Anyone using Login Pro and PowerCore Firewire

I have a G5 dual 2 gig with 4 gigs or RAM, 2 x 160 LaCie HD, RME Firewire 800 and PowerCore Firewire. I have been having issues with PowerCore losing connection, plug-ins load and are disabled, and total system lockups.
For testing, I removed all audio IO drives and used internal audio, remove all midi drives and I am still having the same issues. Anyone using Login Pro and ProwerCore Firewire successfully?

I am on the same machine as you. Most of my problems (similar to what you report) have been due to the driver/software of the Powercore. Luckily for you, TC doesn't have phone support, so you can be spared the immediate relief you don't want and wait the 48 hours for a general email response that says you get to wait another 48 hours until someone gets back to you.
That said, Powercore FW works fine for me. It sounds like you are using a lot of FW devices, which might also contribute to your problem. I've found that you can actually overtax the FW ports on G5's to the point where they stop working properly, causing random connection loss.
Does the powercore connect through any other device?
Trying unplugging your LaCie's and see if that helps.

Similar Messages

  • Anyone use hypersonic 2 and logic express 9?

    anyone use hypersonic 2 and logic express 9?
    Message was edited by: Kajun Muzik

    Actually I have found a way for at least the instrument plug ins to be accessed.
    I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
    Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
    If not already installed, get SoundFlower. After installing it.
    A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
    B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
    C) Press RECORD and start playing, LE captures Mainstage's sound.
    I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

  • I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
    Clinton

  • I bought a barely used MacBook Pro and I have an old MacBook...

    I bought a barely used MacBook pro and I have an old MacBook. Is there a way to make the MacBook Pro as a new out of the box computer, so I can send all my data to the "new" computer?

    The Migration Assistant doesn't erase anything - it migrates or transfers data from one Mac to another, but it is a good idea to update your Mac's backup you will be migrating or transferring the data to before doing so to be on the safe side.

  • I purchased a used macbook pro and want to set it back to original factory settings

    I purchased a used macbook pro and want to set it back to original setting

    What to do before selling or giving away your Mac
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • About a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    about a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    how can i get All music transferred? even non purchased

  • HT201376 just got a used macbook pro and want to restore to facory settings how do i do is

    I just got a used macbook pro and want to restore to factory settings....how do i do this safely?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (118569)

  • Has anyone using a PowerMac and Tiger got a Phaser 8570?

    Has anyone using a PowerMac and Tiger got a Phaser 8570?
    There are drivers for IntelMac 10.5 and 10.6, but nothing for PowerMacs.
    I was thinking of upgrading from our 8550 - if there's a driver that will do - anyone able to help?

    Additional information.
    Had some problems with the 8550 and decided to take up a Xerox trade-in offer.
    The ColorQube 8570 not only works perfectly with Tiger, it's a lot faster and quieter than the 8550.
    Which answers the question.

  • Anyone using Quickoffice Pro HD app??  Does it work well working with USB drives to transfer data on/off IPad?

    Anyone using Quickoffice Pro HD app??  How it work well using USB drives to transfer data??

    sbgoldendog wrote:
    Anyone using Quickoffice Pro HD app??  How it work well using USB drives to transfer data??
    It doesn't. Nothing does except for specific graphic files, as was expressed in your other thread. You will need to synch with iTunes to transfer files, or use a cloud based service (which QuickOffice does).

  • Just bought a used mac pro and it has 4 video cards?

    Hi all, I just bought a used mac pro and it has 4 Geforce 7300 GT video cards in it. Why would it have 4? Is it just to display on 8 monitors, or can OSX use the power of each card? Is there anything I can do to take advantage of these extra cards? sell them?!

    No, OS X cannot combine the four cards. All they are good for is to connect 8 monitors. If you don't plan to do that then you're better off removing three of them (only the upper three.) This will save energy - roughly 50-75 watts per card - and the computer will be cooler.

  • Use macbook pro as external firewire cd drive to reformat iBookG4 with boot disk?

    My cd drive has failed on my iBook. Can I use firewire to connect my iBook to my macbook pro and use the macbooks cd drive as an external bootable drive?
    Thanks!

    That's a good idea. You may be able to do that. Plug your iBook into your MacBook Pro using your firewire cable, start your MacBook Pro up (with the disk inside of the MacBook Pro's optical drive) while holding down the "T" key on your MacBook Pro's keyboard (make sure you get a large firewire icon on the MacBook Pro's display), start up your iBook while holding down the "Option" key until you get a screen displaying available boot drives. If all goes well, you should see your iBook's internal hard drive, your MacBook Pro's hard drive, and hopefully the disk in the MacBook Pro's optical drive. Use the arrow keys or trackpad on your iBook to select the drive you wish to boot from and if all works properly, your iBook should boot.

  • I bought a used MacBook Pro and didn't come with an install disc.

    I recently purchased a used MacBook Pro, it is the 2006 15.4inch, with 1.83GHz Intel core duo processor. It didn't come with RAM, a charger or the instal disc and the battery was dead. I installed RAM, bought a battery and charger and it booted up no problem, but I can't get past the login because I don't know the previous owners password. How do I get passed this point so? What OSX do I buy?

