Anyone tried new firmware (1.15.01) for muvo tx

Did
Is it better than later (.3.03)?

I installed the latest firmware .5 but it didn't make any difference. The player skipped for the first time during mp3 playback after the installation but I don't know if I have to blame the firmware.
Anyway I have the feeling that I was better off with the .3 version. If you don't have problems with your firmware you don't have to upgrade, at least not if you don't have the previous version installer to go back just in case!

Similar Messages

  • Anyone tried new firmware 1.03.3 on WRT300N

    The release information shows there is an enhancement on range performance. Anyone tried that, and share the experience? Thanks.

    Mine is v1.0....
    But this firmware is for v1.0, right?
    Message Edited by petermok on 01-24-200703:39 PM

  • New firmware version is out for Megastick 128

    There is a new firmware version (2.05)  for the Megastick 1 (128). Get it from Megastick 1 firmware page

    I upgraded it and didn’t see any major differences. However now there are many volume steps. Apart from that I noticed that when the radio is not tuned to a proper channel there is no noise, not a useful thing but those are the only differences I saw. Still cant record in 44k (records in 22k format). Anyone tried it and saw anything different ?
    One other thing, I don’t know whether this existed in earlier firmware versions, when you have a normal file which is not an MP3 file with the .mp3 extension you cant turn it on. I came across this when I tried putting several non MP3 files (ogg ) having the mp3 extension after .ogg didn’t work to see whether they have added support for new standards (Slim chance but who knows…   )

  • Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

    Mail Merge in Acrobat 9 Professional?
    Hi, All!
    I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
    I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
    I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
    http://www.evermap.com/automailmerge.asp
    Has anyone tried this? Does it work? Will it do what I'm looking do? 
    Please help!
    Thank you!
    Chistina

    there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
    http://youtu.be/gNOfgBClIvQ
    http://youtu.be/qKhmZbVgywk
    http://youtu.be/eeQzOycTlOU
    http://youtu.be/RS5Ct3I8Yrs
    … in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
    I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

  • Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

    Hi I am facing  some bug in new Firmware V50.0.005
    1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
    2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
    3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart  your phone to close that radio application. (no other go)
    If any Solution is there for this please let me know.
    Thanks in advance
    Ssandesh T S

    For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
    For the music library:
    1. Connect your 5800 to you PC in Mass Storage Mode
    2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
    3. Open your SD memory card/Removable Disk in My Computer on PC
    4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
    5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
    6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
    7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
    8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • New Firmware 1.17.04 on MUVO TX

    Hallo,I downloaded today the new firmware version (.7.04) of this GREAT PLAYER but, when I tried to update, i received an error cause the player wasn't in Recovery Mode.
    Can you help me?
    I think the MUVO TX FM hasn't the Recovery Mode Option. I've read the firmware instruction and is explained how to update and how to start the recovery mode but i receive every time an error cause the player is not in Recovery Mode, so i can't update the firmware.
    Has anyone tried to update to this new version?
    The old firmwares were perfect and i used them simply starting the application but i've never seen this Recovery Mode function (now i've the .5.0).
    Thanks a lot for every response.
    Bye!

    <FONT face=Verdana size=3>Yes, i tried another time and i flashed successfully my Muvo. My error was, when i was connecting to the PC, i didn't keep pressed (:smileytongue the PLAY button for 0 seconds to enter Recovery Mode.
    <FONT face=Verdana size=3>Thanks a lot.
    <FONT face=Verdana size=3>After flashing the firmware, the maximum volume level is modified from 40 to 25 but I think is optimized, I listen the music and the radio PERFECTLY.
    <FONT face=Verdana size=3>
    <FONT face=Verdana size=3>Bye all :smileyvery-happy:!
    <FONT face=Verdana size=3>

  • Nokia`s New Firmware (Version 30.033) for Nokia N9...

    I updated my Nokia N96 to the latest updated version 30.033, which has caused my camera not working anymore. When I press the camera button it says (Camera Feature Not Supported) and the phone hangs until restarted. I “Hard Formatted” my phone but the problem still persists. I took it to a software engineer who tried to bring it back to the previous version through downgrade, which proved unsuccessful and the phone went to "white screen". My phone is still lying there for software repair from three days.This new version from nokia has really destroyed my great set. If anyone has any idea for fixing this problem then let me know.
    Message Edited by amorenaz on 08-Jan-2010 10:16 AM
    Message Edited by JonTheGreat on 08-Jan-2010 02:42 PM

    Well it's not an new upgrade,
    There have been a few reports of this issue but it appears to be relativly rare, most people update ok
    Usualy a full multifingered hard reset clears it, and if not a nokia care point can fix the issue under the warenty
    however your freindly software engineer, unless he is a nokia authorised repairer, has voided your phones warenty and probably killed it
    you can try the multifingered reset otherwise you can take it to a nokia care point and beg  them to take a look, they may fix it but you will probably be charged

  • New firmware v42.0.004 for C6-00

    >>camera bug fixed in mine.
    >>Little bit fast performance.etc.

