Anyone use the Line6 KB37 with Logic?

I've been planning to get a new interface and was going to go with the Apogee Duet, but then discovered the Line6 KB37. Can anyone here that has it comment on it? How are the mic pres? Is it pretty stable? How is the latency? Feedback appreciated. Thanks....

hi..i've advocated the KB37 many times on this forum, you get a lot of bang for your bucks, the best aspect is that there is ZERO LATENCY!!, that's right, absolutely ZERO, so you can set logics buffer to max and it wont matter, this is because the KB does all the monitoring. The mic pre's however are very average, but for what you pay that's no surprise. You can hear some of my work on www.steveshadforth.com ,all logic and KB37. Good luck with whatever choice you make, keep coming back to the forum!! Steve

Similar Messages

Anyone using Tascam DM-3200 with Logic

Anyone using the Tascam DM-3200 with Logic? Sure seems like an easy solution combination of converters and DAW control, plus onboard effects.

Hey Joseph,
I have this combination. I like it so far. I'm not really a "mixer" person but I am resolute in learning how to use this thing in depth!
Anyways, as far as controlling Logic, I got it working pretty easily. It seems that the faders don't seem as "sensitive" as my Logic Control (I think I mean resolution, perhaps?). I also have not played with the Tascam enough to know what other features are mapped out besides just level faders. It is very easy to switch between a fader layer and the Mackie control layer: just one button press. One thing though is if I have logic set to auto-sync in, and play, it will receive some timecode from somewhere and then stop after 2 bars. Don't know why this is, and it means I'll have to disable the Tascam's midi if I want to sync Logic to, say, Protools.
I connect my old 828 via Adat to Tascam and it sounds so much better than the Analog ins to the Tascam, so I'm happy about that. I have also the 8 Analog input card so I have a total of 24 Analog Ins which is nice too.
If you have any specific questions, I'll try to asnwer them, but so far, i like the combination a lot. My one complaint - they put the Control Room volume way up at the top of the mixer. My keyboard (Roland XV88) protrudes a bit from the front of the mixer, so i can see myself getting back spasms if I reach that volume control a lot!! I guess I'm shorter than the average user! Anyways, the mixer sounds good enogh to my ears.
Cheers
Ken
PS The manuals for the mixer are at Tascam's website. You can also take a peek at them to get a sense how things are setup.

Is anyone using a Digi 003 with Logic? What is latency like? Thoughts?

Hey EVeryone
I am looking at a Digi 003 interface for running Logic... we are keen to use an automated desk, instead of the Yamaha n12 currently in use...
The n12 has been BRILLIANT in terms of low-latency monitoring - we usually run it at a buffer of 32 samples and for most scenarios, even with a fair few effects running, that works really well for direct monitoring through Logic.
I'm interested to know what experiences people have had with the Digi 003 in terms of latency...
Another thing I love about the n12 is that I can just monitor straight through it, when I don't need to run any effects in real-time on the channel I'm recording. This is a simple thing that's really handy.
Is there any such option for running a channel straight through the 003 at zero-latency, if required?
Any other feedback, beyond the issue of latency, would also be welcomed!
Cheers,
Mike

Hi Mike
I have a 003R, I loath it. I have had to have it sent back for repair many times to Digidesign. I bought it to retain compatibility with ProTools incase clients brought PT sessions in. Well, since I bought it, I have had zero requests to use PT. It has issues with latency, frequently changing from one recording to another and not recognizing the buffer settings within Logic. The latency issues were the same within PT too, even switching from 44.1 to higher settings like 48Khz made it have latency. I have had enough so I am selling it and switching back to an all Apogee system.
Mattrix is right, shop around, there are way better systems for less money out there. Only get one if you absolutely need ProTools compatibility.
Sincerely
Bobbi
ps Another frequent problem is it "drops" from the system and you have to reboot it to use it again...

Has anyone used the NAG libraries with LabVIEW?

I try to get the "g08cgc" (chi-square calculation) running, but LabVIEW hangs up everytime I start the VI..
Some tipps ... ?

Here is the code (wirtten with LV7.1)
Let me say that I'm a newbie using statistical functions and calculations.....
For the calculation of Chi-square I have the followind input variables:
- measured values
- calculated values
- coefficients
If you/someone can give me some tips how to calculate chi-square with this input variables it would be very helpfull (e.g. maybe MS-Excel can do this,too ?! Using .NET etc?)
Thanks in advance!
Message Edited by _avr_ on 01-19-2009 01:43 AM
Attachments:
NAG_g08cgc.vi ‏38 KB

Using the MPK Mini with Logic Pro

Hi, I got an MPK Mini with Logic Pro.
At first it was working fine but I left it for a couple of weeks but now when I plug it in, Logic doesn't recognise it anymore.
I've read this http://documentation.apple.com/en/logicpro/controlsurfacessupport/index.html#cha pter=1%26section=1 but I still haven't been able to get it working.
Has anyone got any ideas?

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Has anyone used the MXL iBooster with GarageBand?

I am trying to find a good, cheap, interface to record acoutic guitar music while using GarageBand. Any suggestions? Is the MXL iBooster any good?

Never used the iBooster probably works fine but for a few dollars more you could get a digital interface. A digital interface would be much more useful allowing for more audio in and out options and wet or dry monitoring.

