Anyone using ColorMunki Photo with Retina iMacs?

I've been successfully using X-Rite's ColorMunki Photo to profile my current MacBook Pro display. I just got a new iMac 27" Retina Display with the upgraded video card.
Tried to profile the iMac, and couldn't get the luminance control in ColorMunki to work properly to adjust the desired (100) display luminance as an early stage of profiling. So went ahead and went thru the profiling process, came to "Save" and did that, and the display turned posterized! I finally was able to figure out how to get back to the 'standard" profile and get rid of the custom profile, but not a pleasant experience.
Has anyone used the ColorMunki to successfully profile their iMac Retina display? Works fine on my MacBook Pro's Retina display, but goes haywire on the iMac.
I will contact X-Rite tomorrow, but would appreciate anything you could pass along on this.
Rick

ADC doesn't work with all monitors with all profiling solutions, so you just have to try it and see if it works. If not, then you always have to remember to turn that check box so you can set the brightness and other settings ADC would normally do manually.
Check the System Preference under Keyboard (Shortcuts tab), and make sure the keys to increase or decrease brightness are off.

Similar Messages

Has anyone used the new 5K retina iMac with Lightroom

Has anyone used Lightroom with the new 5K Imac. If so any problems ?

Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player? This probably cannot be a demo app in that the amout of photos on the slideshows is large.
Thank you,
Jim

Export the slideshow from iPhoto, that makes a movie of it.
Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
Other options:
Burn: http://macupdate.com/app/mac/21992/burn
Toast: http://macupdate.com/app/mac/6351/toast-titanium
But there are lots of others too. Search on the App Store or MacUpdate

Has anyone use camptune x with mountain lion even though says it does not support it yet

HAs anyone used camptune x with mountain lion even though it is not yet specific to moutain lion yet?

Tried it yesterday on my imac 21Jan 2013 running mountain lion 10.8.2, total disaster.
Backed up my boot camp image using winclone (great programme)
Purchased and ran camptune x and everything went fine.
Rebooted into windows 7 and recieved error messages find--set--root--ignore floppies--ignore cd/bootmgr
ERROR 15
Gave me a list of options on screen but none resolved the issue.
Booted back into winclone and used the backup image i had just created to reinstall on bootcamp.
Have emailed the company but have had no reply as yet
**** STAY AWAY until updated for mountain lion YOU HAVE BEEN WARNED ****

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

Can I use another monitor with my iMac desk top?

Can I use another monitor with my iMac desk top? Our monitor screen is going out and would like to have another option then replacing the whole thing! I think A LCD TV would be less expensive than the repairs to our iMac.( OS 10.6.8 )

Yes, but we need to know exactly which year model you have? So that we can advise you on exactly which adapter you need for you iMac.
see > How to identify iMac models
Plus, adding that Computer Monitors make better displays than TVs and comparatively cost a little less than TVs.
For examples of monitors that have both DVI and VGA inputs:
see > LG 21.5" Widescreen FlatPanel LED HD Monitor E2242T - Best Buy
or > HP 20" Widescreen FlatPanel LED Monitor W2071D - Best Buy

I am using i padmini with retina display. i was curious to know if the pdf files saved on adobe reader app are safe from any hacking

I am using i padmini with retina display. i was curious to know if the pdf files saved on adobe reader app are safe from any hacking

If they are saved on your iPad, they are as safe as anything else.
Barry

Is there an adapter that lets you use iPhone earbuds with an iMac?

I have big heavy uncomfortable headphones with a mic that I use for gaming on my iMac.
I'd rather use the earbuds from my iPhone.
Is there an adapter that lets you use iPhone earbuds with an iMac?

