right"><label for="tswchildsname">Childs Name</label>:</td><td><input type="text" name="childsname" id="tswname2" size="30" /></td>
</tr>
<tr><td align="right" valign="top"><label for="tswaddress">Address</label>:</td><td><textarea name="address" cols="23" rows="3" id="tswaddress" address="Address"></textarea></td>
<td align="right" valign="top"><label for="tswstartage">
<br />At what age would you like your child to start?</label>:</td><td valign="top"><p>
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_0" />
    2 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_1" />
    2.5 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_2" />
    3 years</label>
<br />
</p></td>
</tr>
<tr><td align="right" valign="top"><label for="tswphone1">*Phone number<br />(home)</label>:</td><td><input name="phone1" type="text" id="tswphone1" onblur="MM_validateForm('tswphone1','','R');return document.MM_returnValue" size="30" /></td>
<td align="right"><label for="tswchilddob">Childs date of birth</label>:</td><td><input type="text" id="tswdob" name="childdob" size="30" />
</tr>
<tr><td align="right" valign="top"><label for="tswphone2">Phone number<br />(mobile)</label>:</td><td><input type="text" id="tswphone2" name="phone2" size="30" /></td>
<td align="right"><label for="tswcomms">*Preferred method of communication</label>
    :</td>
<td><p>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_0" />
      phone</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_1" />
      email</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_2" />
      mobile</label>
</p>
<tr><td align="right" valign="top"><label for="tswemail">*Email address</label>
      :</td><td valign="top"><input name="email" type="text" id="tswemail" onblur="MM_validateForm('tswemail','','RisEmail');return document.MM_returnValue" size="30" /></td><td align="right" valign="top"><label for="tswmessage">Message </label>:<br />
<br />
<br />
<br /></td><td><textarea name="message" cols="23" rows="3" id="tswmessage"></textarea>
</tr>
<tr>
    <td height="41" align="right"> </td>
    <td valign="top">* Denotes required field</td>
    <td height="41" align="right"> </td>
        <td height="41" align="center" valign="top"><input type="submit" value=" Send " /></td>
</table>
</form>
</div>
and the generic php script that I need to adapt is:
[Copyright script deleted by moderator. The script's terms of use state explicitly that it cannot be reproduced or distributed,.]
I just don't get which bit of the php I need to change to add in the extra fields that I require...

Anyone tried any of the Powersupport Anti-Glare Filters?

Similar Messages

Maybe you are looking for