Anyone tried Digital Rapids for encoding?

My 15 minute HD projects is now in its 7th hour of ten to convert to Flash 8. Has anyone tried the Digital Rapids real time PCI capture card? Is there anything else on the market that can take a component signal and convert it to multiple formats at the same time?

I don't see any Macintosh support for that product.

Similar Messages

Does anyone tried the invinsibleshield for macbook? Any comments? :D

Here's the link,
http://www.gearzap.com/invisibleshield-for-macbook-pro-13-inch.html

I have the defender series (I have both the black and yellow/black). It's an awesome case. It's sturdy and best protects the phone (I've tried a slew of other cases).
I bought the original versions and the cases fell very short of the expectation. They felt cheap, the silicone jacket was loose and gapped and the case was very difficult to remove from the holster. After I called OB to complain, they offered to ship out replacement cases of the revised version. I didn't even have to ship back the original cases. Their customer service is awesome! Anyway, I got the revised versions and they are great. The hard shell is sturdier, the silicone jacket is a more rigid material and stays in place (plus it doesn't pick up as much lint as before) and finally it's no problem getting it out of the holster. You still can't use the silent switch on the phone through the case but that was never a big deal for me because I just turn the volume all the way down and I'm good to go.
The clear membrane doesn't inhibit the touch screen at all. You can sync/charge with the case on. I rarely take the phone out unless I'm switching to my other defender case. The phone stays nice and snug-doesn't move around in the case.
The case undoubtedly adds a little bulk, BUT, it doesn't bother me. I'd rather have a little added bulk with the peace of mind that my phone is very well protected and still functional through the case.
IMHO it's the best case out there for top notch protection.
Hope this helps.
iPhoNettie

Streaming from Digital Rapids to Flash Media Server

Hello,
I am using a Digital Rapids StreamZ encoder (version 3.8.0) to stream towards YouTube, Dailymotion, Akamai. I wish to install a Flash server on the same VLAN as my Digital Rapids in order to check the encoding in case there is an issue on YT/DM's side. I therefore downloaded Adobe Flash Media Server and now wish to send my stream towards the AMS. Which Server URL and Stream Name should I use to configure my Digital Rapids? How should I configure the AMS to receive the stream from the DR?
Many thanks in advance for your help and advice,
mdicamp

The Digital Rapids doesn't seem to recognize my destination Server URL. I guess it is because of a port issue.
Checking the ports situation on my AMS Server (cmd -> netstat -an), I realise port 1935 (which receives RTMP) is only listening locally (127.0.0.1:1935) instead of to the exterior (I would like to have 0.0.0.0:1935). The application does not seem to have forced the port to open (I don't have any firewall).
I hope this helps move anyone forward in helping me out. Thanks in advance !

Has anyone tried a Western Digital SATA RAID hard drive on a non-RAID controler?

Because of a compatability problem, I want to try a different brand of SATA II drive on my non-RAID motherboard. The WD RAID drives have great specs but I don't know if they will work. WD says they are ONLY for RAID and not to put them on a non-RAID board. My theory is that they will be more reliable over the long term because they are a heavier duty drive.
Has anyone tried this and if so, what were the results?

I think there was some confusion about what I am asking. It is definately not a duplication of my other post and some of the information in that other post is incorrect because I JUST found out that my motherboard controller IS a RAID controller even though I am not using it as one. I will correct that when I am finished with this post.
The other post was about a specific model of Maxtor drive that doesn't work on my motherboard. This post is about Western Digital. The only reason that I even mentioned the word RAID in my previous post is that there is a known compatibility problem with RAID controllers and that drive. I wanted to emphasize that my problem was not the one of that known compatibility problem, but because it is a RAID controller, it might be that problem.
When you use the motherboard's controller as a non-RAID controller, you do format the drives individually, not as a RAID. I know that because I did it that way, not realizing I even had the option of using RAID on this board. That works fine on one model of Maxtor hard drive and does not work at all on the other model of Maxtor hard drive.
What I want to know now is: Will the Western Digital RAID drives will work on a non-RAID controller. The controllers on my add-in card is not RAID. Also, will that drive work on my motherboard's controller even though it is not being used as RAID.
Here is a link to the WD site's description of one such drive. There are several other WD RAID drives, this is just one example... http://www.wdc.com/en/products/Products.asp?DriveID=238&Language=en It does not state whether or not they will work well in a non-RAID environment.

