Anyone using Select Enterprise for Forte?

Subject says it all. We're contemplating using eith Select or Rational
Rose.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Raymond captured my thoughts exactly. We were Select customers too and glad
to be Rational customers now.
-Martin
Raymond Blum <[email protected]> on 03/04/99 11:30:56 PM
Please respond to Raymond Blum <[email protected]>
Reom
To: [email protected], [email protected],
[email protected], [email protected]
cc:
Subject: RE: Anyone using Select Enterprise for Forte?
We were Select customers for a year and have switched to Rose. Select was
both a buggy tool and a buggier company! Their upgrade to V6 completely
changed the server requirements, pulling the rug out from under our feet.
Features we were promised were not in the releases we were sent...
Rose has been a godsend; the product has it's shortcomings but it is a level
above Select in both functionality & robustness.
The 3 times I've had to contact Rational tech support, they've been able to
provide me with a solution. Select's tech support were unable to get their own
product to work as advertised. ---Raymond
We have been using Select for over 2 years but have kept a watchful eye on
Rationals offering.
They seem to leap frog each other and have various pros and cons. My
personal bias is currently towards Rational Rose but you'll have to choose
based upon your own needs.
If you let me know what you need I can let you know what I think each tool
offers.
Cheers,
Jez
Jez Sygrove
Application Architect
PanCredit
PS* Standard disclaimer: The opinions I express are not necessarily those of
my employer.
From: Robinson, Richard[SMTP:[email protected]]
Reply To: Robinson, Richard
Sent: 03 March 1999 18:29
To: '[email protected]'
Subject: Anyone using Select Enterprise for Forte?
Subject says it all. We're contemplating using eith Select or RationalRose.
Thanks in advance-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Sent from my PalmPilot.
The best thing since the Mac Plus!
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

Anyone used BAPI/FM for LT03 create transfer order

Hi all,
Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
thanks,
Subba

thanks Amit....
But it would be helpful to know the usage of this FM....and if anyone has used in their program....
thanks,
Subba

Anyone using Photoshop Elements for Fashion Design

Hi,
I'm looking for software to help me in the Fashion Design Industry. I want to use it for my sketches. I am a beginner when it comes to Fashion Design and have no experience using Photoshop software. I had read somewhere that Photoshop Elements is a less expensive version of Photoshop. I read that it does 90% of what Photoshop does without the higher end pre -press printing capabilities. I also read that there is a book that will help you with the other 10% to achieve the full Photoshop capabilities.
1a. I would like to know is anyone using Photoshop Elements for Fashion Design?
1b. If yes, please explain in details what exactly are you using it for?
2a. Is there more than one version of Photoshop Elements?
2b. If so, what version do you recommend?
3. How easy is it to use?
4. Do you know of any books you can recommend that will help me with using the software for fashion design?
5. If you don't feel Photoshop Elements is the best choice, then what other software would you recommend?
Thanks

I've never used PSE for fashion design, but there is only one flavor of elements, not a variety of different versions. I would wonder about using it for this because it could make a lot of difference if you need to create output in CMYK form (for print) or to softproof (neither of which is available in PSE). You also can't create composite layers in Elements.
I like Elements a lot, but I would not say it's 90% of Photoshop, more like 70% and I would expect that people would use Illustrator rather than PS for most things to do with creating illustrations. Also, there is no book that can make PSE into PS, although you can extend what it can do, but Adobe has deliberately crippled certain features in PSE.
I would say we need to know what you need a program to do to be able to give you any useful kind of advice. If you need to be able to draw vectors and paths, PSE is not a good choice. If you just need to sketch, it's fine.

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon.

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon. Does it work and is it reliable?

