Anyone tried the Virtualbox OVA's in Linux OS Host?

Hi, I'm asking these because I only receive VERROR_ZIP's for the FSCM92 853 when I try to import the OVA in a Virtualbox for Linux , I checked the MD5 of each zip file and were correct. Also I unpacked the OVA to check the OVF file and open it and same error , and lastly I created a similar machine as the OVF and point the disks to the VMDK's and it booted but when starts the SES configuration shows errors of disk as if the vmdk is corrupted .
Any ideas? I'm using VBox 4.2.12.
best regards
Edited by: 1002933 on Apr 27, 2013 8:15 PM

Hi, Thanks for answering ..
I tried first with Arch Linux 64bits, now I'm going to try in a OEL6 box.
The command to extract is just an : unzip FSCMDB-SES-85302d_ova_?of?.zip for each file
Concat as the Guide PDF mentions :
cat FSCMDB-SES-85302d.ova_1of7 FSCMDB-SES-85302d.ova_2of7 FSCMDB-SES-85302d.ova_3of7 FSCMDB-SES-85302d.ova_4of7 FSCMDB-SES-85302d.ova_5of7 FSCMDB-SES-85302d.ova_6of7 FSCMDB-SES-85302d.ova_7of7 > FSCMDB-SES-85302d.ova .

Similar Messages

Has anyone tried the Normalizer app?

Has anyone tried the Normalizer app? We are looking for something that will normalize job level for us. The only app I have found was the normalizer and a lot of the links on their website don't work and it doesn't look like they have has any activity on their site for over 6 months.

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

Has anyone tried the Yosemite beta?

Has anyone tried the Yosemite beta? Or shall I just wait for the official version to come out?

Beta OS software should only be installed on a test machine, NEVER a primary device, and honestly only by someone with a compelling reason (testing, development).
Yes, wait for final version this fall.

Anyone tried the new BIOS 1.4 for K8N Neo4 Plat?

Has anyone tried the new 1.4 BIOS for nVidia K8N Neo4 Platinum? Does it fix the 220Mhz bug? Does it worth it at all? I am currently with ver.1.1 and running at 2453Mhz at HTT=4, Multi=11, FSB=223, V.Core 1.375v +3.3%, Memory 2.7v at 2-3-3-6-1T
AMD 64 3500+ Winchester
K8N Neo4 Platinum
Corsair Twinx 2x512
NEC ND-3520a
Sapphire Radeon X850XT
Enermax 485W
WD Raptor 74GB

Bios 1.4 Final Works fine on my system....
HTT=2, Mult=11, FSB=237, VCore 1.425 + 9.9%, Memory 2.8V at 2.5-3--3-7-2T 4x 512 (2 x 512 Corsair C2Pros)+(2 x 512 Crucial Ballistix Tracer) 2 Gig Total....
Psygnosi

Anyone tried the next-day-retail-pickup option for an iPhone 5?

Has anyone here tried the next-day-retail-pickup option for an iPhone 5?
Has anyone tried it - but still not gotten one?
Right now I have my iPhone 5 ordered online through Apple.   It's not expected for a few more weeks, alas.
Two days after I placed that order , Apple announced that you could order online after 10pm for next day pickup at a retail store.
I called Apple to ask if I could simply "convert" my existing order to a next day pickup.
I was told that I'd have to (1) cancel the online order (2) maybe wait a day for my upgrade-pricing eligibility to reset and THEN (3) place the order online after 10pm.
BUT - she also added that even the next-day-pickup orders were subject to stores' inventory.
So, I called my local store to ask about availability.   Rather than telling me anything about their current inventory, the gal there just repeated that I should order online after 10pm.
Of course, the entire point of my doing this would be to reduce my wait time (not roll the dice on MAYBE reducing my wait time.)
Yet apparently my only option is to "step out of line" with my existing online order before I can even see how long the line is for in-store pickup.
If it turns out I'll have to keep trying again every night after 10pm in the HOPE that maybe this time there'll be an iPhone 5 available for the next day, then I go from my current 2-3 week wait to a god-only-knows-how-long wait, with nightly online order attempts.
There's no way for me to adequately express my distaste for this catch-22 without using verboten language.
If anyone has an idea how I can TRY the next-day-pickup trick WITHOUT first squandering the 2 weeks I've already been in the online queue - please let me know.

i have the same dilema brian. Does anybody know how many reservations there are a day?
What are the odds of getting a space?
I might as well enter the x factor phone in and hope i win!!! f'ing joke.
I'm going to phone local store and ask how many iphones are sold each day.
Meanwhile wait 4 weeks for online order. Ha!

