Anyone use MSI LiveUpdate2 to update MSI GFX card bios?

I using MSI GF4 Ti4200 64MB.
My BIOS version is 4.25.00.29.10
Anyone has newer bios than me?
Izzit safe to use the LU2 to update my gfx bios?
MSI GF4 cards have dual bios right?

looking for problems ? do you need that update ?
or you want to do it cuz may be someone has newer ?

Similar Messages

MSI 7770 Compatibility Issue??? Bios Issue???

Hello
I recently got a 7770 to replace my factory 420
My computer is a DELL XPS 8300
Computer doesnt post with the 7770
Replaced my PSU and installed a 600w but still nothing
7770 works, tested on another PC
I got some info from DELL forum. Something to do with the UEFI
Copy from their forum "support sent me a non-uefi bios to flash the video card with. After I updated the video card bios on another PC, I installed it in my XPS 8300 and the system booted succesfully. So far everything looks good for me"
Non UEFI bios means GOP BIOS?
I already flashed my card with that. https://forum-en.msi.com/index.php?topic=170948.0
I would appreciate some info for my problem. Dont know what to do and to be honest im a bit confused
THX

Em, no what was suggested in their forum was the other way round. The person tried a NON-Gop (legacy-) vbios. If a UEFI board isn't GOP compliant what your Dell computer's UEFI then seems to be it won't post with a vga that uses a GOP compliant vbios. To fix that the card is flashed with a legacy vbios. As you have no clue if your card previously had a GOP vbios or not I can't tell if the GOP is the issue. At least the vbios you flashed is GOP compliant and would therefor surely not help if the described above is your issue.
Add a copy of your first vbios.

X-Fi + 2 GFX-Cards = high CPU-Load, slow Mouse, hanging system

>X-Fi + 2 GFX-Cards = high CPU-Load, slow Mouse, hanging systemA Hey guys,
I'm running 2 GF 8800 GTs (PCIe .) cards on a MSI Eclipse SLI board. My Audigy2 ZS PCI runned fine in this system.
I just replaced the Audigy by a PCIe X-Fi (EMU20K2 audio processor - not the xtreme audio from MSI).
Now I'm dealing with the following issue:
- System startup is slow
- in Windows, Mouse is slow, stuttering
- high CPU-Load
- very slow system response
!!! Attention !!! I had this problems allready at the st boot with the X-Fi, when the driver from creative wasn't installed (the card was recognized as "HD Audio" bei Windows 7). Installing the drivers didn't help.
If I install only one graphics card, the system runns fine and I can use the X-Fi and it's Software without problems.
If I replace the X-Fi by the PCIe Xtreme Audio from MSI, System runns fine.
If I use Win XP with the two GFX cards and the X-Fi, System runns fine.
Can you help me?
Regards from snowy Germany
User....

Hi there,
got the same problem if i use my two Nvidia GTX260.
My system:
Asus P6T
I7 920 @ 3,8GHz
2GB ram
Gigabyte GTX260 OC Edition
Nvidia GTX260
X-Fi XtremeGamer
-System (Win7x64) takes ~0min to start.
-Stuttering mouse, keyboard everything >.<
Deactivating the onboard sound doesnt help.
Newest Nvidia and Creative driver too =(
The system runs fine without the X-FI and two GTX260 no errors ect...
One GTX260 runs also fine with the X-FI
But two graphic cards and the X-FI..... **bleep** =/
I use debian as my main OS and it run still fine with both graphic cards and the x-fi...
so i think its just a driver problem.
Hope it will be fixed soon =/
If someone have any sugestions...please help us.
Greetings from Germany also =D
Syro

Update Graphics Card BIOS

I have N580GTX-M2D15D5/OC. I want to Update the Graphics Card BIOS ,I visited the MSI website and found this BIOS file NV801MS.KG4, Tell me how to update the vga card bios with this file because there is no update utility or rom file with this download?

Quote
Today I turned on the computer and noticed colored lines appeared during booting windows and then error showed and system restarted
That is no vbios issue but most likely a hardware defect. If you already tried a different bios you have the verfication it is no bios issue. A vbios doesn't just die all of a sudden. It causes issues from the start or is working.
Try the card in another machine and if problem presists rma it if still covered by warranty.

[Athlon64] RS480M2-IL + GFX CARDS ?

Hi i have recently bought a x-qpack and put a rs480m2 in it but i was wondering which gfx card i can get for this motherboard, because ive been reading the forums and some people have had some problems with all sorts of gfx cards, so is there anyone out there who knows a good gfx card that runs good with this mobo.
p.s i want to use the pc for gaming

Quote from: 1ck on 09-September-05, 02:50:55
whats your HDD problems ??
It's strange, good SDRs but very slow seek times here is the problem discussed a little deeper.