This post by Karsten shows several of the major alternatives, including a free one.
I have no experiece good or bad with the one you mention.
https://discussions.apple.com/docs/DOC-3711

Using (Select All) for report parameter

Hi there,
I am Looking for assistance in making the the (Select All) option work for a particular report. The parameter is for product families (which there are about 47 unique results for). The report is also influenced by two other parameters, one being a date type
i.e 'MTD' 'YTD' 'MAT'. When a long date type such as MAT is selected, selecting all families causes the report to get stuck in an endless loop.
I've tried creating my own <Select All'> item in the parameter dataset, then I have the opposite issue, the <Select All> selection works perfectly but when I try and tick two or more product families I recieve the following error:
"An expressions of non-boolean type specified in a context where a condition is expected, near ',' "
Parameter Dataset:
SELECT '<Select All>' AS family_description, '<Select All>' AS family_code
UNION ALL
SELECT DISTINCT family_description, family_code
FROM dim_item AS item
ORDER BY family_description
Snippet From Main Report Dataset:
Where
sales.oe_branch_code IN (@Branch)
And
sales.order_status <> 'X' and sales.line_status <> 'X'
AND (item.family_code IN (@Family) OR @Family = '<Select All>')
Any help is appreciated
Thanks Kindly
SQL Novice

Hi KCBA,
I have check the query you have provided the issue cause by the query "
AND (item.family_code
IN (@Family)
OR @Family =
'<Select All>')" you are using which is incorrect.
If the parameter @Family have set as "Allow multiple values" then you don't need to add new label "Select All" for the multiple value parameter already have this section, if the parameter @Family is not the multiple values
parameter and you want to select all the values or just select one, you can modify the query as below which will works fine:
"AND (item.family_code =
(@Family) OR
@Family = '<Select All>'
If you are using the stored procedure and have issue about add multiple value parameter in the where clause, you are take reference to below similar case about how to create an function to make it work:
Passing multi-value parameter in stored procedure ssrs
If I have some misunderstanding, please try to provide more details information about the relationship of all the parameters (Cascading or not ), current result you have got and expect result you want(Snapshot).
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Using select event for interlayer navigation

Hi All,
              I have two tables. The output of first table is input for the second one. When I select a row in the first table,the SELECT event is fired and the second table is populated based on the selection.
             Now I have a scenario where the two tables are on separate layers. My requirement is that, the secondlayer should be brought in when the SELECT event is fired. I don't want to use a button to trigger a navigation event. I try naming the navigation event as SELECT but it didn't work.
     please help

Hi Jarrod,
          Yes your view i sright. But i had mistakingly mentioned a table. Its Bar chart actually. When a bar is clicked, second layer should appear with the detail table ouput.
      Though the table is filled with the click but the navigation is not happeneing. Do you have any idea abouit it ?
I have used *select also but to no avail

Does anyone use Framwork POs for WBS and Asset management.

We have had issues before with trying to use Framework POs for Assets. I wanted to know, does anyone out there use the Framework PO for the creation of Assets with charges going to WBS elements? Do you track service charges as well as material charges that are purchsed for Assets?

For PO, WBS, Asset frame work below is the sample
Create WBS which manage AUC
Example you will create a clinic,
Create Project - [Project Clinic]
Create WBS under the Project Clinic - [Clinic Expense]
Create AUC under WBS Clinic Expense - [Clinic under Construction]
Let say you purchase Paint for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 1000 USD)
Let say you purchase Wood for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 2000 USD)
During month end you can settle the amount to AUC (tcocde CJ88 - Settlement type - Automatic)
All charges to WBS will go to AUC
Once construction of clinic is finished and is ready to use, you need to settle all the amount from WBS to AUC (through settlement)
Then create Fixed Asset [Clinic Building]
Then settele the AUC [Clinic under Construction] charges to Fixed Asset [Clinic Building] through CJ88 settlement type - Final settlement
Thanks!
Jhero

Anyone using a mini for video playback ?

has anyone had any luck running DV from the mac mini ?
I know Gallery has a virtual VTR,
Thank,
Paul

