Anyway to get more than 2GB Ram in my MDD Dual 867?

Didn't know if there was a workaround to get my MDD G4 to recognize 1GB memory modules.
I know that there are some workarounds for other issues like big HDs on the pre MDD Powermacs, so I was hoping there might be a workaround for this.

For typical use, yes-2 gigs is plenty. There are certain factors,though, that would necessitate a higher volume of memory, such as using Final Cut Studio or other pro level applications. Of course the more non-pro apps you a running, the more memory you will use but most apps only use a few megabytes each and there is a portion of your hard drive that is allocated for virtual memory anyway.
I hear that the Mac Pro needs more memory to run smoothly. In the Mac Pro thread there are those who constantly complain about how slow their Mac Pro's run with only 2 gigs of memory while 4 gigs is considered the "sweet spot". Maybe it's a hardware thing?
I am currently only running 756 MB and everything seems fine, FCE would probably run a little more smooth (I hope) when I eventually get around to upgrading to 2 gigs, but outside of that every works fine.

Similar Messages

  • More than 2GB RAM 1st gen Macbook

    Is there any way possible to get more than 2GB RAM in a 1st gen macbook? I have one 2GB stick in right now but if I try to put even the old 512MB in the other slot I get no video. I also tried two 2GB sticks as well. I'm pretty sure the answer is no, but it doesn't hurt to ask and have hope
    I have a dell inspiron with Core2 and it wouldn't see 4GBs until I pulled the battery on it. maybe there is a trick for the macbook like that?

    I was hoping since it sees one 2GB stick it may like 2? It was a long shot. I just got this one used, so I'm stuck with it for a while. It runs fine with 2GB though.

  • Adding more than 2Gb RAM to MacBook Pro

    Do you guys know of any way to put more than 2Gb RAM in an Intel 17" MacBook Pro?
    Model Name: MacBook Pro 17"
    Model Identifier: MacBookPro1,2
    Processor Name: Intel Core Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP12.0061.B03
    SMC Version: 1.5f10
    I bought this when the 17" models first came out, and have been disappointed in it ever since (I broke my rule of NOT buying the first generation of something). As time has passed, the main problem is the 2Gb limit for RAM. That's NOWHERE near enough, and shame on Apple for that limitation. If there were some way, even a non-standard way, of adding more RAM, I could get reasonable performance from this computer. As it is, this has been a wasted $3600 investment. whew!
    Any help or ideas would be appreciated. Thanks! Feel free to email bruce at dbsdesigngroup.com

    That's possible...actually likely. I'd love for that to be the case because I could fix it. ::Grin:: It's been this way since I first got it. When it arrived with just 1 Gb RAM, it was virtually unusable. I have a few apps as startup items, but they're just Firefox, Entourage, iNotepad, Linotype Font Explorer (with very few fonts activated), and Stickies. That shouldn't affect things much.
    My needs are to use Photoshop, Illustrator and GoLive at the same time, with MSWord, Firefox and Entourage open as well. After the first bit of usage, I end up with 4-6 pageouts and a VERY slow computer. While it's doing the pageouts (which take quite a while), or switching between apps, it's very slow. And it's also extremly slow when Spotlight is indexing, so I disabled that.
    I'm just not sure what it might be...nothing in Activity Monitor seems like it would be a culprit. Even in Safe Mode the problem is very evident.
    I'll keep exploring and hopefully find something that will make this machine more viable for my use. I really appreciate the input greatly.

  • Satellite L40-12X - More than 2GB RAM?

    Hello,
    I was wondering if there's any solution how to enable support for more than 2GB of RAM on Satellite L40-12X notebook? I'm running Vista 32-bit, but every additional MB counts...
    PeterA

    At the moment, your laptop can run up to 3GB Ram. However, it will not make much differences as the chipset X3100 cannot do as much as we expect.

  • Firefox uses more than 2GB RAM

    Hi,
    I'm using HP laptop with OS Windows 7 Professional edition.
    I observed in the task bar that firefox consumes more than 2GB of ram just with 3 or 4 tabs.
    Could you please let me know what are the memory tweaks or steps to reduce the memory consumption???
    Thanks in advance for any help.
    Regards,
    Kathir

    Memory usage is influenced by the type of site you use and the additional software Firefox may be using
    * see [[high memory usage]]
    Do your tabs include for instance massive webmail databases, or High Definition video.
    If you key into the location bar ''about:memory'' you will open an interactive page about memory usage, that should be more informative than the Windows task Manager.