    In the mean time try this: Run Mac Setup Assistant -
    Restart the machine with the Command and S keys held down, and type the following commands into the prompt in order:
    mount -uw /
    mv /var/db/netinfo/local.nidb /var/db/netinfo/local.nidb.old
    mv /var/db/.AppleSetupDone /var/db/.AppleSetupDone.old
    usr/libexec/create_nidb
    shutdown -h now
    The Setup Assistant will reappear the next time your computer is turned on. Be sure to enter the commands properly. You will be able to setup your user name password, etc. You can then delete the previous owners User.

  • Want to use Premier Pro and After Effects but don't want to buy CC

    I have CS6 Design/Web Premium standalone edition and want to add Adobe CS6 Premier Pro and CS6 After Effects Standalone to the group.
    I've downloaded the trial versions of Premier pro and After Effects to get me past this recent job issue, but I may need to purchase it after the trial runs out.
    If the job I've got pending does not pan out I'll go back to using Final Cut X and Motion.
    But if it does pan put I'll want to buy the standalone versions as I'm not into Hacking and Kracks.
    I do not like the idea or want to "upgrade" to CC so please no suggestions about this.
    Any clues. For some reason I'm not able to ask Adobe directly as they do not appear to supply and email address to be contacted, and I'm now on this forum sharing my questions to the community.
    Anyone out there with an idea to help in this regard?

    Hi,
    You can buy standalone Premiere Pro and After Effects CS6 from the below link:-
    Creative Suite 6
    You can also contact our Sales Team
    Contact | Adobe
    Thanks
    Sarthak

  • Problems with using Macbook Pro and Cinema Displayscreen

    I have a Macbook Pro running Snow Leopard (too scared of what happened to my wifes Mac using Lion). I have Parallels on it with windows 7. I use that to run Autocad LT. I have the Macbook connected to a 27" Cinema Display.
    If I boot up the Windows environment to use Autocad on just the Macbook Pro it takes about 1 minute. If connected to the Cinema display then it can take 5-7 mins. as well Autocad can be sluggish and slow to respond to commands.
    Can anyone tell me why and if this can be solved?

    If i had to guess, I would say prosessor stress is to blame.  When you are running a virtual machine, it borrows resources from the host to run the guest OS.  The CPU, however, is prioritized Host first, then guest second.  With a 27" display connected via Display Port. that is a larger strain on the processor.   Honestly, on my 23" iMac, I see a WORLD of difference between the speed of the host and the speed of the guest.  That is just something you live with on virtual machines, nothing compares to hardware.     I'm sorry I dont have a better answer, but that is all I have.

  • My name and/or password are not working on start up page. Got given used macbook pro and new to apple so please help!

    My brother gave me his macbook pro and I'm having trouble getting past the start up page that asks for my my name and password. I have an apple id and password but these don't work nor does me typing my actual name and the same password. I've rung apple twice and the first person said I had to reset my uusername account and told me I could do so by visiting the support part of the apple website using the link he gave me. The information tells me how to do this but I have to have the computer up and running to reset/change the account username and password. So no joy. Second time I spoke with a lady who told me the name and password should be the same as the one my brother used when he had the computer but having entered the name and password he gave me it still doesn't work. I've tried all the different name types of my name e.g. full name, no spaces, capitals and no capitals etc but every time I click on the right pointing arrow thing or press the enter button the password does a quiver/shake thing and nothing happens. My bro says he has a relatively new lion operating system. I haven't a clue what to do as I'm new to using apple computers and I've spent ages looking through the support section with no success in finding the solution. Any help/advise would be much appreciated. Ta

    Resetting User Password in Lion and Mountain Lion
    Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

Maybe you are looking for

  • How do I sync the music from my iPhone to iTunes on my mac?

    I got a new macbook and I can't sync the music from my iPhone to iTunes.. How do i do that?

  • Regarding dropdowns in Adobe forms

    Hi experts. I am trying to create an Adobe Form. I have 2 dropdown lists in there. Depending on the value selected in the 1st dropdown i want to populate data in 2nd dropdown list. Can i do this using javascript..If yes , how. Or is there any other a

  • How can i get login details to a table?

    i am using my sql data base.people who are visiing my web site can log in to the sites restricted areas using their Usernames and Passwords. (the login is based on the "Register" table in the data base) When somebody enteres the site using their User

  • Actionscript gets deleted on publish (or move)?

    Increasingly in the last few weeks, I've experienced a weird issue where I save or publish a copy of a file I'm working on, and then seemingly random bits of my actionscript are deleted. For example, on my original save, my Actions looked like this:

  • 10.5.4 and ARD 3.2

    Ever since I updated to 10.5.4, i am having a GANG of issues with ARD. Anyone else experiencing any problems?! A couple of quick examples: It's takes FOREVER to launch! When I try to "Observe" more than one computer, all I get is a blank grey screen