Anything I should be worried about when installing Windows XP via Bootcamp?

Are there any common problems I might experience? It is a 100% legit key of Windows XP. I really don't want to ruin my macbook considering it took me a long time to save up my allowance for it.
Will my mac still be under warranty if I install Windows XP and dual-boot with OSX?
Message was edited by: ComradeNF

Yes, Boot Camp will allow you to install Windows XP.
As far as problems go, you will only have the usual Windows problems.
You will also need to install anti-virus software for your Windows installation.
No the installation of Windows will not void your warranty.
Allan

Similar Messages

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

Unable to install Windows 7 via Bootcamp on MBP mid-2012

Posted here from my original, since the old one was basically in the wrong thread. https://discussions.apple.com/message/25097756#25097756
I have a mid-2012 Macbook Pro 13" with the 2.9ghz i7 configuration, 8gb ram, intel HD 4000, Crucial M4 256gb SSD, and the original 750gb hard drive that was included in the computer. I made the SSD my boot disk.
I've been trying to install Windows 7 via bootcamp for a few days now. The first time I tried it I walked away from the computer after it got to the "Copying files" part of the windows 7 installation so I wasn't able to see what went wrong. When I try to start the computer it goes to the blank DOS screen (or terminal, whatever you prefer to call it) with the flashing cursor for text but I cannot enter anything and it just sits there. So I figured something may have gone wrong with the installation and I tried to do it again.
I re-wiped my 8gb flash drive, redownloaded the boot camp support files, and again started the installation with windows 7. The first time I tried it I had to reformat the "BOOTCAMP" partition that it had created on my SSD because it wouldn't write to it as it was not formated in NTFS. I spared 60gb for the Windows boot. So after reformatting I went through with the installation again. Now I get to the screen where it asks me what username, etc. After I finish entering in my credentials it starts to say "preparing desktop" and then I hear a loud CLICK and the entire machine just reboots and takes me back to the blinking cursor. Is this a common problem when trying to install windows? Thanks!

Have you modified BC Info.plist? Can you verify that you a valid ISO using Microsoft FCIV tool?
Your Windows 7 USB should have a directory structure similar to the following.

Installing Windows 7 via Bootcamp with OS X Lion

Hi all,
I have just bought a new 21.5 inch iMac preinstalled with SL and have the Install DVD for 10.6.7.
I have recently upgraded to Lion OS X (eligible for free download due to recent purchase of the iMac), but now want to install Windows 7 via Bootcamp. As I understand it, I have to reinstall the drivers for Windows 7 to work, but I only have the DVD for SL, not Lion.
Can you advise on how to get around this? Can I save the drivers for Lion on a blank DVD - if so where do I find the files? If I'm right, I think I select 'Download the windows support software for this mac' option when I first go in to Bootcamp and have a blank DVD in the drive. Then I can use the DVD as if it were a Lion Install DVD - is this correct?
Think I also need a USB wired mouse as wireless is disabled when installing windows.
Thanks for your time

Sorry I didn't respond sooner....Hurricane Irene knocked out all our power
The initial install (at least for most of the reboots) does correctly reboot to Windows. However, towards the end of the Windows setup, where Windows is fully functional but is configuring itself, you may accidentally boot into OS X. Once you get Apple's Boot Camp drivers installed, you can set the target disk for a reboot, so that you don't need to hold down alt/option. In addition, you can also set the target disk in Lion via System_Preferences>System>Startup_Disk.
Unfortunately, the excellent boot manager rEFIt doesn't work with Lion (because of the hidden partition that Lion adds). Maybe they'll get it working soon, then you can use it and not worry about holding down alt all the time.

Installing Windows 7 via Bootcamp on Snow Leopard. No Disc Drive.

Hi all,
I have a White macbook late 2006 model. The superdrive in it has failed and I'm trying to install Windows 7 via Bootcamp. I downloaded an open source app called rEFit that allows me to boot to a usb drive. I created the boot camp partition using boot camp and I chose the Quit and Install Later option on boot camp. BTW I have Mac OSX 10.6.8 using Boot Camp 3.0.4. I restart and go to boot to the usb drive and it gives me the no bootable drive error. The usb drive was created as a bootable usb drive using a macbook air using an windows 7 iso in boot camp. Does anyone know anyway that I can get windows 7 installed on this macbook via bootcamp. Virtualization software (ie VMware Fusion, Parallels, etc) is not an option (CS 6 will slow the computer to a halt if I attempt to run it in virtual machine of windows). Any and all help will be appreciated.