A strange thing happened. When using Snow Leopard, I opened the desktop folder for the Leopard volume in icon view and moved some of the icons around.
Then when I rebooted into Leopard the display problem didn't happen (although there was still some weirdness with the blue screen being chopped up during bootup). I found all the icons on my Leopard desktop were de-arranged. I started manually rearranging them and then did "Clean Up Selection" on some, and the display problem suddenly occurred.
So this is looking like it might be something to do with the DS_Store file. My theory:
1. Snow Leopard does something to the video ROM that either:
— A. requires some new DS_Store format, or
— B. is just buggy with certain complex DS_Store data (note that I have ~100 icons on the Leopard desktop, carefully arranged and colored)
2. When I rearranged the icons in Snow Leopard, this either:
— A. wrote a Snow Leopard-style DS_Store file for the Leopard desktop, or
— B. just wrote a simpler DS_Store file that didn't have the problem complex data
3. Then back in Leopard when I fiddled with the icons, this wrote a new DS_Store file (either older Leopard format, or just more complex)
4. The video card was still in "Snow Leopard mode" at this point as I hadn't rebooted Leopard a second time, so the desktop display went distorted as soon as the new DS_Store file went into effect.
5. For some reason Leopard will write over the bad/new settings Snow Leopard writes to the video ROM, but only on the second restart.

Anyone using office 2004 for mac,please help!

Dear all,
i know this is probably the wrong place for this post,but i've always been able to find my answers here..so genuine apologies in advance
i bought office 2004 for my macbook a few months back..i'm able to open word,excel etc no problems...but when i am typing in word on a regular document..my spellcheck does not work..even where there is obvious spelling problems,it does not highlight it with a red line underneath...when i run a spell chenck,it tells me its complete and the spelling and grammer are complete,when they are obviously not!!
in the compatibilty report it tells me that that word cannot identify text language...when i select language dialog box and english (uk)nothing changes
I've also just realised that when i type in a word notebook document,spell check works!?!??!
Anyone any ideas,i have a dissertation due for college in a few days and i need it to work!!!
again apologies if this is out of order posting here,
regards,
Paul

how do i uninstall office completely???
Before you do an uninstall you may want to test your preference files for corruption. There are three which can become corrupeted, but probably only the first two will be of issue.
Quit Word and any other Office Applciations.
Browse to your User home account and locate the following files:
~/Library/Preferences/Microsoft/com.microsoft.Word.prefs.plist
~/Library/Preferences/Microsoft/com.microsoft.Office.prefs.plist
(the third has to do with fonts and I don't think that is at issue)
Drag these to your desktop and relaunch Word. Word will re-create these files.
If all works as it should you can trash these files. You will probably have to reset some preferences and Autocorrect settings. Be careful of what you reset as that may have been the cause of the issue.
If this does not work you may replace the newly created files with the ones you dragged to the desktop, or you may try re-installing Office.
If you want to completely remove Office and attempt a re-install to see if it corrects the problem: The uninstaller is located in HD/Applications/Microsoft Office 2004/Additional Tools/Remove Office.
I understand that you are in a timecrunch with your paper being due. I am sure with enough troubleshooting that you can and will find a solution to the Office problem. If the above steps do not work, however, you may also want to have a look at the free NeoOffice suite to get your paper done in the meantime.
http://www.neooffice.org/neojava/en/index.php
I am not including the link as a means of trying to pawn off the problem as I think any problem is ultimately fixable, but it may give you an option to meeting your deadline.

How to use select statement for one field

I want to fetch the data from table and only one field , the below code i written is correct or not , because only for one field i used endselct if i am not giving endselect it is showing error. Please suggest me.
DATA : SBELN TYPE VBAK-VBELN.
parameters : s_vbeln type vbak-vbeln.
select vbeln from vbak into sbeln
where vbeln = P_VBELN.
endselect.

Hi ,
As because you want single field but not single record so SELECT SINGLE is not correct .
You need to create a internal table with the field of VBELN.
Then you need to fetch the records from the VBELN field of table VBAK.
Try this code --
DATA : t_itab like table of VBAK-VBELN.
parameters : s_vbeln type vbak-vbeln.
select vbeln from vbak into table t_itab
where vbeln = s_VBELN.
Regards
Pinaki

Anyone using cfselect bind for 3 related fields?

