Anyone tryed SR-IOV on hp proliant dl360/dl380p gen9?

hello everyone
im using hp proliant dl360p Gen 8 with hp 366FLR (i350-T4 oem) and works fine (Hyper-V)
but, in case of dl360/dl380p Gen9 platform 366FLR's SR-IOV does not working.
(dl360 gen9 has hp 331i, known as intergrated nic/broadcom and i added hp 366flr-4port with FlexLOM)
the issue is...
all VM HOST/VSWITCH/GUEST settings are fine (yes. i did checked it with GEN8 and GEN9)
but GEN9's vm guest could not connect with SR-IOV.
if, i have SR-IOV disable on GEN'9's VM Config. network is working fine (but, can not use sr-iov)i have tested 3 more dl360p gen9 servers (updated firmware, bios (1.40), nic firmware, device driver, applyed spp) and same issues
and windows server 2012 r2 and windows server 2012 (r1) also...
in my opinion, this is not about configrations. hardware related problems i think.
i have contact to hp and intel, hp does not...
This topic first appeared in the Spiceworks Community

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Problem virtualising Campaq Proliant DL360 G2 & G3

Hi Guys
I have 2 Compaq Proliant DL360 G2 and 1 G3 that need to be virtualised. When I boot from the OVM Server 2.2.2 cd and run linux p2v I get a kernel panic and end of story. I assume there is some hardware it does not like, anyone have the same experience and any work round.
Thanks
Richard

Found the problem < 1GB RAM in the servers. Now where do I get memory for these old beasts from? The G2s have 4 x 128 MB so no free slots. Haven't opened the G3. Was hoping to grab some memory out of the 1 G2 and put it in the other. So now need to find 2 x 512 MB for the G2s, put them in 1 virtualise it then put it in the other. Looks like a trawl of ebay is in order, asked our normal supplier and he cannot get such old memory, or is there a way to virtualise without using the Oracle VM p2v utility and so get around the meory issues
Fun times ahead
Edited by: user7799027 on 16-May-2012 08:29

9IAS install on Compaq Proliant DL360

I have been trying to install 9IAS Release 2 (9.0.2.0.1) - on Compaq Proliant DL360 (Win200).After install EM website stops intermittently and unable to run Forms - is there a
problem with 9IAS and Proliant DL360 and is there any way round it?

Alec,
Some ideas:
1) Do you have .Net running simultaneously?
See: http://download-west.oracle.com/docs/cd/B10573_02/relnotes.902/addendum/oem.htm#1007067
2) Do you have a fixed IP address or DHCP?
See: http://download-west.oracle.com/docs/cd/B10573_02/relnotes.902/addendum/ipchange.htm#1004903
3) Did you install the infra & the middle tier in separate ORACLE_HOMEs?
Thanks,
Ashesh Parekh
Oracle9iAS Product Manager

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Has anyone tried

Post Author: Horizon57
CA Forum: General
Has anyone tried creating sections in a Crystal Report where analytic comments (or any sort of text) is fed in from a database. I am trying to build a report where users have entered comments (into an Access database) to accompany the charts and graphs on a report.
The main idea is to have these comments auto populate in the report when it is run just like the rest of the data fields.
Does anyone have experience with anything similar to this?
Mike

Post Author: V361
CA Forum: General
You can insert a section in a group (it will insert below whatever is already there), then drag the field into the report, select can grow, and see what you get.....

Has anyone tried disabling DART?

Has anyone tried disabling DART in the boot-args on an XSERVE running Tiger with 2GB RAM? Are there any effects on the PCI cards, except the obvious?
Roger

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Anyone tried different web browsers on the ipad?

HI,
I tried the ipad out today, and I couldn't get on with the safari browser. The back 'button' was in the wrong place for me as it's in the upper left corner of the screen, and I tend to hold the ipad with my left hand towards the bottom of the screen. I know it doesn't sound like a major issue, but as I'd be doing a lot of web browsing it was enough to put me off buying one, considering the price.
I've jsut found out (thanks to this forum) that there are other browsers for the ipad. Has anyone tried them, and how good are they? Is the back 'button' always in the same place, or is there one with it at the bottom of the screen?

plarkin wrote:
I just looked at the screen shots for the browsers I mentioned in the other thread. It appears that in the Atomic browser, the back/forward buttons are on a bar on the lower left portion of the screen. Perhaps someone who has the Atomic browser installed can confirm.
Thanks, just youtubed it and it is on the bottom left. Looks more like the safari on the iphone where the back/forward buttons are much better placed. I wonder why they changed this for the ipad safari?

Anyone tried SheepShaver PowerMac Emulator?

Last week I had a old FH8 file that would not open in FHMX.
FHMX kept
crashing. (Probably a font problem.) Because my PowerMac G4
will still run
Classic OS, I was able to fire up FreeHand 8 and open the
file without
difficulty.
I'm a bit worried that when I get an Intel Mac, I won't be
able to rescue
some of my old files.
Has anyone tried running older versions of FreeHand under
SheepShaver on an
Intel Mac?
http://uneasysilence.com/archive/2006/08/7352/
Judy Arndt

In article <C46C8073.2A8BA%[email protected]>,
Judy Arndt <[email protected]> wrote:
> Has anyone tried running older versions of FreeHand
under SheepShaver on an
> Intel Mac?
No.
Some time ago I asked a similar question on Adobe's ATM
forum, and while
no one had any experience with Sheep Shaver, their advice was
to just
keep an old Mac around that boots into OS 9.
ATM is required and doesn't even work too well under Classic.
But since there won't be any more versions of FH and even MX
runs well
on G4s, why upgrade at all?
Cheers Martin

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Anyone tryed SR-IOV on hp proliant dl360/dl380p gen9?

Similar Messages

Maybe you are looking for