Anything missing?

Hi all,
Windows 2008 R2 SP1
Two HP NICs has been configured to use teaming
When one NIC fails, the whole team was down for a while.
So, anything we need to check on the switch config?
Thank you!

actually, that's what we have configued on NIC.
just wonder, why one NIC fails, whole team is down for 30 seconds. could due to switch config??
log:
Event Type:     Warning
Event Source:     CPQTeamMP
Event Category:     None
Event ID:     434
Date:   1/31/2013
Time:          5:37:26 PM
User:          N/A
Computer:     CBGDATA2
Description:
HP Network Team #1: PROBLEM: A non-Primary Network Link is not receiving.
Receive-path validation has been enabled for this Team by selecting the Enable
receive-path validation Heartbeat Setting. ACTION: Please check your cabling to
the link partner. Check the switch port status, including verifying that the
switch port is not configured as a Switch-assist Channel. Generate Broadcast
traffic on the network to test whether these are being received. Also make sure
all teamed NICs are on the same broadcast domain. Run diagnostics to test card.
Drop the NIC from the team, determine whether it is receiving broadcast traffic
in that configuration.
Data:
0000: 00 00 00 00 02 00 58 00   ......X.
0008: 00 00 00 00 b2 01 04 80   ....?..€
0010: 00 00 00 00 00 00 00 00   ........
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........

Similar Messages

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is.

Anything missing from my Action Script?

Hello
I am trying to view a newsfeed - which works in a normal
browser - in my (MX 2004) movie.
I have this in my AS (2) panel:
myFeed.onLoad = function(success){
if(success){
bbcNews_txt.htmlText = this.html;
}else{
bbcNews_txt.text = "Error!";
and text is rendered as HTML but I am unable to see the news
feed.
I am using a server-side script to generate the feed and if I
click on this ASP file in a browser I get:
&html=
followed by the newsfeed itself.
The script ends as follows:
Response.Write "&html=" & Application("rss-html")
Do I need to be using anything else in my AS (such as
loadVariables("BBCfeed.asp", 0);?? and if not, what might
be the problem?
Many thanks.
Steve

Restoring Lost OS X Files
If you erase or otherwise "lose" an OS X system application or utility (such as Mail or Disk Utility, for example) you can restore them without having to reinstall OS X.
Download the shareware utility Pacifist. Read the documentation. Use Pacifist to extract a fresh copy of the missing application from the file archives on your OS X Installer disc. The file archives are usually found on the installer disc in the /System/Installations/ folder.
After restoring the application you need to reinstall the OS X Combo Updater for the version of OS X you currently have installed. This assures the new copy of the application is updated to the current version.
Lastly, it's a good idea to repair permissions.

TS2516 I completed a book and when I try to submit it to be printed I keep getting a message that says I cant print it because I seem to have a frame or a page without a photo on it. I do not have anything missing but cannot complete order

I completed a book and when I try to buy it I am unable to because I get an error message that says I have missing picture frames or pages without pic and I cannot order it unless they are filled. I have no missing photo frames or pages.

Look for a page configured like this:
This particular layout is the easiest to miss.
OT

Itunes: i want to find a single fix for missing music on itunes rather than using "iTunes: Finding lost media and downloads" on a case by case basis.

recently when i was creating a playlist, i realized that i was missing music from my extensive itunes (12.0.1.26) library. i found the solution "itunes: finding lost media and downloads" and used the general approach to find the music in finder and copy it to itunes. i don't want to do this every time i find i am missing music. is there an automated fix? i want apple to develop a way to automate the fix. can it be that this isn't a problem for many people?
i ask this now because i just looked for music i thought i had but can't find. maybe i am wrong about having the artist, but it has happened on another artist too. i can't trust itunes to tell me whether i have a song or not. i don't want to keep going back to finder, especially when the instructions in "itunes: finding lost media and downloads" doesn't actually reflect my system (os x 10.7.5).
i don't want to try to do a restore. i have never done a restore on my mac (previously a pc user). and, i don't know how far back to take the restore to find the old music. and then music i have added since i lost the old music wouldn't be there.
i understand that there are so many system variables that apple would need to take into consideration with a general fix. but: i am assuming that apple's changes have caused my problem and feel that apple should do something to fix it. perhaps my assumption is incorrect.
thank you for your help.

