Anyway to salvage a render after computer freeze?

I am just going to assume that there's nothing one can do in this instance...but just in case, thought I'd ask: is there any way to salvage what has been rendered if one's computer freezes mid-render?  I have a project which takes about 8 hours to render.  6 hours into my render, my entire macbook froze and the system restarted itself.  Is there any way to pick up from where I left off with the render?
Thanks

Well ... there's nothing like a combination of hubris and lack of knowledge to get you into trouble ...
Snow Leopard does not, and never had, a Recovery Partition.  Lion was the first version of OS X that ever had a recovery partition.
You also seem to know just enough about UNIX to get yourself into trouble.   "rm -rf /" completely erases your hard drive, it does not "Reboot the hard drive completely clean and back to Factory Settings" as you seem to think it would.
At this point you have to re-install OS X  from scratch.  If you have the grey recovery disk(s) that came with your MacBook, use them.  If you don't have them then you need to purchase Snow Leopard.  You may or may not then be able to migrate your apps from your other MacBook "(Same Model, Everything)".
There is another option that may or may not work.  If you really do have an identical MacBook, you may be able to start up the dead MacBook in Target Disk Mode, connect it to your running MacBook and clone the running MacBook's hard drive to your dead MacBook.  Repeat ... this may or may not work!  You will have to try it to see, and I suspect you will need to repartition and reformat the dead MacBook's hard drive first since you destroyed it from the Terminal.

Similar Messages

  • Flash Builder 4.5 blank mxml after computer freezes

    Hi !! I have a very strange problem, last night using Flash Builder 4.5 in the moment i was saving the project my computer froze and i rebooted my computer and the Main.mxml file is filled now with blank spaces. The properties says it is 230Kb but opening it in the text editor is just blabk spaces, trying to open in flash builder but ir hangs and when i open the project it gives me "Content is not allowed in prolog." Any ideas ?? Thank you very much !!

    Hi Anirudh !! thanks for the response. I have opened the mxml file in wordpad and in notepad, just blank spaces, 230kb of blank spaces, i think it has to do with saving (flash builder automatically builds the project on save) and freezing just the instant after i saved. I really dont think there is a solution, will have to redo it, thank you very much, hope this does not happen to anyone else, it is very frustating and depressing to lose a project. Best wishes !!

  • My mac air want shut down, had to force shut after computer freezing in itunes, box with saving itunes library has been up for 30 mins

    I have had a day of it. wanted to join my new pc computer to my itune account. one problem to many devices on my account and two are ones that got broken and couldn't be deauthrise. sooo i deauthrised all computers. my mac air was sitting beside me so i thought i will authrise it again, was that a mistake as my computer became very slow when i went into itunes. it froze and not in the spinning disc way, in the was doing nothing way. held power button in, after waiting 10 mins and it went to gray screen with itune boxs saying "saving itunes library". its been doing this over 30 mins now and will not shut down or anything esle because when i try power button again it says i have not logged out of itune and should do this before it can shut down. not happy!!!! this is after 2 hours prior apple tried very hard sale to get me to buy there tech support for £100. I have never had a problem before, doesn't that seem strange?

    shelbell508 wrote:
    I tried to run the disk utility and it wouldn't run properly
    Exactly what did you do to run Disk Utility and exactly what happened up to the freeze?
    I called some place to ask for advice and they said it could be my logic board???
    That's an easy answer to give but not necessarily the correct one.
    If you have the system restore disc that came with your Mac, boot with that disc in the Mac while holding down the "D" key. That will invoke hardware diagnostics. Run those several times to investigate the possibility that your Mac has a hardware flaw.

  • After computer freezer, the computer fails to reboot

    Hey,
    I was LANing with a friend playing WCIII FT and the game froze. Both of us turned our computers off. He was using a MBP and his computer rebooted immediately. When I tried to reboot my mac book, the screen with the apple logo an the spinning circle comes up and the dot moves around the circle indefinitely. I have left it on for up to 10 minutes but nothing happens. Does anyone have any ideas on how I can get my computer to boot up. Thanks
    Pat

    The game most likely froze because something happened to your machine. From the sound if it, a hardware failure, but maybe not.
    Insert the Leopard DVD and reboot holding down the "C" key.
    Once the DVD boots, after the language screen, in the menu, top left, under Utilities, run Disk Utility and repair HD and permissions.
    If that works, reboot and see what happens.

  • Reboot after computer freezes

    I like to play a game called Civilization, but recently it has been freezing up my computer when I try to  load it.   I have it stored from an external hard drive so that it does not not take up space on my computer's hard drive.  When it does freeze up, the only way I can get out of the program is to press the power button for a couple of seconds to turn off the computer.  I assume that this is not the most optimal way to do this.  I have tried to reboot using key strokes with out success.  Any other solutions would be helpful. 

