Anyone using Lync audio with Adobe Connect?

We are in talks to move from PGi integrated audio to the Lync Audio, but don't know where to start. Any pointers or info will be really appreciated. Never worked on SIP or UV in Adobe Connect environment.
Thanks in Advance.
Regards,
Amit

The dial in process would be exactly the same as if you were dialing into the bridge as a participant. Most of the time it needs the following steps.
Phone number:           800-555-5555
Delay:                        3000 ms
DTMF: (passcode)     123456#
Delay:                        3000ms
DTMF:                      1 or # (for a roll call or to join the bridge)
However if the provider is not using a SIP compliant bridge, the Universal Voice tool will fail upon attempting to dial out.
Also, for the hosted environment, the phone bridge must have a toll-free number.

Similar Messages

Does anyone use Optical Audio out to connect studio monitors?

I am planning to snatch a Mac Mini as my studio upgrade. I am also planning on buying some studio monitors (as opposed to just regular speakers). I was wondering what people use to get great, accurate results for under $600. The Mini can achieve optical audio out, apparently. Are there studio monitors that use digital, optical audio as a means to connect? How do fellow Logic home studio users have their audio out set up?

Scroto Saggins wrote:
well, optical is digital (right?), so wouldnt it be the only way to get the best, uncolored sound out of a Mac? what other (better) options are there? I started this topic because I dont really notice studio monitors that use optical, and I am wondering why? Whats the downside?
Because the ones that do, are way over the budget of most people on this forum.
I have this pair :
http://www.jblpro.com/catalog/General/Product.aspx?PId=28&MId=5
They retail at around 1500 per pair. They are not the most expensive ones out there, rather the less expensive ones with digital inputs.
Cheers

How do I export a Keynote 09 presentation to work with Adobe Connect??

Hi - I have imported the .MOV file from keynote into Flash and then exported it as a .FLV file but the problem is that all of my 'on click' build requests have disappeared so it just plays as one continuous movie. Can anyone help me please? It seems that a .MOV file (which works perfectly with the 'on click' features) cannot be played with Adobe Connect. I really need the presentation to play with all of the 'on click' settings in place. PLEASE HELP!!! :o)

Adobe Connect does not support Apple Keynote as a file format. Adobe Connect supports Microsoft Powerpoint format. When you use the Share Document Pod and upload a Powerpoint presentation that file gets converted on the fly to Adobe Flash format and then is streamed to attendees in the room. If you want to use Apple Keynote with Adobe Connect then you should use Share My Screen and use screen sharing to share exactly what you want without converting it into Flash. Adobe Connect does not support .MOV or Apple Quicktime formatted files today (release 8 and previous versions).

Which Premier Global (Premier NA) Audio product works with Adobe Connect Pro 7.5

I am trying to set up audio conferencing on my Adobe Connect Pro 7.5 so I am able to record a discussion online. So both myself and the participants on the call would be recorded. For my audio profiles, Premier Global (Premier NA) is set up as the participating provider. Which Premier Global audio account is used with Adobe Connect Pro 7.5 so an Adobe Connect session using teleconferencing can be recorded?

Any PGi phone bridge should work. Just be sure you start the audio conference in the meeting, or Connect will have no knowledge of the call.

Has anybody integrated Shoretel conferencing with Adobe Connect?

Has anyone integrated ShoreTel audio conferencing with Adobe Connect? If so, I would love some tips on how to do it.

James, I'm interested in this topic as well! I am not an IT person, just a user. I have Tech Support who are dealing with this. We have integrated our Shortel system 99.9% with Connect, but for some reason we can't get the DTMF to send properly. Very frustrating! Adobe has provided some assistance. Adobe wanted the SIP information (SIP IP adddress, username and password) which we set up; but my IT folks needed the correct ports that Connect wanted. This is what they sent me:
Below are the ports you
need to open to make FMG talk to your SIP server:
2222 - HTTP
8506 - RTMP
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5060, DST-IP=ANY, DST-PORT=5060
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=5060, DST-IP=<(>
<<)>Server-IP>, DST-PORT=5060
Flash Media Gateway to Internet   SRC-IP=<Server-IP>,
SRC-PORT=5000_TO_6000, DST-IP=ANY, DST-PORT=ANY_HIGH_END
Internet to Flash Media Gateway   SRC-IP=ANY, SRC-PORT=ANY_HIGH_END,
DST-IP=<Server-IP>, DST-PORT=5000_TO_6000
Maybe this will help?
Penny

Integrate robohelp with adobe connect and captivate

RH8 HTML.
Hi all,
Just wondering if anyone has done this, or if it can be done at all.
I've produced a load of documentation for our web application, now we are beiong tasked with going down the elearning route with online courses etc.
I just want to know if there is any useful integration between robohelp, adobe connect, and/or captivate in terms of sharing content etc.
Even linking within RH to start a connect session or something similar.
Thanks.

I haven't used Connect Pro but my understanding is that it is just a kind of portal into which you can placecontent that can be viewed over the web between disparate groups. Adding content to Connect Pro (e.g. a Captivate movie) should be easy to do. Once there, you'd just link to the URL from your RoboHelp project. You'd need to enter user logon details no doubt which makes me wonder whether this is the way forward for you. I'd have thought you could integrate your Captivate movies INSIDE your RoboHelp project and publish this to the web. That way you wouldn't need Connect Pro.
If it's of help we do just this, although in our case the movies are stored on our own internal server. We just link to them from the help so they open in a separate window.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Need help on how to use conference facility within adobe connect

I need some help on how to use conference facility within adobe connect?

