Anything to worry about?

Hi for the last couple of days my connection has been slowing down quite a lot. I've had bt broadband for about 20 days now the first 10 days was great quick connection and low pings (great for online gaming). I've looked at the router settings and I really don't understand it
would be really grateful for any advice
here are the stats
cheers Steve
Line state
Connected
Connection time
1 day, 4:36:52
Downstream
8,128 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
12.3 dB / 27.0 dB
Line attenuation (Down/Up)
6.0 dB / 5.5 dB
Output power (Down/Up)
9.8 dBm / 12.1 dBm
Loss of Framing (Local)
12
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
3356 / 0
CRC Errors (Down/Up)
2 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
3

just to help with comparisons.
Line state
Connected
Connection time
0 days, 4:26:32
Downstream
16,488 Kbps
Upstream
952 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
5.3 dB / 4.8 dB
Line attenuation (Down/Up)
27.5 dB / 14.9 dB
Output power (Down/Up)
21.1 dBm / 12.4 dBm
Loss of Framing (Local)
11
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
26606 / 259
CRC Errors (Down/Up)
9 / 2147480000
HEC Errors (Down/Up)
nil / 25103
Error Seconds (Local)
55
i have no idea about errors though

Similar Messages

Is failure to install "N-Mon.kext" anything to worry about?

When I've done the latest update I get the message (appearing twice) that N-Mon.kext can't be installed and I should contact the vendor.
This has happened each time I've updated on two separate bootable partitions I use.
It has not happened on a fresh OSX install on a third partition that had no additional software and where I went straight from 10.6.3 to 10.6.6, only on the ones that had a version of 10.6.6 that was downloaded recently and lots of software.
Is it anything to worry about..? Everything (so far) seems to work ok.

Uninstall VUZE
http://discussions.apple.com/message.jspa?messageID=12119966

Is this anything to worry about?

Using Javascript to apply XSLT when importing XML [using Mac OS 10.6.4, CS5 7.02], and all seems well. But when I "sort" using the XSLT, I get the message "International sorting unavailable on this system - sorting natively. Line: 7, Column: 12".
It seems to work OK, but that looks like an error message. Is it anything to worry about? Is there any easy way of avoiding it?

If it appears to work, then I shouldn't worry too much about it. You can try adding a "lang=" attribute to the xsl:sort command, so the XSLT processor won't worry about what you mean (see http://www.w3schools.com/xsl/el_sort.asp). I think the message is to remind you that there might be a difference between international and 'native' (system?) sorting.
The lang= attribute accepts international language abbrevs such as "en", "de", "fr", "en-GB", and "en-US".

Strange crash with shrill noise - anything to worry about?

A few minutes ago I was moving my cursor across the screen and accidentally clicked on the garageband icon in my dock, which I haven't used in over a year. The program goes to load and while it's loading, my computer starts emitting this loud, shrill sound while freezing up. It allowed me to open a few new windows but as I was trying to force quit Garageband (which eventually loaded up), the computer froze. I turned it off and it seems fine now but it was a strange incident...anything I should be worried about now?

Hi Jiggymike!
Run Repair Disk.
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
You should also run the Apple Hardware Test.
Post the results.
ali b

IPod makes clicking noises, but works normally. Anything to worry about?

As i've been using it i've noticed my ipod has been working fine for the longest time, but reciently there are 2 things I notice that happen occasionally.
1. Once in a while when I plug an ipod into the comptuer it freezes, though this hasn't happened in about a month now.
2. Sometimes I hear clicking sounds like what you hear a lot on like older mac laptops that usually occurs when the mac has to process a lot (kind of?)anyways reciently I hear that on my ipod but it hasn't before.
So I just wanted to know is there anything I should worry about that could happen in the future or will it likely work just fine?

ive got excatly the same problem, my pod (also had it 3yrs 30gb 5th generation) has started making the clicking noise, i get the apple symbol appear or the sad looking face, im unable to restore it and i think the sad face may mean its a hardware problem from wot ive read on the online support. but i dont know what to do or where to send it to be fixed or if it can be fixed, if you find out how it can be fixed please let me know its doin me head in.

Under "About My Mac"-"Memory", it says " ECC:Disabled" Is this anything to worry about?

I purchased this MacBook Pro from BestBuy as new. I never did any upgrades to it or anything...
Memory Slots:
ECC:          Disabled
BANK 0/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80AD
Part Number:          0x484D54313235533654465238432D47372020
Serial Number:          0x2074D6AF
BANK 1/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1067 MHz
Status:          OK
Manufacturer:          0x80AD
Part Number:          0x484D54313235533654465238432D47372020
Serial Number:          0x2044D6AE

ECC is a different kind of RAM and it is not as fast. ECC is supposed to be disabled in your laptop.