I got the splitter, (see link below), but the mic does not seem to work. Apparently, there's a difference between a mic port and a line-in port. Mic ports are powered by the computer, line-in ports are not. They expect a powered signal to come from the input device. The iMac has a line-in port.
I downloaded an app called Line-in that is supposed to give back the ability to use unpowered mics with Macs that lost the abiliy after a system update. It did not work for me. I guess my iMac never had the ability to use unpowered mics.
So I ordered the USB Stereo Audio Adapter below. It's basically a sound card that plugs into a USB port and will work with an unpowered mic. It has not arrived yet. I'll let you know how it goes.
GTMax Headset Adapter: Smartphone Headset to PC Adapter - Use a 3.5mm iPhone/Smartphone Headset With Your PC, Converts 3.5mm Plug to Dual Mic/Audio 3.5mm, for Skype/VOIP
http://www.amazon.com/gp/product/B0046FMRGA/ref=oh_details_o01_s00_i00
Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00

Anyone using iMovie 6 with OS 10.5.3

Anyone using iMovie 6 with OS 10.5.3
I am now using iMovie 06 and iDVD 08 with OS 10.5.2 on a MacPro (working fine).
I would like to here from a 10.5.3 user before getting 10.5.3
Thanks.

thanks Bengt.
I've never done video editing so this is new to me. was surprised at how easy it was with the test video, in this case, being a "flipvideo camcorder" the first step is taking the video clips and then making them into a movie - hence the need for imovie 6.
I will have to now actually read the instructions for doing the next step of editing. initially just wanted to see if it worked with the FLIP cam. now I can have fun learning something totally new.
first think I'm going to do is check what format iMovie6 saves the movie in. the clips are AVI. The tech said they could be saved to another format, but haven't gotten that far yet.
thanks
Sue

Anyone use cfdocument tag with a cfloop

Anyone use <cfdocument> tag with a <cfloop>
I am trying to generate multiple documents like this -
<cfloop query="myquery">
   <cfdocument type=pdf>
        <html>...html code here...<html>
</cfdocument>
</cfloop>
But only the first document is generated in the browser?
my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
thanks in advance

my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
1) Create a folder named, say, docsDir, in the currect directory.
2) Create the PDFs, using Eddie Lotter's suggestion, naming each file dynamically, and storing each in the folder docsDir.
<cfloop query="myquery">
    
   <cfset filename='doc' & myquery.currentRow & '.pdf'>
   <cfdocument format="pdf" filename="#expandPath('docsDir\#filename#')#" overwrite="true">
        <html> Code to generate content of <cfoutput>#filename#</cfoutput> goes here. </html>
</cfdocument>
</cfloop>
3) Zip the folder, docsDir, storing the resulting file, docsDir.zip, in the current directory.
<cfzip action="zip" file="#expandPath('.')#/docsDir.zip"   source="#expandPath('docsDir')#">

Anyone using Database 11g with UCM?

Anyone using Database 11g with UCM? Can't find anything on the customer reference site. Customer wants to be reassured that they are not the first, etc...
Thx.
ft

I know of a few companies that are using 11g ;)
They wont be the first.

Has anyone used iPhone 4s with Oticon Streamer Pro

Has anyone used iPhone 4s with Oticon Streamer Pro

I downloaded it today. Doesn't seem to work. It gives you to the option of playing from "Logic Pro" or "Logic Express". When I click "SET" to set the project to fire, all of my logic files are grayed (assuming that means they are not an option)... Waste of 20 bucks.
Steve
Branson, Missouri

- it doesnt want to drag? Has anyone used this software with imovie?

I am trying to transfer vhs movies to my harddrive using videglide I have successfully recorded it and saved it onto my desktop but I cant seem to transfer the movie to iphoto for editing - it doesnt want to drag? Has anyone used this software with imovie?

I presume you mean Videoglide - which I had never heard of.
Having read the specs:
http://www.echofx.com/videoglide.html
I am wondering how it manages to digitise analogue video from a VCR. For that I use an analogue to digital converter that imports straight into iMovie via firewire.
You should contact the developers of Videoglide for instructions on how to use it.

Has anyone had a problem with their imac because the power company installed a smart meter which broadcasts the readings to the company?

Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless? I've had trouble and when I move the imac downstair it disappears. Help!

barryfromwashington wrote:
would putting up a metal shield by the meter help?
It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change.

Anyone using ColorMunki Photo with Retina iMacs?

Similar Messages

Maybe you are looking for