Anyone used free CASE tools?

hi guys,
I was just wondering which CASE tools someone here has used and was good to use, basically I must be able to save the diagram as a picture so that I can copy and paste it to Word document, if someone has done something similar, please let me know what too you used, and only free ones please, I know a lotof you probably used advanced case tools that probably cost a lot of money but I dont work for a company and just need a free one only, thanks.
AU

im going to use UMLet. Seems simple and not
overcomplicated. Anyone used it before?Yes.
is it good?
|                                                                              |
|                  Please, nobody answer this question.                        |
|                                                                              |
|    The individual posting it has, for months, done nothing but brag, lie,    |
|       threaten, insult, and otherwise sow discontent at these forums.        |
|                                                                              |
| When people give him help despite his past bad behavior, he is unwilling or  |
| unable to use it as intended, and instead merely whines to have his answers  |
|                   handed to him on a silver platter.                         |
|                                                                              |
| He spends one minute sucking up, making nice when he needs help, and then    |
| when he gets bored or frustrated, lashes out with more childish rantings.    |
|                                                                              |
|                   He deserves no help whatsoever.                            |
|                                                                              |
------------------------------------------------------------------------------

Similar Messages

  • I am using Illustrator CS6 (Mac). I am using free transform tool. Why can't I use Shift Option Command to distort in perspective?

    I am using Illustrator CS6 (Mac). I am using free transform tool. Why can't I use Shift Option Command to distort in perspective?

    hong,
    You need to ClickDrag just a tiny bit, then apply the Shift Option Command.

  • Why the Text disappears when I rotate it using Free Transform Tool?

    Hi,
    My Text is visible before rotating it to verticle position using Free Transform Tool. But when once it is rotated to verticle position the text disappears from the Stage. And it is not an animated Text as well? What is the problem?
    Thanks.

    If the textfield is manually placed on the stage, you should be able to select the textfield and click the button for Embedding that is in the Properties panel.

  • Photoshop crashes when using Free Transform Tool

    Hello All Forum Members,
    Recently Photoshop CS6 crashes when I attempt to use the Free Transform Tool through the shortcut (Ctrl+T).
    It also crashes very often when using any of the free transform/transform tools via the menu as well, though not as often as the previous listed situation.
    This experience only occurred recently - for all the time I have been using CS6, this has never happened.
    I have read another thread similar to this, though I don't think the cause of the problem is the same as this was only a recent experience.
    Any help will be appreciated.
    Many thanks in advance.
    Jinky145

    Hi Curt Y,
    Thank you for the quick reply!
    By immediately, do you mean when the loading or when the actual interface has finished loading?
    I have tried both, but neither seems to have worked.
    Is there a menu or someplace else I can reset preferences?
    Many thanks!!!
    JInky145

  • Anyone using Java Portlet Tools?

    Is anyone using the Java Portlet Tools to develop portlets?
    You can read about it here:
    http://dev2dev.bea.com/pub/a/2006/05/java-portlet-tools.html
    I was told by BEA that this is unsupported but I don't think thats going to be a problem.
    If you are not using this then how do you build portlets in java without resorting to scriptlet code?

    Thanks for the reply Chris.
    It looks like the portlet tools does 3 things:
    1 - filters content like the DotNet WCC http module to make existing apps behave when run inside the portal
    2 - drops a bean in the request automatically for you so that you can access portlet functionality on the jsp with JSTL and no scriptlet code
    3 - gives you some custom tags to read and write session prefs and publish and subscribe to events without javascript
    Items 2 and 3 are very desirable to me for new portlet development.
    So who is using this toolkit and are you using it with JSF or Struts or just straight JSP?

  • RE: CASE Tools

    We use Paradigm Plus & it seems to do a pretty good job. There are a few
    problems with their round trip engineering piece(Forte to Paradigm &
    Paradigm to Forte), but for the most part it works well. We are
    scheduled to get the latest release(4.0 I think) in a week or so &
    hopefully that will be fixed. It does have some quirks, but we've found
    work arounds for most everything. I don't think you will find a CASE
    tool or any software for that matter, that does everything you want &
    doesn't have any quirks.
    From: Duncan Kinnear[SMTP:[email protected]]
    Sent: Tuesday, February 10, 1998 11:31 PM
    To: [email protected]
    Subject: CASE Tools
    We are about to embark on a major conversion and remodelling of our
    existing one and a half million line Cobol system, into a Forte
    system.
    We would like to use a CASE tool to help us design things, but we need
    one
    that is reasonably closely linked with Forte so that changes in TOOL
    can
    be easily integrated back into the design.
    Are we dreaming here, or has anyone found a decent CASE tool that
    achieves
    this? Do people use CASE tools at all? Are they used purely as a way
    of
    creating the class attributes and method stubs? Or do people use them
    post-development to document what they've done?
    We have looked at SELECT, which seems pretty good, but it's still a
    bit of
    fiddling to control the flow of information between it and Forte.
    I'd be interested in any comments.
    Cheers,
    Duncan Kinnear,
    McCarthy and Associates, Email:
    [email protected]
    PO Box 794, McLean Towers, Phone: +64 6 834 3360
    Shakespeare Road, Napier, New Zealand. Fax: +64 6
    834 3369
    Providing Integrated Software to the Meat Processing Industry for over
    10 years
    If you are not the intended recipient, please notify the Sender.
    Non-business opinions may not reflect opinions of Piper Jaffray
    Companies (PJC). Distribution or other use of this information
    is prohibited without written consent from the author.
    PJC reserves the right to monitor all e-mail.
    ------------------------------------------------------------------------------