Anyone tried the new Weblogic Scripting Tool (WLST)?

Has anyone tried using the new WebLogic Scripting Tool (WLST) that was recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running server.
It also has a nice scripting tool which allows you to convert a config.xml file
into a script that can be run to recreate a domain or specific resources within
the domain. This is exactly something I have been looking for because we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part. The only
issue I have run into so far is that is does not seem to understand JMS Distributed
Destinations. When I try to convert a config.xml that contains a DD to a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential that
BEA will support this in the future if it catches on? Has anyone had experience
with WLST or jython that would cause you to reccomend (or not) using it?
Thanks.

Darryl,
Thanks for the valuable feedback. My comments are inline.
Darryl Stoflet wrote:
As a fairly long time wlshell user who recently started testing wlst there are
few features I have found lacking in wlst.
1. For monitoring purposes I am frequently using the -g and -r options to wlshell's
get command for graphing and repeating respectivelyI haven't looked at -g and -r options in wlshell, but will do so.
Although there is no graphical monitoring of attributes in wlst, but
there is certainly some monitoring capability (which will be enhanced
further in the coming version). Please take a look at the
monitorAttribute() function.
wls:/(offline)> help('monitorAttribute')
Description:
Monitors the specified attribute every by polling every interval.
Syntax:
monitorAttribute(attributeName, interval, monitorFile)
attributeName = Name of the attribue that you would like to monitor.
interval = Time (in seconds) to wait before the next fetch
monitorFile=[optional] File path where the monitored data will be
written to.
Example:
wls:/mydomain/runtime/ServerRuntimes/myserver/ExecuteQueueRuntimes/weblogic.kernel.Default>
monitorAttribute("ServicedRequestTotalCount",10)
Press Return to quit monitoring
Monitoring started for attribute ServicedRequestTotalCount
wls:/(offline)>
>
2. wlshell 2.0 adds the option when connecting to the admin server to also connect
to all managed servers in that domain. This is a nice feature for monitoring because
you then have access to all the runtime mbeans in each managed serverYes, this indeed seems to be a very nice feature. We will consider this
for our next release.
>
3. There is not a good way to pass cmd line options(variables) to wlst. In wlshell
I can send cmd line options via -v. I have tried something similar with wlst using
-loadProperties but this is a little laborious because I do not necessarily want
to create a properties file when a passing in only one or two variables. Also
I find loadProperties lacking somewhat (see 4 below)ok, I just realised that there is indeed a bug in wlst where the command
line arguments are not being honored. In Jython one can access the
command line arguments from the sys.argv variable. For example,
java weblogic.WLST -i foo.py var1 var2 var3
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> print sys.argv
['foo.py', 'var1', 'var2', 'var3']
wls:/offline>
But this isn't working properly, please keep using the loadProperties
untill this has been fixed.
>
4) loadProperties treats all created variables as strings. While this is understandable
from the perspective that getProperty returns a string, it would be nice if wlst
was smart enough that when a property is numbers only its an int, otherwise a
string etc.
wlshell does this logic/conversion for you which really simplifies calling methods
that expect the particular datatype. To get around this problem you can create a script file say,
variables.py which would look like,
# variables that will be used
theInterpreter.set('var1',10)
theInterpreter.set('var2','i am a string')
java weblogic.WLST variables.py
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/(offline)> print var1
10
wls:/(offline)> print var2
'i am a string'
>
5. I'd like to be able to send cmd output etc to a file while running within wlst.
In wlshell its a simple as adding >> filename to the end of the command. In wlst it is not as simple as doing >>, it is more than that. You can
choose any output stream to direct your output to. In your case you can
create a FileOutputStream and route the output to this stream for any
particular command.
Example,
# create a file output stream say fos
from java.io import FileOutputStream
fos = FileOutputStream("output.txt")
# save the default output stream to a variable to
# switch it back
sys.stdout=fos
# Now all output for any function will go to output.txt
ls()
cd('foo')
# after done with your functions switch it back
sys.stdout=origOutput
This is the right Jython way to do it. This works for all output streams
, very useful when you embed an interpreter in a servlet and would like
to display the output via a PrintStream etc.
>
>
All in all wlst is a nice tool. Personally if the above features were added it
would be much easier to transistion to wlst for good.
Also I really like the wlst offline tool. Its nice to be able to do the whole
create and configure domain process with one tool. Will this be supported. Yes indeed. We are working on merging both the tools into one.
I do
not want to rely on it too much if it will not work in future weblogic versions.It will be supported in future release of weblogic.
Thanks,
-satya
>
Thanks,
Darryl
"Steve Hess" <[email protected]> wrote:
Hello,
I am the BEA Product Manager behind WLST.
WLST, as it appears today on dev2dev, is an early release version of
a tool that
BEA does intend to support as part of our next major release. We decided
to issue
early versions of the tool because of the demand for a supported scripting
solution,
and to generate feedback from our user community. I encourage you to
work with
WLST, and assure you that this tool represents our current direction
in management
scripting.
Also note, this newsgroup can be used to issue questions, concerns and
feedback
about WLST. The engineering and PM team will monitor this group and
respond to
your questions as quickly as we can. While we will not be able to respond
to
every feature request, we really value your suggestions, and will endeavor
to
improve the tool in ways that meet your real-world needs.
Cheers,
Steve Hess
Director, WLS PM
"George Lupanoff" <[email protected]> wrote:
Has anyone tried using the new WebLogic Scripting Tool (WLST) that was
recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you
to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running
server.
It also has a nice scripting tool which allows you to convert a config.xml
file
into a script that can be run to recreate a domain or specific resources
within
the domain. This is exactly something I have been looking for because
we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part.
The only
issue I have run into so far is that is does not seem to understandJMS
Distributed
Destinations. When I try to convert a config.xml that contains a DDto
a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential
that
BEA will support this in the future if it catches on? Has anyone had
experience
with WLST or jython that would cause you to reccomend (or not) using
it?
Thanks.

