Anyone use Hotmail/pop3 via the nokia email client...

Iv'e set up hotmail (pop3) on my nokia 6303 via the email client but whether i set it to retrieve "headers only" or "whole email" it always downloads the whole email if message size is under 600kb ish and only the headers if email is above that size regardless of the setting. I tried setting up hotmail on a nokia 6600 and it does the same thing so i think its a hotmail or pop3 issue? I have the latest firmware installed.
I set up my gmail account (imap4) on the phone too and only downloads headers as requested.
Really frustrating as data bill too high to use the email client at moment. Anyone set up hotmail successfully on their nokia?
cheers

Just go to messaging, then email, and click on that - it will ask you for your hotmail address and password and then click ok to automatically search for settings from the internet. thats it.
Once done go to messaging, click down to message settings, then email settings. You can chosse various settings here as you like, then go to edit mail boxes at the bottom and you can edit your hotmail - here you can choose if you wnat to download just headers or the whole email. this is what didnt work for me - even if i set it up for just the header, it downloads the whole email.
let us know if it works.

Similar Messages

E71 Nokia Email client not registering other accou...

I am using nokia E71. i ran the email setup wizard, using nokia email client i have configured it for my hotmail accounty. and then from some reason i have removed it. now when i am setting up the same email id using the nokia email client its always saying " that email is already registered with another nokia messaging account". and when i goto the email.nokia.com and try login using the same email id/pwd it says id/pwd do not match neither it let me go for the option of forgot pwd, there it says that "we cant send you the temp pwd, try again later". i have been to many forums and seems like this probleme is quite common. any help would be highly appriciateable. thanks.

I had the same frustratingly slow performance issues rendering the phone almost un-usable other than voice calls. Every thing that required to go to menu and load something was just **bleep** slow.
I however resolved all issues by changing the messaging settings to use memory card for emails instead of phone memory.
Do the following and instantly your phone will come alive again.
Menu - Communications - Messaging - Mail for Exchange - Settings - Other - Memory in Use - Memory Card
Do the same for other mail accounts.
MAGIC !!!

Has anyone done any work with the "Form" Email Feature in 2008?

Has anyone done any work with the "Form" Email Feature in 2008?
2006.7
Oracle 9i
Websphere 5.11
IE6 & IE7
I have been testing the version 2008.2 and noticed the "Form" link in the email templates, has anyone used this or know what its for?
It seems like a useful feature, but I can not find any documentation on its use.
Thank you
Daniel

Hi Daniel,
The HTML widget we have incorporated into the application is an open source tool. It's name is FCKeditor. Here is the URL for the documentation site: http://docs.fckeditor.net/
- Ed

Has anyone used SFTP/ssh via any process in OWB?

Has anyone used SFTP/ssh via any process in OWB?
We need to SFTP a file from an SFTP server(unix) to our OWB environement.

You can use the FTP operator in a process flow. Configure it as such -
Command - /usr/bin/sftp
Parameter_List - ?${Remote.User}@${Remote.Host}?
Script -
lcd ${Working.RootPath}
cd ${Remote.RootPath}
get myfile
bye
You have to configure the operator to define remote and working locations.
There is another example for this in the documentation -
http://www.oracle.com/technology/products/warehouse/casestudies/10gr2/ftpprocessflow/ftp_linux_to_winxp.html
I personally prefer scp to sftp as in my experience OWB handles errors better with it.

Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player? This probably cannot be a demo app in that the amout of photos on the slideshows is large.
Thank you,
Jim

Export the slideshow from iPhoto, that makes a movie of it.
Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
Other options:
Burn: http://macupdate.com/app/mac/21992/burn
Toast: http://macupdate.com/app/mac/6351/toast-titanium
But there are lots of others too. Search on the App Store or MacUpdate

Nokia email client and yahoo small business proble...

Hi All,
I have been using nokia email client for more than a year and it was working perfectly fine until some days ago.
I updated my email client with latest build and now it is not fetching/pusing email for yahoo small business email address. I have tried all option but with no luck.
Important point to notice that it is pushing all email from simple yahoo account.
Anyone else having same kind of issue. Any help will be appreciated.
Thanks

I have the same problem! It used to work on my macbook for over a year then it just stopped. Not sure what did it...

Problem regarding the standard email client in Nok...