    Paul Monax wrote:
    The previous company I was with we started out using SELECT because at
    the time,
    1.5 years ago, it was the only CASE tool that generated Forte code.
    Actually, is not accurate. Even during my Forte beta days (1993) we were using a
    forte generator from the Pardigm Plus folks (we, felt like we were helping debug the
    product back then).
    When Ration
    Rose came out with a version that included Forte code generation, about
    6 months
    later, we looked at it and eventually switched to Rose, mostly due to
    performance
    issues with SELECT.
    Both products required some tinkering to get Forte code generated, but
    Rose has more options. Reverse engineering existing code into the CASE
    tools is also about the same for both products. Neither one has a
    complete round trip feature that we could ever get to work without
    blowing away code that had been written.
    Paul
    Duncan Kinnear wrote:
    We are about to embark on a major conversion and remodelling of our
    existing one and a half million line Cobol system, into a Forte system.
    We would like to use a CASE tool to help us design things, but we need one
    that is reasonably closely linked with Forte so that changes in TOOL can
    be easily integrated back into the design.
    Are we dreaming here, or has anyone found a decent CASE tool that achieves
    this? Do people use CASE tools at all? Are they used purely as a way of
    creating the class attributes and method stubs? Or do people use them
    post-development to document what they've done?
    We have looked at SELECT, which seems pretty good, but it's still a bit of
    fiddling to control the flow of information between it and Forte.
    I'd be interested in any comments.
    Cheers,
    Duncan Kinnear,
    McCarthy and Associates, Email: [email protected]
    PO Box 794, McLean Towers, Phone: +64 6 834 3360
    Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
    Providing Integrated Software to the Meat Processing Industry for over 10 years

  • CASE Tools

    We are about to embark on a major conversion and remodelling of our
    existing one and a half million line Cobol system, into a Forte system.
    We would like to use a CASE tool to help us design things, but we need one
    that is reasonably closely linked with Forte so that changes in TOOL can
    be easily integrated back into the design.
    Are we dreaming here, or has anyone found a decent CASE tool that achieves
    this? Do people use CASE tools at all? Are they used purely as a way of
    creating the class attributes and method stubs? Or do people use them
    post-development to document what they've done?
    We have looked at SELECT, which seems pretty good, but it's still a bit of
    fiddling to control the flow of information between it and Forte.
    I'd be interested in any comments.
    Cheers,
    Duncan Kinnear,
    McCarthy and Associates, Email: [email protected]
    PO Box 794, McLean Towers, Phone: +64 6 834 3360
    Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
    Providing Integrated Software to the Meat Processing Industry for over 10 years

    Do you mean a decompiler? There's jode, which I think is at sourceforge.
    Do reverse engineering tools really come under the CASE rubric?

  • Free Transform tools

    Using free transform tool, it used to be that you can hold down the Shift key while dragging the corner to resize your image/object.
    This shortcut no longer gives you a proportional scaling unless you have to click on the Lock in the tool menu.
    However, when it comes to scaling type boxes, it works perfectly fine.

    @R_Kelly: I am using Ps CC 2014. This happened with my previous version as well.
    @normfb I don't mean by the lock layers. What I meant is that when you do scaling using Cmd+T and then hold down Shift to scale the object, usually in previous versions of Ps, that would give you proportionate scaling. However, this no longer works in my last 2 versions of Ps. This has been something that bother me a lot as I am a long time user of keyboard shortcuts. If I have to move my pen/mouse for something I can do with a keyboard, would mean I am wasting my time.

  • Free Ttansform Tool

    Hello,
    I am trying to use the Free Transform tool from the tool box.
    Here's what I do...
    write some text
    create outlines
    selsct the text, use free transform tool by clicking and hold ctrl
    1 out of 10 it works.
    If i select a shape tool from the tool box it works everytime.
    Doesn't matter if i make a compound shape from the text, but if I release the compound shape and select one of the letters from the text it works.
    What is going on?

    I don't have AI 13 (CS3), but in AI 12 (CS2) it is
    normal behavior for
    nothing to happen when you grab a free transform corner control handle and click-ctrl-drag. Side handles, however, give you x+y free transformation when you click-ctrl-drag.
    The normal corner grab (without the Ctrl modifier) should work fine.
    This behavior is the same in AI 8, 10 and 12. It is the same with point or area text objects.
    To do what I think you want to do, you have to convert the text to outlines.
    Otherwise, if you want to keep the text live, try Effect | Distort & Transform | Free Distort. (Menu items and effect might be different in AI 13.)

  • Upgraded to 8.0.2 on 5. Lost all photos in camera roll and photo stream.  I used a recovery tool that shows the photos are still in there 'somewhere' but they want $70 to recover them.  Any free methods? I shouldn't have to pay for Apple's screw up!