I get hieroglyphics in the top bar of he screen rather than "Firefox - Mozilla Firefox". Anything to worry about?

On some occasions, I get a series of hieroglyphics in the top bar on my web browser, rather than "Firefox - Mozilla Firefox". I'm concerned this may be linked to a virus. Should I be concerned?
== This happened ==
A few times a week
== I launched Firefox

If you see CJK (Chinese/Japanese) characters on the Firefox title bar or the Windows Taskbar then that can happen if Firefox switches to UTF-16 encoding for some reason.
The ''RealPlayer Browser Record Plugin'' extension (Tools > Add-ons > Extensions) has been reported to cause that issue.
Be sure not to get confused with the RealPlayer plugin (Tools > Add-ons > Plugins) that plays media files.
The extension adds some extra features like saving media files.
You can disable/remove the ''RealPlayer Browser Record Plugin'' extension in the RealPlayer Preferences (RealPlayer: Tools > Preferences > Download & Recording)
See also [[Troubleshooting extensions and themes]]

Is this disk diagnostic anything to worry about?

I'm running a 2011 27" imac. I keep getting this Verify Disk alert on a pretty regular basis. I don't honestly detect any performance issues with the computer. Should I be concerned aboutn this error. I do repair it, but it keeps returning.
Any advice would be welcome. Thanks.

You cannot repair the startup disk from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

802.11n anything to worry about

i was just thinking is the intel core 2 duo able to pick up 802.11n wireless, i was thinking of buying the new AirPort Extreme Base Station.Any help?????

To the best of my knowledge, Apple has not yet released or announced a software update for any of the 802.11n-equipped Macs that will enable "n". It's probably just a matter of time, but if you have a working wireless router now, I'd suggest waiting until such an update is available before you buy a Airport Extreme. That way you can be certain your system can take advantage of it.
Note, of course, that unless you're file sharing with other 802.11n devices on your local network or with wired (Ethernet) devices, having the faster wireless router probably won't do you any good. All wireless routers are faster than the fastest home Internet connection, so an 802.11n wouldn't connect to the Internet any faster, if that's part of your reason for upgrading.
Regards.

I'm worried about my PS4 Preorder

I preordered in June,and I played the full 400 dollars. I can't go to the midnight launch and will have to pickup my PS4 after school tomorrow around 3:00. The thing is I think my Best Buy will have sold my PS4 by then. The console is launching in a few hours. And I won't be able to get mine until after school tomorrow. Hopefully they won't accidentally sell mine. Or hopefully they haven't forgotten I preordered. I still haven't got a call or a e-mail. Hopefully all goes well.

Hello Damar-
I’m sure that you can barely contain yourself today in anticipation of picking up your PlayStation 4 after school. Hopefully you remember to sleep and eat this weekend as well!
All PS4 pre-orders should be held for 8 days from the date of release and we did receive enough system to cover all of our pre-orders, so I don’t believe you have anything to worry about. Your system should be waiting for you to pick up and take home today when you get to the store.
Have fun!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

So if i get snow leopard, and B4 i began do i have to back-up or jus let it run and not worry about anything?

So if i get snow leopard, and B4 i began do i have to back-up or jus let it run and not worry about anything?

Make sure your Mac meets Snow Leopard's minimum requirements.
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Mac OS X v10.5, v10.6: How to back up and restore your files

Do I need to worry about this?

It has been an interesting few months with my one year old 13" MBP. Lots of spinning beach balls followed by a hard drive crash. Apple was quick to replace the hard drive. And as I had everything backed up on Time Machine I was able to quickly restore everything.
All was good for a few months until the beachballs, freezes, and finder crahes began again. Made another trip to the Genius bar where they thought I might have re-downloaded a corrupt file from Time Machine. They cleaned my temp files and caches and things seemed to work well in the store.
When I returned home I had the same issues. They had prepared me for this. So a system restore, a re mount and re start of time capsule and everything seems to be working well. Speedy, no crashes, no freezes.
The issue is that I wanted to double check so I ran disk verify and permission verify on the disk utility. To my surprise it came back with a LONG error log as below. So long, I could not get it all into this post. But it seems like a recurrent message. Do I need to worry about any of this? What should I do next, if anything? Thanks in advance for your response.
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 624512 instead of 624514)
Invalid volume directory count
(It should be 172781 instead of 172779)
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Verify permissions for “Macintosh HD”
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAssistant.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDocument.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUDrives.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUStatisticsPanel.nib/keyedobjects.nib ", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTaskSheet.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUTasks.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUWirelessPanel.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/APPanels.nib/keyedobjects.nib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AUFirmwareDownloader.nib/keyedobjects.n ib", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortAssistant.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortErrors.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortSettings.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortTimeZones.strings", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h elpindex", should be -rw-r--r-- , they are -rw-rw-r-- .
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be 0, group is 80.
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AirPortUtilityHelp/AirPortUtilityHelp.h tml", should be -rw-r--r-- , they are -rw-rw-r-- .