limnos, i always have backups. the problem is that i don't know how far back in time to take a restore because i don't know how long this has been going on. and, if i take the restore back very far, i will lose what has been added since the music started to disappear.
i don't even know what you mean when you say "you will check there aren't any broken links (use a script from the Dougscripts web site) before you do a backup."
i agree with you to some extent about not automatically installing upgrades. i'm still running lion and was pushed to it from snow leopard. the problem is that i have a hard time envisioning the changes described in an update to judge whether something is valuable or not.
i have questions about your last paragraph. i'm going to repeat it here and then insert my questions as i go. please forgive my all caps for the moment:
"Now for your missing music, is it that there are broken links, or are things missing completely from the library?" I DON'T KNOW ENOUGH TO ANSWER THAT QUESTION. I BELIEVE THAT THE PROBLEM HAS TO DO WITH BROKEN LINKS. WHEN I COULDN'T FIND THE MUSIC THAT I THOUGHT I HAD LOADED INTO ITUNES YEARS AGO, I FOUND THE CD'S AND IMPORTED THEM TO ITUNES. I GOT A MESSAGE ABOUT SOME OF THE TRACKS BEING DUPLICATES THAT ASKED WHETHER I WANTED TO IGNORE OR IMPORT. I CHOSE IMPORT BECAUSE ITUNES DIDN'T TELL ME WHAT WAS DUPLICATED. IT WAS ONLY AFTER RE-IMPORTING SEVERAL CD'S THAT I REALIZED THAT THERE WERE NOW DUPLICATES OF THE CD'S: THE FILES I HAD JUST LOADED AND THOSE THAT I HAD LOADED SOME TIME AGO. THE ORIGINALS MAGICALLY APPEARED AFTER I RE-IMPORTED THE CD'S. I'M GUESSING THAT THIS IS AN EXAMPLE OF A BROKEN LINK I DON'T KNOW HOW TO RECOGNIZE A BROKEN LINK OR HOW TO PREVENT ONE. AFTER I REALIZED THE PROBLEM, I FOUND THE "FINDING LOST MEDIA AND DOWNLOADS" QUIDE. I LOCATED THE MISSING MUSIC IN FINDER AND DRAGGED IT TO ITUNES. DOES THIS COUNT AS A BROKEN LINK?
"If the latter and you use iTunes default settings for managing media, you can drag your media folder to Automatically Add To iTunes. It should add anything in the folder but not in the library list but ignore things that are." CAN YOU REPHRASE THIS LAST PARAGRAPH? I DON'T KNOW WHAT "DEFAULT SETTINGS FOR MANAGING MEDIA" MEANS.
FOR "DRAG MEDIA FOLDER TO AUTOMATICALLY ADD TO ITUNES," I THINK YOU MEAN I CAN DRAG /MUSIC/ITUNES/ITUNES MEDIA/MUSIC IN FINDER TO THE ITUNES ICON IN THE DOCK. AND, THAT THAT ACTION WILL REPLACE ANYTHING MISSING IN ITUNES BUT NOT DUPLICATE THE FILES THAT ARE IN ITUNES. IS THAT RIGHT?
thank you for your time and help, limnos.

How Many Functions And Keyboard Shortcuts etc. Are Missing From FCE 4 ?

Seven hours ago I set out to discover the answer to this but I got side-tracked and discovered my camera had a microphone channel missing !
So is there anything missing from FCE4 ?
There have been spurious claims that things like "Export to Soundtrack" have been dropped and though the actual command has disappeared the functionality is there in "Export to QuickTime".
However, I seem to remember Tom saying that a certain keyboard shortcut (which I can't remember) is missing.
Has anyone noticed any particular items that really have been omitted ? (Don't say Soundtrack or 9GB of LT Media!)