    Also, I did a backup on iTunes before the upgrade but after the upgrade completed, it performed a backup that overwrote the last one I did.  At least I think it did, there is only one backup showing up in the MobileSync-Backup folder on my computer.  Also, in iTunes on the bottom of the screen, the bar that shows how much storage space is being used by what, its number of pics is several hundred more than the number of pics on my phone.  The ones it didn't erase were in a different album that I had uploaded from my computer (ironic that the pics that I didn't lose in the upgrade, I already have copies of on my computer). Anyhow, I used a trial version of recovery program called Wondershare Dr.Fone for ios, and while I'm definately not here to promote them, after it did the scan on my iphone, it showed thumbnails of all the missing photos, along with everything else I'd ever done on my phone lol. So I do know they are in there, I just can't afford to pay $70 to retrieve them, nor do I think I should have to as the upgrade caused them to be missing!  Does anyone know of a free recovery tool? I never used iCloud, so that is not an option either.

    Also, I did a backup on iTunes before the upgrade but after the upgrade completed, it performed a backup that overwrote the last one I did.  At least I think it did, there is only one backup showing up in the MobileSync-Backup folder on my computer.  Also, in iTunes on the bottom of the screen, the bar that shows how much storage space is being used by what, its number of pics is several hundred more than the number of pics on my phone.  The ones it didn't erase were in a different album that I had uploaded from my computer (ironic that the pics that I didn't lose in the upgrade, I already have copies of on my computer). Anyhow, I used a trial version of recovery program called Wondershare Dr.Fone for ios, and while I'm definately not here to promote them, after it did the scan on my iphone, it showed thumbnails of all the missing photos, along with everything else I'd ever done on my phone lol. So I do know they are in there, I just can't afford to pay $70 to retrieve them, nor do I think I should have to as the upgrade caused them to be missing!  Does anyone know of a free recovery tool? I never used iCloud, so that is not an option either.

  • Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could

    Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing  it but I have lost my serial number.  I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks

    Ianp69549740 have you tried reinstalling Photoshop CS5.1?  If so do you receive any specific errors?  What operating system are you using?

  • Can anyone explain why my surface pro 3 will not accurately use the brush tool in adobe illustrator?

    My surface Pro 3 is amazing with photoshop but it cuts in and out using the brush tool in illustrator.  Does anyone know of a fix?

    Hi Dinar Fresco,
    We have seen some issue with n-trig win tab drivers on surface pro 3. Here is a forum post with some solution https://forums.adobe.com/thread/1649008?q=surface%20pro
    Sanjay.

  • Every time I try to use the "crop" tool, Aperture crashes. Anyone else have that problem?

    Every time I try to use the "crop" tool, Aperture crashes. Anyone else have that problem?

    It's an old installation, 2.1.4. I'm running OS 10.9
    That is the problem. Aperture 2 is not fully compatible with MacOS X 10.9; the crop-tool, the Loupe, some brushes no longer work reliably in the newer MacOS X version. And I really doubt, that there will be bug-fixes for Aperture 2 on Mavericks. These incompatibilities started with MacOS X Lion, and have gotten worse with each new operating system release.
    To run Aperture with Mavericks you will need to update to Aperture 3.5. for full compatibility.
    Do you also have older plug-ins installed, that might be incompatible with Mavericks? Check with the developer's website, if there are updates for any plug-ins.

  • When I use the type tool or the selection tools, my photos blink between the photo and a black screen.  Anyone else have this issue?

    When I use the type tool or the selection tools, my photos blink between the photo and a black screen.  Anyone else have this issue?

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?

  • I wanna get a UML Case Tools, where can i find one for free or opensource?

    Hi, Merry X.Mas!!!
    I wanna get a UML Case Tools, where can i find one for free or opensource?
    Merry X.Mas!!!

    Hi,
    There is one more tool by name Enterprise Architect which supports UML2.0. A 30days eval copy is available. You can try hands on it.

Maybe you are looking for

  • Help with opening Adobe Reader and downloading updates

    I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files). When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the

  • Customised Flavor Drag and Drop in Indesign CS3

    Hello All, I'm implementing a to Drag & Drop from an external application (say windows Desktop) on to Indesign CS3 Document. I have implemented a Custom Flavor helper and a Data Exchange helper for my custom Flavor. I have registered my Custom Flavor

  • How Do I combine 2 InDesign Documents into 1 (in a very particular way)

    How do I combine two InDesign Documents into one in a very specific way. Here's my problem: I have two separate InDesign CS5 files for playing cards. File one is the front. File two is the back. The company that does my final print production needs t

  • To Launch Workflow Notifications repeatedly

    Hi All, We have created a new workflow process and are trying to launch it for specific task types in Service Requests. The notifications are getting kicked off for the first time. But, when I want to launch the workflow again for the same task it's

  • Creating an open document/hyperlink

    Hello...I am trying to create an Open Document hyperlink on my report.  I am currently using Crystal Reports XI.  My main report is getting sent out in PDF and is a summary version of our inventory items.  I want the user to be able to click on the I