Anyone using LabVIEW for MicroArrays?

I am interested in using LabVIEW to automate MicroArray applications. Is anyone currently doing this?

Hello,
That’s a great question. Below is a link to a demonstration application designed to show how National Instruments Hardware and Software can be used to produce a custom
microarray scanner. I hope this helps!
Best Regards,
Chris J.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=C3D764B6B6B42C3DE034080020E74861&p_node=DZ52490&p_source=External

Similar Messages

Using Labview for Interpolation by minimum curvature method

Hi,
I'm currently seeking a VI that will enable me to
use Labview for Interpolation by minimum curvature method.
Can anyone help me? I'm looking for something that will
Interpolate values Z at known points with coordinates X, Y
to values ZI at points with coordinates XI, YI.
Regards,
Gilles

Hi Cyril,
Thanks for your followup! Any idea where I can find such
a formula/book?
Regards,
Gilles
Cyril wrote in message news:<506500000005000000196D0000-1017707437000@exchange.ni.com>...
> Gilles,
>
> LabVIEW doesn't have a function that will spline a three point surface
> plot. I would recommend looking into a statistical analysis book and
> find a formula to set up a 3 point spline function. Then enter that
> function into the formula node in LV. I hope this helps

Anyone using PDDocExportUserProperties for exporting PDF to XML

Hi,
Anyone using PDDocExportUserProperties for exporting PDF to XML. I am using Adobe PDFL 9.0 to do the same. However, do not find any sample programs or tutorials.
Please anyone have any samples, do provide.
-Abhi

> PDDocExportUserProperties
Where did you find this method? It's not listed in the PDFL API Reference for 8.1 or 9.

Have anyone used IDOCs for FB01 posting ?

Have anyone used IDOCs for FB01 posting with posting keys ? If so please help me with the code.
I am using posting keys 15 for the first line item to Customer account(Credit) and posting keys 40 for the second line item (Debit)

DID you find in which User exit you are going to Code? Then we can ref old posts.
then you will get the code. not same belongs to FB01, for othre
Regards,
anjireddi

Using LabVIEW for temperature control with AMREL SPS200-50-A022 power supply

Hi, I hope someone can help me out. I'm an ME undergrad with pretty much no knowledge of LabVIEW. I am working a project which requires a temperature controller. Previously, we were using an SPS120-10 power supply from AMREL and a grad student wrote a LabVIEW VI which performed feedback temperature control. The VI would acquire temperature from a Benchlink which acquire the temperature from a thermocouple. The VI also monitor the output voltage & current and determine the power output and heater resistance from those values. When a desired temperature is set, the VI compares the actual temperature to the set temperature and adjust the voltage/current setting to achieve the desired temperature. The VI was designed to keep temperature deviation to within +/-0.5 deg C. I'm not sure of the data refresh rate, but it's on the order of seconds since the system has a small thermal mass and we're operating in the 800+ deg C range. When we were using the SPS120-10, the device used GPIB for communication with the PC. Due to higher power output demand for the heater, we switched to an SPS200-50, which only has an RS-232 port. First of all, I was wondering if someone could help me modify the VI so that it could communicate with the SPS200-50 through the serial port? In addition, the drivers for the SPS120-10 and SPS200-50 might be different. If modifying the VI to communicate through the serial port isn't enough, I would need to figure out where to modify the VI with the SPS200-50 drivers, which is provided by AMREL. If anyone would like, I can send you the VI files so that you can take a look at the block diagram and tell me where to modify it. I'm still not 100% certain I understand how to read LabVIEW block diagrams.
Please let me know if you need any additional information. Any help would be appreciated. Thanks in advance!

I have looked over your vi. First of all you have to do some changes in the "ARSPS Initialize.vi" See picture.
The best way to check instrument communication is to send the *IDN? Command. The instrument will indentify itself in response to this command. The vi I have included is a labview example. Use this Vi to test your communication. Do not progress before this is working. The VI is also an excellent example on how to set up and close down RS232 communication.
The VI "Tfeedbackpowercontroller-nolvdt-Dinh.vi" looks OK so I guess it will work then your RS232 communication with the SPS200-50-A022 is working
good luck
PS as mentioned before you will find all the RS232 details in the instrument manual
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
sample.PNG ‏38 KB
Basic Serial Write and Read.vi ‏29 KB

Has anyone used Motion for 'still graphics' (300dpi)?