Hi Ian,
just to confirm that what you and Tom have found is the same I have so far.
A comment: while all other commands now missing in the FCE4 contextual menu are available in its standard menus, the Clip Enable command is really a ghost command. Only the control-B keyboard shortcut toggles it, there is no mention of it in any menu, but it appears in Tools/Button List. The online Help mentions a Modify/Clip Enable commands that does not actually exist, but on the other hand it does not mention its keyboard shortcut that in fact works... very clear!
Piero

WHT report S_P00_07000134 missing vendor credit memos

Dear All,
Report S_P00_07000134 is missing to show vendor credit memos having doc type KG, I have checked config in Define output types, vednor cr memos is already active ,also tried with variety of input selection parameters but not getting these documents, can someone pls advise the reason behind it, or is there anything missing ?
Thanks in Advance.
Nilesh

Hi,
Please find the below link it will help full for you............
No records were selected - S_P00_07000134
Naresh

My iMac suddenly went from 9 GB free to 100 GB free space. Can't find what is missing?

10.6.8, late 2009 imac, parallels, Win XP, 1TB hd. Can't find anything missing. Have compared with Time Machine backups, have clicked on various files to verify they are still available. Haven't verified every file, but all spot checks show files still there. A few months ago HD started running almost constantly for 1-5 mins when Finder is open (ran Activity Monitor) and imac slows way down, almost unusable till hd access stops. Now suddenly the free space has gone from 9 GB to 100 GB. I've run with 8-20 GB free space for 2 years. Disk util shows no prob. Where did extra 90GB come from? Where can I find out what might be missing?

Bob, this has taken awhile, but I've done all you suggested.
I did do 2 Apple software updates just before the 9 gb of free space turned to 100 gb. I remember there was a Safari update plus I finally did the iTunes update that had been sitting in the update list for months. Neither required a reboot, which surprised me, but I did a reboot anyway. My entire Music folder on my hd was about 32 gb after the update and looking at the Time Machine backups was about the same before the update. Is it possible there were huge hidden files, caches, etc associated with it that may have gotten deleted with the reboot?
I looked at the sizes on all my Time Machine backups over the past year up through the ones I did immediately after the free space change and one I did 5 days after the change. This is where I was totally SHOCKED. All of them show my Mac HD about the same size as it is now - 899 gb! Even tho Finder showed only 8 to 20 gb free during the past year, Time Machine's backups were 880 to 899 gb in size, basically 100 gb less than what Finder showed. And they're the same size now. So I'm thinking you were right in your original thought that some huge swap, temp, etc files suddenly got deleted???
I checked actual folder and file sizes and contents currently and in the Time Machine backups before and after the 100gb change. Also in backups several months ago. All are similar or reasonable. So I don't think any of my data is missing. Whew!
I wondered if something (not data) in Parallels using Windows XP was deleted. Over the past month there have been many hangs or sudden closing of a few Windows programs. I know these create dumps of data, and looking in Windows I only found a couple dumps, but they were very small in size. Don't know if this could have totalled 100 gb tho. I close Parallels or reboot Win XP frequently, always after probs in it. I close it also before doing TIme Machine backups. I did just do a TIme Machine backup with it still open, but there was no difference in the size of the backup file. Is it possible temp, dump, etc files were held by WinXP over the past 2 yrs, then suddenly deleted? The timing of this with WinXp no longer being supported did pass thru my mind also. I have Norton antivirus in the Windows side of my mac, so no virus warnings, tho I did think of that too.
I also spent time looking (not touching) the tmp, log, etc files you showed me how to get to. Very interesting. I am actually surprised my computer is still working after looking at all the error msgs in the logs.
Thank you for all your help and suggestions, Bob. I'm confident my data is still ok. So now with all this extra space I can update Parallels and then update to Mavericks. Does that sound reasonable to you?

G500 laptop upgraded to windows 8.1 now have a message missing a driver

My G500 laptop just upgraded to Windows 8.1 and now my alert action center message tray says I am missing a driver?
I can’t find anything missing? I looked through all the devices 5 times but nothing is marked with a question mark or similar?
Any thoughts?

