Anyone using a Mac Mini and LE8-Is it powerful enough?
I'm looking at buying a 2.0GHz Mini and LE8. I have a monitor and an external 500 GB FireWire hard drive. Just wondering if anyone is using a similar set-up to do large recording projects on. Is it powerful enough to have 20 to 30 audio tracks in a song?
Any input would be greatly appreciated. TIA
R
Yes.
I run a 2Mhz mini(or possibly 1,86MhZ) 2GbRam mini and LE 8.01.
With Apogee Duet.
It works ok. I occasionally get overload messages - particularly if I try to run a project immediately it opens (LE seems to take a while to load all tracks of a project) - have some projects with 20 tracks - as do the provided examples.
It records fine - voice and guitar, and midi through USB port and midi adapter.
Prior to Duet I use standard i/o ports for in/out audio.
I do not run projects off the my external firewire drive - although the examples work fine in play back mode - I doubt if it would work for complex project re recording - possibly too much contention - and the Duet has my firewire port used.
Freezing tracks helps, and a bity of patience as everything gets paged in.
Your mileage may vary.
Hope this helps
Message was edited by: MrARH
Similar Messages
-
Anyone using a Mac Mini-Is it powerful enough?
Hi,
I'm using GB-2... I think it's 2? Anyway, I'm using it on an older iMac 800-G4, 10.3.9 with 768ram and as I layer more and more tracks (which I like to do as I used to have a big studio back when we used 2" tape), very often even after I've locked as many tracks as possible it freezes and gives me this message that I have too many tracks or effects etc..
I'm thinking of getting a 2 GHz Mac Mini and am wondering if anyone is using GB or Logic or ProTools on a Mini. I have a monitor and an external 500 Gig hard-drive so I thought this would be the most affordable route.
Any input would be greatly appreciated.
TIA
Ri have the dual core intel mac mini and it works great with GB08, i've only ever had a problem twice, when i was running a ton of tracks (like 20) with effects on the whole time. other than that, everything is cool. obviously if i could afford it i'd upgrade, but for now this is fine.
-
2TB Time Capsule or External Hard Drive for use with Mac MINI and AppleTV
Hi,
My current setup is I have a 1TB Hard Drive linked to my intel Mac Mini via FireWire 400, the Mini shares my music and films through iTunes so that my AppleTV can pick them up.
All devices are connected to an AEBS 802.11n (early model) via Cat6 Gigabit cables.
As I have run out of space and am looking for a bigger drive, I wanted to know if I would be able to use the 2TB Time Capsule to hold my films and be able to stream them to the Mac Mini so that it may stream them through iTunes to the AppleTV.
The theory of if should work, as the devices are all Gigabit capable and connected by high quality Cat6 leads their shouldn't be network bandwith issues, I am just unsure of how quickly the TimeCapsule can read stored data from a hard drive and transmit, some of my films are HD and run 4GB plus.
The obvious answers is just to buy a bigger hard drive with FW400, however I would like to reduce the number of boxes I have under the TV, I plan to upgrade my AEBS to the latest one anyway so just thought it made sense to explore this option.
looking forward to hearing what you have to say.Hello,
It should work in theory, but the disk access time of the TC is much slower. I was setup like you are with an external drive connected to a Mini via FW and I had true Gigabit transfer between computers.
When my hard drive failed I sold my Linksys gigabit router and bought a TC to reduce the number of boxes, but I soon learned that the read/write speed on a TC is a little bit faster than on a thumb drive! Not that great. All my machines are also connected with Cat6.
It's still OK to watch a movie though, but transferring 10+ Gb is a pain. -
I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?
1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071 -
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
Mac Mini and LCD TV, changed resolution and now cannot use the screen anymo
hello,
I have a Mac Mini and and LCD TV which is connected via HDMI cable. I was playing around with the resolution settings (not very smart in hindsight) and managed to select a resolution that my TV does not support. I do not have another monitor or Macbook. Is there anything I can do to reset the resolution settings? I tried to reset the PRAM, but that didnt seem to solve the problem. I also tried starting in Safe mode but that didnt do the trick either.
