Anyone used Airport Express to use hotel wired connection for iphone wifi?

I'm thinking of getting a Airport Express to take overseas. It appears a lot of hotels offer free wired internet access but charge for wireless.
Anyone done this?

Yes. You connect Airport Express to the hotel room's ethernet connection. You have the Airport Express distribute IP addresses (NAT). You can then connect computers and devices to your Airport's wireless network.
Some hotels don't have wireless but charge for wired. Using an Airport Express in this manner allows you to connect more that one device for the one charge.

Similar Messages

Can an airport express support wireless and wired connection at the same time

im wondering if i can use wireless and wired connection at the same time

The Ethernet port that the old AirPort Express has got is to connect the AirPort Express to your modem, not to connect another PC or Mac, so you can only connect wireless devices to the AirPort Express.
If you have the new AirPort Express, you can connect a wired PC or Mac and more wireless devices or computers at the same tiem

Can't find Airport Express via wireless or wired connection.

I've run across this topic in this forum and a lot of others and nothing I've found has helped resolve the issue. It seems like the one definitive answer I found was to return it to the store, but I'm hoping to avoid that so I figured I'd try once more.
Running Windows XP and using a linksys Wireless-G network card. When I first got the Airport Express I was able to connect to it but then I had some issues with my cable network connection and had to reset everything. Since then I haven't been able to connect to it, and currently I can't find it using the Base Station. Tried resetting it to factory defaults about 10x and I'm still stuck on blinking yellow. I tried connecting it directly with a network cable and even then my computer can't seem to find it.
I tried turning off my firewall, reinstalling the Airport Utility, connecting to the IP address 10.0.1.1 using the "Configure Other..." box and no luck.
Any suggestions?
Thanks much.

The issue is within the network configuration of the Airport Express. As you mentioned, all hardwired devices can use AirPlay but all wireless devices can't.
Normally, the Airport Express will wirelessly join your existing network, and Airplay will work with all devices. Any reason why you have your Airport Express connected to your router via ethernet?

This isn't a question but rather a warning to anyone using the new OS for iphone 4. The imessage uses up your data plan like crazy. I called Apple about it and they said no it's not doing it. I called AT

The new OS is burning through my data plan like crazy and here's why. Imessage uses your data plan and not your texting plan. So every time you send a text message to someone with an iphone it uses imessage and it uses your data, not your text plan. I couldn't figure out why I was burning through so much of my data plan so quickly. I called Apple and they said, no it's not the data plan doing it. I called AT&T and they said, yes, the imessage uses data instead of your texting plan if you are texting to another iphone. Also, the new OS runs your apps all the time, even when you aren't using them. So if you are not near wifi your apps are running and burning your data plan. The AT&T guy took me through the steps to turn off the apps. You can still use them but they won't be running constantly. Seriously Apple, you should let people know this. It does say it in the fine print on the website "data rates may apply" under imessage but most people will never read this. So my data plan started on October 10th and it's already at 175 megabytes and I only have a 200 megabyte plan. I've never used more than 50 to 75 megabytes in a month. Apple get it together and be honest with people and tell them. Quit denying the problem. Most people have probably not even discovered this yet. Wait till you get your bill.

kimmie92592 wrote:
It's not really common knowledge because I've talked to several people today and none of them knew about it. Also, when I called Apple they said no the new OS is not using data. Totally wrong answer. You'd think they'd know about it and at least tell people. The people who are going to be hit by this are people like me with the 200mb plans. I just think it's best to spread the word so people can know what's happening. I still don't know how I went through so much data in such a short period of time. It's not happening anymore though, not since I fixed everything up last night.
If you are using a free wifi connection, there are no data charges with iMessage. But in an area where you did NOT have a wifi connection, of course it used 3G and of course you got charged for it (or had it count against your plan limits).
I'll ask again - without a wifi connection, just what did you think was happening? How did you think your iPhone was able to magically send a message WITHOUT using any data connection? A little bit of rational thought would have made you realize that there was no way, over a 3G connection (which is a service provided by your cellular service provider, NOT Apple), that you can send or receive ANYTHING without your service provider's plan picking it up.
Nothing abut iMessage has ever hinted that it can, in any way, bypass your service provider when NOT using a wifi connection.

