Anyone using source control AND cloud sharing?

Hi. I'm curious if anyone has any experience or tips to share about a RoboHelp environment that uses BOTH source control and cloud sharing.
My company uses perforce. I'm purchasing a couple copies of TCS5, one for me in California, one for writer colleague in Europe. I'd like to use Perforce for version control/backup, but use Dropbox for RH asset sharing and sync. Is this workabout? I'm guessing that the Dropbox/sync mechnism won't work if one or both of us has not checked out a file that needs to be (automatically via sync) updated. ("Not checked out" = file is in read only state.)
If RH automatically checks files in/out of perforce in order to complete a cloudshare sync, that would be most cool!
Thanks in advance for your ideas!
-Kurt

Hi Kurt
Have you tried the scenario with RH 11?
It should automatically check-out the file or should prompt for it based on the settings Tools -> Options -> Version Control
I tried with Robo Source Control and SharePoint. And it is working for me. Check-in has to be done mannually.
Please try and let us know the result.
Thanks

Similar Messages

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Visual Studio 2013 slows down + crashes when using Source Control features.

I have spent two full days trying to resolve this issue but no luck so here we go,
I have created a project using Visual Studio Team Foundation Server plug-in in the past. Later on I switched to
Microsoft Git Provider.
Now when I connect to that project in the Team Explorer and double click on the solution to work on it locally it somehow changes the plug in to Microsoft Git Provider automatically and of course I can't
Commit/Commit and Push since I receive following error in the Team Explorer,
An error occurred. Detailed message: Failed to open directory 'C:/Users/.../AppData/Local/Application Data/'
Manually changing the plug-in to the Visual Studio Team Foundation Server
results in a broken Team Explorer as below,
With Settings leading to an empty pane, and also a warning in the Team Explorer's Changes page telling me the message below if I click on Pending Changes...
Microsoft Git Provider is not the current Source Control plug-in. Change Plug-in
And manually selecting the solution from Solution Explorer, right click and
Add Solution to Source Control, leads to never ending hour glass and (Not responding) visual studio.
New Projects
Creating a new project is straight forward, unless I "Add to Source Control" is checked. If so, again never ending process if Microsoft TFS plug-in is selected in the tools and eventually me Ending the Visual Studio task. And a VERY long process
(40+ mins) if I have chosen Microsoft Git but that finishes successfully rather.
New TFS project from Team Explorer
If I create a new project in my Online Web Studio
Click on Open with Visual Studio Link => Opens and connects to a my newly created TFS in team explorer.
Clicking new in Team Explorer under Solutions to create a new solution and bind it to this Repo
leads to straight crash of Visual Studio and restarting attempt of VS.
So I really can't use Source Control from visual studio other than cloning GitHub's existing repo's on Visual Studio and Committing my current Microsoft Git managed projects.
I have attempted
Repairing Visual Studio (no luck in results)
Devenv.exe /setup (no luck)
Trying to scrap the SCC info on my solution then at least it won't get picked up by source control then I can Check it in as a new project. (no luck and the solution picks the Microsoft Git upon opening it by clicking on the .sln file.) I have followed
these steps in this stack overflow answer.
And lots of mucking around like removing my workspaces almost Thousand times and putting them back, binding and etc.
I am really stuck on this and it's holding me back from staring a new project (which is problematic using Adding to Source Control) and unfortunately is dependent on the old project (which is developed under Visual Studio Team Foundation Server Plug-in which
is throwing tantrums)
Would like to hear you pro-s input on this
Using
Visual Studio 2013 Community edition (recently switched from Pro to Express to Community)
Windows 7 (64-bit)
Git tools
Git windows installation
Nuget Package manager
Visual Studio Log File
http://filesave.me/file/50620/log-txt.html
Mehradzie