Has anyone tried the Belkin Lego case on an iPhone 5C?

I'm wondering if anyone has tried the case. I compared my iPhone 5C to an iPhone 5 and there's was little difference between the two, but the iPhone 5 case (hard plastic case) didn't fit the iPhone 5C cause it's a tiny bit wider. I'm pretty sure that if the case is made of rubber it will fit, but I would love to confirm it before buying it.
I also tried to contact the manufacturer (Belkin) but they weren't helpful.
Any help is apreciated!
Thanks!

Mine is crashing consistently, whereas my iPad 3 hardly ever did. Mine consistently crashes within 30 seconds when I open this:
http://www.booksamillion.com/storefinder
This *****. I spent a lot of money to upgrade from a heavier pad that works to a lighter pad that doesn't.

HAS ANYONE TRIED THE BELKIN LEATHER CASE FROM THE APPLE STORE?

Hey I was wondering if anyone had tried the new Belkin case from the apple store?Most of the reviews were good but does this case have a belt clip?Does it scratch the screen?How good is it?Worth buying?
Any feedback will be greatly appreciated.

Here's what Apple recommends:
http://support.apple.com/kb/ht3226#iphones
Especially this part:
Keep liquids away from the product.

Has anyone tried the suggestion from the macfixit site

see my earlier post, "painfully slow connection".
Has anyone tried installing the combo 10.4.5 update from the mac support site.
my imac came with 10.4.4 so I assume autoupdate just installed the latest delta, but perhaps there is a problem with the installer and an incorrect library version was linked with the library. Just surmizing , but that could cause a problem.
Anyway reinstalling the update won't hurt anything I don't think anyway.

I tried it and it didn't do anything noticable. At first I downloaded the PPC version by mistake and it wouldn't accept it. A little more digging turned up the intel version. But again no change.
What I found that is working for me is setting up my router to work in "b" wireless mode instead of "g" or "b/g". It has solved the problem for now and since the speed to the router still exceeds that of my ADSL line I have noticed nothing but fast and consistent internet access.
Mike

Has anyone tried the Hong Kong Iphone bluetooth knock off listed on Ebay?

I was just wondering if anyone has tried the bluetooth knock off listed in Ebay?
It looks alot like the Apple one, I have now offically lost 2 of the Apple ones and really do not like paying $130.00 each time I loose one. I was wondering if the sound quality was close at all to Apple's.
Thanks
Whit

My brother recently bought it off ebay. He is very unhappy with it and feels like he wasted his money. He said that it been failing to connect to the internet and that the music ("ipod") part does not work well and is not even comparable to the iphone.

Has anyone tried the Zeiss Screen Eraser on their iphone 5?

