Anyone used Mocha for FCP with Motion4?

I'm considering this tool.
http://www.imagineersystems.com/products/mochafor_FinalCut/
Only downside is it only runs in FCP, so you have to send the tracking data to Motion from FCP.
But, curious if anyone is actually using it, and how well the workflow works with Motion4?

Les,
If you're going the Mocha route, just buy the stand alone version of Mocha, you will not regret it. You'll also get the Mocha shape plug-ins for AE and FCP.
Before the Mocha for FCP plug was created, I exported Mocha tracking data to Shake or AE and then used specialcase's [Tracker Data plugs|http://www.motionsmarts.com/downloads.html] to get into Motion. While I was only able to get single point tracking into Motion through this backdoor, it still worked fairly well.
But I would advise just to get the Mocha application if you're even considering the tool at all.

Similar Messages

Has anyone used Aperture 2.0 with 8800GT?

Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

Hi Don
I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
Hope this helps
John Blake

Have anyone used IDOCs for FB01 posting ?

Have anyone used IDOCs for FB01 posting with posting keys ? If so please help me with the code.
I am using posting keys 15 for the first line item to Customer account(Credit) and posting keys 40 for the second line item (Debit)

DID you find in which User exit you are going to Code? Then we can ref old posts.
then you will get the code. not same belongs to FB01, for othre
Regards,
anjireddi

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Hi 4judy,
If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Regards,
- Brenden

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.

Anyone using PDDocExportUserProperties for exporting PDF to XML

Hi,
Anyone using PDDocExportUserProperties for exporting PDF to XML. I am using Adobe PDFL 9.0 to do the same. However, do not find any sample programs or tutorials.
Please anyone have any samples, do provide.
-Abhi

> PDDocExportUserProperties
Where did you find this method? It's not listed in the PDFL API Reference for 8.1 or 9.

Has anyone used Verizon Fios Services with Windows 7 ?

Has anyone used Verizon Fios Services with Windows 7 ?

Yes Beta And RC. It works the same as Vista, with probably some enhancements. Didn't have any issues, but I did not try wireless.

Anyone using Brother HL-2170W with their Mac?

Anyone using Brother HL-2170W with their Mac? I read some reviews at newegg and they are not bad , but at the apple store the reviews are not that good at all. Is this because it is not working well with Leopard as most printers don't or what?

Verizon informs me that Windows is only needed to download and install some form of authentication and that the free wi-fi hotspot service can be used from then on from the Macintosh side. Even though it's a Windows program, I'm assured that the authorized status will be detected when the Mac laptop is used under OS X

Can I use Keynote for Ipad with my PC?

Can I use Keynote for Ipad with my PC?

Unfortunately, this is not true either. For some reason, when you export to PDF, and open the PDF on a PC, it often says it cannot read the font and you get a PDF that looks like it's very sick.
I'm not sure exactly how PDF works, but I don't know why it needs to be able to read a font correctly? I thought PDFs were readable on anything because it basically printed the document on a page, which is why you cannot edit it.

Can I use iMessage for free with someone in a different country?

Can I use iMessage for free with someone in a different country?

Suzanne515 wrote:
dj,
That is good to know. Have you ever turned off wi-fi and used your cellular data instead? I'd like to know if your carrier charges you for the iMessage? I will be travelling with a +44 number on my sim card (Teletial based in the Channel Islands I believe) and some places like South Korea & Japan charge about $30USD/MB. ( or 19 GBP/MB). The devil is in the detail.
My carrier, 3, does not charge extra for cellular data. I pay £34 per month for a cellular plan with unlimited data. So, no, I do not get charged for sending iMessages whether I am on cellular data or wifi. If I were to try to send an iMessage to an international number that did not belong to an Apple device, it would send as SMS and I am sure that standard international rates would apply. Apple iMessage is a different protocol for users with an AppleID. There is no way for the carrier to distinguish it from any other data traffic.

Can I use Safari for G3 (with OS 9.2)

I wanted to know - can I use Safari for G3 (with OS 9.2)
If, yes.....where can I download....
if somebody can help me....pls email to...
[email protected]
thanks

Hi
Welcome to Apple Discussions
Adding to Klaus' comment, have a look at this article for browser options for OS 9.2.

Anyone using a 4K monitor with FCP X?

Is anyone using FCP X on a 4K monitor? I'm thinking about getting a Dell 4K monitor as my main monitor but I'm a little worried the user interface support on 4K is weak. I think everything is going to look super tiny.
Has anyone already experienced this?
Thanks!