Sorry I didn't respond sooner....Hurricane Irene knocked out all our power
The initial install (at least for most of the reboots) does correctly reboot to Windows. However, towards the end of the Windows setup, where Windows is fully functional but is configuring itself, you may accidentally boot into OS X. Once you get Apple's Boot Camp drivers installed, you can set the target disk for a reboot, so that you don't need to hold down alt/option. In addition, you can also set the target disk in Lion via System_Preferences>System>Startup_Disk.
Unfortunately, the excellent boot manager rEFIt doesn't work with Lion (because of the hidden partition that Lion adds). Maybe they'll get it working soon, then you can use it and not worry about holding down alt all the time.

Error installing windows xp via bootcamp

Hi guys,
I just bought my macbook pro yesterday and I tried to install windows xp via bootcamp and after the installing it says "setup is starting windows" and then an error saying "session3initializationfailed" came out.
I downloaded windows xp sp3 from my university and burn it into a disk.
Can anybody tell me what's going on or what did i do wrong?
Thanks

Greetings Appelonians
I am privileged to have attained a brand new Macbook Pro 2010. I am not completely new to Apple and have used 'boot camp' on my other iMac's have have owned previously. In the process of installing Windows XP on the new Macbook Pro, I came upon a few challenging errors, some I have solved, but others getting the best of me at them moment. I am going to run through my situation I am at the moment, starting with my initial challenge, the solutions I came up with and at last the cul de sac I am at the moment.
The family of errors all evolved with me trying to install Windows XP on my Mac
A) Windows on my Macbook
1) I used Boot Camp to create a 50gm partition for Windows XP.
2) I booted up with the WinXP Install CD (original)
3) Deleted the Boot Camp Partition, recreating it and formatted it as NTFS.
4) Rebooted and got my first error after choosing to have the Macbook reboot with the newly installed WinXP partition.
Error
Windows could not start because the following file is missing or corrupt:
<windows_root>\System32\hal.dll
Please re-install a copy of the above file.
windows_root\System32\hal.dll missing or corrupt:
Please re-install a copy of the above file.
Windows could not start because of a computer disk hardware configuration problem.
Could not read from the selected boot disk. Check boot path and disk hardware.
Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information.
Error Fix
1) I used a Bootdisk created by BartPE and changed a line in the Boot.ini file. Apparently this issue is due to the fact that the Macbook Pro has a 200Mb partition, the Boot.ini refers incorrectly to the wrong partition when trying to complete the WinXP installation after rebooting.
2) I changed the line in the Boot.ini that refers to the partition as 3 to 2 (see bold below):
[quote][boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Micro soft Windows XP Professional" /noexecute=optin /fastdetect [/quote]
3) This fixed the issue and Windows started after the reboot, remember still that my WinXP installation is still incompete.
B) Blue Screen of Death
1) During the WinXP run screen, my second error popped up as one of the dreaded [URL="http://justasktheitguy.com/software/blue-screen-unmountablebootvolume-stop-0x000000ed-0xaaaaaaaa0xbbbbbbbb0xcccccccc0xdddddddd/"]Blue Screen of Death[/URL], as found at the mentioned link.
2) It seems that this error is caused by a problem with an IDE cable or the BIOS in which case you just replace the cable or reload the fail-safe default settings in the BIOS. However, most of the time this error is caused by some sort of problem with the volume.
3) I booted again with my boot disk and ran 'chkdsk -r' and there after 'fixboot' to fix any errors regarding the volume of the HDD. (Fix can be found at the above mentioned 'Blue Screen of Death' link.)
4) Now I know that Mac does not use a BIOS but a EFI and this is where I am stuck.
All I need is to get WinXP installed properly on my New Macbook Pro. I had no trouble installing WinXP on my other iMacs and this has been the first time I had this issue. I do own a copy of Parallels, but I would like to run WinXP on a seperate partition with the option of either booting up with WinXP as well as using WinXP as Virtual Machine in Snow Leopard.
Hope some one out there can assist me, please.

Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

Hello,
I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
Do you think that this is because I do not have Bootcamp installed on the Windows 8?
I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
P.S. Mac OS X partition boots fine.

