Anyone using VXC zero client with IP Communicator, UCCX and AQM?

Wanted get gauge of if running Virtual desktop using VXC zero clients will work replacing our desktop recording for our call center.

There are some known issues like one -way or no voice being heard only while using VPN. Check the following link http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5475/prod_release_note09186a008043a3ba.html for known issues. But in this case I would suggest you to upgrade the VPN client software

Similar Messages

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Hi 4judy,
If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Regards,
- Brenden

Has anyone used Aperture 2.0 with 8800GT?

Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

Hi Don
I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
Hope this helps
John Blake

Advantages and Disadvantages of Using Oracle 7 Client with Oracle 9 Server

Hello,
I was wondering what are the advanatges of using Oracle 7 client with Oracle 9 Server versus using Oracle 9 Client with Oracle 9 server.

Some years ago I used 7.3 Client with 9i DB, and I don't remember of particular problems, but I'm speaking of Sql*Plus only. Are there specific problems ?
Of course the best thing is to install one 9i Client (did you already do it ?) : if there are same problems, then that's not compatibility issue.
And what are advantages of using 9 Client with 9 server other than 7 is no longer supported.You're sure you won't have compatibility problems.
If you have access to Metalink have a look at [url http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOTE&p_id=207303.1]Note 207303.1

Has anyone used Verizon Fios Services with Windows 7 ?

Has anyone used Verizon Fios Services with Windows 7 ?

Yes Beta And RC. It works the same as Vista, with probably some enhancements. Didn't have any issues, but I did not try wireless.

Anyone using Brother HL-2170W with their Mac?

Anyone using Brother HL-2170W with their Mac? I read some reviews at newegg and they are not bad , but at the apple store the reviews are not that good at all. Is this because it is not working well with Leopard as most printers don't or what?

Verizon informs me that Windows is only needed to download and install some form of authentication and that the free wi-fi hotspot service can be used from then on from the Macintosh side. Even though it's a Windows program, I'm assured that the authorized status will be detected when the Mac laptop is used under OS X

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, ju

Currently using Photoshop CS5, but with a replacement computer and upgrade to Yosemite, keep being told I need to install the legacy Java 6. Currently, Photoshop won't even open. I absolutely do not want to subscribe, don't want to mess with the cloud, just want to buy an upgrade to something that will run for a while longer. I don't care about Lightroom, Bridge, Illustrator, etc.; most of those I've deleted over the years. But I do use Photoshop - or would if it would still run. What options do I have?

This is the java you need for photoshop cs5 to work on mac os x 10.10 Yosemite
https://support.apple.com/kb/DL1572?locale=en_US
It's also possible you may have to reinstall photoshop cs5 even after installing the above java, because sometimes the upgrade to mac os x 10.10 messes up the photoshop cs5 installation.
You can download photoshop cs5 from here if you don't already have the install media.
https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Can the Ipod 4th and 5th generation be used as GPS? With the app Waze and under Wifi?

Can the Ipod 4th and 5th Generation be used as GPS? With the app Waze and under Wifi?

Mini-education...
GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network. GPS signals come directly from the GPS satellites. They provide signals that allow GPS receivers to calculate latitude and longitude information. Navigation software then takes that latitude/longitude info and converts it to land mass, roads, bridges, highways, buildings, etc.
Most navigation software stores the maps right in the iPad/iPod/iPhone but a disadvantage is that the maps must be periodically updated (perhaps once every two years). The Internet is not required to use the system but it is required to update the maps.
Some navigation software gets the maps from the Internet and requires an Internet connection to function but an advantage is that the maps are always up-to-date.
The WiFi+3G/4G iPad and the iPhone both have a GPS receiver. The WiFi-only iPad and the iPod do not and these devices require an accessory.

HT4111 Can I use my magic mouse with my wireless keyboard and iPad2

Can I use my magic mouse with my wireless keyboard and iPad2

Sorry, but no. Because the iPad does not have a cursor for you to use the mouse with.

Has anyone used Lookout 4.5 with Motorola MOSCAD?

If so, please send me an e-mail at [email protected] My question is, Can I use the ModbusMOSCAD driver to talk directly to a RTU in the field via radio without using a FIU or do I have to use and FIU and talk modbus to the FIU and let the FIU gather the info from the field?

Here's what the Lookout online help says:
The ModbusMOSCAD object class works with Motorola MOSCAD PLCs and RTUs. It also uses the Modbus Serial (ASCII or RTU) or Modbus Plus communication protocol, but its data members reflect the address of Motorola MOSCAD devices.
It looks like you should be fine using the modbusMOSCAD object in Lookout

Anyone using Blackmagic Intensity Pro with Premiere CS4

I've looked through the threads and have seen similar postings, but no real good answers. Is anyone using Blackmagic Intensity Pro to viiew timeline on a HDTV using the HDMI connector?
I purchasedf the Intensity Pro and can't get it to work with CS4. Any assistance would be appreciated.