Hi deagonslair2013
What you describe has been happening since the preview, Because all devices on a network talk to each other the driver error may not be on your G500 but on another device on the network.
For instance: I own a G700 & G505, I connected a tablet to the G505 & it installed the device but could not find any drivers for that device, Since then my G700 has been showing a driver missing although all devices are working fine on the G700 in device manager.
If you have any other laptops or desktops on your network with device drivers missing disable those devices & re-run the hardware scan on your G500 & see if that is the cause.
Edit What version of Lenovo solution center do you have installed, It should be version 2.3.002.
If your version has a .18 in the string its out of date & you need to update to the above version.
Hope that helps!
And welcome to the forum.
Catt

WSUS lists app. 178 missing updates for the Windows 8/8.1 clients, but the clients report that no updates are necessary

We are operating a small network consisting of a SBS 2011 and a few clients, most of which operate WXP and W7. Some time ago we converted the first client to W8 and noticed, that WSUS reported a big number of missing updates (all being language packs and
language interface packs), which the client never pulls, as from its perspective everything is in best order. When searching for updates over the internet the client again does not detect anything missing.
We first thought of an issue with this single W8 client, as neither the WXP nor the W7 machines show the same phenomenon, but recently we introduced the first two W8.1 clients, and interestingly we saw the same problem. The question now is, why
does WSUS believe that these updates were necessary whilst the clients themselves are convinced that everything is fine? And who is right, WSUS or W8/8.1? (I tend to believe the clients, though.)
Best regards, Dietmar.

why does WSUS believe that these updates were necessary whilst the clients themselves are convinced that everything is fine?
Because you're misinterpreting the meaning of the state "Needed"...
which is discussed elsewhere in this forum ad naseum.
And you're making the mistake of trying to compare information with WU with information from WSUS. The two are not comparable.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Full ACR + Bridge LE = a missing product ?

This could be the wrong subforum to ask (and Im sure someone will tell me), however, heres the story and the question:
Two of my kids (9 and 12 years old) are currently making their first steps in digital photography. So we tested different software for image processing, including Photoshop CS3, Lightroom and PS Elements 6. Purpose was to find something simple while still getting best possible results in the given context. Following are our impressions:
1.) ACRs ability to open Raw as well as JPG files was found to be very useful. In many cases, a separate Pixel-editor such as given with main Photoshop or PSE was not necessarily needed anymore (even though my heart is with the main Photoshop platform).
2.) Bridge was loved. Whereas LR and PSE soon got ignored due their Organizer and this DAM import/export thing. Ive heard that Mac users are more familiar which the procedure. However, were on Windowz boxes. We (I) expect a Browser to show the files in the given file structure as it is.
3.) ACRs functions were found to be too much reduced in PSE. Full ACR including e.g. the HSL tab etc. would be preferred.
Anything in the pipeline (or anything missed) which could be called Full ACR + Bridge LE (light edition), while running on Windowz ?
Please note that this is not a question about pricing and getting the best for least money. If it costs as much as (lets say LR), so be it.
Peter

Hi Peter,
Just a comment on your LR import/export issues. I agree and dislike the way it requires importing images, but I've got a work around that is semi-satisfactory (for me anyway).
I've imported a single folder at the top level, under which all my own folder structure is organised. When I have added images to this structure I "synchronise" the top level folder, which basically just imports the new images into the LR database.
It's far more time consuming than it should be (especially as the folder grows bigger), but atleast it means LR sticks to the folder structure that _I_ want, and it's not as tedious as manually importing each new folder.
For me, the editing abilities of LR are good enough that a trial of PS (and PSE) sat idle because I never needed to edit in it.
Hope this helps,
James