If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Installing Windows Xp via Bootcamp

I recently decided to install windows Xp via BootCamp on my MacBook Pro and ran into a problem after the Blue screen asked me if i would like to install Windows XP now. It appears that my keyboard is unresponsive. What I'm asking for is help to either get the Windows Xp disc out and pretend this never happened or to finish the installation. Thanks in advance!

Having same problem, but I see this question was posted in August! Any progress made?

Recently installed windows 8 via bootcamp and mouse is freezing up on windows side, recently installed windows 8 via bootcamp and mouse is freezing up on windows side

I recently installed windows 8 via bootcamp and mouse pad is freezing up on the windows side. Are there any fixes out there for it.

If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Install Window 7 Via BOOTCAMP and create extra partitons for Personal Data

Hello All;
I'm new to Mac, Just purchased the MBP Mid 2012 non retina 2 months ago.. and upgraded to Mountain Lion 10.8.2
I'd like to Install Winows 7 via BOOTCAMP and have extra 1 or 2 partitions (ExFAT) on the same drive for my personal data, any advise on how to do this properly... I tried in many different ways but always ended up hitting the wal..
Appreciate the help.

Won't work.
http://www.apple.com/support/bootcamp/

Installing Windows XP via Bootcamp 3.0

Hi everyone! Hope you can help me with this:
I was trying to install Windows XP Profesional with SP 3 included on my MBP 13" 2011 but after creating the partition Boot Camp warns me that it only support Windows 7 editions. Does this mean I can't install Windows XP via Boot Camp or that I just need to search the drivers on my own, assuming they aren't on my Mac DVD? I already have a Windows XP copy on a CD so I don't want to spend money on Win 7.
Regards,
Guido

XP is not supported on the newer Macbook Pros. See here: http://support.apple.com/kb/HT4410
You could use a VM like Parallels, Fusion, or VirtualBox to install XP SP3.

Sometimes my hard disk makes a low crackling sound. Anything I should be worried about?

I have a Pavillion DV6 6121tx, with a 5400 RPM 640GB hard drive. I bought this laptop 3 months ago, and recently sometimes i notice a low crackling sound coming. I guess it would be coming from the hard drive only.
Should i take it to Customer Service Center?
I did do a check to see any errors by using TuneUp Disk Doctor.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Firstly thank you for your reply.
Indeed, a hard disk noise is not normal and just mean the end of his life. But I know this sound well because my other computers also crack and for some of it, it's unbearable. Yet they make it since long, this has never been otherwise, and their hard disk always go good.
My problem is that the noise appeared suddenly, for an unknown reason, and according to all the software I've tested, he's always fine.
In your opinion, when I will format my hard disk to install Windows 7, it could have an effect?
Otherwise, as a last resort, I would see the service after sale of my store and then we'll see ...
Sorry for the many mistakes ...

Error 0x80300024 When Installing Windows 7 Using Bootcamp

Hi. I'm trying to install windows on my mac mini. I have a 2010 mini server with dual 500gb hard drives. I want to have one disc for apple and the other disc for windows. When I try the install I get the windows error 0x80300024. After some research I found a straightforward, but not easy solution. It seems windows freaks out when it sees more than one physical hard drive. Therefore the solution is to disconnect the cables for the other hard drive, install windows on the target drive, then reconnect the cables to the other drive. I rather not tear open the mini and do this as it looks a little painful. Anyone have a suggestion on how to get around this? And yes, I know it's a windows issue but i figured there must be some mini users who've experienced this issue.
Thanks.
Craig

Hi Graig,
One possble solution here, with maybe alt key to boot your Windows installer instead of the c key...
PrincessPeachJun 17, 2009, 06:48 PM
I just installed it today (twice actually, after changing my mind about something) so I can tell you how to do it. What I did was completely ignore Boot Camp and used Disk Utility to format the intended Windows drive as FAT32/Master Boot Record. Then I just rebooted with C held down and the Windows 7 CD took care of the rest.
I have a 2009 Mac Pro so all my drivers etc were on my OS disc. If you need to burn the drivers, by all means use Boot Camp just for that part
I got a warning in Windows 7 that Boot Camp had issues with the RC but it has been rock solid so far.
http://forums.macrumors.com/archive/index.php/t-722467.html

Anything I should be worried about when installing Windows XP via Bootcamp?

Similar Messages

Maybe you are looking for