Hi,
I have tried for days to set up the standardphone email client with my email adress. I use my own email account from a domain. (.net)
When i bought the N8 last month it actually worked with the standard imap configure and ports used in outlook and other devices.
Suddenly i got the message that i had to reinst. the email-account on the phone, and now its not possible to recive emails.
I have tried almost everything, but managed to send emails after i deleted every mail account on the phone, and denied the terms at the end so my emails dont go through the nokia.com system.
Have anyone experienced the same problem?
Does anyone have a solution?
Henrik (Norway)

Hi G. ,
good to know your WebDynpro reacts to eventing sent by MDM Result Set iView. As you mentioned, the problem is getting the record-id from the sender ResultSet iView.
Here is the info:
Step1: display what comes from sender iView.
e.g. for NW04 EP SP14: Logon to Portal with admin access, then navigate to System Administration -> Support -> Client Framework -> SPOCKI, Client Framework Inspector. Enter the pcd link to the MDM Result Set iView, then all client framework info is visible including all parameters of eventing. If the parameter you are looking for (e.g. record-ID) is not sent out from ResultSet, then:
Step2: configure MDM ResultSet iView to send the record-id
Content Administration -> ... select your Result Set iView -> open it in Edit mode -> select Custom Events -> select event type EPCF -> select Mapped Field [Record ID] -> enter the name of the parameter (same specified in event receiver). Then repeat the Step1 to make sure the record-ID is really sent out from Result Set iView.
Thank you in advance.
Regards.
Laszlo.

How to create MAC JNI call to launch the native email client

How to write JNI code to call native default email client on MAC OSX and add attachment in that email client. Thanks plz help in this regard.

Which suggests that you want to open the actual email client, rather than using java itself to send the email.
However it doesn't answer why.
At any rate that requires the following.
1. A platform specific way to run the email client. If you can't figure out how to do this from the command line (nothing to do with java) then you can't do it in java.
2. A way to manipulate an application that is running. The Robot package is intended for that. It might or might not do it. If not then you would need to find or create something else to do this.
3. Custom scripts for each possible email client which is fed into part 2 to make it do something.
Obviously a lot of work especially the last as that part might vary not only by vendor by also by version and user configuration.

What is the best email client for ipad 2

what is the best email client for ipad 2

Im going to go ahead and assume your talking to me?
    I ended up in this thread in search of a functional Exchange ready mail client capable of supporting multiple mail profiles. Since there are no free applications to accomplish this in the app stor, which I can find, I figured I'd leverage the 'community' for some direction before throwing good money after bad.
   As I assume Im not the only one to do this, I figured I'd help straighten these folks out on the lingo (as they werne't applying it properly) and the sassy 'sound like apple users' comment references the way ANTI-apple folks assume you people are less than adequite users.
   If I called an apple an orange, you would say I was wrong. If I did it repeatedly, after correction, you would assume Im incompetant.
   Seriously, its a stupid machine and will only do what you tell it. (true for all computers, apple or otherwise)
   So if I ask for a mail client, dont give me a provider. If I ask for a service, dont name a client.
    Your right, this post is old. And stilll doesnt have an answer. . .
    In response to MichelPM, I didnt call your baby ugly. The 'Bandwagoning' is cute though. My advice is sound, and helping you folks not to look so... well... stupid.
    Since you interceded though, how about a little help? What mail client do you use? Is it exchange Compatible, with active sync? Does it offer multi-profile support? And the clients want images in their signatures, and multi signature support. (I can do this with my android phone )
Im looking forward to your responses.

Why is Firefox 3.6.10 crashing repeatedly when I am using hotmail to try to send emails?

I am only having difficulty with hotmail when using Firefox 3.6.10. Opening hotmail is OK, and so is reading emails. The problem starts ONLY when I try to SEND a new email, or reply to an existing email. The email composition page within hotmail opens up, but then my hard drive begins to act erratic and spins non-stop. Then, a few seconds later, it crashes altogether. I restore the session, and all my windows open up normally, but another crash is inevitable because that 'send email' hotmail window is open. Presto... another immediate crash. So, obviously, I can restore a 2nd time, this time WITHOUT restoring the hotmail window, and everything seems to work fine. I have to open up a new tab for hotmail, and that appears to work fine for seeing what new is in my inbox, and even as far as reading emails. It seems to only crash when I try to SEND emails.
I had to go through about 20 different crashes before I could isolate the hotmail window as the culprit. They ALL have the same signature: coreclr.dll@0xbae82 . Of course, "Search Mozilla Support for Help" turns up absolutely nothing on the signature.
The Crash IDs are numerous. I've only listed a few of them, in the link to the right.