I am trying to burn a dvd and it will not allow me to do this because it states that i do not have enough space for encoding disk. how do i free up space and from where?

I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?

iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space".

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

HT1386 After updating my I phone 4s and I tunes, it downloaded my entire I tunes library to my I phone. I do not wannt all this music on my phone and have tried every thing to correct this with no results.Does anyone have a solution for this

After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone

BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared

I have tried all sugestions for how to charge my ipad 2 that no longer charges, and nothing seems to work, can anyone offer any new advise?

I have tried all sugestions for how to charge my ipad 2 that no longer charges, and nothing seems to work, can anyone offer any new advise?

While both the iPhone and the iPad use an Apple dock cable for charging, the iPad wants a 1100 mA charger, and the iPhone charger's a 500 mA charger. USB ports on newer Apple computers can switch into 1100 mA mode, but your average computer is going to put out no more than 500 mA and, possibly, quite less (for example, an un-powered USB hub will only put out 100 mA or so, and an iPad won't charge off that). The iPad will say "not charging" if it is trickle-charging (receiving less than 1000 mA of power).
If the problem persists when using the 1100 mA iPad charger, you need to take it to an Apple store and have it serviced or replaced. Bring the iPad charger that you received with the iPad as it may be that the charger is defective and not putting out 1100 mA.
If the problem is that it charges slow because it's being connected to iPhone chargers or PCs or older Macs, then it's not a problem with the iPad. It's charging, it just takes a long time because you are using an under-powered charger.

Has anyone tried iUsers for sharing an iPad?

Trying to figure out the best way for my wife and I to share an iPad. There is a free download called iUsers that seems to have the right functionality, but the user reviews are from mid-2011 when it was still in Beta.
Has anyone tried this more recently? Would like to know your experience.
Jim

Honeycroft wrote:
I'm interested to hear the merits of jail breaking? Why can't it be discussed James, it's a free world!
Because it is contrary to the term of use you agreed to when you registered for this forum and began posting. If you want to know more it, you will need to go elsewhere.

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport

Anyone tried the next-day-retail-pickup option for an iPhone 5?

Has anyone here tried the next-day-retail-pickup option for an iPhone 5?
Has anyone tried it - but still not gotten one?
Right now I have my iPhone 5 ordered online through Apple.   It's not expected for a few more weeks, alas.
Two days after I placed that order , Apple announced that you could order online after 10pm for next day pickup at a retail store.
I called Apple to ask if I could simply "convert" my existing order to a next day pickup.
I was told that I'd have to (1) cancel the online order (2) maybe wait a day for my upgrade-pricing eligibility to reset and THEN (3) place the order online after 10pm.
BUT - she also added that even the next-day-pickup orders were subject to stores' inventory.
So, I called my local store to ask about availability.   Rather than telling me anything about their current inventory, the gal there just repeated that I should order online after 10pm.
Of course, the entire point of my doing this would be to reduce my wait time (not roll the dice on MAYBE reducing my wait time.)
Yet apparently my only option is to "step out of line" with my existing online order before I can even see how long the line is for in-store pickup.
If it turns out I'll have to keep trying again every night after 10pm in the HOPE that maybe this time there'll be an iPhone 5 available for the next day, then I go from my current 2-3 week wait to a god-only-knows-how-long wait, with nightly online order attempts.
There's no way for me to adequately express my distaste for this catch-22 without using verboten language.
If anyone has an idea how I can TRY the next-day-pickup trick WITHOUT first squandering the 2 weeks I've already been in the online queue - please let me know.

i have the same dilema brian. Does anybody know how many reservations there are a day?
What are the odds of getting a space?
I might as well enter the x factor phone in and hope i win!!! f'ing joke.
I'm going to phone local store and ask how many iphones are sold each day.
Meanwhile wait 4 weeks for online order. Ha!

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

HT1583 I'm trying to burn a Magic DVD in iDVD and I get a message stating "not enough free disc space for encoding the remaining assets. How do I resolve this?

I'm trying to burn a Magic DVD in iDVD and I keep getting a message stating that there is not enough free disc space for encoding the remaining assets. How do I resolve this?

It means your hard drive is too full to accomodate the project and its many swap files etc.
You need to move some files (not applications) to your external hard drive, and keep at least 25-30GB free.

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Anyone tried Digital Rapids for encoding?

Similar Messages

Maybe you are looking for