Anyone using their activated iphone wo sim?

Anyone using their iphone wo service? Any problems or concerns?

My problem is I have a blackberry curve on tmobile which I have to carry and is my phone. Also it works much better as a messaging device. I do like the slickeness of my iphone but will not use it for phone or sms. I am considering canceling the service within the 30 day period to avoind the contract. If they come out with an ipod that does all of this I will sell it on ebay and get the ipod but for now I am enjoying the iphone. If I realy need the EDGE data back I can always go withthe go phone plan.

Similar Messages

HT4623 I am unable to use my iPhone 3GS as an ipod, its stuck on activating your iPhone, sometimes i get an error server is busy or there's no sim card installed, and I am using an activated AT&T sim card, does anyone have any suggestions?

I am unable to use my Iphone 3GS as an Ipod, my Iphone is stuck on activating your iphone, I am using an activated AT&T sim card. Does anyone have any ideas on how I cn bypass the activation screen to use my iphone as an Ipod.

you can't bypass activation. Your phone needs to be activated for any of the functions to work.
This problem happens often to phones previously jailbroken. Is this the case?

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

HT1937 how to activating Iphone with sim card

How to activating Iphone with sim card ?

Please be more specific.
Your question is very vague.
You insert SIM. You connect to itunes.

Activating iPhone without sim card to use it as an ipod.

I'm from Argentina, I will travel to the U.S. and I want to buy an unlocked iphone 5.
During the trip I want to use it as an ipod. I want to use safari, facebook and the camera.
Can i activate it without a sim card to use it? As soon as I get to Argentina I will activate it
with a sim card of a local company. Thanks

Must be an activated sim card? I can take one from Argentina and install it on the iphone. The sim card has no international coverage. It works the same?

Has anyone found their lost Iphone with Icloud succefully?

I recently had my Iphone stolen and my Icloud picked it up for a breif moment in front of someones house. I am from Illinois and it was stolen in Wisc. I had a friend go the house but it was a little old lady. Im pretty sure she did not live alone but my friend did felt a little uncomfortable even going to the door for me. When I continue to go on to Icloud it says my phone is offline but as of today I have been able to call it and it rings until my voicemail picks up. Before it would go to voicemail. Am I correct that there is a chance the sim card is still intact? I did put a lock on the phone so they are not able to access the phone except if they call the number provided by the "This phone is Lost" app I was able to us from Icloud. I am just looking for a little bit of hope that the phone could still be retrieved or brought online somehow before I completely give up home and have it erased. Any success stories or advice anyone has. I did call the police and have yet to get intouch with an officer to file a report but did get feed back that they could not go to the house without a warrent.

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Anyone having trouble activating iPhone 5

I got my iPhone 5 this morning and started to activate it. My sisters activated right seat and mine did not. I called AT&T and activated that way and they said wait for 5 minutes then it should work. Nothing. I called AT&T and they said everything should work from their system. Does anyone have an idea what this may be causing my phone not to be activated yet.

In the iPhone profile, have you defined the iPhone browser? If not, the profile is relying on the resolution and that is what could be throwing it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problème activation iphone carte SIM non reconnus

Bonjour,
J'ai il y a deux jours reboot mon iphone 4s 16giga de chez Virgin Mobile, cependant celui-ci n'accepte plus ma carte SIM virgin mobile alors que c'est bien celle d'origine il m'affiche le message suivant :
Apres avoir contacté le service client de Virgin Mobile celui ci m'explique qu'il y a un problème avec la liaison des serveurs d'activation apple/virgin.
Un jour plus tard je les recontact et cette fois il ne me parle pas de ce problème mais m'éxplique que cette fois le problème viens de mon téléphone, en bref c'est pas très clair.

iPhone: Locating wireless carriers
France
Bouygues
Bouygues Support
√
√
√
√
Free Mobile
Free Mobile Support
√
√
Orange
Orange Support
√
√
√
√
√
SFR
SFR Support
√
√
√
√
√
Virgin Mobile
Virgin Mobile Support
√
√
√
Locked to carrier
It is locked to Virgin Mobile and they have to unlock it

Is it possible to use a Verizon iphone with SIM card?