I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community

Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters?

I recently tried to install Adobe CMM, as a pop-up window suggested after I installed Photoshop CS5 on a new computer, running Win7x64 Ultimate. Before trying to install CMM, my Akvis Sketch Plug-In for Photoshop worked fine. Afterwards, Akvis Sketch runs under the filters menu, but will not accept mouse clicks from my Wacom tablet. Prior to Adobe CMM, all was fine. Somehow, the frustrating attempt to use Adobe CMM broke links to Akvis Sketch.
By the way, Adobe CMM setup tried to run and vanished without a trace - no indication of success or failure. CMM doesn't show on my control panel as installed software, so I can't de-install it.
I did un-install Akvis Sketch and re-install it. No luck as a filter, nor as a stand-alone program.
Additional point of interest - a second identical software/hardware workstation continues to run Akvis Sketch just fine because we didn't try installing Adobe CMM on that machine. It certainly looks like CMM is the culprit here.
Since Akvis Sketch is broken as a stand-alone, I doubt that de-activating, uninstalling and then re-installing, re-activating Photoshop CS5 will help, but it will take a lot of time to recreate actions and re-install other add-ins, plus preferences settings.
Has anyone else encountered problems with Adobe CMM clobbering Photoshop add-in filters, and have you found a work-around?

Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

High quality mic on external usb-soundcard dosen't work with Adobe Connect. Why?

Hello
A friend of mine bought a quite good microphone and a good extrernal soundcard for recording podcasts. Everything works fine. But know she wants to use the microphone for Adobe Connect, because of the very good sound quality. Adobe Connect finds it an you can select it, but now singal comes into Adobe Connect. But it works with every other Adobe application. So why doesn't it work with Adobe Connect?
The soundcard is the Tascam US-122 Mk2. Normaly very uncomplicated ..
Thanks for any advice!
Alinja

I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

May I use MSI FX5900XT with Adobe Premier 1.5 to capture analogic video?

Hi Folks,
Does anyone know if it is possible to use MSI FX5900XT with Adobe Premier 1.5 capturing video ?
I am trying to use this software to capture video and I see that Premier does not recognize it. I can normally capture with Virtual VCR or VirtualDub.
Is there any plug in or driver to permit Premiere recognize the MSI FX5900XT ?
Regards,
Mario Rodrigues

In the Adobe site there is no mention about Nvidia Cards.
I think it is stranger because the capture with Nvidia Cards are becoming very common nowadays.
I would like to know if someone has tried to capture with Adobe Premier using MSI FX5900XT.
Mario

I had a recent not so great experience with Adobe Connect

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

Using iPhoto 09 with Adobe CS4

Hi,
I am trying to use iPhoto 09 with Adobe CS4.
I have Adobe as the default external editor and when I click on edit file, it opens the file in CS4. The problem is when I save the file, the changes are not reflected in the image and don't show up in iPhoto.
I found this:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
But that doesn't work for me. The original file just shows up again. Any ideas?
Thanks..

Welcome to the Apple Discussions. The following will help you use PS with iPhoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

Anyone using iMovie 6 with OS 10.5.3

Anyone using iMovie 6 with OS 10.5.3
I am now using iMovie 06 and iDVD 08 with OS 10.5.2 on a MacPro (working fine).
I would like to here from a 10.5.3 user before getting 10.5.3
Thanks.

thanks Bengt.
I've never done video editing so this is new to me. was surprised at how easy it was with the test video, in this case, being a "flipvideo camcorder" the first step is taking the video clips and then making them into a movie - hence the need for imovie 6.
I will have to now actually read the instructions for doing the next step of editing. initially just wanted to see if it worked with the FLIP cam. now I can have fun learning something totally new.
first think I'm going to do is check what format iMovie6 saves the movie in. the clips are AVI. The tech said they could be saved to another format, but haven't gotten that far yet.
thanks
Sue

Anyone use cfdocument tag with a cfloop

Anyone use <cfdocument> tag with a <cfloop>
I am trying to generate multiple documents like this -
<cfloop query="myquery">
   <cfdocument type=pdf>
        <html>...html code here...<html>
</cfdocument>
</cfloop>
But only the first document is generated in the browser?
my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
thanks in advance

my requirement i wnat to create multiple PDF and upload in to folder then zip folder so user can able to download ZIP file
1) Create a folder named, say, docsDir, in the currect directory.
2) Create the PDFs, using Eddie Lotter's suggestion, naming each file dynamically, and storing each in the folder docsDir.
<cfloop query="myquery">
    
   <cfset filename='doc' & myquery.currentRow & '.pdf'>
   <cfdocument format="pdf" filename="#expandPath('docsDir\#filename#')#" overwrite="true">
        <html> Code to generate content of <cfoutput>#filename#</cfoutput> goes here. </html>
</cfdocument>
</cfloop>
3) Zip the folder, docsDir, storing the resulting file, docsDir.zip, in the current directory.
<cfzip action="zip" file="#expandPath('.')#/docsDir.zip"   source="#expandPath('docsDir')#">

Anyone using Database 11g with UCM?

Anyone using Database 11g with UCM? Can't find anything on the customer reference site. Customer wants to be reassured that they are not the first, etc...
Thx.
ft

I know of a few companies that are using 11g ;)
They wont be the first.

Anyone using Lync audio with Adobe Connect?

Similar Messages

Maybe you are looking for