Appreciate your help!Arie, it may be possible to get to System Preferences via the keyboard. But you have to be sure the Finder is the foreground application. Is your Mac set to boot straight into your account or does it pause waiting for a password? If it boots straight into a user account, you can try the following procedure:
\- Restart the Mac (It should be hooked up to the misbehaving display in case that's not clear)
\- When it is done booting, type Cmd-Tab and then Cmd-Q. Do this several times. (Cmd-tab will step the Mac through all the programs that might be running. Cmd-Q quits them. Doing this several times ensures that only the Finder is running since the Finder can't be quit. This is important for the next step)
\- Type Shift-Cmd-a (This should open the Applications folder)
\- Type "sys" quickly (System Preferences within the Applications folder should now be highlighted)
\- Type Cmd-o (This should open System Preferences)
\- Type out the word "screen settings" completely (This should cause Displays to be highlighted in the System Preferences main panel)
\- Hit the Return key (This should open Display Preferences)
\- Hit the Return key again (This will clear any alert box that may have popped up)
\- Hit the Tab key once (This will shift the keyboard focus to the resolutions list)
\- Now start using the up (or down) arrow on the keyboard one press at a time. Each press of the arrow key moves to the next resolution in the list. Wait at least five seconds between arrow key presses for the resolution change to take effect. Hopefully, at some point, the monitor will light up with a stable image and you are back in business. -
i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!
Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com
-
Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?
can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?
Investigate the Air Display App to see if it will do the job for you.
-
We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?
If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac and at least iOS 5 on the mobile devices.
I show those document on my Mac, iPad 4 and iPhone 4S -
Can I use my apple wireless mouse and keyboard with my Mac Mini and Windows PC?
Hello, I recently dug up a windows PC computer for side projects, and I was able to get by using my wireless apple keyboard and mouse for my Mac mini, and then using a usb mouse for my PC, I want to eliminate the usb keyboard and mouse and just use the bluetooth keyboard. Both computers are usually on all the time, and the windows PC uses a bluetooth adapter. I can get my keyboard and mouse to work on both, but I have to sync them to whatever system I would like everytime I want to use it. Is there any solution that when I choose the Mac Mini my keyboard and mouse will work for the Mac mini, and when I choose my windows pc, the keyboard will only be used on windows without having to resync?
To my knowledge, no.
Barry -
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work -
I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?
I have a 2010 Mac Mini running Yosemite and Server which I use
as a headless home server.
I have is set up to allow screen sharing and can connect to it and
control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
that I use as an HTPC.
You can check this out for all the Yosemite Server capabilities:
https://help.apple.com/advancedserveradmin/mac/4.0/
I have iTunes Home Sharing set up on it and have my entire iTunes
library on it. I can then use any of my Macs to play Movies or Songs
from it and only keep locally a select subset of that on my individual
devices.
Rather than and update server, I utilize Server's Caching Service. The caching
server will duplicate any update download (system or MacApp Store purchases)
any time a device that is connected to my network down loads one. The update will
then be stored locally and all other devices will download the update from it which
can be faster than from Apple directly. This has the advantage of only having to download
once with limited bandwidth internet connections. There is also an Update Server service
available, but it is some what more involved in setting up. However, it will download
and store all available updates.
There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
to iCloud, you can set Server up to sync these items across devices locally. -
I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo
Good work, thanks for the report.
Maybe you are looking for
-
Error when using 'service in0/0 session' command.
Good morning everyone, I'm having difficulties with one of my companies UC500 systems. It has been sitting for a number of months with no use, and we're putting it back in to production. When I attempt to take it offline to backup it's old config, I
-
Problem in web dynpro ABAP program
There are 2 input fields on first view carrid, connid and one "GO" Button 1) "FLIGHTINFO" is the node under context of first view 2) " FLIGHTTAB " is a node under context of component controller having cardinality " 0..n " ,Dictionary structure "SFL
-
PIXMA MG6320 Double Sided Business Cards Not Printing Correctly
I just set up and used the PIXMA MG6320 for the first time. Prints regular prints fine but I tried to use inkjet double sided business cards and something when very wrong. The paper seems the same on both sides. The brand is Avery. Side one print
-
Is it possible to change the layout in terms of its shade, font colors and size of fonts?
-
Unable to set up Express A1088
Hi Fellow Humans I'm after some advice and would really appreciate any that you can offer, I recently bought an additional Airport Express to add to my network. My Current network is set up with 1 time capsule and 2 additional express'. I purchased a