I am due for an upgrade from an iphone4 (from Verizon) but am moving to New Zealand where they use SIM cards... If I upgrade to a 5s or 5c will I be able to use it internationally?

The 5 series all have sim cards and unlocked GSM radios. But, if you move to NZ with an iPhone purchased in the US you will have no warranty or service support from Apple. That is only valid in the country of purchase.

Has anyone used their Galaxy Nexus in Europe?

Verizon Tech support told me that I could, but i wanted to confirm with you all. Can i only use the data over there? or can i also get voice? I need to order a new phone for work and I'd like to use this, however i travel to China and EU.
Any first hand feedback would be great, but i'll take any comments.
TIA,
Alan

Europe runs primarily on GSM technology which is not compatible with Verizon's CDMA technology. To use a Verizon phone in Europe you'd likely have to have a "world phone" which would contain both CDMA and GSM radios. Although I love the Galaxy Nexus and it should work in Asia, you'll have a tough time in Europe.
You might want to consider the upcoming Galaxy S III, which has both CDMA and GSM radios. Preorders start tomorrow, the device will likely be out later in June or sometime in July. This will probably be your best bet for a great phone that can work anywhere in the world, aside from the iPhone 4S.

Has anyone dropped their new iphone yet?

So I dropped my phone on the carpet the other day, well actually it rolled on the carpet and I had a speck purple case on it. So far it has been working fine. Just wanted to get an opinion from others who may have dropped their phone, if it still works.

I was just worried because it is my first iPhone and I didn't know if just because there is nothing visibly broken, maybe something on the inside isn't working right? Like a loose circuit or whatever.

Anyone used their 15" MBP for FCP?

I've been trying ways to get it working for me, I've seen people using FCP on their laptop to do editing (not capturing) without any ext drives connected to it but I can't seem to even edit properly on my MBP... Kinda frustrating...

Sounds like 2 issues to me:
Your clips' settings aren't matched to your sequence settings. If you drag a newly captured clip into a sequence and it immediately demands rendering, then you've got a clip/sequence mismatch.
Secondly, you don't want to be capturing, editing, or in any way be manipulating media that resides on your internal HD. Sounds like you've seen people do this exact thing but it's certainly not recommended. By doing so you're asking the internal HD to manage: 1.) The OS 2.) The actual app involved (FCP) and 3.) The actual media.
There's too much going on there. Even if you've got a 7200 rpm internal HD, you're asking for problems. And if you don't have that fast a drive - well....
Match your clips to your sequence.
Get the media onto an external drive.
Report back to us.

Anyone using AudioQueue on iPhone?

I cannot get my output queue to produce any sound. The setup of the output queue completes and starts without error. The callback happens over and over, but no sound comes out of the iPhone. I can play a video and hear sound, so the device itself does produce sound.
I can not try the simulator as my app uses OpenGL-ES.
I've seen postings that say AudioQueue is broken in beta 3, but then I've seen other posts that says it works.
So... if you have it working, can you please post saying so and what exact format (44.1kh, 16 bit, stereo etc) you are using.
Thanks!