Things to know before (and after) building a Mega 865

As I am seeing a lot of the same questions regarding the Mega 865 I created this document,
29-Oct-2004 Added Northwood benefits
29-Oct-2004 Emphasized NOT to use live update for bios update
Processors in general
Start with the processor, I would say get something around 3 gighz (give or take) which is quite affordeble. If you are going for a prescott, make sure you upgrade your bios to 1.3 (see below).It will run a bit hot (understatement) otherwise.
If going for northwood any version is ok I believe. When I chose mine I let $$$ descide, and the prescott was on sale. (If I would buy a CPU for the Mega again, I would most likely go for a Northwood this time). Before buying your processor make sure your processor is supported, you can find the supported processors here;
http://cweb.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=547&kind=4
Harddisk
As for Harddisk, I would suggest anything goes but take a serial ata since that is becoming the new standard nowadays.
When buying a HD larger than 130 Gig, make sure you install from a Windows XP SP1 CD (or higher) or divide your HD in smaller pieces. Otherwise you will not get a bigger partition than 130 Gigs.
DVD/CDROM
As for DVD/CD player, there is a special thread (see below) where everyone states if their DVD/CD player is working with the mega (there are some issues with some drives in HiFi mode, EVEN if they are MSI)
Mega PC barebones optical drive compatibility list
Memory
As for memory, get at least 512 Mb or 1024 Mb if you want to sit cosy. two sticks of DDR400 (a.k.a 3200) will do. Get a a-brand like Kingston, Samsung or look around on the forums what will work.
Installing Windows XP
Before installing Windows disable your USB devices, if you fail to do this you run the chance of not installing Windows XP on your C: drive (harddisk) and this will cause you trouble later on. After installation is complete you may enable them again.
Prescott processors & full size AGP cards
As for the GPU (Graphics card), this depends on what you are going to do with it. If you wanna try out at showshifting, and viewing get one with integrated TV tuner. Or use the on-board (some people are quite happy with it) and add a separate PCI tv tuner. If you wanna do hefty gaming (Doom3, Far Cry ... etc) you may want to get an better one. I'm quite happy with my Radeon 9800.
Please note; According to MSI, Prescott processors in combination with full-size AGP (add-in) cards are not supported. This is most likely a power issue since the full-size cards use a lot of power to run. Some forum members, stuborn as they are, are running with a full-size card.
Also note that you are installing a full-size card on your own risk in combination with a Prescott processor.
To calculate your estimated power supply take a look here;
http://www.jscustompcs.com/power_supply/
The following graphics cards seem to be working (please add to this thread if you have tested a full-size card with a Prescott processor so I can add it to this document)
Club3D Radeon AIW 9800 PRO
ATI Radeon ALL-IN-WONDER 9600 XT
ATI Radeon 9800 SE
AOPEN Aeolus 5900XT 128 Mb
Wise words from Stu:
If you do not want to take chances, go with a Northwood processor. Apperantly there is little perfomance difference between a Northwood and a Prescott processor, and the Northwood runs slightly cooler too.
Windows XP Service Pack 2 & Bios Update
When installing Windows XP with SP2 make sure you have the latest Bios version loaded (1.3) or install a Microsoft work-around fix. SP2 will not install without it, and you will have a hard time getting your system to work.
The Microsoft work-around fix can be found here;
http://support.microsoft.com/default.aspx?scid=kb;en-us;885626
The latest bios version can be downloaded here;
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=547&kind=4
To install the latest bios, I would advise against using live-update. Use one of the following options instead;
1) Burn a bootable CD-Rom also containing the bios and flash software, (note some of the original Win98 CD's are bootable to MS-DOS prompt)
2) Create a bootable USB-memory key
--- Download the HP util to create one
--- http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
--- Then create a bootable floppy on an other system or download from
--- http://www.allbootdisks.com/
--- (I used the Win98SE No ramdrive )
--- Then use the HP tool (on an system with an floppy drive) and enter a: as the source for booting,
--- and use the above created floppy.
--- Then copy the rest of the files from the a:\ drive (like autoexec.bat, config.sys etc) to the memory key.
--- ... and ... voila one bootable USB
--- make sure in the bios that the boot order of the USB key is before the Harddisk and your set to go.
3) Attach a floppy drive to the Mega 865
Bios update failure
Some people still manage to goof-up their bios, by doing the bios update from windows (winflash, live-update). I think there is only one road to travel when this happens, you have to attach a floppy drive to your mega. Then follow the following instructions (Award bios)
http://www.msi.com.tw/html/support/bios/note/boot.htm
Good luck !
PC-Alert
Do not use the PC-Alert version from the MSI website as this does not work together with your Mega 865, instead only use the one on the CD-Rom that was supplied. In general even the supplied PC-Alert has caused a lot of grief (Taking up resources, reboot problems ... etc). If you choose to install PC-Alert, at least remove it from your start-up folder where it is installed. You can always start it manually from the MSI menu in your Start menu.
A good alternative to Pc-Alert is Speedfan, this program should be able to spot your 2 temeperature sensored CPU fans. You can then connect these fans to the CPU temperature sensor and be able to tweak the RPM's according to your need. Speedfan 4.17 can be found here;
http://www.almico.com/speedfan417.exe
Temperatures
As these tiny PC's have very little space, it is quite normal for them to run a bit hot. Do not be alarmed to see CPU temperatures around 60-65 degrees when running on load (depending on your processor of course).
Wireless Network adapter
As for wireless internet, the mega865 has a built-in mini-pci nic (network card). which supports only the 11 Mbps data rate. I think you have to try it out and see how it goes, you can always upgrade to 54 Mbps. I would suggest to get a 54Mbps access point, so you can always upgrade if needed (54Mbps will also work with 11 Mbps) Some forum members have succesfully replaced their Wireless Network adapters with a 54Mbps one. The following network adapters seem to be working;(please add to this thread if you have tested a wireless 54Mbps network adapter so I will add it to this document)
Intel PRO/Wireless BG Network Adapter
6 Channel sound
I recently bought a 5.1 set from Soundblaster. You can connect the 3 connectors to the back of your Mega, then in the Sound util set it up for 5.1 surround sound and you are ready to go. Definately worth it !
Reboot problems
When you run into problems when the Mega reboots suddenly, watch out for a couple of things.
Always check your event/log viewer. It is in your configuration management, but the easiest way to start it is to enter the following in your Run or Command line entry
eventvwr /s
Check if you see red-dots in your application section or system section. Google the problems before dropping them on the forum ! (As most problems are not Mega related IMHO)
One problem I had was caused by BITS 1.5, I had to upgrade to BITS 2.0. (I think it was recently released by Microsoft-Update but I mention it anyway). Bits 1.5 caused my Mega to reboot.
LCD Display / Sound problems
If you have any problems where your front LCD display is not working or your on-board sound is 'missing' first try unplugging your mega from the power outlet (so completely powering down) for 2 minutes. If you still have problems, drop them on this forum.
LCD API ?
Alas, no external programs are available to 'drive' your LCD display. Nor will MSI release an API/Blue print on how to control it.
If you find anything missing here or have additional tips, please add them to this thread and I will update this document.
Good luck with your Mega !
Raymond