Hi Mehradzie,
Based on the description, seems you're working with Git team project in Visual Studio Online(formerly Team Foundation Service). I'd like to know whether you mean Visual Studio Git command tool as the plug-in, and if you're trying to create solutions/projects
with Visual Studio and add them to the created Git team project.
From the screenshot, you're not connect to the Git team project by using Team Explorer. To work with Git team project locally, you can follow the instructions as below:
Connect to Git team project by using Team Explorer, after that you might install Git tools if you connect to the team project for the first time
Clone the remote Git repository to a local git repository and set the path to local git repository
Create a solution and select Git source control, also saved to the local path of the local git repository
Select your branch, and then click "Changes" and Commit the changes
Click "unsynced commits" and push the commit to remote git repository
You can also refer to the links below for more information about getting started with Git in Visual Studio Online.
http://www.visualstudio.com/en-us/get-started/share-your-code-in-git-vs.aspx
http://blogs.msdn.com/b/visualstudioalm/archive/2013/01/30/getting-started-with-git-in-visual-studio-and-team-foundation-service.aspx
If you still have any other concerns, please elaborate more details about your scenario. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Has anyone used Grid Control to implement DataGuard?

Has anyone used Grid Control to implement DataGuard?

Hi,
You are right, without the B&K software there is not much I can load. However this is usefull information. The VIs that you have are a wraper for the calls to the ActiveX pulse control. If those VIs do not provide the functionality for the Intensity Module there are 2 options:
+The developer did not develop VIs for the module
+The Pulse ActiveX control does not exposes the functionality of the Intensity Module.
To find this out, you can create a new VI that opens a reference to the Pulse ActiveX object and start looking for some property that gives you a reference to the Sound Intensity Module, or a a function that allows you to run any methods from the module. There are a bunch of examples that ship with LabVIEW on calling Ac
tiveX modules.
You can also try to get the documentation for the ActiveX interface for Pulse to find out whether the Module is exported or not.
There is also the option to use Native LabVIEW functions for the Sound Intensuty measurements; the Sound and Vibration Toolset can take sound intensity measurements that are compliant with industry standards.
Let me know how this goes.
Regards,
Juan Carlos

Anyone use hypersonic 2 and logic express 9?

anyone use hypersonic 2 and logic express 9?
Message was edited by: Kajun Muzik

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

How to Use calender control in cloud buissnes app in visual studio 2013

Hi all,
I have a task to use calender control in cloud business app in visual studio2013 how to use
so please let me know if any one knows.to solve issue
Thanking you,
ArunDarly

Hi,
We can use jQCalendarPart or other jQuery calendar control in SharePoint app.
The following link for your reference:
http://jqcalendarpart.codeplex.com/
Best Regards,
Dennis Guo
TechNet Community Support

Has anyone using a PowerMac and Tiger got a Phaser 8570?

Has anyone using a PowerMac and Tiger got a Phaser 8570?
There are drivers for IntelMac 10.5 and 10.6, but nothing for PowerMacs.
I was thinking of upgrading from our 8550 - if there's a driver that will do - anyone able to help?

Additional information.
Had some problems with the 8550 and decided to take up a Xerox trade-in offer.
The ColorQube 8570 not only works perfectly with Tiger, it's a lot faster and quieter than the 8550.
Which answers the question.

Anyone using Login Pro and PowerCore Firewire

I have a G5 dual 2 gig with 4 gigs or RAM, 2 x 160 LaCie HD, RME Firewire 800 and PowerCore Firewire. I have been having issues with PowerCore losing connection, plug-ins load and are disabled, and total system lockups.
For testing, I removed all audio IO drives and used internal audio, remove all midi drives and I am still having the same issues. Anyone using Login Pro and ProwerCore Firewire successfully?

I am on the same machine as you. Most of my problems (similar to what you report) have been due to the driver/software of the Powercore. Luckily for you, TC doesn't have phone support, so you can be spared the immediate relief you don't want and wait the 48 hours for a general email response that says you get to wait another 48 hours until someone gets back to you.
That said, Powercore FW works fine for me. It sounds like you are using a lot of FW devices, which might also contribute to your problem. I've found that you can actually overtax the FW ports on G5's to the point where they stop working properly, causing random connection loss.
Does the powercore connect through any other device?
Trying unplugging your LaCie's and see if that helps.

Which infocube should I use for Controlling and Inventory?

