Anyone using CS4 on P4 running XP

A friend has asked if I would enquire about the potential success of his running CS4 on XP SP2, Asus P4P 2.8 ghz mobo, 3 gigs ram, quadro 500 video card. Anyone doing that with reasonable success? Thanks in advance.

I tried installing on my P4 3Ghz laptop with 2 Gig Ram. PP, AE would not work at all. PS,Ill and Bridge would. I think it was because of the older video card installed.

Similar Messages

Question for Anyone Using CS4 Production Premium with Windows 7

I'm testing Windows 7 at home with CS3 Production Premium and have not had any issues. Of course CS4 is quite a bit different.
Anyone using CS4 Production Premium on Windows 7 regularly? Any issues to report?
Thanks

Thanks for replying to my post:
mark_m wrote:
"I notice that when I open an old CS4 project and PPro asks you to locate the file, that the "show only exact file name" tick box seems to have no effect.
This is on Windows 7 RC 64bit."
On our systems at work that have XP and Vista + CS4 Production Premium. I've noticed this with preview files in particular and possibly some others, I don't remember. The "show only exact file" checkbox is greyed out. This is somewhat annoying because projects can have a huge number of preview files with long cryptic names making it a pain to locate the correct one manually to get the ball rolling. If I don't think it'll take too long to re-render, I just select "skip preview files".
We bought 3 licenses for Windows 7 and I'm encouraged by the performance, reliability and features on my home test system (RC 64) that has CS3 installed. Can't wait to get rid of XP and Vista.

Anyone using CS4 or CS5 on Virtual Windows?

I have a few issues with the clone tool in both CS4 and CS5.
Basically it says program error when I try to clone.
Any and all ideas appreciated
Diana

Looks like no one answered your request... Perhaps you didn't give enough explanation.
Can you be more specific about what you mean by "Virtual Windows"?
I run Photoshop in VMware virtual machines, running 32 bit XP, Vista, and Windows 7 for testing. I don't see any problems with the clone tool.
-Noel

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

Anyone using Blackmagic Intensity Pro with Premiere CS4

I've looked through the threads and have seen similar postings, but no real good answers. Is anyone using Blackmagic Intensity Pro to viiew timeline on a HDTV using the HDMI connector?
I purchasedf the Intensity Pro and can't get it to work with CS4. Any assistance would be appreciated.

If you're using a Core i7 processor, one of the problems might be with the motherboard. There's only one Intel board that BM has approved (sorry, don't have the model in front of me -- on a piece of scratch paper in my wife's car).
I'm looking to build a new system myself and have been looking at the Intensity Pro card as well. The main feature I'm looking for is real-time preview and program output to an HD monitor that I'd hook up via HDMI. I probably also would use it to capture analog sources for audio and video. I don't have any interest in BM's lossless data capture as it creates monster-sized files. That's why I was also planning to add Cineform once it's fully approved and working for CS4. However, as best as I can tell, the Intensity Pro card doesn't recognize the Cineform codec on the timeline. Does anyone know if and how well these two will function together within Premiere? (I'm also assuming that the new 4.1 release might make these types of Premiere add-ons work better.)
Thanks.

Has anyone used Migration Assistant to move services from one system running Server to a new system?

So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it.

Has anyone used Canon 5D Mark II with PrPro CS4 yet?

Hi,
Has anyone used the Canon 5D with CS4?
Do the files open ok?
Just wondering as I am going to hire the camera for a day as the footage is amazing!
Best wishes,
scott mackenzie

There are plenty of great threads on this material. As John points out, most will pop right up. Be sure to read replies by Jeff Bellune and also PaulieDC. This ARTICLE has some links to useful info on this camera.
Good luck,
Hunt

Running Fireworks CS4 Trial Version after Using CS4 beta

I tried out the Fireworks CS4 beta some months ago, but after
getting tired of all the bugs, I uninstalled it and decided to wait
for the released Trial Version. I downloaded that today and
installed it, but when I try to run it I get a message that says
"The license for this product has expired." and then it quits,
never fully loading. I'm guessing this has something to do with the
CS4 beta I had previously installed and uninstalled. Perhaps I
didn't uninstall it properly, but now I need to know how to move
forward so I can give the release version of Fireworks CS4 and
proper evaluation.
Any ideas on how I can get the CS4 Trial Version
running?

