Anyway to prevent spaces from looping

I have three spaces set up horizontally. Is there any way to prevent spaces from jumping from say space 3 to space 1 when I try to shift to the right?

Actually there is a hidden option to "not wrap". To access the option, Download the utility Tinkertool from here:
http://www.bresink.com/osx/TinkerTool.html
Look in the applications tab / spaces.
Regards

Similar Messages

My screen has a gouge in it and it starting to spiderweb. Is there anyway to prevent it from getting worse?

I went to use my iPad mini and the screen has a gouge on the side of it. It is starting to spiderweb. It is only a small spot currently. Is there any way to keep it from getting worse?

No, and it would be a REALLY good idea to make a backup of your content as soon as possible, then take the iPad to an Apple store genius bar for an out-of-warranty replacement. If you backup to iCloud the techs can restore your content while you wait.

How to prevent Spaces from creating a new session after logging out

Hi,
I'm using WebCenter Spaces (11.1.1.4), and I notice that the user is redirected to the landing page after logging out which causes a new HTTP session to be created. I'd like to avoid this behavior, and I was told that this could be done by creating a custom logout page with pure HTML and redirect the user there upon logout. How do I go about doing this? I couldn't find anything related to this in the documentation.
Thanks,
Robert

What's wrong with a new session?
When you logout, the current session will be destroyed so it's just normal that he creates a new webcenter that does not contain a user credential.

HT1660 Whenever my computer does a hard shutdown I lose all of my playlists and have to reimport them, is there any way to prevent this from happening?

I had to hard reboot my computer again, which is a rare occurance and the previous time and this time I noticed that all of my music from CDs was missing and all of my playlists were gone. I can go back and reimport them, but that takes a long time because I have over 100 playlists because that is how I like my music organized. Is there anyway to prevent this from happening and is there a way to speed up the process by transferring them directly from my ipod touch? Thank you.

Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden

Bought apple iphone 4s 16gb in error from family member, but wanted 32gb. Is there anyway to increase space, as planning to use a lot for music and photos

Bought iphone 4s 16gb from family member in error. Wanted 32gb as present for daughter
Is there anyway to increase space as need lots for photos and music, other than deleting stuff!!

harryham12 wrote:
Bought iphone 4s 16gb from family member in error. Wanted 32gb as present for daughter
Is there anyway to increase space as need lots for photos and music, other than deleting stuff!!
No.

Prevent iChat from yanking me out of one Space and into another

Using Spaces and working in a separate Space from where I have an open iChat window it's incredibly annoying that when I receive a chat message from someone iChat will immediately switch Spaces on me...even if I'm in the middle of typing or drawing in another space. Is there any way to turn this off?!? The red badge over iChat's icon is enough! I don't need to be yanked away from what I'm working on...
Thanks!

If you set iChat to Every Space it will show up no matter what space you're in, so it won't have to move you between spaces. The Chax plug-in lets you hide the buddy list automatically when iChat is in the background, so it won't get in your way (since it would always be there no matter what space).

Every time I add a page to my documents, my buttons reset. How can I prevent this from happening?

I am using InDesign CS5. I have a very large document (698 pages) that has several buttons saved on each page.
I used the automated Table of Contents feature to create all of the destinations. Using the buttons dialog box, I select the specific page the document needs to go to.
I need to add pages to this document, but every time I add a page, all of the bookmarks default to the very first link in the list. How can I get prevent this from happening?
If I can't stop this from happening because I used the TOC feature to create the destinations, how can I quickly and easily move forward to add pages to the document. These pages will be inserted throughout the document.
Thank you.

Put on shoe.
Take one shoe-lace in each hand.
Lay them across each other.
Then place one of them under the first.
You now have the first fasting.
To make the loops, again take each shoe-lace in each hand.
Fold one of them double into a loop and hold the loop with the other hand.
Take the second shoe-lace and fold it around the loop and insert the second loop in the space you just created under the first loop.
Fasten the loops by dragging them in opposite directions.
How did I do? Clear enough? (English is not my first language by the way).

How do i prevent Dreamweaver from changing all of my pages?

Hello, thank you in advance for your help!
I am using Dreamweaver CS5.5 and have downloaded a free CSS template (www.freecsstemplates.org).
I created my home page and moved onto the second page - as i wanted the same theme i simply copied and pasted the HTML code and CSS code into a new document, when i made changes to the layout on the second page, the same changes were applied to the home page.
Is there anyway i can prevent this from happening?
Many thanks!

Let me begin by saying I'm not a huge fan of these templates. The code is somewhat bloated and it's not even an HTML5 doc.
That said, open your HOME page. Go to File > SaveAs > newfilename.html.
Make required changes to the text only. Save again.
NOTE: Any changes you make to the external CSS file (style.css) will effect all pages in your site. That's how global CSS works. If you need a page specific style for page 2, embed it into the <head> tag of your document like this.
<style type="text/css">
Your page specific styles go here....
</style>
Nancy O.