    BOTH...when I try to hover over the time, the color wheel of death appears.  AND when I go into system prefs, the clock tab selections have been deselected.  When I try to select "show date and time in menu bar" again, it stalls for a bit, and then reverts to its deselected state.  I've tried rkaufmann87's fix, and it works for just a bit, then back to whacky.  Any ideas?

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • Computer freezes for a few minutes after minimizing/closing Photoshop/InDesign

    Hello,
    So I've had this problem since I got the computer, but it has gotten much worse recently. After I work in photoshop and indesign for a few hours, I minimize both programs and the computer freezes for a good 4 or 5 minutes, even my winamp music player starts skipping. I'm thinking its the RAM that needs time to dump out the data and its doing it very slow.
    I have:
    Q8200 2.33 ghz overclocked at 2.51
    8BG of RAM
    ATI EAH4850 512MB
    I'm thinking it might the overclocking or the Not so high quality of RAM sticks. please let me know of any other suggestions.
    Thank you

    Thank you for the response. I disabled the overclocking and unchecked Export Clipboard. It seems to be a bit faster, but I haven't tried it extensively yet. I'm running XP x64, if that makes any difference.

  • I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything.  possible to reverse this?  options?  restore hd from time machine?  pls help!!!

    long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder.  is it possible to reverse this?  what are my options?  restore hd from time machine?  
    a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd.  does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup?  this is confusing to me.
    another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates!  what's up with that? 
    I have a macbook pro, and recently updated the os to Yosemite.  the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop.  also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help. 
    any advice would be appreciated! 
    thanks!!

    thanks for replying. 
    the booting and walking away and then attempting to browse and clean method is what i've been trying to do.  it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes.  it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
    do you think restoring the hd from time machine will resolve the issue with all pics on the desktop?  and everything will be as it was from the date i restore it from?  sorry, as you can tell, i'm not overly computer savvy. 
    i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'? 
    as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder.  was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything.  once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto.  this was my attempt to clean it out entirely and start over.  it will basically be a lot of deleting.
    one problem, seems to lead me to more...which is just my luck.  :-) 
    thanks again, for your help.

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

    My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

    Hi Teodorafrombc,
    Thanks for visiting Apple Support Communities.
    If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
    Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
    Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
    Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
    Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
    You can find the article with these steps here:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the article with these steps and more information here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
    Best,
    Jeremy

  • Computer freezes after Post (Cannot load/re-install windows)

    Hi!
    I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+  The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives.  However, after the post my computer goes to the Load win XP in safe mode etc. and the computer freezes right there.  Also, when i try to reinstall windows XP, I just get past the boot from CD option and when it says setup is examining system hardware, it freezes at this screen and will not go any further; also when it does this, my numlock key blinks for some reason.  Any answers???

    Quote
    Originally posted by MSUHattrick
    fixed... just had to disable Legacy USB support
    That would have been our next route.. haha
    Good to hear, bro.
    Ian

  • Computer freezes if I don't remove CD immediately after burning playlist

    Hi - I suspect my iTunes application is corrupted somehow. If I don't remove a CD immediately after I burn it, my whole computer freezes. Also, CDs that I burn show up with a mislabeled name after they're burned. How do I go about uninstalling iTunes, but saving my rather substantial (3,000 tunes) library?
    Thanks for any help.

    Hi kelly003... Boot from your Tiger installer disk, select your language and then from the menu>Utilities select Disk Utility. select your hard drive from the left side and then Repair Disk. see if that straightens out your issue.

  • HT3918 I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas?

    I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas?  I have an imac mid 2011 21 inch.

    Cause and effect points to out-of-spec memory.
    Run Apple Hardware Test. Run the extended tests.
      Using Apple Hardware Test
    http://support.apple.com/kb/HT1509 
    If it fails the memory tests, remove the memory and re-seat it. The sockets are very "tight". Run AHT again.
    If it still fails, replace your original memory. If it works, you found the problem. Buy Mac memory from Crucial or OWC / MacSales.

  • I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it

    I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it?

    Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.

  • My computer freezes right after start up

    Hello,
    I have a macbook pro OS X 10.6.8
    I was working on my presentation using keynote.
    I had to force quit and shut down the computer while I had my keynote open.
    After that, my computer freezez right after start up. I see my background  picture and dock and everything. but there is a spinning wheel and I can not click anything. Right now, I am using safe mode to write this.
    Also, I can not open my keynote presentation or start new presentation. It says missing font: MarkerFelt-Thin and GillSans and other errors.
    I have tried verify disk and repaired disk. But it still freezez. How can I fix this problem?
    Thank you!!

    Run through this list of fixes, backup your data immediatly.
    Step by Step to fix your Mac
    Most commonly used backup methods

Maybe you are looking for