Hi
coreclr.dll is an MS Silverlight dll.
Try de-installing silverlight & re-install Firefox
I seemed to have an older version of silverlight already on my computer, but that wouldn't uninstall.
My solution that worked for me is to use the Windows install cleanup utility: http://support.microsoft.com/kb/290301.
Select Silverlight from the list, and then download Silverlight again and reinstall.
And, if all else fails:
http://www.microsoft.com/getsilverlight/get-started/install/uninstall.aspx.

I want to set up two apple id's (w/facetime) one for personal use, and one for professional use.   I get the validation email, click the link -and it says it won't work for security/timeout reasons.   failure prevents setup of second account.

I can set up my personal account just fine. personal apple id is my [email protected] - I can setup the ipad and face time no problem.
But I don't want to be facetime tutoring with my personal account. I want students to find me by my .edu address
I cannot complete the second apple Id setup, as the confirmation email always fails. Even if I disable all firewall/blocking in outlook and windows.
I get an error every time.
Your request couldn't be completed.
This may have occurred for security reasons or because your session timed out.
So much for Apple being the "simpler" PC for users.
I've been a Windows user/technician for many years.   I've never seen anything this aggravating.
Anyone run into this before?

Saw this in another forum. You could try it.
Under the FaceTime Account you can only have 1 email set up, but below that you can set up multiple email accounts as phone numbers, I do it all the time.
FaceTime is set up with my account, but since the iPad is more of a family device (its mine, but everyone is allowed to use it), my sister programed her email so that her friends can call her on the iPad and so did my Mom and brother. Their friends dial their numbers (email addresses) and the iPad still rings even though the main number is mine account.
 Cheers, Tom

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Is there a way to force href="mailto: to use the default email client

I would like to use the href="mailto:" in my website to automatically open an email but the end user gets the message "There is no email program associated to perform the requested action..."
Is there a way to force to the mailto to use the and user's default email client?
Thank you for your help

Hi James -
That is the default behavior of browsers when handling the mailto link.
Please keep in mind that nearly half of website visitors do not have an email client as they are using mobile devices or public computers or web-based email like Gmail, MSN mail etc.
Please don't feed the spambots. Best practice is to use an HTML "form" in conjunction with a server-side forms processing script. Ask your hosting provider if they provide one for you.

Unable to use HTML tags in the BPEL email component

Hi,
I am using BPEL email component to send mail notifications. I want the email should be in proper format.If I use HTML tags the workflow application build fails .It says invalid syntax for html tags.So, I removed the tags and just using the concat string operations as of now.To format i even tried '\n' like in java but it didnt help. Could you please let me know how do I achieve this?
The JDeveloper version is 11.1.1.3 and SOA ,OIM both are 11.1.1.3
The BPEL source code for the email content I configured is:
<copy>
<from expression="concat(string('AD Account access request has been rejected by manager.\n
Here are some details about the request:\n
Request ID : '), bpws:getVariableData('inputVariable','payload','/ns3:process/ns4:RequestID'),string('\n'),
string('Employee First Name : '),bpws:getVariableData('empFName'),string('\n'),
string('Employee Last Name : '),bpws:getVariableData('empLName'),string('\n'),
string('Manager Employee ID : '),bpws:getVariableData('manager'),string('\n\n\n'),string('Thanks,\n IDM Administration')
)"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns15:Content/ns15:ContentBody"/>
</copy>
Please suggest .
Thanks,
Piyasa

Hi
Here is the sameple email from BEPL email component. See if this helps:
"<html>
<body>
This is an automated message from the Identity Provisioning Solution. Please don’t reply to this email.

An access request has been successfully submitted for <%concat(bpws:getVariableData('inputVariable','payload','/ns3:process/ns4:BeneficiaryDetails/ns4:FirstName'),' ',bpws:getVariableData('inputVariable','payload','/ns3:process/ns4:BeneficiaryDetails/ns4:LastName'))%> to access <%bpws:getVariableData('inputVariable','payload','/ns3:process/ns4:ObjectDetails/ns4:name')%>.

To view additional details of the request, login to the Identity Provisioning Solution.

 Request ID: <%bpws:getVariableData('inputVariable','payload','/ns3:process/ns4:RequestID')%>
 
 
 
 Thank you,
 Identity and Access Management
</body>
</html>
"
Regards
user12841694

Has anyone used or heard of the DMT tool?

Has anyone on here used or heard of the DMT tool? if so? does it work?
Kind Regards, Bert

Yes it does work. There are various versions of it and they only work with certain routers. Cannot remember the site its on . I think its the kitz site
{edit} here is the site:
http://www.kitz.co.uk/index.htm
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Anyone use Hotmail/pop3 via the nokia email client...

Similar Messages

Maybe you are looking for