Using the Toneport UX8 with Logic Pro 8

I got used to using my toneport in Live 7 and now I've got Logic Pro 8 and I can't seem to figure it out. I connected my Roland Fantom X6 to my toneport and then connected my toneport to my puter and Logic recognized the toneport right away and asked me if I wanted to use it. I clicked yes, it changed my core audio settings and I double checked them. I can't hear anything. I had programmed a drum beat prior to attempting to record my keyboard pieces. Why can't I hear anything? and What kind of a track do I need to create to record my keyboard?
Thanx =)

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Anyone using reason 4.0 with logic?

im using reason 4.0 abby road samples and im getting latency when i try to record tracks. i have a 2.0 processor and 2 gigs of ram. any advice?

I had that problem B4. I was getting huge latency in my mic when trying to do vocals and couldn't figure out why for the life of me. Then EVEN THO I WAS TOLD BY EVERYONE THAT PLUGINS ARE NO LONGER USING CPU WHEN BYPASSED, I did have the PSP Vintage on my Master but IT WAS BYBASSED! after I removed it completely, no more latency! So Maybe one of your hefty plugins is the culprit??

Anyone using the magic trackpad with iPhoto 11 in fullscreen mode?

I love fullscreen mode in the new release of iPhoto. Does the magic trackpad make it more iPad/phone like?

To answer you question, no. I have the trackpad and it does NOT make the experience any different than it is on a laptop. There is NOT any iPad like gestures that are included in the Photo App on the iPad. I thought there would be some but unfortunately there are not magic things LIKE the iPad

Is anyone using the novation impulse keyboard with Logic pro x?

is anyone using the novation impulse keyboard with Logic pro x?
I currently have an M-Audio Axium controller but I cannot map any of the controllers.
I need to buy a 25 key controller anyway so I was hoping to get one that works well with Logic Pro X

I have the Logitech S530 keyboard and mouse. I had no problems with it while I was using it with 2 PowerMac G5 and one Dell XPS, but when I got the MacPro I found that it doesn't work with MacPro and a KVM switch. Logitech says their keyboard and mice are NOT made to work with KVM switches, but I didn't find that until I started using it with the Mac Pro.
The other small con is that the mouse is made for right handed people. On the other hand, I love the looks and feel of the keyboard and all the keys. It also will do the boot up holding down the Option key for choosing your startup drive and holding down the Shift key for Safe Mode, which the Kensington keyboard will not do.
MacPro 2.66 ghz., Macbook Pro, Macbook, Powerbook G4, PowerMac G5 Dual Core Mac OS X (10.4.8)

Has anyone figured a way to use the Magic Trackpad with Windows 7 on a partitioned disc using Bootcamp?

Has anyone figured a way to use the magic trackpad with Windows 7 on a partitioned disc using Bootcamp?

Yes. After Windows/Bootcamp discovers your bluetooth device (Magic Trackpad or Mouse, be sure to make it discoverable), right click, with your wired mouse, of course, on the icon and select Properties.
Then check the mouse drivers box and your device should work. (I located this solution on another thread)
It works for both the Magic Mouse and Magic Trackpad.
Must admit, the solution was not intuitive within the Windows environment. But we all must remember. It IS Windows, after all.
Another thing. Keep in mind that the gestures on these devices that work just dandy in OSX do not carry over into Windows.
It's Windows.

Can anyone tell me the how to use the "ducking" process in Logic Pro 8?

Howdy,
I've tried following the directions in the manual but I just can figure out the steps necessary to use the ducking process in Logic 8. For those who aren't sure what ducking is it's for instance, when you want a guitar track's volume to be reduced when a vocal track is active. As an example, there is a way to trigger the volume reduction in the guitar track(s) using a compressor in the vocal track. Whenever the singer is singing it automatically reduces the volume in the guitar track. I'm just not sure how to do this. Any help with the steps involved would be greatly appreciated.
Thanks,
Mark

Well, the theory is you run say, the mix , through the 'ducker' or as I like to call it, the 'motherducker', then you simply sidechain say, a kick drum. That is to say, you route your kick to a bus or aux channel, preferably routed to a different output, then assign that bus or aux as your sidechain input in the ducker. The theory is that the through signal will duck on receipt of the sidechained kick.
Frustratingly, this ducker is the buggiest thing since a bug landed on a buggy while loading it into the back of a VW bug. It just doesn't work. well it works for a bit and then stops working. Or the kick comes through the ducker as well. Or some other manifestation of complete crapness. Come on Apple, sort it out - it's the sound that everybody wants!
Sorry Mark L1

Has anyone gone to Europe from US and used the IPAD charger with only a plug adadpter and had no problems?

Has anyone gone to Europe from the US and used the IPAD charger with only a plug adapter? I want to be sure I won't burn up my IPAD.

Just using an adapter will be fine. The charger can handle to 220V just as well as the 110V

Has anyone used the Nokia 2700 as a modem with the Macbook 10.6.7

I have managed to sync my Nokia 2700 classic GSM handset to my Macbook through iSync. How can I use the phone as a modem if I have a 3G mobile service?
Many thanks in advance,
Dileep

louisfromleonia wrote:
Has anyone used the macbook air superdrive connected to a macbook pro - with a source DVD,via usb as a destination drive for burning DVDs?
I don't use the Apple SuperDrive but an LG GP08NU6W. works great! You can get one here:
http://www.amazon.com/LG-Electronics-GP08NU6W-External-Drive/dp/B003D1DESS
I got the white one.

I just had my logic board replaced. now im having trouble using the interent even with a strong connection and the internet is working on other devices!! please help me :(

I just had my logic board replaced. i am now having trouble with using the interent even with a strong connection. all other devices are having no problem with the internet. please help

Test while started in Recovery : if the problem persists, then it likely is a hardware issue.
Resetting the System Management Controller (SMC) probably won't change anything, but you can readily do it before contacting the repairers.

Anyone use the Line6 KB37 with Logic?

Similar Messages

Maybe you are looking for