I used Motion a lot several years ago on a film. Great app. I'm producing a series of Ebooks right now, with many graphics. I'm using Pages, Photoshop, EasyDraw, for the graphics ... but remember how marvelous Motion was.
I'm wondering if it is possible to use Motion just for doing still graphics? And how one might set the resolution to reflect this (something like 300 dpi), ... or can one set any size (a very large 72dpi (given it's designed for motion and video) that can then be translated to 300 dpi after the fact.
If anyone has ever used Motion for simple non-motion graphics, I'm all ears,
Ben

First of all, create a new document in Photoshop: enter your output format (US Letter, A4, whatever) with 300 dpi settings. Then change your units from to pixels and that is the size that your motion project should have.
Remember though, that Motion outputs only in RGB that has a much wider gamut than CMYK, which is the colorspace of print. So you might still have to color proof your image in Photoshop.
Also, depending on your graphics card, Motion has a limit of image sizes it can work on: 2K, 4K or 8K in the current models. For large print formats that could be not enough.
I would never use Motion for print jobs. However I can imagine that I could export (with transparency) some effects like stills from animated particles, 3D replicators and import them into my photoshop composition. So Motion could be used more like an extra tool.
Michal

Has anyone used MDC for R/3 Systems?

Hello,
We have a custom transaction that we run against our R/3 (ECC 6.0) system that's performing poorly. Adding an index helped but it's not enough to make the transaction run within the 10 minute timeout period configured for dialog processes. I am testing defining the table as an MDC table. I know SAP supports this for BI systems but has anyone tried it for R/3?
Thanks,
Florencio

Hello Florencio,
here I have to correct Maltes statement.
INCLUDE columns in an index, MDC tables and some other DB2 features are "supported" in the ABAP DDIC. Supported here means that if a database object which uses one this these DB2 specific features needs to be changed (for instance during an upgrade) the ABAP dictionary will ensure that these features survive the modification.
We know that there are scenarios where it makes sense to use these DB2 specific features. So, if you know what you are doing, you are free to use MDC organized tables, INCLUDE-columns in indexes etc. in your R/3 OLTP system.
To find out what exactly is supported by the ABAP DDIC, please refer to chapter 7.3 ('Tables and Indexes') in the [DB2 Database Administration Guide|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03d5fb8-b619-2b10-c383-c6d56872829e]. Not all features are supported in all R/3 versions.
Also note that the support for specific DB2 features is continiously extended. For the forthcoming version of DB2 e.g. we plan to support table partitioning in the ABAP data dictionary.
Regards,
Johannes

Anyone use Cloudshare for Sharepoint development?

We need to develop some sharepoint solutions for both existing and future customers. Version varys, and we only have a MS Sharepoint 2013 license through MS Partner currently purchases. We have hence been looking at Cloudshare and there Team License as it fits in well as we have 3 developers that need the access to create.
Does anyone use or have used, or even use an alternateive that we can look at?
Any comments appreciated.
This topic first appeared in the Spiceworks Community

Not for imaging purposes.
You could have an environment that is ready-to-go with the bits installed, but not configured. You would then have a post-imaging script that would configure the farm. In this process, you would also need to make sure SQL Server was aware of the server's
new name (see http://technet.microsoft.com/en-us/library/ms143799.aspx).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is there a way to use Labview for Linux for IBM AIX 5.1.

I think any application built for linux can run on the AIX 5.1 if the application is recompiled on the AIX 5.1. So theoretically NI can just recompile there Linux version of Labview on the AIX 5.1 and it will work. Is there a possibility that NI will port Labview for AIX 5.1.

I think that the use of LabVIEW for linux is platform independent as far as hardware. I believe that as long as you are running a compatible GUI (I believe XWindows and KPT??? are two that are recommended - check ni.com/linux for more information. So, for your purposes, as long as you can install the proper GUI, and then LabVIEW for Linux, you can then run, code, compile, and deploy applications on the AIX 5.1.
I am personally VERY interested in knowing about your success (or failure, should that unlikelyhood occur) on Linux. If you browse the topics, there is actually one on non-windows useage of LabVIEW. I am currently setting up my first Linux machine at my home office, and am very curious to know how other people do with this 'adventure into unc
harted territory'. The only documented useage I have seen is in Gary Johnson's newest edition of Power Programming.
Good luck, and please keep us posted. I sense that I am the only LabVIEW for Linux fan besides yourself. But please feel free to post to this thread, and to the topic.

Anyone used Scala for a medium project?

I'm just starting to teach myself Scala and I'm wondering if anyone here has used Scala for a medium projects (something that took more than a weekend but not more than a few weeks) ? I'm not sure what sort of programs I would use Scala for. I use C for all my lowlevel bit pushing and Python for just about everything else (including art generators and a clone of Jekyll). What itch do Archers scratch with Scala?

I find clojure to be a more interesting jvm language than Scala, personally.
*shrug*

Underwater Photos: Anyone use Ilife for adding back red colors?

I use Ilife for my organizing my underwater photos. Often they are not truly representative because of the loss of red. Some programs have filters that are designed specifically for underwater corrections. Does anyone know of one that will work with Ilife.
Thanks so much.
Skip

Photoshop or Photoshop Elements has tools for color corrections. You can set the white point and have all color in the photo adjusted based on that white point. Or shift the colors yourself by adding red, reducing blue, etc. until you get the look you want. I just don't know of an automatic Underwater correction.
Regards.