  • GeForce 7300 GT with more than 2GB RAM?

    I had a lot of crashes with my MP and had original 2x512MB & Kingston's 2x1GB installed.
    I contacted Kingston's support when Rember caused kernel panic every time I tried to test memory with it.
    They said that it is "known issue" that 7300gt does not work with current drivers with openGL applications and more than 2GB memory installed.
    But my MP kept having kernel panics with rember (and with lots of other applications)without any openGL involved. I even ran Rember with Finder closed.
    With only 2x512 or only 2x1 installed everything seems to be fine, except that there's not enough memory to use FCS efficiently.
    Anybody had same problems?
    Is this really "known issue"?
    If it is, when is solution available?
    MP+GF7300gt have been on the market over half a year now.
    Any links and references would be appreciated.
    I didn't find anything from apple's website and will be calling apple's support tomorrow...

    I have 4 GBs installed in my Mac Pro w/7300 card. No problems whatsoever.
    For best performance from quad-channel interleaving you may want to install either six additional 512 MB DIMMs (four in Riser A and four in Riser B) or two more 512 MB DIMMs (in Riser A) and four 1 GB DIMMs (in Riser B.)
    In your current configuration I believe you should have two 512 MB DIMMs in Riser A and two 1 GB DIMMs in Riser B.
    See Memory (FB-DIMM) Replacement Instructions.

  • Mac Pro 2.66 crashing with more than 2GB ram

    I curently have a base config of 1GB ram (2 512MB chips), the systems runs fine, I then added memory in various configs and it always kernel panics when I exceed 2 GB. System runs fine until i try something memory intensive like Aperture or Photoshop.
    tried
    4 x 512MB chips (2GB) = perfect
    6 X 512MB chips (3GB) = crash
    2 x 512MB and 2 x 2GB (5GB) = crash
    2 X 2GB (4GB) = crash
    I have tried only riser 1, still crashes even with only the 4GB running. All memory is genuine apple and passes the hardtest CD.
    Any help much appreciated
    cheers

    Agreed.
    If you cannont get the memory to fail when only one or two pairs is in a given riser then it will be very difficult to diagnose and you'd have to suspect either a riser or mainboard problem.
    You do know that memtest will only test up to 2GB unless you buy the $0.99 version 4.14 though right? Lower versions shouldn't KP though, should just allocate 2GB and test.
    If it fails in both the following combinations:
    Riser A - 2x 512
    Riser B - 2x512, 2x 512
    Riser A - 2x 512, 2x 512
    Riser B - 2x512
    then I suppose I'd be suspecting hardware failure on the motherboard. BY the way, both risers boards are identical, you can swap Riser A for Riser B and still have a working system if it helps in your tests.
    I just went through the same thing, fortunately I had only 2 pairs (2x1GB) to work with...so I labelled the chips ABCD and worked the combinations through the risers A and B to determine that failure followed a given FBDIMM....after I'd done all this and found the suspected FBDIMM, I powered up the machine with the cover off for a change and found the red lights...did I feel silly then

  • More than 2GB Ram on Qosmio G20 (PQG20E)?

    I tried to install 4GB Ram on an G20-106 but not even the BIOS would load. Newest BIOS-version (v1.40) is running. Is there really a 2GB Limit on this machine, and if so, why?

    Hi mate,
    yes, the machine is only able to handle 2GB of RAM because its an chipset limitation. The chipset is an 915PM from intel and you can read about the limitation when clicking on the following link: http://www.intel.com/Products/Notebook/Chipsets/915PM/915PM-overview.htm
    and checking the "Technical Documents" where the Datasheet states also a RAM limitation of 2GB.
    Hope I was able to clarify your mind. :)
    Greets

  • About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc.  It lasts for about 15 seconds and then goes away.  This seems to happen once every minute or two.  I have more than enough RAM/Power.

    About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc.  It lasts for about 15 seconds and then goes away.  This seems to happen once every minute or two.  I have more than enough RAM/Power, etc.  About every other time I use FCPX it will spontaneously close (typically when editing a title).  None of these things were happening previously.  I have lots of projects that I store on Promise Pegasus drives via Thunderbolt.  I only keep a few projects and the associated events open in FCPX at a time, otherwise I use Event Managaer X to keep track of them.  Can anybody give me any suggestions as to why this is occurring and what I can do to remedy it?  I have the latest version of FCPX as far as I can tell.  This is driving me mad and costing me significant time while editing.  By the way, I am doing just basic editing.  Essentially trimming, cutting and adding some transitions and a few title screens.  Thanks in advance for your help.