    Seriously no performance improvements in v42 I've tried it - its just that we feel there is a bit improvement in performance with every update though that ain't true .... The only improvement i noticed is the new browser with browser bottom buttons bug fixed... And low ram is not a gardware issue if they have put low ram chip inside the device then they should have optimized the software to handle it ... The os itself takes damn 80 mbps of available ram how can you justify it

  • New Firmware (3-2-9) for Canon D1 (iii)

    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct& fcategoryid=314&modelid=14999

    mundigranja wrote:I solved it by adding brcmsmac in MODULES section in /etc/rc.conf
    Yep, that's working ! I added rtl8192ce to the MODULES section of /etc/rc.conf and now the system is booting quite fast again.
    /var/log/boot shows:
    Sun Jan 15 12:04:49 2012: :: Adjusting system time and setting kernel timezone
    [BUSY] [DONE]
    Sun Jan 15 12:04:49 2012: :: Starting UDev Daemon [BUSY] [DONE]
    Sun Jan 15 12:04:49 2012: :: Triggering UDev uevents [BUSY] [DONE]
    Sun Jan 15 12:04:49 2012: :: Loading User-specified Modules [BUSY] [DONE]
    Sun Jan 15 12:04:49 2012: :: Waiting for UDev uevents to be processed [BUSY] [DONE]
    and in dmesg:
    [ 6.547970] rtl8192ce 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.547980] rtl8192ce 0000:08:00.0: setting latency timer to 64
    [ 6.875461] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 6.876544] rtlwifi: wireless switch is on
    [ 14.526217] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
    [ 14.977485] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
    [ 22.459984] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
    [ 39.089139] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
    So, this seems to be a good workaround

  • To Nokia: will there be a fixed/new firmware for E...

    Last week I updated the firmware of my E61 to version 2 and I really regret it. (is there anyway of going back to the old firmware? ) I cant stand pressing blue function key when I browse the web on my E61 every single time I want to use a shortcut, it gets reallllly annoing after a few times. I think most of E61 users will agree with me that this 'bug' ruined this update. Also there seems to be a problem with mp3 player. When an equaliser preset is active it goes off every time you change the song and you have to press volume up or down in order to set it on active again. I know there are more bugs in this new firmware but I think those two I mentioned are bothering me the most. I would also be very very thankful if the new firmware will have support for PAP for EAP-TTLS. (or maybe a separate plugin ?) any replies are welcome (especially from the Nokia staff )

    The iPad 4, which is now also called the iPad with retina display, essentially replaces the iPad 3, which is no longer available except as a refurbished product. The naming is confusing, as both the iPad 3 and iPad 4 had a retina display. The iPad 4 has the same price points but with a fater processor, better Facetime camera, lightning connector, and faster wi-fi. As soon as it came out yesterday, the iPad 3 was removed from the Apple store. It has essentially been discontinued.
    People who bought the iPad 3 within the last 14 days can return it no questions asked. There are stories about some stores allowing an exchange for the iPad 4 if you bought the iPad 3 within the last 30 days, but there's nothing official from Apple on that, and it seems to vary from store to store. I called my local Apple store, and they said no, but I'm waiting for a call back from a manager to confirm this.
    I think you may be out of luck trying to return or exchange it at the Apple Store, but you can look a selling it and putting the money toward a new model. Here's a link to an article with some info that may help:
    http://9to5mac.com/2012/10/24/top-places-to-trade-a-third-generation-no-so-new-i pad-for-cash-or-credit/
    Good luck. It's definitely a lousy thing for Apple to do to iPad 3 users.

  • New firmware for N73ME????????????

    hi,
    i heard that a new firmware has been released for N73ME/N73 4.0839.42.0.1. I am in india and for my product code(0543843) this firmware is not available still i get the old one 4.0812.4.2.1, has anyone in india have done this and my provider is Airtel is that something to do with my provider, even the old firmware for my N73ME was not available for a long time after NOKIA released it, or NOKIA releasing the firmware late for India why because i have read that some firmwares are location dependant
    Any comments on this will be appreciated
    cheers........ 
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

    Thanks for your reply Petrib
    But one thing amuses me here is i am not on contract with my provider(Airtel) and i am a prepaid user if i am not wrong can i use a SIM card of any other provider say Vodafone and try to do the update
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • New Firmware Update for Nokia N95 (RM-159 ) :Decem...

    Hello All,
    It looks like new firmware update is available for Nokia N95 basic model .
    Earlier Version of Firmware was : 30.0.015
    Now the latest available Firmware was : 31.0.014
    When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
    I will wait for 2 more days for official communication from Nokia....

    Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
    Somebody should shine a light on this FW, or nokia has
    done a lot of work for nothing!

  • New firmware for Nokia E90

    Today I received a notification that a new firmware revision is available for the E90. It is listed as version 200.34.73
    My current version is 07.40.1.2.
    Did Nokia make a tremendous leap in versions (07->200) or is this an error?
    Furthermore, if this new version is the correct one, can someone tell me what the changes are?

    @ gemini632003
    Windows Vista is just one of several Operating systems for PCs
    It is relatively new ..The most widely used OS is XP and that is the OS that Nokia first address.
    Perhaps if you ask Bill Gates to be more forthcoming with the code for his Vista OS it would be easier for Nokia to be 100% compatible with all Windows OS.
    Also the latest FW is not yet available for all variants of E90.
    If your PCs NSU is not finding and up date for your phone it could be that the code indicates that there is not yet a new FW available.
    I am still using FW V07.24.0.3 June 2007. it work just fine.
    Nokia..."ignores the needs of it's consumers.!"...???
    So how did they manage to get 40% of the world market.?

  • New firmware for Nokia 5800 - 21.0.025 !!!

    NSU reports a new firmware 21.0.025 for product code 0581337.
    I think this product code is for HK phones.
    Nokia N8 / N9 / Lumia 920 White

    sherb wrote:
    grayburn wrote:
    shayesta wrote:
    v21 is really good. Adds three touch buttons on main idle screen. Performance is great. very fast at responding to touch sense.
    This was released by nokia 2 months back lol and it just getting released on NSU now lol.
    I don't think so!
    The one that ws released 2 months back was 21.0.018 for testing
     We're not talking about the test version though are we, we're talking about the version thats going to be released for all 5800 owners....not testers.....and this version HAS NOT got three buttons on the home screen, although performance is much much better as you stated (i updated to it earlier).
    Message Edited by grayburn on 21-Apr-2009 09:59 PM
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Maybe you are looking for