If you're using a Core i7 processor, one of the problems might be with the motherboard. There's only one Intel board that BM has approved (sorry, don't have the model in front of me -- on a piece of scratch paper in my wife's car).
I'm looking to build a new system myself and have been looking at the Intensity Pro card as well. The main feature I'm looking for is real-time preview and program output to an HD monitor that I'd hook up via HDMI. I probably also would use it to capture analog sources for audio and video. I don't have any interest in BM's lossless data capture as it creates monster-sized files. That's why I was also planning to add Cineform once it's fully approved and working for CS4. However, as best as I can tell, the Intensity Pro card doesn't recognize the Cineform codec on the timeline. Does anyone know if and how well these two will function together within Premiere? (I'm also assuming that the new 4.1 release might make these types of Premiere add-ons work better.)
Thanks.

Has anyone used a MacBook Air with a TV as a monitor?

Wondering if anyone can advise on experience with using a tv as a monitor? I don't believe Mac make just a monitor for this purpose do they?

it's ok, highly pixelated, meaning you will see pixels. I would say its great to watch videos, but any reading or such will be displeasing. Really depends on the pixels per inch of your TV also. But, I would stick with nothing more than 27" for reading or anything text based.

Anyone using a 4K monitor with FCP X?

Is anyone using FCP X on a 4K monitor? I'm thinking about getting a Dell 4K monitor as my main monitor but I'm a little worried the user interface support on 4K is weak. I think everything is going to look super tiny.
Has anyone already experienced this?
Thanks!

So I have my new Mac Pro set up. 8-Core, 32 gigs RAM, Dual 700 GPUs, 512 gig internal Flash drive.
I purchased the 27" Thunderbolt display as my main Final Cut Pro X screen and I have the Dell UP2414q 4K monitor plugged in as the Viewer display.
I have the Dell set to "Best for Display" and it works fine. I have some 4480 x 1920 RED footage and I have the FCP X Viewers on the Dell. The footage is set to 100% and it bleeds a little off the sides, as it should since the monitor is 3820 wide. It's at its native resolution.
The user interface elements of the second monitor are at normal size - the menu bar, the FCP X view options. Buying a 4K monitor and using Best for Display gives you the desktop the size of a typical 1080 monitor, but it all looks like a Retina display. It's very crisp.
So if you want a second monitor to hold a ton of Adobe palettes, and have a very large desktop, I'd recommend getting a Thunderbolt display, beause this display behaves like a 1080 monitor in that regard. If you want a 4K monitor specifically for color grading 4K footage at the native size so you can see all the artifacts and things you wouldn't see with the footage at 50%, this Dell monitor is fine and it's $890 on Amazon. It's not a professional color grader's monitor, obviously, but it does well for me.
I took some 4480 x 1920 RED footage that had a sky that was gray (the famous Mercedes in the mountains footage). I used the color picker color correction in FCP X and was able to select that sky very easily. I can see why the fat 4K footage is so great in regards to color grading. Because you don't have the massive color gradiation and artifacts you get in the more compressed media, when you use the color picker, it selects a very large, clean, section of the sky. I was able to quickly make the sky more saturated and blue and play it in real time (Better Performance) it's it's perfectly clean with no halos around the tree branches as they move into the foreground of the sky. Very nice!
Nice feature in FCP X is all the effects, transitions, etc., have a "4K-ready content only" button at the top so it only presents you with effects and transitions that work with 4K footage.
It took a lot of time calibrating this Dell monitor. It has the Adobe RGC color space built in but when I set it to that and set the OS X Display color option to Adobe RGB, it all had a very slight purple/pink huge. Very slight. Whites were not pure white like they are on the Thunderbolt and my blue sky had a tinge of pink to it.
I calibrated it with advanced options in the OS X Display preferences. I then connected my Samsung HD LED TV into the HDMI port of the Mac Pro and set it as my A/V display in FCP X. I was able to do the custom color setting on the Dell monitor itself and lower the saturation and RGB values. It took about 15 minutes to get it looking right. Now, I don't see the very slight purple/pink tink. My blue sky looks blue, etc., and it looks exactly how it will look on DVD and Blu-ray and projectors at film festivals.
The Samsung LED TV was a breeze to use. As soon as I plugged it into the HDMI port of the Mac Pro, the displays changed and OS X went to 1920 x 1080 60hz. The color was set to an HD color preset (I forget the number and I disconnected it). Arranging the multiple monitors is as you'd expect, just works.
BTW, I have 2 10 TB 5Big Lacie Thunderbolt 2 hard drives. They are about $1K each at 10 TBs. I have one for my footage and one as a backup with Time Machine. No formatting necessary - just plug them in and go. I plugged in the first one, told OS X no for Time Machine. Plugged in the second one, told Time Machine yes. Renamed the second drive "Backup". I turned off hard drive sleep becuase it's annoying. You hear it spin up, spin down, spin up, etc. as you work.
I used the AJA benchmark and this is what I got with 16 gig test file, 4K video simulation:
Write 740.3 MB/s
Read: 849.1 MB/s
Fast!
FCP X loads in 4 seconds on this system off the internal Flash drive.
Cheers!

Anyone using VXC zero client with IP Communicator, UCCX and AQM?

Similar Messages

Maybe you are looking for