    These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
    I would try clearing caches and do an overall maintenance with an utility like OnyX.
    Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves.

  • Adding more than recommended RAM?

    I have a late 2006 model Macbook (13.3 inch Black) running Leopard (Mac OSX 10.5.8). Specifics: 2GB 667 MHz DDR2 SDRAM. It is running slowly and freezes/crashes programs (notably MS Word 2008 v. 12.3.5 and iTunes 10). Thinking about getting 4GB of RAM to put off having to buy a new computer. But Apple does not recommend more than 2GB of RAM for this model. http://support.apple.com/kb/HT1651#link3. But has anyone else upgraded the RAM and been fine?
    I need something that can run iTunes, MS Office, and iLife reasonably well with a minimum of freezing or crashing. I am a music student finishing up my doctorate and need these programs to work well! Perhaps it's just time to upgrade to a new computer? My 2006 Macbook is still plugging along, so I'm hesitant to upgrade unless I have to...
    I have 39GB free and 72GB used. Most of my information is stored on my 1TB WD external.

    Here's a screen shot of the activity monitor - I'm sure it's very high because I'm using Sophos to scan for anything untoward. I'm not sure how to do a crash dump, though. I can get into Library/Logs/CrashReporter and see individual logs. But the last log is from 3/1...and iTunes alone has crashed probably at least 5x today.
    Would 3gb give enough space to the computer to make it worth the effort?

  • Problems deploying Windows 7 x64 computers with more than 8GB RAM

    SCCM 2012 R2 CU1
    Windows 7 x64
    We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
    - we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
    The error shows in 3 different ways – depending of the computer model.
    1) BSOD – STOP 0x000000F4. Disk error.
    2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
    3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
    For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently  fail every time after the error has begun. If we reduce (remove physically)
    the memory to max. 8GB of RAM, they successfully run the Task Sequence.  We get the above errors on both Lenovo and HP machines with more than 8GB. 
    I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
    error on both m93p and M83. At least not the BSOD on the M93p ;-)
    Tried setting  SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
    the same problem.
    Investigating the smsts.log on a computer with the 0x87D00269 error.
    Policy Evaluation failed, hr=0x87d00269 InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
    MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
     Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
    Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
    you have not previously used.
    Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords.  And again why only on computers with more than 8GB RAM.
    Anyone else had problems rolling computers with more than 8GB og RAM?
    Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
    updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
    Why does it only affect machines with more than 8GB RAM?
    How to get rid of the 0x87D00269 error?
    Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
    Any help or hints would be appreciated!
    Thanks
    Anders

    We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
    Machines with >4GB of RAM
    Lenovo ThinkPad T540p failed applying drivers with 80040005
    Black screen/white cursor issues intermittently
    No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
    Daniel Ratliff | http://www.PotentEngineer.com

  • If my Mini is running 64 bit can I run more than 4Gb RAM?

    I hear ALL over the place that the mini can not use more than 4Gb RAM.
    Is this a hardware limitaion of the motherboard/Processor?
    OR
    Is this due to the fact that mini's run at 32 bit?
    You can now easily run modern mini's at 64 bit:
    http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
    So who knows the REAL answer?
    Thanks -
    skibum

    Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
    If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

  • % CPU is consistently very low, never reaches over 30%. Nothing gets more than 5% anytime!

    I used to have the problem of over 100% CPU usage all the time, but the last few months, it's been the opposite problem. %CPU is never above 30%. Individual apps never get more than 10% ever, and it's more like 3-5% at any time. System and User apps are getting the same treatment.
    I see Index running constantly, and all applications hang after every click or swipe.
    I've verified and repaired permissions numerous times. Every time, there seems to be these little errors.
    What could I try?