Hi all,
I have several questions regarding Controlling and Supply chain management infocubes:
1. We need cost reports for the material ledger in order to meet the Brazilian compliance. I have found two infocubes:
CO-PC: Cost Object Controlling (0PC_C01)
CO-PC: Actual Costing / Material Ledger Costs (0COPC_C02)
What Infocube will help me to create a query that will meet our requirements? Which one is better?
2. We need a cost Center summary report, Expenses analysis, by product, cost center, business unit, region, plant, etc. and Expenses period comparison report. Which infocube will provide me that information for those reports, the CO-OM-CCA: Statistical Key Figures (0CCA_C03) or CO-OM-CCA: Costs and Allocations (0CCA_C11)?
3. What infocube will be needed to generate an inventory report (raw material, semi and finished goods)? Is it the Material Stocks/Movements (as of 3.0B) 0IC_C03?
Can I get an inventory report from the Purchasing data (0PUR_C01) infocube?
Thanks a lot
Vic

Hi
1)you need to check the requiered characteristics are available or not from these data sources which supply data to the above said cubes,,2
2)0CCA_C11
3)0IC_C03
You cann't get the inventory report from the purchasing data(purchasing data always talks about the vendor supplying inventory,it never talks about the production inventory)
Hope it helps
Thanks
Teja

Parallel use remote control and touch panel.

Hi.
Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
Thank's.

Hi
No. When a codec is paired with a Touch controller it is not possible to use the remote control.
You question number 677 in link bellow
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
br Oleksandr

I want to use iChat video and file sharing with Windows users

Nowadays, iChat is compatible with AOL/AIM, Google Talk, Jabber, Mac.com and MobileMe instant messaging services. I know that Yahoo Messenger support will be available soon in Mac OS X Lion.
I tried using AOL/AIM and Google Talk natively in iChat in order to talk with Windows users which were using Google Talk application or web chatting (Me from: Google Talk - My friends from: Google Talk, and Me from: AOL/AIM - My friends from: Google Talk), but videoconference and file sharing were not available.
I also tried Windows Live Messenger in iChat via Jabber intermediate, but it is not efficient and doesn't work for videoconference and file sharing.
So, which IM service combination I should use to chat with Windows users in order to be able to use videoconference and file sharing using such a great app like iChat?
Thanks you.

Hi,
A lapsed Trial or lapsed Paid for MobileMe account will not work in any fashion, as a Screen Name in iChat/AIM apps or as a Email. (Of course it is no longer an Valid Apple ID either).
Given that Google is a Jabber server iChat will Video (or Audio Only) Chat Jabber to Jabber.
With a Valid AIM name (AIM, MobileMe or @mac.com) then it is supposed to work to AIM on a PC
This tends to vary from person to person as to success.
From AIM version 6.5 AIM introduced a Send as Typing feature called "Real Time"
It does not work to iChat and in fact also has to be turned Off in the Buddy List at the AIM end for Video or Audio chats to work.
The AIM app also has to be allowed through the Windows Firewall as an Exception, preferably with UPnP enabled as well and UPnP enabled in their Router.
Trillian is a paid for App for PCs that provide an alternative.
Recently theri site offered 3 windows versions
The Pro version of verion 3.2 (known to work), a version 4 and a version 5 in beta. The version 3.2 used to have a free Text chat version and only the Pro version was needed to Video.
Until the site was reorganised the 3.2 version was "On Sale" at a reduced price.
It seems version 5 is now out of beta
They are still separating out a Pro version.
It is a multi-service client
There is also a Mac version although I have not tried it.
I am not sure what you mean by "Manage" your MSN Contacts.
How about using a MobileMe expired account screen name for using iChat with Windows-Google Talk users? Should I expect the same incompatibilities?
I have already addressed part of this. The fact the name will not work full stop.
However one way of reading this is that you are thing of linking AIM and Jabber (Google) Buddies in one Buddy List
Directly in iChat this cannot be done - unless you are the one with the Jabber Account and an AIM Transport set up.
You would be subject to the same Text Chat only restrictions.
It is a bit like the fact your phone line can be used for Fax, Telephone and DSL broadband. (in fact mine does TV as well)
You granny would not be able to talk to your Fax machine if that happened to answer the call.
Her Fax machine might be able to communicate with your computer if you had an active Fax app on there, and a dail-up modem active to answer.
10:06 PM Tuesday; May 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Has anyone used Firefox Sync and Xmarks at the same time?

