Anyone use CS3 with Win7 offline file syncing?

I just recently upgraded to the 64-bit version of Windows 7. It has a feature that allows you to cache network files to your hard drive for working on when you are disconnected or have a slow connection with the network (Sync Center) and can be convienient for people like me who telecommute. Most applications seem to work with this, but I've found when trying to save a file from Photoshop CS3 onto this shared drive when its in offline mode results in an error saying the file name was not valid (the file name is valid and can be saved to my harddrive normally). Likewise when I try to save a file to this shared drive in offline mode in InDesign it says that it can't save "under a new name".
Anyone else having this issue or know how to resolve it short of not using the Sync function in Windows?

I am suddenly getting that same message. "The file name is not valid" - and up until a few minutes ago, it was a valid name.
But I am using Reader X and Windows 7

Similar Messages

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

2008 R2/ Win7 Offline Files Sync causing High Load on server

Hi Everyone,
I have recently been investigating extremely high CPU Usage from the System Process on my company's main File Cluster.
We managed to track SRV2.sys Threads causing high CPU load within the system process, but was having issues identifying why this was the case.
As per Microsoft's direction via support call, we have installed the latest SRV2.sys Hotfixes, but this does not appear to have allivated the issue we are experiencing. We have also added more CPU and Memory into both nodes, which has not helped either.
We have since managed to create a system dump and is being sent to MS Support for analysis.
I have noticed the following that appears to happen on our cluster:
Whenever our CAD/Design department run certain functions within their apps running on a windows 7 client (apps include MicroStation, Revit, AutoCAD etc) we see a massive spike and flatline of the system process.
We found several users with Windows 7 clients that have Configured Offline File to sync an entire Network Volume (some volumes are 2TB Plus, so would never fit on a users computer anyway, i was quite shocked when I found this). How we spotted this was through
Resource Monitor, the System Process was trolling through all the folders and files in a given volume (it was "reading every single folder). Now, while this was the system process, we could identify the user by using the Open Files view in Server Manager's
Share and Storage Management tool.
I have done a fair bit of research and found that a lot of CAD/Drawing applications in the market have issues with using SMB2 (srv2.sys). When reviewing the products that we use, I noticed that a lot of these products actually recommended disabling SMB2
and reverting to SMB1 on File Server and/or the clients.
I have gone down the path of disabling SMB2 on all Windows 7 clients that have these CAD Applications installed to assist with lowering the load (our other options are to potentially shift the CAD Volumes off our main file cluster to further isolation these
performance issues we have been experiencing.) We will be testing this again tomorrow to confirm that the issue is resolved when mass amounts of CAD users access data on these volumes via their CAD Application.
We only noticed the issue with Offline Files today with trying to sync an ENTIRE Volume. My questions are:
Should Offline File sync's really cause this much load on a File Server?
Would the the size of the volume the sync is trying to complete create this additional load within the system process?
What is the industry considered "Best Practice" regarding Offline Files setup for Volumes which could have up to 1000+ users attached? (My personal opinion is that Offline Files should only be sync of user "Personal/Home" Folders
as they users themselves have a 1 to 1 relationship with this data.)
Is there an easier way to identify what users have Offline Files enabled and "actually being used" (from my understanding, Sync Center and Offline Files are enabled by default, but you obviously have to add the folders/drives you wish to sync)?
If I disable the ability for Offline Files on the volumes, what will the user experience be when/if they try to sync their offline files config after this has been disabled on the volume?
Hoping for some guidance regarding this setup with Offline Files.
Thanks in Advance!
Simon

Hi Everyone,
Just thought I would give an update on this.
While we're still deploying http://support.microsoft.com/kb/2733363/en-us to
the remainder of our Windows 7 SP1 fleet, according to some Network Traces and XPerf that were sent to MS Support, it looks as though the issu with the Offline Files is now resolved.
However, we are still having some issues with High CPU with the System Process in particular. Upon review of the traces, they have found a lot of ABE related traffic, leading them to believe that the issue may also be caused by ABE Access on our File Cluster.
We already have the required hotfix for ABE on 2008 R2 installed (please see
http://support.microsoft.com/kb/2732618/en-us), although we have it set to a certain value that MS believe may be too high. Our current value is set to "5", as that is the lowest level of any type of permission is set (i.e. where the lowest level of inheritance
is broken).
I think I will mark this as resolved regarding the Offline Files issue (as it did resolve the problem with the Offline Files)...
Fingers crossed we can identify the rest of the high load within the System Process!!!

Anyone use Flex with php for file upload? PHP Notice: Undefined index: Filedata

My code works. It uploads the file and inputs the file name into a database, but I can't shake this php notice. I think php is looking for multipart/form-data from the HTML form tag.
<form action="upload.php" enctype="multipart/form-data"/>
But I am using flex. The multipart/form-data info is sent as the second default argument of the upload() function. Does anyone have experience with this? Thanks.
PHP Notice: Undefined index: Filedata
$filename = $_FILES['Filedata']['name'];
public function selectHandler(event:Event):void {
                request = new URLRequest(UPLOAD_DIR);
                try {
                    fileRef.upload(request);
                    textarea1.text = "Uploading " + fileRef.name + "...";
                catch (error:Error) {
                    trace("Unable to upload file.");
                    textarea1.text += "\nUnable to upload file.";

Hi, Thanks for your reply !
Im not getting any errors Flex side, as i say i get a alert message saying the file has been uploaded so . .
I am using a Wamp server on a windows machine, how do i check the file permissions on both the folder and the php file ?
Also how do i debug a php file ?
ANy help would be thankful !