So I have my new Mac Pro set up. 8-Core, 32 gigs RAM, Dual 700 GPUs, 512 gig internal Flash drive.
I purchased the 27" Thunderbolt display as my main Final Cut Pro X screen and I have the Dell UP2414q 4K monitor plugged in as the Viewer display.
I have the Dell set to "Best for Display" and it works fine. I have some 4480 x 1920 RED footage and I have the FCP X Viewers on the Dell. The footage is set to 100% and it bleeds a little off the sides, as it should since the monitor is 3820 wide. It's at its native resolution.
The user interface elements of the second monitor are at normal size - the menu bar, the FCP X view options. Buying a 4K monitor and using Best for Display gives you the desktop the size of a typical 1080 monitor, but it all looks like a Retina display. It's very crisp.
So if you want a second monitor to hold a ton of Adobe palettes, and have a very large desktop, I'd recommend getting a Thunderbolt display, beause this display behaves like a 1080 monitor in that regard. If you want a 4K monitor specifically for color grading 4K footage at the native size so you can see all the artifacts and things you wouldn't see with the footage at 50%, this Dell monitor is fine and it's $890 on Amazon. It's not a professional color grader's monitor, obviously, but it does well for me.
I took some 4480 x 1920 RED footage that had a sky that was gray (the famous Mercedes in the mountains footage). I used the color picker color correction in FCP X and was able to select that sky very easily. I can see why the fat 4K footage is so great in regards to color grading. Because you don't have the massive color gradiation and artifacts you get in the more compressed media, when you use the color picker, it selects a very large, clean, section of the sky. I was able to quickly make the sky more saturated and blue and play it in real time (Better Performance) it's it's perfectly clean with no halos around the tree branches as they move into the foreground of the sky. Very nice!
Nice feature in FCP X is all the effects, transitions, etc., have a "4K-ready content only" button at the top so it only presents you with effects and transitions that work with 4K footage.
It took a lot of time calibrating this Dell monitor. It has the Adobe RGC color space built in but when I set it to that and set the OS X Display color option to Adobe RGB, it all had a very slight purple/pink huge. Very slight. Whites were not pure white like they are on the Thunderbolt and my blue sky had a tinge of pink to it.
I calibrated it with advanced options in the OS X Display preferences. I then connected my Samsung HD LED TV into the HDMI port of the Mac Pro and set it as my A/V display in FCP X. I was able to do the custom color setting on the Dell monitor itself and lower the saturation and RGB values. It took about 15 minutes to get it looking right. Now, I don't see the very slight purple/pink tink. My blue sky looks blue, etc., and it looks exactly how it will look on DVD and Blu-ray and projectors at film festivals.
The Samsung LED TV was a breeze to use. As soon as I plugged it into the HDMI port of the Mac Pro, the displays changed and OS X went to 1920 x 1080 60hz. The color was set to an HD color preset (I forget the number and I disconnected it). Arranging the multiple monitors is as you'd expect, just works.
BTW, I have 2 10 TB 5Big Lacie Thunderbolt 2 hard drives. They are about $1K each at 10 TBs. I have one for my footage and one as a backup with Time Machine. No formatting necessary - just plug them in and go. I plugged in the first one, told OS X no for Time Machine. Plugged in the second one, told Time Machine yes. Renamed the second drive "Backup". I turned off hard drive sleep becuase it's annoying. You hear it spin up, spin down, spin up, etc. as you work.
I used the AJA benchmark and this is what I got with 16 gig test file, 4K video simulation:
Write 740.3 MB/s
Read: 849.1 MB/s
Fast!
FCP X loads in 4 seconds on this system off the internal Flash drive.
Cheers!

Question for Anyone Using CS4 Production Premium with Windows 7

I'm testing Windows 7 at home with CS3 Production Premium and have not had any issues. Of course CS4 is quite a bit different.
Anyone using CS4 Production Premium on Windows 7 regularly? Any issues to report?
Thanks

Thanks for replying to my post:
mark_m wrote:
"I notice that when I open an old CS4 project and PPro asks you to locate the file, that the "show only exact file name" tick box seems to have no effect.
This is on Windows 7 RC 64bit."
On our systems at work that have XP and Vista + CS4 Production Premium. I've noticed this with preview files in particular and possibly some others, I don't remember. The "show only exact file" checkbox is greyed out. This is somewhat annoying because projects can have a huge number of preview files with long cryptic names making it a pain to locate the correct one manually to get the ball rolling. If I don't think it'll take too long to re-render, I just select "skip preview files".
We bought 3 licenses for Windows 7 and I'm encouraged by the performance, reliability and features on my home test system (RC 64) that has CS3 installed. Can't wait to get rid of XP and Vista.

Anyone using Blackmagic Intensity Pro with Premiere CS4

I've looked through the threads and have seen similar postings, but no real good answers. Is anyone using Blackmagic Intensity Pro to viiew timeline on a HDTV using the HDMI connector?
I purchasedf the Intensity Pro and can't get it to work with CS4. Any assistance would be appreciated.

If you're using a Core i7 processor, one of the problems might be with the motherboard. There's only one Intel board that BM has approved (sorry, don't have the model in front of me -- on a piece of scratch paper in my wife's car).
I'm looking to build a new system myself and have been looking at the Intensity Pro card as well. The main feature I'm looking for is real-time preview and program output to an HD monitor that I'd hook up via HDMI. I probably also would use it to capture analog sources for audio and video. I don't have any interest in BM's lossless data capture as it creates monster-sized files. That's why I was also planning to add Cineform once it's fully approved and working for CS4. However, as best as I can tell, the Intensity Pro card doesn't recognize the Cineform codec on the timeline. Does anyone know if and how well these two will function together within Premiere? (I'm also assuming that the new 4.1 release might make these types of Premiere add-ons work better.)
Thanks.

Has anyone used a MacBook Air with a TV as a monitor?

Wondering if anyone can advise on experience with using a tv as a monitor? I don't believe Mac make just a monitor for this purpose do they?

it's ok, highly pixelated, meaning you will see pixels. I would say its great to watch videos, but any reading or such will be displeasing. Really depends on the pixels per inch of your TV also. But, I would stick with nothing more than 27" for reading or anything text based.

Anyone used Mocha for FCP with Motion4?

Similar Messages

Maybe you are looking for