Prevent users from printing the List of Business Partner window

Hi All
I have had this request and not sure if it possible.
He wants to prevent the users from printing the List of business partner.
That is when you do a search on the marketing documents.
when do a search it brings up the window, List of Business Partners.
they can go to file print...choose table and print the list of BP.
is there anyway to prevent that?
Thank you
Jerusha

is it a smartform
You have to disable from ADOBE end
sfpoutputparams-NOPRINT = X
when calling the function module FP_JOB_OPEN.
Unfortunately the PDF converter, which converts the output
of a Smartform, does not allow to disable the print button.
Please see note 841850 about this. Only the PDF-based forms
support this features (class CL_FP_PDF_OBJECT also belongs
to the PDF-based forms).

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

I'm having some difficulty with Time Machine. It appears to be deleting backups from random dates on my external hard drive. I am not deleting them. Are they hidden and how do I prevent this from happening? Can I retrieve them?

... I didn't know that Time Machine was more a last resort back up instead of main back up.
Don't rely upon Time Machine to the exclusion of all else. I compliment Time Machine with a periodic "clone". TM is much better than nothing, but it's a safety net, not a hammock
Here is my understanding of Time Machine's file deletion algorithm, distilled from Pondini's FAQ, Apple's KB articles, and my own observations.
Time Machine deletes ("thins") files from the backup disk as follows:
Hourly backups over 24 hours old, except the first backup of the day
Daily backups over 30 days old, except the first backup of the week
Older backups get deleted when Time Machine requires space and you deleted them from the source disk.
Therefore, assuming TM has been performing at least one backup per day, backup files will remain available:
at least thirty days, if they existed on your Mac for at least a day
until you run out of space, if they existed on your Mac for at least a week
In addition to the above, Time Machine always keeps one complete copy of your source disk so that the entire volume could be restored if necessary. Any files that remain on your source volume will be present on the TM backup, no matter how old they are.
If you are using 250 GB of space on your source disk, its Time Machine backups are likely to require at least twice that much. A good estimate of the minimum required backup volume size would be about three times the size of your source disk - 1.5 TB in your case.
A more thorough explanation would require Pondini since he has plumbed Time Machine's mysteries far more than I have.
http://support.apple.com/kb/HT1427

Preparing move to trash preventing me from shutting down

A window showing the message "Preparing to move to trash" runs constantly and is preventing me from shutting down my computer. The window is titled "Trash" and has a horizontal blue & white striped moving cylinder (like a sideways barber pole) and indicates there is 1 item to delete. I tried to force close but that does not work. Looking for a way to close this window. Thanks.

Hi jholla, and a warm welcome to the forums!
You're likely to have to Power down with the power switch, then do some repairs...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions after re-install, then reboot again.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

How can I easily move some space from NTFS to ext3 partition?

I am starting to run out of free space in my / directory. I've got home and / on separate partitions (sda7 and sda8, respectively) and would liek to subtract ~5GB of space from my NTFS 50GB partition (sda5) and move it to sda7. is it possible without losing any data?
[warnec@chakra ~]$ sudo fdisk -lu
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000001
Device Boot Start End Blocks Id System
/dev/sda1 * 63 42078959 21039448+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 42079084 625121279 291521098 f W95 Ext'd (LBA)
/dev/sda5 42079085 147072239 52496577+ 7 HPFS/NTFS
/dev/sda6 147072303 594004319 223466008+ 7 HPFS/NTFS
/dev/sda7 594019503 614984264 10482381 83 Linux
/dev/sda8 614984328 621330001 3172837 83 Linux
/dev/sda9 621330003 625121279 1895638+ 82 Linux swap / Solaris
[warnec@chakra ~]$

One more thing - AFAIR, I tried to do that once some time ago (don't really remember it now) and it worked fine, but after the whole process after booting Linux fsck came up saying it needs to repair something. Don't really remember. Anyway, it said that automatic repair isn't possible and gave me a propt like this (similar, am not sure after all that time has passed):
"Sector 0000001 is broken, you want to repair it? [Y/n]"
after saying "Y" there was:
"Sector 0000002 is broken, you want to repair it? [Y/n]"
and so on. You get it. I held Y for something like 20mins, and without any way of knowing how many sectors were left, I wanted to put a weight on "Y" key and go to sleep. But I was afraid that at the end there would be a prompt like "This will erase all your data, are you sure you want to continue?" and was afraid to leave this.
I decided to reinstall then, and now I want to never have to do this again.
PS.: This may be because I did this with Pragon Partition Manager (the WinXP program) and not Gparted.
Last edited by warnec (2009-10-23 18:45:09)