I have a form that a user needs to select the office from
which will then populate the activity fields in the next drop down
box and then he will pick the activity which would select the
various dates that activity is run on. He would then pick from the
date in the third box and submit. Unfortunatly, I'm only able to
get 2 of the cfselect tags to bind correctly. Or if I could display
two items in one box that would be a good workaround but that fails
also. I've looked all over the livedocs and forums and haven't
found using 3 or more. The error I get when I run the code with 3
on the page is "Error invoking CFC /cmpts.cfc: Error executing
database query." and also "Error invoking CFC/cmpts.cfc: The org_ID
argument passed to the getCategoryArg function is not of type
numeric." -It is numeric but I tried changing it anyway to "array",
and "any" but then the error message reads "not of type array". If
I comment out the last one it runs fine or if I comment out the
first one (I'm removing the arguments passed in the cmpts.cfc code
as well) and this runs fine. Below is my code. (Oh and even though
the return value is data for all three in the cfc- using the same
name works for 2 and I copied this straight from the livedocs so I
didn't think that was the issue)
Any suggestions? Thanks, Wendy
<cfform name="test" method="POST"
action="dumptest.cfm">
<cfselect name="officeId"
bind="cfc:cmpts.getOffices()"
display="shortname"
value="org_id"
bindonload="true" />

<cfselect name="Activity"
bind="cfc:cmpts.getCategoryArg({officeId})"
display="title"
value="id"
/>

<cfselect name="date"
bind="cfc:cmpts.getdate({Activity})"
display="date"
value="date" />
<input type="Submit" value="Submit">
</cfform>

<cfcomponent>
<cffunction name="getOffices" access="remote"
returntype="query" hint="Get's the Officename and id">
<cfset var data="">
<cfquery datasource="dsn1" name="data">
select org_id,shortname
from all_offices
Where org_id <> ''
order by shortname
</cfquery>
<cfreturn data>
</cffunction>
<cffunction name="getCategoryArg" access="remote"
returntype="query" hint="Get's the category titles">
<cfargument name="org_id" type="numeric"
required="Yes">
<cfset var data="">
<cfquery datasource="dsn" name="data">
Select a.id,a.title,b.org_id,convert(varchar,b.date,101) AS
date
from km_activities a,km_work b
Where b.org_id= '#trim(ARGUMENTS.org_id)#'
and a.id =b.act_id
Order by a.id
</cfquery>
<cfreturn data>
</cffunction>
<cffunction name="getdate" access="remote"
returntype="query" hint="Get date of activities to update">
<cfargument name="id" type="any" required="Yes">
<cfset var data="">
<cfquery datasource="dsn" name="data">
Select convert(varchar,date,101) AS date,office_id,act_id
from km_work
Where act_id = '#trim(ARGUMENTS.id)#'
Order by date
</cfquery>
<cfreturn data>
</cffunction>
</cfcomponent>

Hello
This file is created when a folder or project is downloaded from the Dimensions Server using JDeveloper. If you create a dimensions connection and then using the versioning navigator (View -> Team -> Version Navigator) open the connection and navigate to the folder you want to work on. Select the folder and use the context menu "Download" to download the folder.
Dave

Is anyone using iMovie 08 for editing footage from a Canon 5D Mark 11?

I'm interested to converse with anyone that is using iMovie 08 to edit Movie files from the Canon 5D Mark 11.

HI Stephen,
I have iMovie 09 on order hoping that it would alleviate this issue - sounds like it does not. Similarly to you, my footage imports fine, but the application crashes when the curser is moving over the video. I am lead to believe that iMovie just cannot cope with the high resolution of the 5D Mark 11.
I have tried the same files on other Macs and the same issue occurs, so it is not my machine or software issues on my machine. All of my software is up to date - except for Quicktime. I am running 7.5.5, so don't bother trying to roll back from 7.6 because it will not help.
I have also tried the footage on Final Cut Express and it crashes that application as well. I understand the Final Cut Pro can work with the files. At this stage I presume that Canon 5D mark11 users cannot edit footage on iMovie or FCE and possibly some other applications.
Let us hope and pray that Apple and Canon can sort this out!
Scott

Anyone used 'DVD DECRYPTOR' for ipod?

does anyone know how tho use dvd decryptor to sync video files.