rkoppen i salute you
a truly glorious summing up of the main points asked about the Mega 865 in particular, although many points will invariably refer also to the other Mega series
if i can add my tuppence worth, anyone considering going for a powerful graphics card can always shy away from the prescott
i was reading an article just when the prescott core cpus came out and the review basically said that there wasn't really much performance wise between the new prescott and the older Northwood cores.
obviously newer prescotts have higher clock speeds now (3.2? 3.4??), but surely a 2.8ghz CPU is still going to be powerful enough to play the latest games!! (in conjunction with a top graphics card obviously)
is the extra temp increase surely worth the extra couple of hundred mhz?

Unable to view data in ADF calendar.

Hi,
I am working on an adf application that uses the ADF calendar component. I have created view object(with Entity Object) and have dragged and dropped the associated component from the data controls as an adf calendar on a jsf page. But 'm unable to run this application. The following exceptions occurs :
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlCalendarBinding$AdfmCalendarActivity.getStartDate(FacesCtrlCalendarBinding.java:1041)
     at oracle.adf.view.rich.model.CalendarModel.isActivityInRange(CalendarModel.java:189)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlCalendarBinding$AdfmCalendarModel._createCalendarActivities(FacesCtrlCalendarBinding.java:793)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlCalendarBinding$AdfmCalendarModel._getActvitiesListMap(FacesCtrlCalendarBinding.java:750)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlCalendarBinding$AdfmCalendarModel.getTimeActivities(FacesCtrlCalendarBinding.java:500)
     at oracle.adfinternal.view.faces.renderkit.rich.CalendarListRenderer.encodeAll(CalendarListRenderer.java:152)
     at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:1731)
     at oracle.adfinternal.view.faces.renderkit.rich.CalendarRenderer.encodeAll(CalendarRenderer.java:439)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:493)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:913)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:606)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$1500(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:734)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:637)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:493)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:913)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:606)
What I understand is that the activity or timezone is not setting properly. However, I'm not able to figure out which is incorrect?
Earlier it worked fine when an other view is used. Based on our requirements, I changed the view definition and few mappings. Now it is throwing this error.
Please help me.