Unable to release space from table

Hi all,
We are unable to release space from a table called TST03 even after deletion of records.
Followings are the information.
Database     : 9.2
Table Name      : TST03
Tablespace     : LOCALY MANAGED.
Previously there were lots of rows.
At Present only 9 No of Rows.
Space allocated     : 41 GB
PCT_INCREASE     : Null
One of the column is of LONG RAW type.
Since the table is in LMTS, we were expecting that the space allocated will be released automaticaly after deletion of records.
Now, what are the option left with us to release 41GB of space ?
A. Is there any effect of "Drop storage" option of 'Truncate table' command ?
B. If yes , can i copy all the 9 rows to a new table, then use "Truncate table TST03 drop storage", check if space is released and then copy back all the 9 rows to this table.
C. Do you have any other easy solution apart from export/import ?
D. Checked all the relevant Note(646681,48400,10551), could not find an easy solution. I want to avoid offline export/import option.
Thanks .
Naba J Neog

> Hi all,
Hi !
> We are unable to release space from a table called
> TST03 even after deletion of records.
>
> Followings are the information.
> Database     : 9.2
> Table Name      : TST03
> Tablespace     : LOCALY MANAGED.
> Previously there were lots of rows.
> At Present only 9 No of Rows.
> Space allocated     : 41 GB
> PCT_INCREASE     : Null
> One of the column is of LONG RAW type.
>
> Since the table is in LMTS, we were expecting that
> the space allocated will be released automaticaly
> after deletion of records.
Sorry, but that is not what LMTS is for. Wrong assumption.
MaxDB e.g. returns space immediately - Oracle does not.
> Now, what are the option left with us to release 41GB
> of space ?
> A. Is there any effect of "Drop storage" option of
> 'Truncate table' command ?
Yes, the effect is, that after the truncate the table is empty and only one extent is allocated - the rest is returned to freespace. That's the DEFAULT behaviour of TRUNCATE TABLE.
> B. If yes , can i copy all the 9 rows to a new table,
> then use "Truncate table TST03 drop storage", check
> if space is released and then copy back all the 9
> rows to this table.
Nope - you would have to copy the LONG RAW columns as well and this cannot be done easily from sqlplus.
> C. Do you have any other easy solution apart from
> export/import ?
Nope again - you'd have to use this offline reorganisation as long as you're not on Oracle 10g and the long raw fields got converted into LOBs. With 10g you might also use the SHRINK table command. But with Oracle 9i - sorry: exp and imp (will be pretty fast for 9 rows...)
> D. Checked all the relevant Note(646681,48400,10551),
> could not find an easy solution. I want to avoid
> offline export/import option.
Sorry - no way to avoid it and still get the free space back.
Anyhow you might want to take actions to prevent this situtation from reoccuring.
These kinds of questions are covered in the notes
<a href="http://service.sap.com/sap/support/notes/48400">#48400</a>
<a href="http://service.sap.com/sap/support/notes/66290">#66290</a>
>
> Thanks .
> Naba J Neog
You're welcome.
Lars

How does WLC prevent layer 2 loops between mesh and different wired networks

hi all,
i have a question in regards to layer 2 loops. in my network i have clients devices moving between 2 separated mesh networks. from WLC prespective, the mac addresses should've moved between multiple bridge group and wired network.
can someone please enlighten me how WLC prevent layer 2 loops?
i understand spanning tree in the wired network, but WLC is not using SPT in mesh
thank you

Thanks for your help! This really helps a lot! We actually only want to replace the autonmous access point with the controller solution and make one WLAN available at another site. From what I can see, this is possible with our current solution - we just need to switch from Layer 2 to Layer 3 and purchase the corresponding amount of supported Access Points (I think we should be able to get some refurbished ones).
Am I correct in assuming that the Access Points we want to replace (AIR-AP1230B-E-K9 with 802.11b radio only) cannot be upgraded to lightweight ones? Since if I understood document http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html correctly, this is not possible with access points that only have 802.11b radios.
Regarding the switch from Layer 2 to Layer 3: Do we really only need to perform the steps I described in my first post?
And one last question regarding REAP. As far as I understood this is only needed when local traffic needs to be maintained in case the connection to the WLC becomes unavailable. So we really don't need it if we want to access resources that are only available over the WLC?
Thanks again for your help!
Michael

Removing spaces from field names?

Hi. I'm using Acrobat 9.3.3.
I use the Form Wizard to create... forms. And a lot of these forms I need to have it do some math calculations -- sums, products, etc. But when I use the Wizard, it auto-creates field names with spaces in them. And (I don't know if this is normal), when I create formulas, notations, scripts, if it's trying to pull from a field with a space in the name it doesn't work.
I have to go in and manually take out the spaces from all the field names... and there can be a lot of fields!
Is there some process I'm not seeing, or some way to configure the Wizard, to remove/prevent spaces in the field names?
Thanks for any info!
Liam

I don't believe it is possible.

Anyway to prevent spaces from looping

Similar Messages

Maybe you are looking for