Using CS3 with Nikon Raw Files from D700 and Mountain Lion

I changed my hard disc as there was a problem. I was quite happily using mountain lion to read raw files in CS3 before re-installing and now I cannot read the raw NEFF files in Photoshop CS3. Help please.

Sounds as if that's a Photoshop problem - I have no problems with Photoshop CS6 (I upgraded from CS3 when I bought my new Mac). You might want to head over to the Adobe Photoshop discussion boards and post your problem there - http://forums.adobe.com/community/photoshop - I'm not totally sure that all CS3 apps are compatible with Mountain Lion. Roaring Apps says that Photoshop CS3 is compatible with both Lion and ML.
Have you tried using iPhoto to import the RAW NEFF files? Try that as a backup method - but get in touch with the Adobe Forum first.
Good luck,
Clinton

Working with Windows offline files

Hello,
I'm desperately trying to make Adobe bridge and other applications work faster on our company's graphics design team's computer. They work with files off a company NAS drive and loading and saving files is slow. I've enabled Windows offline files for the entire folder containing their work and synchronised it to a test computer; all their files are now also stored locally. However, they're reporting that Bridge loads even slower than before. I'm out of ideas; those files need to be available to all 3 members of our design team but I still need to make loading and working with said files faster.
Does anyone have any ideas or has anyone else tried adobe products with Windows offline files?

You can check some tools mentioned in this URL : http://www.hongkiat.com/blog/backup-and-sync-tools-for-hard-drives/
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

Offline File Sync - Temp File Issues

I just set up Offline File Sync and I've noticed that temp files (created when saving a file) are in still showing in my local folder. When I try to open one of these files, it says that it doesn't exist on the network location.
It looks like the file is being created and then removed on the network but the local cache doesn't remove the copy properly. I've tried deleting the files as well as deleting temporary files via the Sync Center but neither work.
I'd like to solve this so that the file list doesn't become crazy full with many saves from Excel files.
Can someone please help?

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Portege R500 with XP: Offline files from server do not work

I have a strange problem with a brand new R500 with XP installed. Offline files does not work: I can copy files down from servers, but when I attempt to copy back, I get an error
"Offline Files (XXX on YYY): Access to ZZZ is denied on ZZZ."
where XXX is either a samba share or a normal windows share. I have all the permissions to access those files, and can edit them if I go online without synchronising offline changes.
I would ask this on the XP group, but I've +never+ seen this on any other laptops I've used (including Toshiba). Offline files to these servers still works for me on an older laptop (running an up to date XP), using the same account details and even using the roaming profile. Its also not related to any of the standard Offline files problems that are turned up on Microsoft's Knowledge Base.
What more can I test - this problem seems specific to this laptop, and if I can't use offline files, the machine is practically useless to me (modulo paying for, and then setting up an equivalent piece of software).
Should I try uninstalling TrueSuite for example?
Anthony

I have disabled the TrueSuite File Protection and now offline files work.
This would seem to be really important limitation to the software, and I can't find any supporting documentation about TrueSuite, nor any updates for it.
Anthony

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

Has anyone used FCE with a Sony hd-fx7 camcorder

As above, has anyone used FCE with a Sony hd-fx7 camcorder. I have recently got one of these at work and am currently using imovie for basic edits, but would like to step up to FCE, has anyone any experience using the two.
THanks

Hi, have MacBookPro 2,16 GHz and Sony HDR-FX7 and FCE 3.5 (German PAL)
- works good and fast
- But better don't try to use an external monitor on DVI connection
my system slows down if srubbing time line
- couldn't find out yet why

Using ExeShield with a Director File

I developed a Director movie and need to publish it on a CD. I saw a tutorial from the ExeShield web site and it looks great and makes me able to add a serial number to it. Now I need to know if it is possible to use it with a Director file. Do I export the movie as a .exe file first? Can I also use it with a protected file? Is there another option to make a CD?

Making CDs has absolutely unequivocably nothing to do with using ExeShield to protect your published executable.
I have posted on other sites that it's quite possible to use ExeShield to protect your Director executable. It's easy to test with their trial version of ExeShield so I'd suggest doing that first to make sure that's the product you want to use before you purchase it.
For more info on burning your executable to CD, you can search the forums here....
... or try the forums at http://director-online.com/forums/ ...
... or check these other links out here:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=creating+a+fast+launch+CD&s_p ageName=http%3A%2F%2Fwww.adobe.com%2F&s_channel=Adobe+Homepages&siteSection=home

Anyone using WLST to deploy RPD file?

Anyone using WLST to deploy RPD file?
I dunt want to deploy the RPD files manually every time,so i need it automatically deploy to BI .Seems WLST can do it.Some one had tried this ?
Any help is appreciated.

http://wlst101.blogspot.in/2011/08/wlst-obiee-upload-rpd.html
I hope you are looking for this..

Has anyone used CORBA with LabVIEW?

Has anyone used CORBA with LabVIEW?

Did you have any success with this? I'm about to attempt the same thing and would rather not write intermediate functions in other other languages to do so...

D800 file compatibility: Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit? I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

Anyone use CS3 with Win7 offline file syncing?

Similar Messages

Maybe you are looking for