The following is cut from a bigger piece of code, but will hopefully still be helpful. I've put a small comment (//here) next to AudioQueue specific sections. Keep in mind that I don't know what I am doing... it just works.
ssAudioAQ.h
AudioStreamBasicDescription m_Desc;
AudioQueueBufferRef m_QBuffers[2];
AudioQueueRef m_QID;
From ssAudioAQ.cpp
#define BLK_SIZE 8192
static void AudioCallback( void *aqData,AudioQueueRef inAQ, AudioQueueBufferRef inBuffer)
ssAudioS60 *us=(ssAudioS60 *)aqData;
us->UpdateBuffer(inBuffer->mAudioData); //fill new buffer with a audio data
//here
inBuffer->mAudioDataByteSize=BLK_SIZE;
OSStatus res=AudioQueueEnqueueBuffer(inAQ,inBuffer,0,NULL);
HRESULT ssAudioAQ::CreatePrimaryBuffer(DWORD sampleRate,DWORD sampleSize,DWORD channels,DWORD blockSize)
m_NumBlocks=2;
mBlocks=(SAMPLEHEADER )SSMALLOC(sizeof(SAMPLEHEADER)mNumBlocks);
SAMPLE_HEADER *thisHdr=m_Blocks;
for(DWORD i=0;i<m_NumBlocks;i++)
mBlockSize=BLKSIZE;
thisHdr->dwBufferLength=m_BlockSize;
thisHdr->dwBytesRecorded=0;
thisHdr->dwFlags=0;
thisHdr->dwLoops=0;
thisHdr->dwUser=0;
thisHdr->lpData=(i8 *)SSMALLOC(thisHdr->dwBufferLength);
thisHdr->lpNext=0;
thisHdr->reserved=ssAUD_SILENCE;
MEMSET(thisHdr->lpData,0,thisHdr->dwBufferLength);
//here
AudioQueueAllocateBuffer(mQID,thisHdr->dwBufferLength,&mQBuffers);
AudioCallback(this,mQID,mQBuffers);
thisHdr++;
mSilence=(SAMPLEHEADER *)SSMALLOC(sizeof(SAMPLE_HEADER));
thisHdr=m_Silence;
thisHdr->dwBufferLength=m_BlockSize;
thisHdr->dwBytesRecorded=0;
thisHdr->dwFlags=0;
thisHdr->dwLoops=0;
thisHdr->dwUser=0;
thisHdr->lpData=(i8 *)SSMALLOC(thisHdr->dwBufferLength);
MEMSET(thisHdr->lpData,0,thisHdr->dwBufferLength);
thisHdr->lpNext=0;
thisHdr->reserved=ssAUD_SILENCE;
m_NumBlocks=1;
return(0);
void ssAudioAQ::StartPrimaryBuffer()
//set the block buffer vars
m_BlockIn=0;
m_BlockOut=0;
m_BlockCount=0;
m_CurBlock=0;
//fill primary buffer with silence
Update();
//here
OSStatus res=AudioQueueStart(m_QID,NULL);
m_PrimaryBufferReady=true;
HRESULT ssAudioAQ::Create(HWND hWnd, bool createSFXBuffer, bool createMusicBuffer)
//here
m_Desc.mSampleRate=8000; //44100 works as well, 8K is better for our smaller files
m_Desc.mFormatID= kAudioFormatLinearPCM;
m_Desc.mFormatFlags=kAudioFormatFlagIsSignedInteger | kAudioFormatFlagIsPacked;
m_Desc.mBytesPerPacket=4; //no idea, copied from sample. seems wrong but appears to work
m_Desc.mFramesPerPacket=1; //no idea, copied from sample. seems wrong but appears to work
m_Desc.mBytesPerFrame=4; //no idea, copied from sample. seems wrong but appears to work
m_Desc.mChannelsPerFrame=1; //mono for now, stereo works as well.
m_Desc.mBitsPerChannel=16;
OSStatus res=AudioQueueNewOutput(&mDesc,AudioCallback,this,NULL,NULL,0,&mQID);
CreatePrimaryBuffer(mSampleRate,16,1,BLKSIZE);
StartPrimaryBuffer();
m_IsPrimaryBufferRunning=true;
return 0;

Can i use my contract iphone 4 sim in ipad for data

I'm sure this has been covered but I'll ask again anyway.
I have a contract iphone 4 with O2.
I want to get a new ipad with 3G and was wondering if the sime in the iphone can be sused foir the ipad to ge the 3G Data usage?

No

Anyone using iFolder on iPhone / iPad ??

There are a couple of iPhone / iPad clients from 3rd party - NOT officially
from Novell
I noticed earlier thread in September that there was a problem with
Mindsizzler client & LDAP
and cited a BUG in the Novell iFolder Server code - marked high priority in
Feb 11 but still no fix
Mindsizzler have a test client to check if YOUR sever SETUP is compatible -
that's scarey to think 1 server might work and others don't
I supposeNovell want to sell Filr !! - vapour ware at the moment
I have about 8 clients ranging from a couple of users to 20+ users who would
like iFolder on iPad
Does anyone have actual experience of the Mindsizzler client in actual
deployment??
I know dropbox is the only other alternative.

MikeL,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Anyone using their activated iphone wo sim?

Similar Messages

Maybe you are looking for