Anyone using asus silent knight II on msi DKA 790GX platinum?

hihi..
anyone using asus silent knight II on msi DKA 790GX platinum?
anyway to orient the air flow to horizontal setting. cos right now my cpu cooler was shooting up warm air to my power supply.
thanks

Quote from: nel_hawk on 22-May-09, 08:23:49
Oh I see.. now then know that it's ATX standard. thanks.
then how about the rear fan, is it functioning the same as PSU fan?
or is the rear fan's function is to suck out the whole system's warm air?
It's to help getting hot air out, but that is added by case builders.
Here you have the original specs: http://www.formfactors.org/developer%5Cspecs%5Catx2_2.pdf
Case builders added extra fans because ATX standards aren't good enough for high-end systems.
However, ATX is designed to let the PSU suck out the hotair...
Anything you add to it makes it all cooler and doesn't hurt.
You should know that AMD CPU's do not get very hot at all, it's the Intels that do, especial the Pentium4, so case builders created all sorts of solutions to cool them down as ATX wasn't sufficient for the P4.
Even Intel made a new spec BTX, but that wasn't accepted by builders.

Anyone use a Pinnacle PCTV Stereo on a MSI PT880 ?

I need to know if anyone use a Pinnacle PCTV Stereo card on a MSI PT880 motherboard. As i cant get it to work on mine, i have to know if anyone else has succed this operation. Or maybe this tv-card isnt compatible with this mobo ?
I have tried the tv-card on 2 other computers, and it work great.
I can explain the problem here too (even if its in another thread too):
If i put the card into a pci slot the d-bracket show 4 leds. If i assign a IRQ for the pci slot in bios to 11 it seems to boot, but i cant have my intel pro/100 pci nic inserted at the same time, then it show 4 red lights again.
But if i just have the tv-card inserted and assign IRQ 11 and boot windows and install all drivers and software for the card, everything seems to work .. except that it cant find any channels.
And if i shut the pc down for an hour, and start it again. It again show the 4 red leds .. even as i havent changed any setting in the bios.
I got nuts on this one .. but im sure want my tv-card to work .. so i can check mtv when im doing other things.
If someone can help .. im being very happy.

Quote
Originally posted by Del UK
Hi Yabba,
Will try and borrow card and see what happens......... please allow 24-96 hours, before I test this.........
Del
I will be very happy if you can try same card as i have. . so i know if its the tv-card or the mobo that have the error .. hehe.
Take your time m8 .. and thanks.

Anyone using HDTV Component Video on an MSI 6600GT?

I am building a system for somone and want to use a 6600GT because of the component video output. I have a 6600GT already but I have no HDTV to test the component output. Has anyone used the component output on a HDTV, and how well did it work?
Thanks

Basically the product and its drivers are junk.
I tried it in another computer and the picture was clean , until the whole thing locks up after 3 seconds.
Did the fixes they said might work, ng.
Good luck to anyone using this crap.

Cannot update graphics card BIOS, MSI Live upate 6 will not work.

Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
Live update 6 does not run.
Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
No UI.
No Error message.
If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
As a result I cannot update to latest BIOS for my graphics card.
Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
CPU: AMD A8-6600k APU @ 4.60GHz
RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
Motherboard: Asrock FM2A88M Extreme4+
GPU: MSI Radeon R9 280x Gaming 6G
GPU details:
Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
once we have those 2 pieces of information someone here will be able to get one if Available for your card

Problems with MSI Web Live updater and Downloadable updater

First off im new and second im sorry if this is the wrong spot.
Ok i did a reinstall of windows Xp updated with Microsoft's updater all the way up to SP2. In the past i had no problems at all with the MSI Updater. Now i have problems :( Please read below.
Hi i would like to know if anyone else has this problem;
I try to use the Web Browser version of the MSI Updater,well while its trying to scan it will say "Error" "service not started" about 4 or 5 times.
When i use the Downloadable version of the MSI Updater it crashes when its scanning and my computer will reboot till i go into safe mode and uninstall it.
Im going to be getting this Motherboard soon http://www.newegg.com/Product/Product.aspx?Item=N82E16813130136 I'm not sure if i want to if the MSI updater will no longer work. I have always depended on the Updater for my drivers cause i'm not the most tech savvy person in the world plus its very convenient to have all the drivers in one spot.
if this updater continues to not work im not sure where i can get the drivers. I dont want to get the wrong drivers and by mistake kill my board cause i flashed my board with the wrong drivers. if its not fixed i may not get anymore MSI boards :(
So does MSI realize that they killed there updater? i mean it worked fine in the past but now its a piece of junk :(
Please help.
P.S. Im not trying to be mean or flame im just frusterated :(