Well Ive only used DVD Decrypter to extract movies from the DVDs I own...then I use Videora iPod converter to convert them to the proper format ( mp4 ) and then transfer them to the ipod using iTunes...
Heres where I learned
http://psp.turbosweet.com/files/tutorials/dvd_topsp/dvdpsp.htm
Watch this for only the DVD decrypter part...then get VIDEORA iPod COnverter
www.videora.com

Anyone using Peoplesoft Enterprise Learning (LMS)?

Hi everyone,
My organization is currently considering Peoplesoft Enterprise Learning Management (aka Peoplesoft LMS). Could anyone who has used/currently uses it please share their experiences with me?
Any feedback on PS LMS would be appreciated - and it would be great to a demo if possible.
Thanks,
Eric Benson
e-Learning Business Analyst

Having our own LMS, we do not use the Peoplesoft one, but we have a client that I'm pretty sure does. They've referred to it as the Peoplesoft LMS and the Oracle LMS...but pretty sure it's one in the same (as Oracle bought Peoplesoft months ago, right?)
The biggest issue we've heard about it is no Interaction-level tracking support. Now I don't know what version they have but not being able to track interaction data was a big disappointment to them. They hired a contractor to customize and add such functionality and it works, mostly, but has some flaws...and, of course, if they ever update their LMS, likely that customization will be blown away.
Otherwise, the only other complaint I heard was the cost and time of integration with their other systems (whatever those may be - HR and such, I imagine). It wasn't cheap or quick.
I'd like to balance this out but I've not heard any positive comments on it, other than it does integrate with their HR system.
Erik

TS3276 PostBox and iCloud - does anyone use pop mail for postbox and icloud? i can't seem to use my MAC pop mail with postbox.

Apple policy of reseting each time you forget an Account ID or Password makes it impossible for me to keep track of my many accounts on Mail. I decided to use PostBox and it's working great except for one account. That account is linked to icloud. I'm not too happy with icloud, in general, but I do want to be able to track my mail on my iphone for that one account (my business account). It used to be that I could use 2 accounts with one - using an alias. Now, I can't do that with icloud, nor can I get it linked to PostBox. Does anyone know what I should do? Am I asking the wrong questions?

I am now on Chapter 3 & 4 - Since this is the ONLY message board I can get into,
& Roger, No, I never had a "mobile me account", if that's a cell phone - wouldn't own one! - IF it was from the Old Tiger mail Ap, I do believe it was discontinued, when they came out with Snow Lion, no? So that's defunct. FYI I got my first computer in 1991 - DOS, good stuff, easy to fix. My first mac in 2006 Tiger, great stuff, loved it. Then Snowleopard, not sure when, maybe '09? it was just before Lion came out, didn't know the new one would come so soon. & in June 2012, first mac crashed, lost a year "unsaved" data.
Q # 1. I can't get into My Account - to get into support & any questions! Somehow all my data is messed up, & I've had to change passwords 3 times today every time I'm "rejected" by my account. I seem to have 3 accounts now, each with a different name Password, & Security Questions! & I've been rejected due to: "Incorrect ID name", "Incorrect Password" & because whatever - doesn't" recognize my birth date" / or "my Security question answers" that I chose - all of which I know are correct. AGUH!
My latest problems:
1) Can you Unzip iPhotos, uploaded from a USB or External Drive (after my SL crashed)? The dpi for these old ones is about 250 x 360 (88 KB) compared to 2448 x 3264 (2.6 MB) for recent ones.
- Do you need a program to do this? Some say there's a "free" program, any good? Can unzip be done to many or 1 at a time? Or is there something I haven't found in iPhoto '11, 9.2.1 (Lion)?
[I now buy new Camera Memory cards & don't delete the photos anymore, since I lost so many.]
2) Can I combine all 3 of my Apple ID info - or at least delete that 4 year old Email address in my profile? (IF I can ever get in. I wrote a "suggestion" to the Apple folks, who said my new Email was on it, & they'd send me an email - but I never got it, guess it went to the old one?

Anyone using Select Enterprise for Forte?

Similar Messages

Maybe you are looking for