Uninstall the trial.
Then dl/run the clean up script here
http://www.adobe.com/support/contact/cs4clean.html
Install trial again.

Action written in CS4 won't run correctly in Elements 11 - specif. the "selective color" layer

I created an action using Adobe Photoshop CS4, and it runs correctly in CS4. When I save and load the action into Elements 11, there is a problem with the selective color layer. The selective color layer shows up in the layer stack along with the expected message that it can't be edited b/c it was created in the full version of Photoshop. However, the layer itself does not have any color/changes in it.
In Photoshop, the selective color layer makes the photo look pink. When I run the action in Elements11,the selective color layer does absolutely nothing to the photo. I do have the eye turned "on" to view the layer, and it's set at the correct blending options & opacity (normal, 100%).
If I run the action in Photoshop, save the file with all the action-created layers, and reopen the file in Elements 11, THEN the selective color layer shows its correct pink color. But when I run the action as a stand-alone action in Elements11, it does not.
Can anyone offer help as to why this is happening? Is there something special I need to do to make the action work correctly in Elements 11? My understanding was that it should RUN and create the layers correctly, although some of them will not be editable in Elements11. However, as it stands, it is not creating them with the correct color.
Thanks in advance for your help!

You probaly need to record the action in a little different way in photoshop cs4 to get the selective color adjustment layer to work.
Try something like this:
1. In photoshop cs4 add an selective color adjustment layer, but don't do any adjustments and stop recording the action.
2. Undo the selective color adjustment layer and then double click on on the selective color adjustment layer step in the actions panel
and when the dialog opens set your adjustments and click ok.
Now it should work in pse 11:

The MessagePerformanceUtils:totalTime issue in Flex 4 (rpc.swc) using LCDS 3.1 running under JDK1.6

We are facing an issue while using LCDS 3.1 running under JDK1.6 in Sun Solaris v5.10 OS & Adobe Flex 4.
Scenario :-
===================================
As part of our Flex-based client-server application (with Java backend) we have a performance report generation module. Following flex framework class is used to calculate the performance of various layer of a typical server-based request-response cycle.
; (available in rpc.swc library file)
(for example : server time, cairngorm time, UI screen rendering time, UI event generation time etc).
The totalTime was working properly before upgrading the rpc.swc to Flex 4 ; However it broke after migrating to Flex SDK 4; The totalTime is now coming as negative junk value.
As we understand that the above Flex framework class method works in conjunction with LCDS running at server side on JDK.
We suspect that the new rpc.swc taken from Flex SDK 4 is causing the issue !
System information :
Web Server : Weblogic 11G
Operating System : Sun Solaris v5.10 OS running on Sparc hardware.
Flex : Adobe Flex sdk 4.0
Flash player : Adobe Flash Player 10
Browser : Internet Explorer 8
LCDS : 3.1
JDK : JDK 1.6.0_14
===================================
Has anyone faced similar problem before ? Any help or direction would be highly appreciated.
Thanks in advance,
Rabi
mx.messaging.messages.MessagePerformanceUtils :totalTime

Nothing has changed in the Flex SDK sources for this class since sometime around 2008. Are you running against the same LCDS server as you were before you updated to Flex 4? This certainly seems strange (and bad). Do you see the same behavior with Flex 4.5? What was the version of Flex you were using before switching to Flex 4.0?
If you can provide the additional information, we will look in to this. A reproducable case that was a simple mxml application along with a simple destination config would help us narrow the problem.
Sorry for the problems!
Tom

Is anyone using the Calendar Server to send external invites?