Arun,
Thanks for the response.
The Jdev version is 11.1.2.0.0.
Regarding the VO's, both are different VO's. The first VO(which worked fine) is a simple query and is based on EO.
My Second VO (Based on a database view) is not based on EO. is it mandatory that the VO should be Enity based?
However, in my pageDefinition file, I had all bindings as:
<action IterBinding="JtfTasksCal1Iterator" id="ExecuteWithParams" RequiresUpdateModel="true"
Action="executeWithParams">
<NamedData NDName="startDate" NDValue="#{bindings.JtfTasksCal1.startDate}" NDType="java.sql.Timestamp"/>
<NamedData NDName="endDate" NDValue="#{bindings.JtfTasksCal1.endDate}" NDType="java.sql.Timestamp"/>
<NamedData NDName="tz" NDValue="#{bindings.JtfTasksCal1.timeZoneId}" NDType="java.lang.String"/>
</action>
<calendar IterBinding="JtfTasksCal1Iterator" id="JtfTasksCal1" xmlns="http://xmlns.oracle.com/adf/faces/binding"
ActionBindingName="ExecuteWithParams">
<nodeDefinition DefName="oper.model.uiview.JtfTasksCalVO">
<AttrNames>
<Item Type="id" Value="TaskNumber"/>
<Item Type="providerId" Value="TaskStatus"/>
<Item Type="title" Value="TaskName"/>
<Item Type="startTime" Value="ScheduledStartDate"/>
<Item Type="endTime" Value="ScheduledEndDate"/>
<Item Type="tags" Value="TaskStatus"/>
<Item Type="custom" Value="ScheduledEndDate"/>
<Item Type="custom" Value="ScheduledStartDate"/>
<Item Type="custom" Value="TaskId"/>
<Item Type="custom" Value="TaskName"/>
<Item Type="custom" Value="TaskNumber"/>
<Item Type="custom" Value="TaskStatus"/>
<Item Type="custom" Value="TaskType"/>
</AttrNames>
</nodeDefinition>
<providerDefinition IterBindingName="JtfTasksCal1Iterator">
<AttrNames>
<Item Type="id" Value="TaskStatus"/>
<Item Type="displayName" Value="TaskName"/>
</AttrNames>
</providerDefinition>
</calendar>
Is there anything missed here?
And there is no Timezone specified in trinidad-config.xml. If the timezone is not specified here, then how it picksup the timezone?

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

UWL CATS time approval error "No data exists that needs to be approved"

Hi all,
We approve CATS working time through SAP portal UWL. The user can see the workitem in her UWL inbox, but got an error u201CNo data exists that needs to be approvedu201D when he tried to execute the workitem. But the user is able to execute the workitem using Business workplace in ECC. We are using the standard UWL application.
This happens only to CATS time entries for certain type of employees (for example, the employees who do not report directly to the approver).
SAP Portal 7.0
SAP MSS 600 SP19
SAP UWLJWF 7.00 sp23
SAP ECC 6.0
Here is what I have found from my trouble-shooting. When I test (preview) the UWL iView, it seems to be working fine. But when I call up the iView from the portal MSS role, I got the error message u201CNo data exists that needs to be approved.u201D
Please let me know if you need more information.
Thank you,
Qi

I have found that the workitem ID is not passed to the CATS approval web dynpro program. Here is what is in the Item Type configuration XML. Is there anything missing?

    <ItemType name="uwl.task.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.OpenTasksTimeApp" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria externalType="TS31000007" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="CatManagerApprove"/>
            <Property name="WebDynproDeployableObject" value="sap.com/msscatapproval"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="true"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
    <ItemType name="uwl.forwardedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.ForwardedTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.futuretask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.FutureTaskTimeApp" defaultAction="viewDetail"/>
    <ItemType name="uwl.completedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.CompletedTimeApp" defaultAction="viewDetail"/>
Thanks,
Qi

Anything missing?

Similar Messages

Maybe you are looking for