Firefox is my primary desktop browser. On my desktops, I use Xmarks because I use Firefox, IE and Chrome. It enables me to keep my bookmarks synced across browsers as well as use home/work profiles, etc. However, I'd like to use Firefox Sync so I can sync the bookmarks to my smartphone. Has anyone successfully tried this? I thought I'd ask before trying it myself just in case. Thanks!

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

When will we be able to rate music using voice control and Siri?

It's pretty cool to be able to control the music app using voice control, but we really need to be able to rate songs too. I mean I can do everything else I need to do with my music with the voice control, except rate music, and always rate every song when I listen to it. Then, once they're all rated, I create a smart playlist with my top rated of that artist and just sync them to the iPhone, so you can see how important rating it to me as well as many, many more iPhone users.
But, let's say I'm listening to music while I'm running and the iPhone is in an armband. I pretty much can't rate any music then, which *****. So, how about a little surprise with the iOS 7.0.3 update. Throw in the ability to rate music using the voice control and Siri. It's not just because you need to fix bugs and focus on future projects that you can't go back and add some cool updates to some of the old features. It would probably take on of your developers like 15 mintues to code it into the OS.
Let's have a happy update soon. Remember, iPhone 4 users are still Apple customers, too and I'm sure the Siri users would like that as well.

Only Apple would know their future plans and they haven't said. Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Does anyone use both iPhoto and Aperture

I just got an mac book pro and I am trying to decide what to do with my iPhoto library that is on my old G4 eMac. I'm wondering if the best (and safest) plan would be to transfer that library to the new machine, bring it into iPhoto and then import the entire library into Aperture.
On second thought I wondered if it would be a good idea to leave everything in iPhoto and just open images in Aperture only when I want the extra editing tools... using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
And... is it even possible to import the library from another machine directly into Aperture?
Thanks in advance,
bd

Pick one and stick with it. They don't actually integrate very much.
Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
So if you decide to try this:
using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
You'll end up using two apps to manage two different sets of photos, with twice the complications. Aperture is not an "external editor" and can't be used as such.
Think: Writing your novel in Word and TextEdit at the same time. "I'll write this chapter in Word, this paragraph in TE and then back to word..."
What of you wanted to sync your Photos back to your Phone? Which library will you use? You can't use both.
And... is it even possible to import the library from another machine directly into Aperture?
The routine would be to move the Library to the new machine and them process it into Aperture. Then trash the unwanted iPhoto Library.
Regards
TD

Backup of MacBook using Airport Express and File Sharing

I have an iMac backed up (500GB internal drive) using Time Machine to a Western Digital external drive (1TB) via Firewire; I also have second external drive (500GB) for FCE and Photoshop use. I'm about to buy a MacBook (160GB drive) for my wife, and an Airport Express (connected via cable modem) to give her wireless access to the internet and wireless access to our printer. My first thought was to get the Airport Extreme and try wireless backups for both the iMac and MacBook using Time Machine and connecting the backup drive as an Airdisk. However, I've also been reading about the slow performance and iffy future Apple support for this arrangement.
Well, that's the windup -- here's the question. Is it feasible for me to just use filesharing in my iMac to have the MacBook work files (and folders) saved directly in the iMac public folder? The rationale is that I would change nothing in my current IMac/backup drive configuration. The iMac acts as a wireless network fileserver for the MacBook. The MacBook work files would then automatically get backed up as part of the iMac backups. There would be minimal network use for file use and storage between the two computers because only work files from the MacBook will get saved on the iMac.
Do I have this right, or am I missing something?

Well, that's the windup -- here's the question. Is it feasible for me to just use filesharing in my iMac to have the MacBook work files (and folders) saved directly in the iMac public folder?
Sure. This is not supported by Time Machine but you could open/save the files directly from the Finder or application in use.
OR you could use Time Machine to make a backup of the MacBook to the 1 TB external drive connected to the iMac. That is the scenario I use with my iBook and iMac.

Anyone using source control AND cloud sharing?

Similar Messages

Maybe you are looking for