    Problem description:
    CPU % Usage is very low all the time. Even when I have many operations running, and many of them are usually high-CPU users.
    This is the EtreCheck profile after having rebooted 2 times. It seems like it is running a little better now, but it still took 15 minutes to boot up. But apps are now running sometimes in the double digits!
    EtreCheck version: 2.1.8 (121)
    Report generated March 30, 2015 at 6:06:14 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Click the [Adware! - Remove] links for help removing adware.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro7,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Check Battery - Cycle count 389
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            LED Cinema Display 1920 x 1200
    System Software: ℹ️
        OS X 10.9.5 (13F34) - Time since boot: 0:14:8
    Disk Information: ℹ️
        TOSHIBA MK2555GSXF disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (30.88 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Toshiba External USB HDD 500.11 GB
            EFI (disk1s1) <not mounted> : 210 MB
            Beechwood Videos (disk1s2) /Volumes/Beechwood Videos : 499.76 GB (13.83 GB free)
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Inc. Display iSight
        Apple Inc. Display Audio
        Apple Inc. Apple LED Cinema Display
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Adware: ℹ️
        Geneio [Adware! - Remove]
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [loaded]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.rim.BBLaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.rim.BBDaemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
        [running]    com.Installer.completer.download.plist [Click for support]
        [loaded]    com.Installer.completer.ltvbit.plist [Click for support]
        [loaded]    com.Installer.completer.update.plist [Click for support]
    User Login Items: ℹ️
        GrowlHelperApp    Application  (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
        GrowlHelperApp    UNKNOWN  (missing value)
        iTunesHelper    UNKNOWN Hidden (missing value)
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        Default Browser: Version: 537 - SDK 10.9
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.0.788 - SDK 10.6 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewer: Version: 9.5.4 [Click for support]
        GarminGpsControl: Version: 2.9.2.0 Release [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 7 Update 55 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        WebEx: Version: 1.0 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Growl  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 218.32 GB
        Destinations:
            Data [Network]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 218.32 GB X 3)
            Time Capsule backup [Network]
            Total size: 1.40 TB
            Total number of backups: 58
            Oldest backup: 2014-11-13 05:01:04 +0000
            Last backup: 2015-03-30 00:57:07 +0000
            Size of backup disk: Excellent
                Backup size 1.40 TB > (Disk size 249.20 GB X 3)
    Top Processes by CPU: ℹ️
            12%    WindowServer
             8%    repair_packages
             5%    Microsoft Entourage
             1%    SystemUIServer
             1%    Disk Utility
    Top Processes by Memory: ℹ️
        653 MB    firefox
        232 MB    mds_stores
        149 MB    repair_packages
        137 MB    com.apple.IconServicesAgent
        77 MB    Finder
    Virtual Memory Information: ℹ️
        3.99 GB    Free RAM
        2.43 GB    Active RAM
        1.13 GB    Inactive RAM
        769 MB    Wired RAM
        601 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 30, 2015, 05:48:25 PM    Self test - passed

  • How do I get more than one signature option in Fill and sign?

    How do I get more than one signature option in Fill and sign?

    Hi,
    Are you trying to place more than one signature on a PDF document?
    Please explain the workflow.
    Regards,
    Anand

  • How to get more than 300 results for a search

    Hi all,
    When we search for something in a peoplesoft, we get 300 default results right.
    Is there a way we can change that to 500 or 600 or any.
    Please help me.
    Thank you,
    Bye.

    I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
    Please help me.
    Thank you,
    Bye.

Maybe you are looking for

  • Opening pdf files in 10.8

    I can't open pdf files in Mountain lion. I followed all the old posts but none helped and most were a year old. I downloaded the lated reader from Adobe tonight and that didn't help either. No other issues with 10.8, I really like this new OS, but th

  • Error code U43M1D207

    I am having trouble installing Photoshop Camera Raw 7.4 Update due to error code U43M1D207.  What needs to be done to resolve this issue?

  • Is it possible to use a sparsebundle file on a locally attached disk?

    I'm using a basic Drobo to store all my media (iTunes, iMove Events etc.) and would also like to use it for Time Machine, without Time Machine claiming all of the available space therein. Partitioning the Drobo is pretty much out of the question, I t

  • Unable to merge contacts in iOS 5

    I recently upgraded to Lion and also purchased an iPhone 4s. I tried syncing my contats through itunes and via the cloud, but it would not merge only overwrite. Any suggestion to get my iPhone contacts to merge with my Lion address book??

  • Open default program of a document

    I watched some videos in Adobe MAX and am excited about the new features to be released in AIR 2. AIR 2 will allow a file to be opened by the system default program (e.g. .doc by MS Word), but - to my understanding - AIR 2 doesn't fire an event when