Scott Adelman wrote:
The issue is that I wanted to double check so I ran disk verify and permission verify on the disk utility. To my surprise it came back with a LONG error log as below. So long, I could not get it all into this post. But it seems like a recurrent message. Do I need to worry about any of this? What should I do next, if anything?
Verifying volume “Macintosh HD”
Invalid volume file count
(It should be 624512 instead of 624514)
Invalid volume directory count
(It should be 172781 instead of 172779)
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
You definitely need to repair your disk. If you can, boot from something else, such an external disk or the system discs that came with your Mac. You can also cause the disk to be repaired by booting into "Safe Mode": http://support.apple.com/kb/ht1564 . If that process can't repair your disk, you may need one of the more-powerful disk utilities such as Disk Warrior.
Verify permissions for “Macintosh HD”
Group differs on "Applications/Utilities/AirPort Utility.app/Contents/Resources/pl.lproj/AAUAdvanced.nib/keyedobjects.nib", should be 0, group is 80.
You can ignore most permissions repair messages:
http://support.apple.com/kb/TS1448

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?

If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account. It won't do anything to the data on your phone or in your iCloud account. If you don't need to backup you can delete it. (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup. Then your phone will back up to your computer each time you sync it with iTunes.)

What do I need to worry about when running a VI for an extended amount of time?

Hi, I'm fairly new to LabVIEW as a program, but not new to programming as a whole.
I'm attempting to build a VI which will, hopefully, be run continuously and take data for weeks-months at a time.
I've never built a VI, let alone a program, which will be run continuously for so long, and so I'm unsure as to what I should be concerned about. I'm looking right now at optimizing, as best I can, memory allocation, algorithms, etc. but I suppose my main question is: What should I really be worrying about when programming a VI which will be run continuously for an extended period of time?
Solved!
Go to Solution.

In the structure of your VI's, be certain that you are not repetively creating things such as references to queues, or file references, or DAQ tasks, or anything without closing them. I was working on one application where a DAQ task was getting created every loop iteration and not being closed. It crashed the PC hard with a blue screen of death after about 20 minutes of operation, through debugging and before I found the cause, I saw I had about 80,000 to 100,000 iterations of a loop fairly consistently before the crash.
If this loop had run at a slower rate, it might have taken days or weeks before the PC would have crashed. It would have seemed infrequent and would have taken longer to debug because I would never have seent the pattern. If it takes a few failures before you discover the problem, it is a lot quicker to find the explanation after a few failures at 20 minutes per failure as opposed to 20 days per failure. The problem was eventually found in a subVI several layers down and fixed.
So if you pay attention to these things early enough, then hopefully they won't pop up and bite you weeks or months into a critical run of the program.

Something to worry about? - Security issue?

iMac
OSX 10.10.1
Transfer of files from a USB Flash Drive
1) - Transferred file from one USB FlashDrive to another USB FlashDrive.
2) - Attempted to eject USB devices - Window appeared stating Finder is using device (it wasn't!) - eventually they were ejected.
3) - Spotlight Search identified a number of MAIL & MESSAGE items (recent emails with subject details)
4) - Could not open these - when I attempted to I got this on the right side of the search window :-
5) - a four digit .emix file (which could not be opened) and below this in grey were the initials sw vers -
underneath this was the message Created Application <DNL>
6) - Attempting to open the .emix file produced a window with the message :-
You do not have permission to open the document " .emix".
Contact your computer or network administrator for assistance..
Has a DNL application been created?
What does this mean if it has?
And ... Is it something for me to worry about?

illusory wrote:My logs on my system check out well. The connection attempts I mentioned are all from my router's log. How can I check to make sure there isn't anything running listening in on those ports? What can I do to disable these services if necessary?
As a device, which faces internet, I guess it's normal for the router to detect some connection attempts either by mistake, or from port scanners, kids, etc...
The services run on your machines, not on the router. The only one on the router should be either telnet or httpd for configuration. In order to protect your internal network, you only need to disable remote adminitstration on the router (or whatever it is called in your case, that is the router should be accessible for administration only from the LAN) and port forwarding (also on the router, so that requests are not forwarded to the LAN). Enjoy

Anything to worry about?

Similar Messages

Maybe you are looking for