Is anyone using the Calendar Server to send external invites?
We have a Mountain Lion server running DNS, Open Directory, File Sharing and VPN. We have recently stood up the Calendar server and it is working very well. Internal invites work fine and are instantaneous to computer, iPhone, iPad. We have the ports working so that calendar items created outside the network work fine as well. Only problem is we cannot invite anyone with an external e-mail address. Each time we do the Calendar Error Log populates with:
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 5
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 4
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 3
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 2
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 1
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] [twistedcaldav.mail.MailHandler#error] Mail gateway failed to send message <[email protected]> from [email protected] to mailto:[email protected] (Reason: Failure with multiple causes.)
We have set up an internal e-mail address. I have confined that it works fine. I have tried more than one internal account. I have also verified the settings through the command line by typing "sudo serveradmin settings calendar" The iMIP sending and receiving information is correct. There is no authentication type setting listed in the command line output even though there's a place to choose it in the Enable invitations by email - Edit button on the third screen. No matter what I choose it goes back to "login" and still doesn't work.
The command line settings mention a port number 62310 as being the MailGatewayPort but opening that port on the network's firewall makes no difference. As I said external set up works fine from Mac/iPhone/iPad and push notification works fine as well.
Is anyone using this functionality?

I'm sorry. I forgot to add Mail to the list of services. I AM using mail on that server. Here's the iMIP portion of my settings output from Terminal.
calendar:Scheduling:iMIP:Sending:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Sending:UseSSL = yes
calendar:Scheduling:iMIP:Sending:Username = "calendarserver"
calendar:Scheduling:iMIP:Sending:Address = "[email protected]"
calendar:Scheduling:iMIP:Sending:Password = "password"
calendar:Scheduling:iMIP:Sending:Port = 465
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "calendarserver"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
So Add mail to the services being used. Since Calendar is running on the mail server one would assume that it could communicate with it fairly easily.

Firefox won't insall into my applications folder. Says can't install because libsmime3.dylib is in use. I am running Mac Os 10.6.7 on a Macbook Pro. I can run firefox okay from the disk image but just won't install into the apps folder.

My system is a Macbook Pro running Mac Os 10.6.7 with a 2.8 GHz Intel Core 2 duo processor with 4 GB 1067 MHz DDR3 ram. The upgrade downloads fine, but when I try to drag the firefox image onto my appication folder, I get a dialogue box that says...Cannot install application because "libsmime3.dylib" is in use. I can run Firefox fine from the disk image.

Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help.

What kind of throughput should I expect? Anyone using AQ in high volume?

Hi,
I am working with AQ in a 10.2 environment and have been doing some testing with AQ. What I have is a very simple Queue with 1 queue table. The queue table structure is:
id number
message varchar(256)
message_date date
I have not done anything special with storage paramteres, etc so it's all defalt at this point. The I created a stored procedure that will generate messages given message text and number of times to loop. When I run this procedure with 10,000 iterations it runs in 15 seconds (if I commit all messages at the end) and 24 seconds if I commit after each message (probabliy more realistic).
Now, on the same database I have a straight table that contains one column (message varchar(256)). I have also created a similiar storage procedure to insert into it. For this, 10,000 inserts takes about 1 second.
As you can see there is an order of magnitude of difference so I am looking to see if others have been able to achieve higher throughput than 500-700 messages per second and if so what was done to achieve it.
Thanks in advance,
Bill

Yes, I have seen it. My testing so far hasn't even gotten to the point of concurrent enqueue/dequeue. So far I have focused on enqueue time and it is dramatically slower than a plain old database table. That link also discussed mutliple indexed organized tables being created behind the scenes. I'm guessing that the 15X factor I am seeing is because of 4 underlying tables, plus they are indexed organized which adds additional overhead.
So my question remains - Is anyone using AQ for high volume processing? I suppose I could create a bunch of queues. However, that will create additional management on my side which is what I was trying to avoid by using AQ in the first place.
Can one queue be served by multiple queue tables? Can queue tables be partitioned? I would like to minimize the number of queue so that the dequeue processes don't have to contain multiplexed logic.
Thanks

Anyone using a Yamakasi Catleap 2703 Monitor with a Retina Mac Book Pro?

Hi,
Anyone using a Yamakasi Catleap 2703 Monitor with a Retina Mac Book Pro? If so, is it working well and would you do it again? Is it compatible with the Apple dual DVI cable?
Thanks,
Alan

I just got a Yamakasi precision 2703. I'm using it with a 13" macbook pro (non retina). I got it working with a thunderbolt / minidisplayport to dual link DVI adapter from monoprice for $~70. At first I didn't think it was going to work, plugged it in, turned on the display, nothing happened. I unplugged, plugged the USB cable back in and the monitor came to life. Working great so far. I bought mine from green-sum on ebay. The recommend not using this monitor with apple computers due to overheating issues... I don't see why that would be the case, though. I've only been running it for a couple days, but so far no issues, and I've been happy with the monitor, no dead pixels, no bleed in the corners.
The monitor stand on the 2703 isn't too bad, a little wobbly but not as bad as the others from what I've read. The monitor does sit a little low, though. I have a much sturdier stand coming from monoprice for $20+shipping, which will provide tons of adjustment, both height and rotation.
Good luck!