Anyone using DropBox for LRCAT file?

It seems that when I use my laptop to add keywords to LRCAT, I wind up with a conflicted copy in my dropbox folder...
Is there some way to reconcile or combine the regular lrcat and the conflicted one? Or do I have to just start using the conflicted one?
I know this all has something to do with waiting for all the files to upload and download to DropBox, and I usually don't have a problem since the 2 machines are rarely in use at once...but sometimes I need to shut down quickly or perhaps I miss part of the transfer, so I'm really just checking to see if there is some way to reconcile when I blow it.
Thanks
Tom

I use Dropbox for my personal catalog. The key is to ensure it's finished fully uploading and downloading before you switch machines, otherwise you end up with conflicted catalogs, as you've found.
There are ways and means of merging the catalogs (export as catalog then import from catalog) or just picking the latest (i.e. delete one copy and rename the conflicted one) but they really do create a lot of extra work, so I'd strongly recommend avoiding that situation.
Also just bear in mind that it's not officially supported by Adobe, so keep regular catalog backups.

Anyone using OEM for scheduling backups?

I'd like to see a poll for the number of users using OEM for taking database backups. Had some interesting conversations with some colleagues via social media and it seems like some DBAs don't trust OEM for their backups even though the feature works IMO.
Are you using OEM to do backups?
Edited by: DBA on May 3, 2012 1:02 PM

I have 91 scheduled recurring backup jobs running through OEM 12c BP1. They work quite well. I've only noticed a few problems and nitpicks:
1) Occasionally, for unknown reasons, a backup job against a newly-added database target will fail stating that the backup cannot be run since the database is closed. The database is not closed, it's up and running fine. Changing the backup job to run using SYS as SYSDBA credentials resolves this problem.
2) Identification of failed backups is not as customizable as I would like. For example, if I have a full "backup database plus archivelog" running, and during the course of that backup an archivelog backup runs and deletes archived logs, OEM will report that the backup job has failed since RMAN throws an error about not being able to backup an archivelog it expected to find. I dealt with this by adding SKIP INACCESSIBLE to the backup statement. I'm not totally comfortable about that but I monitor for offline datafiles so I consider this only a minimal risk. Our custom backup scripts used to catch this warning and ignore it.
3) It's really annoying that, after creating a backup job through the target Availability -> Schedule Backup tool, I cannot then run a 'Create Like' against that backup job to create a nearly identical one against a different database target. You have to schedule each of them from the Schedule Backup tool. Clicky clicky clicky clicky.
4) A backup job created through the 'Schedule Backup' tool has a job type of 'Database Backup', therefore when the job fails a high-availability incident is created, so you can configure incident rules to receive notification of this event. This is good. Unfortunately a backup job created from the Jobs page has a job type of 'RMAN Script' does NOT create an incident on job failure out of the box. I've had difficulty configuring incident rules to catch failures for RMAN Script job types. This is not good.
5) The repeating schedule options for jobs are limited compared even to something like cron. I can schedule a job for a day of the week, or a day of the month, but cannot easily schedule a job for "the first Tuesday of each month". This can be worked around.
6) After creating and submitting a backup job through the Schedule Backup tool, you cannot edit the RMAN script without recreating the job. You can only edit the RMAN script before submitting the job. I deal with this by having my backups run stored scripts in the recovery catalog, and make the changes there if I need to change something.
7) It is very annoying that if I 'stop' a repeating job (instead of suspend), there is no way to resume that job. It has to be recreated. This is my own user error -- I just don't click the stop button. Not OEM's fault but I'd rather not even have that button.
8) No ability to sequence jobs. You can sequence steps within a job, but then the entire job succeeds or fails as a unit. If you want to back up database A then immediately back up database B afterwards, you have to create a multi-task job. The multi-task job has the same problem as item #4 above such that it does not create a "backup failed" incident when the backup fails.
Even with all of these gripes, I am quite pleased with the backups I have running through OEM.

Have anyone used Labview to call MSP430_Memory function in the MSP430.dll?

Hi,
I am trying to read data from Infromation Memory of a MSP430 MCU. I am using MPS-FET430UIF to communicate with the MCU and having trouble to get data using the function MSP430_Memory. Have anyone done this before? I greatly appreciate any help from this forum.

Good Afternoon,
I just have a couple of quick questions for you:
How are you going about calling the dll in LabVIEW?
Are you using the call library function node?
Could you post your code so we can take a look at it and get a better idea how you are going about it?
I hope you have a great rest of the day!
-Cody C

How can i use labview for communicating with pic18 microcontroller through usb port?

Hi all,
I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
controller which will make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Anyone using LabVIEW for MicroArrays?

Similar Messages

Maybe you are looking for