Anyone unable to connect to bluetooth devices on iphone 4 GSM after 4.3.5 update?

After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices. Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl. When I search for anyone else having this issue I find nothing. Anybody?

cliffsnotez wrote:
After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices. Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl. When I search for anyone else having this issue I find nothing. Anybody?
I have no bluetooth problem after updating to 4.3.5. Have you tried un-pairing the devices, then pairing them as new devices? Have you tried Reset Network Settings? And have you seen this: iOS: Wi-Fi or Bluetooth settings grayed out or dim

Similar Messages

Can't connect to bluetooth device with iPhone 5 on iOS 8.1

hi
So unfortunately i can't connect my iPhone 5 (software is up to date on iOS 8.1) to my Jawbone device, It worked fine last week. and now it doesn't find it. turned my phone off and on again and it didn't change anything.
Can somebody help me?
Thanks!
Shonela

Hello Shonela,
The article linked below details a number of troubleshooting steps that can help resolve issues with Bluetooth devices.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/en-us/TS4562
Cheers,
Allen

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

Is there a way to get a log of the bluetooth devices my iphone has been connected to? My Bluetooth car speaker phone was recently stolen from my car and appears to be on Craigslist.

Is there any way to get a log of the bluetooth devices my Iphone has been connected to? I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist. I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question. Any way to get any type of bluetooth device connection log out of my iphone?

Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414

HT204387 what is the bluetooth pairing default code to connect to bluetooth device (car).

What is the bluetooth pairing code to connect to bluetooth device (car) for iphone 4 w 7.os

first you must put your iphone in the discover mode by going to bluetooth on your phone which places it in discovery mode. Them you must go to your car's bluetooth discovery mode and place it in discovery mode. If the phone sees the car and visa versa, the car will give you a code to place into your phone. Once you put the code into the phone the two will be linked. Make sure that your car has "automatic" link set so that your phone will link every time you turn on the ignition. Refer to your car's manual for more help or go to your dealer, they should be able to help you or even do it for you, but you need to know how to be able to discover and then link bluetooth devices yourself because every bluetooth device uses the same discovery formula especially if you want to use your IOS devices to play music through your system using bluetooth.

Reload Software:552 and then "Application loader was unable to connect with your device."

Hi guys
I'm new to this forum and looking for a help please..
My curve 8900 got the "Reload Software:552" message on the screen. I was trying to uninstall an application and after it asked me to reboot, it showed me that message. I already try to reinstall the OS like most of you guys said. But when I already in the process of that, it showed me "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry"
I was trying this steps..
1. use the BlackBerry Desktop Manager
2. connect the BlackBerry to the computer using a USB cable
3. click application loader, then start
4. then i choose the OS and apps i want to install it also
5. after i click finish and the process start, i stuck on the task 2 of 5 "wait for device initialization" and then the message "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry" showed.
I try and try again but there is no use. it keeps show that message.
help me please, this really frustrates me
Thanks in advance guys..

1. Make certain your USB cable is connected to a main REAR USB port on the rear of the PC, not a front USB port, not a USB hub.
2. Try loading the OS with these instructions (make sure that Desktop Manager is not running):
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi when I try to connect some bluetooth devices I get asked for my pass code for the mac air . I never had 1 is there a default code

hi
when I try to connect some bluetooth devices I get asked for my pass code for the mac air .
I never had 1 is there a default code
thanks
rob

the shaker wrote:
is there a default code
no.

HT204368 iphone5 bluetooth not connecting with bluetooth device

Hi
I am haveing problem to connect my bluetooth device with my iphone5.

Supported Bluetooth Profiles > http://support.apple.com/kb/HT3647

Bluetooth did not detect any Bluetooth device even iPhone please help me

I have iPhone 4 my Bluetooth did not detect any Bluetooth
Device even iPhone so I can not transfer any data to other iPhone
Please help me

That is correct.
This has never been a feature of iphone.
Sorry.
Bluetooth is supported for stereo headsets/speakers, telephone headsets/handsfree devices, some keyboards, some peer-to-peer apps from the apps store, tethering where provided by the carrier.
Other than these, it will not connect to another phone/device/computer/etc.

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Data transfer from External Bluetooth device to iPhone

Dear Team,
We have a requirement, Data Transfer from a SIB (CAN to Bluetooth) to iPhone.
As we know in iPhone Bluetooth is support for Audio devices.
Is there any way to achieve the data transfer from an external Bluetooth device to iPhone/iPad?
With Thanks and Regards
Chandan Prakash
Renault Nissan
Chennai, India

Ok. There are some apps where we can send and receive data like photos, contacts, etc. We can chat also. So is there any way to receive data?

After updating my macbook pro (OS X Mavericks 10.9.3) it doesn't support a connection by bluetooth with my iPhone 4S. Why?

After updating my macbook pro (OS X Mavericks 10.9.3) it doesn't support a connection by bluetooth with my iPhone 4S. Why?

Hello Sergio V. Marciano,
The articles linked below provide some useful information and troubleshooting steps that can help restore Bluetooth connectivity between your Mac and your iPhone.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Archived - Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
Cheers,
Allen

I have 8gb touch ipod (MC086C model) and i am unable to connect wifi BSNL however my iphone and laptop works well

I have 8gb touch ipod (MC086C model) and i am unable to connect wifi BSNL however my iphone and laptop works well

Well, it seems the problem I listed in my previous post (unable to wireless sync with iTunes 10.2) has resolved itself. My iPhone now syncs wirelessly. Happy for small miracles!

I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.

I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
The network is shown on the device but I can't join it.
Whats going on? Does someone know how to solve this issue?
Thank you!

Problem persisted after fixes were done so wife called apple today. Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi. My 5 and the iPads stay on with no problems. It's just the 4. So far so good...she's had wifi all day when home. It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS but !!!too late now!!! We've updated because we think our phones will run better but the ios6 just made it a pita for users
I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi??

Unable to restore iPhone 4 (GSM) after IOS 5 update attampt

Hey,
I downloaded iTunes 10.5 and then tried to update iPhone 4 (gsm) to IOS 5.
the update had failed for no clear reason and from that point on I’m trying to restore it.
for the past 20 attempts (several on my laptop and the rest on a PC), I get the same error massage:
“The iPhone “iPhone” could not be restored. An unknown error occurred (-1).”
I have not jailbroken the iPhone, i only have dozen or so apps, synced it every other day.
b.t.w
i tried the DUF mode before connecting it to the pc.
also, i tried downgrading back and restoring with the following ipsw packages: IOS 4.3.2, 4.3.4, 4.3.5 and 5.
different error code appears with each ipsw.
in the last attampt it got through the whole progress bar (so it might now be a problem with the firmware), but then it err and gave me the same massage.
what shell I do now? plz help me.

I managed to upgrade to ios5 ok but now when im trying to restore from the backup to get all my apps, photos, contacts etc back i get the same -1 error message. Really hope someone can help please!!!

Anyone unable to connect to bluetooth devices on iphone 4 GSM after 4.3.5 update?

Similar Messages

Maybe you are looking for