1st we are talking about drivers here... not BIOS.
You shall not update your BIOS without very good reason, read here ==> https://forum-en.msi.com/index.php?topic=103441.0
"i have MS-6712 those BIOS updates don't work and even at the bottom of them it says "this bios can not be used with MS-6712"
Yes because there are several mainboard MS-6712.
"This BIOS cannot be used on KT4V (MS-6712) & KT3V (MS-6712)"
That's correct your mainboard is KT4AV {also MS-6712, but use different BIOS. That's why is that warning notice.}
"So now that we know those BIOS updates don't work are you still sure those are the right updates for my board? Please make 100% sure."
Yes they are correct if you really have KT4AV.
Leave BIOS alone.
If you want to update your BIOS and need help with BIOS update, read here 1st ===> https://forum-en.msi.com/index.php?topic=113146.0
and provide information about current BIOS version onboard. You may have an OEM mainboard.

MSI GE620DX Driver Updates

Hi MSI community.
I purchased my first ever MSI product today, a MSI GE620DX laptop. And I'm very proud
Now, which drivers is needed to upgrade to get this machine as fit as possible to date?
I've been readig about BIOS updates thats very important and GPU drivers aswell.
As is turns out now, the software "SpeedFan" is telling me(while only running Internet Browser) that the CPU runs at 60C,Core 0/1 at 67C. But the laptop itself doesnt feel that hot. I need to upgrade some drivers but I'm very unsure about which ones and how.
Hope anyone can give me a short feedback or maybe some links to guide me properly and safe.
Greetings
PineappleThief

I had the same problems with the temps, and they are correct. I've tried alot of apps to check the temp, and they are all showing the same. Those high temps also gave me huge fps drops while playing.
What I did to solve this:
I turned off Intel SpeedStep in BIOS. Just set it to Disable instead of Enable.
The only problem with this function off, is that the TurboBoost function dosent seem to work. So you might loose some performance, but nothing ive noticed so far.
This made my laptop 10-12C cooler, and my GPU never goes above 80 while playing.
I'm atm playing SWTOR, some hours/day and I've not noticed any fps drops or extreme high temps.
Yours,
Blix

MSI 745 Ultra multiple gfx cards

I have an MSI 745 Ultra , BIOS v1.4 and two gfx cards. One PCI and one AGP. On boot the AGP cards is initialized and used. Is there a way to initialize the PCI card first ?
Other motherboards have a BIOS option to select between a PCI or AGP card to be initialized first, but my BIOS has no such option ( or at least I could not find it ).
regards,
stein
I have an MSI 745 Ultra, Athlon 900 ( 100 MHz FSB ) and 256 PC266 DDR memory module ( the chips are made by MOSEL (http://www.moselvitelic.com), chip type is V58C2128804SAT7 ).
BIOS is v1.4 ( v1.5 has the same problem )
The memory only runs at 200 MHz.
If I try to set it at 266 MHz ( CPU:MEM ratio 3:4 , FSB is 100 MHz ) then the computer keeps on rebooting, not even the VGA BIOS screen is visible. The only way back is clearing the CMOS with the jumper. ( not even holding "Insert" works. Is that supported at all ? On my older MB , MSI K7T Pro2A holding "Insert" on bootup, would use default BIOS settings, but still leave the CMOS intact, so you could switch back certain settings if the prevent from booting )
Any suggestions ?
I tried BIOS v1.3 and there it works !
regards,
stein
I have an MSI 745 Ultra.
Power-on by keyboard does not work.
help.
the keyboard is Cherry G-83 ( PS/2 )
I tried BIOS v1.3 , 1.4 and 1.5.
regards,
stein
>

Yes, but now the subject is a lot less descriptive.
With the original post, forum users could see what my problem is just by looking at the message list.
Now only those who open my message can see what problems I have. By this I lost a lot of potential helpers.
I personally would probably not open a message with such unspecific title as "MSI 745 Ultra problems"
I'll try to change the subject ...
regards,
stein

HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

Maps: Turn-by-Turn Navigation
Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
Back to Top

Why isn't there an updated MSI for version 17.0.0.134?

Why isn't there an updated MSI for version 17.0.0.134? I am licensed to distribute in my enterprise.

Hi Michael,
The updated MSI installers are now available on the licensing page. There is a lengthy thread on this at Flash 17 .msi's not available?.
Maria

I can use this videocard in a MSI 970a-g46MOBO

HI
I can use this videocard in a MSI 970a-g46MOBO
PNY VCGGTX7803XPB-CC-OC GeForce GTX 780 3GB 384-Bit GDDR5 PCI Express 3.0 x16 SLI Support Video Card XLR8 Enthusiast Edition
Thanks

1: what BIOS version do you have on your motherboard?
2: what Power Supply do you have?

Anyone use MSI LiveUpdate2 to update MSI GFX card bios?

Similar Messages

Maybe you are looking for