Is anyone using a 1252 ap in bridge mode with channel bonding?

Is anyone using a 1252 ap in bridge mode, with channel bonding?
I had a question a while ago from a customer with regards to bridging with a 1252 ap to increase throughput for a wireless link he was using, from the throughput improvements in 802.11n. At the time I spoke to Cisco Pre-Sales, and they indicated that the bridge function in the 1252 exists for 'testing' purposes. I advised our customer that although it should be possible to implement, we may run into difficulties with TAC support ect. in the event of problems with the link.
Can anyone comment if this is a Cisco validated/approved design now?
Also, has anyone done this and tested the throughput achievable?
Has anyone bridged both 2.4Ghz and 5Ghz radios on a 1252?
The reason I ask is I've seen a note about a Cisco 5Ghz 802.11n bridge being launched.
Thanks in advance.
Alex.

Hi All,
Thanks for all the feedback; I have finally done some throughput testing with the 1252's. Please note, this is very rough, just to give an idea on throughput that's achievable, and what you can enable. Did this a few weeks back, and have now wiped the cnf, so dont have the show runs any more....
The two devices were set up a few feet apart, with the standard 2dBi and 3dBi antenna.
All tests done on the 5GHz radio with Autonomous AP IOS.
I did data transfers via a laptop either end of the link; transferring data using the Test TCP utility (wasn't going for scientific tests, just getting some idea of throughput).
802.11a @ 54mbs (20Mhz chan) WGB - root to non root = 2.43 - 2.5MB/Sec = 19.44 - 20 Mbps
802.11a @ 54mbs (20Mhz chan) WGB non root to root = 2.42 - 2.44MB/Sec = 19.44 - 20 Mbps
802.11n @ 'n' rates( 20Mhz chan) WGB root to non root = 6.18 - 6.33MB/Sec = 49.44 - 50.64 Mbps
802.11n @ 'n' rates ( 20Mhz chan) WGB non root to root = 4.77 - 5.00MB/Sec = 38.16 - 40 Mbps
802.11n @ 'n' rates ( 40Mhz chan) WGB root to non root = 8.59 - 8.58MB/Sec = 68.64 - 68.64 Mbps
802.11n @ 'n' rates ( 40Mhz chan) WGB non root to root = 6.35 - 7.20MB/Sec = 50.8 - 57.6 Mbps
802.11n @ 'n' rates ( 40Mhz chan) Bridge root to non root = 9.73 - 10MB/Sec = 77.84 - 80 Mbps
802.11n @ 'n' rates ( 40Mhz chan) Bridge non root to root = 8.40 - 8.57MB/Sec = 67.2 - 68.56 Mbps
So basically, as per the above posts, you can implement bridging on the 1252's and utilise the 802.11n rates and features, SGI, Spatial Streams and Channel Bonding etc, to achieve higher throughput.
Also, as per the above posts, this is still not supported by Cisco, so, in my case, I'd be highlighting that to customers straight off, but don't see it as too much of an impediment to deploy, as long as the customer weighs up the risks.
On a side note, I attended a Cisco session recently, and was told that the 802.11n Bridge, (the 1430?) was on hold indefinitely. My feeling is that this makes it more pressing that Cisco introduces support for bridging on the 1252.
Get in the ear of your local Wireless SE's, the more they hear it, the more they'll moan to the Wireless BU in San Jose! ;-)
Bridging with 802.11n has some interesting possibilities, I worked with Alvarion 5GHz bridges 6 or 7 years ago, that could do 'near LOS' - Worked well in cities, using reflection of the RF from buildings. I had never heard of 802.11n back then, but I'm guessing Alvarion was using MIMO to achieve good non-LOS connectivity in the 5GHz band.
Cheers,
Alex.

Anyone using CS4 on P4 running XP

Similar Messages

Maybe you are looking for