Trying to use Airport Express (2012) in Hotel and it is not working

Hey folks, the title pretty much says it all. I picked up a new AE last week, and wanted to use while I travel to share out my hotels wired connection to my computers, iPhone and iPad. I am pretty good with networking, so I can't seem to figure out how to get around the double NAT error that I am getting from the Airport utility. It appears that the hotels network is blocking me from connecting. If I use my back up travel router (Zuni Connect) everything works fine. It appears the AE is not getting along with the hotel. Any ideas on how to get around this?

I traveled for years with an AirPort Express and have had virtually no problems connecting to the hotel networks if an Ethernet port is provided in the room.
Up until a few years ago, configuring the Express in Bridge Mode worked just fine, as hotels would allow several devices to connect without problems.
Unfortunately, hotels have become a lot smarter as they look for ways to generate more revenue. Many hotels now will only allow one connection if the Express is configured in Bridge Mode, so I started using the Express in router mode about 3 years ago to get around this.
Security wise, this is actually a bettter arrangement as Tesserax notes, because other users at the hotel cannot "see" your devices.
The Double NAT "error" can be ignored with an option in AirPort Utility if you wish, and the Express will display a nice, green light.
I have no trouble connecting 3-4 devices this way and the hotel only "sees" one device, so they only charge for one connection.
When the hotel only has wireless, that is when I bring out the second Express that I travel with, so I can use one Express to "join" the hotel network and provide an Ethernet signal to the second Express, which is configured as a router to allow multiple devices to connect. The hotel only "sees" one connection this way.

Can i use an airport express as both a bridge and for airtunes?

I have an Airport Extreme Base Station (5th gen) and an Airport Express. The Airport Express is currently set up only for Airtunes. I would like to use it to extend my existing wifi signal to the backyard. Do I have to use the Airport Express EITHER for Airtunes OR as a bridge, or can I do both simultaneously?

The AirPort Express can be configured for the following uses simultaneously: extend a wireless network, AirTunes, and printing. Here I am assuming that you will be using a wireless connection between the AirPort Extreme and AirPort Express.
Hopefully, your AirPort Express is the newer "n" wireless version, because this will provide the best network performance, and it is also easy to configure as well.
As to whether you will have adequate signal strength in the back yard, that is difficult to predict in advance. A lot will depend on the distance that the Express is located from the AirPort Extreme, how many walls and obstructions are in the signal path, and how much of the backyard area that you intend to cover.

Can i use my european airport express in israel as a client for streaming music?

can i use my european airport express in israel as a client for streaming music?
thank you!

Yes. There may be regional differences in the number of available wireless channels but it should work. Its power supply is universal.

Can i use my airport express to get wi fi access for my samsung mobile?

can i use my airport express to get wi fi access for my samsung mobile..if yes, how?

If your Samsung mobile phone is Wi-Fi ready, you can use the AirPort Express or any other wireless router or wireless access point to provide a Wi-Fi network for it to connect to.

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?

I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

How do I set up an Airport Express as a hard wired wifi accesspoint?

How do I set up an Airport Express as a hard wired wifi accesspoint?

Please check out the following Apple Support article for configuring your routers for a "Roaming" network. In this case the AirPort Express would be connected back to your other wireless router by Ethernet and configured as a bridge. This would effectively make the Express perform as a Wireless Access Point.

After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

Has anyone used ROXIO TOAST II for burning DVD

Has anyone used ROXIO TOAST II for setting up intro and burning to DVD. I used to do this in IDVD which has been abandoned in the Maverick

Just to say that that I've tested iDVD on 10.9 and it works for me. It's a discontinued program of course, and hasn't been supported for several years, but I don't think it runs any differently on 10.9 than it did on say, 10.6.
However…can't help you with Toast because I don't use it.
Russ

Can I turn off the wireless and use the wired connections at the same time?

Can I turn off the wireless and use the wired connections at the same time?
This is to avoid transmission when I work without the need for wireless

Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

TS1589 I have to reboot my BTinfinity router to enable me to link my ipod to Airport express. When it is connected it works perfectly, but it is getting a bind to have to keep switching the router power off. Any one help???

I have to reboot my BTinfinity router to enable me to link my ipod or my iphone to Airport express. When it is connected it works perfectly, I use it to play music through my BOSE soundwave, but it is getting a bind to have to keep switching the router power off. Any one help???
Ipod touch: 4th generation Upto date software
Airport Express: Latest model
Iphone 5: Upto date software

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

Anyone used Airport Express to use hotel wired connection for iphone wifi?

Similar Messages

Maybe you are looking for