Carl Zeiss company is known for fine optical gear. When I tried locally to find a flat-weave microfiber cloth for cleaning my iPhone 5, all I could find was a kit with the cloth and a Zeiss Screen Eraser, made for cleaning LCD screens and touch screens. The Zeiss Screen Eraser contains a soft sponge moistened with a solution that does not contain alcohol or ammonia. The pictures on the package show what looks like a Kindle or iPad, a Blackberry-type phone, and a laptop. So far I have resisted trying it on the oleophobic screen of My iPhone 5, using only the microfiber cloth, which by the way is high quality, which you would expect from Zeiss. I would very much love for Apple to test the Zeiss Screen Eraser and see whether it is safe to use on iPhone screens. In the meantime, has anyone in the community been brave or foolish enough to test it themselves? Thank you.

Here's what Apple recommends:
http://support.apple.com/kb/ht3226#iphones
Especially this part:
Keep liquids away from the product.

Anyone tried the new ARD Client just released today (2-1-2012)

Has anyone tried installing and running the new ARD Client released today, Feb. 1, 2012? The info provided by Apple about this update seems to be kind of thin in exactly what was changed.3.5.2, It lists only screen sharing and controlling a computer with two displays. If you have installed it what have you found as both improved or degraded. What OS do you have installed on your client systems? Any changes specific to Lion or Snow Leopard?

Today I connected to a remote server running Mac OS X Server 10.6.8 and ran the updater for Apple Remote Desktop 3.5.2.
It successfully completed and I was able to re-connect. Unfortunately I can no longer "drag and drop". When I pick up an icon, for example, I cannot release it (drop). My controlling computer is running OS X 10.7.3.
I may try to revert to the earlier version of ARD if possible. This is a pretty big problem for me; so I'm trying to figure out what is wrong with this updater. It may be that a reboot will fix the problem; but I have to wait for a convenient time to reboot my server. I need to also test connecting from a 10.6.8 workstation instead of 10.7.3, as this may be a "Lion controlling Snow Leopard" issue.
Either way, I would be wary of this updater.

Has anyone tried the Malware checker/remover by etresoft?

Was just wondering if anyone else had tried the Malware checker by etresoft?
It is posted here:
https://discussions.apple.com/docs/DOC-3271
What kind of experience did you have?
I posted this:
etresoft --
I downloaded and now have run your malware checker, and it asks me if I want to Delete or Keep a file::
Delete file 'com.apple.CSConfigDotMacCert-mynamehere(AT symbol here)me.comSharedServices.Agent.plist' that runs program '/System/Library/Frameworks/CoreServices.framework/Versions/A/Support/CSConfigD otMacCert'?
The first time I ran the checker and just chose Keep. It then asked a similar question and I chose Keep again. Then it checked programs, etc. I rebooted and ran it again, and go the same message. This time, I just did not answer and the script time ran out.
What does this mean? Do I have malware??
Should I delete the file?
How do I proceed?
At: https://discussions.apple.com/message/18069768#18069768
Has anyone else used this Malware checker/remover??
Would appreciate your input and opinion. Thank you.

linda2009 wrote:
What does this mean?
I suspect it means you have or have had a MobileMe account. I can't be sure because I've never used .mac or MobileMe.
Do I have malware??
It's very unlikely, IMHO.
Should I delete the file?
No. Do not delete it.
How do I proceed?
If that's all the script found, business as usual.

Has anyone tried the new OWC 8 GB RAM?

Anyone? They're still a little pricey for me.

I've just received the Quicken version for Lion and it crashed on four of my five files. The 5th file didnot show all the quotes. I searched the web and found that the new version is having problems with the Quote file. I tried the suggestion from Intuit. See following URL.
http://quicken.intuit.com/support/help/quicken-mac-2007-for-lion-crashes-on-lion /SLN59495.html
With the above you loss all your security quotes and need to repopulate the data file. I suggest that you try the following process on a Snow Leopard system.
To avoid a corrupt Quote file perform the following before moving to Lion. This process will give the Lion version a fresh Quote file.
1. Start Quicken with you data file
2. Open File > Export > Selected Items to QIF...
3. Check only the box for Securities
4. Quick Quicken
5. Hold down the Control key and single-click (or right-click) your data file
6. Select Show Package Contents from the pop-up menu
7. Control + click on the Quotes file, select Move to Trash
8. Start Quicken with you data file
9. Open File > Import > From QIF...
10. Quick Quicken
Now all my files run on the Lion version with all the quote values.

Anyone tried the Virtualbox OVA's in Linux OS Host?

Similar Messages

Maybe you are looking for