Anyway to save slideshow as an exe file

Hi
Are there any slideshow programs for the Mac that save them as exe file? I want to play it on a projector running on a PC
Richard

Are you creating the slideshows in iPhoto, iMovie, or Aperture?
Typically, the slideshows are created as movie files and, as such, can be played on any PC with movie playing software installed.

Similar Messages

When i download an ".exe" file the only option i'm given is to save; i want to be able to run

when i want to download an ".exe" file i'm not given the option to run, only save. i want run option.

I understood the security reasons for not making it a default but didn't see why it should be completely removed, just put warnings on the option if needed.
re download: yes I realise that at least it's to a temp area that can be cleaned up. All I care about is that I click and it runs, I do not want to worry about saving it, bringing up Windows Explore, finding it and then clicking on it again to run it.
Thanks a lot for the help, I hope Firefox won't dumb down the products to the lcd. It's tricky to design something that is simple to use but flexible enough to satisfy different requirements if needed but it is worthwhile.

Published EXE file Error-Adobe captivate 4

Hi,
I'm having problems with publishing an EXE file in Adobe captivate 4. I know it has something to do with our internet browser settings, we are a Court location and we have strict settings, but I'm wondering if there are work arounds through adobe captivate. See error below:
-allowing active content such as script and ActiveX controls can be useful, but active content might also harm your computer. Are you sure you want to let this file run active content? Y/N
-Help protect security, internet explore has restricted this file from showing active content that could access your computer, click here for options.
If you just select yes and proceed the captivate file runs fine and you can complete the training. Our goal is to be able to publish in this format because it's more stable than the PDF or HTML option but we don't want users to experience this error from the start.
Thanks for helping with my questions!
Libby

Hi, I've been trying to attach an image for the error message we get but not matter what I do it gives me an error and won't let me attach the image. Any suggestions or do you have an email I can send them too. The error message may be a little different than what I sent previously, it seems to give a different error message on different computers. But we are currently trying to create a new release of our training program so this should be the most current error message and the error message people will see when they open it on their PC's. Anyway this is what it says:
First Error Message:
File Download-Security Warning
Do you want to run or save this file?
Name: BasicCORIS_AttachAnAttorney.exe (name of our file)
Type: Application, 9.27MB
From: C:/CourtsOnlineTraining\Program Files\Dist....
Run Save Cancel (we select run, than you get next error message)
While files from the Internet can be useful, this file type can potentially harm your computer. If you do not trust the source, do not run or save this software. What's the risk?
Second Error Message:
Internet Explorer- Security Warning
The publisher could not be verified. Are you sure you want to run this software?
Name: BasicCORIS_AttachAnAttorney.exe
Publisher: Unknown Publisher
Run Don't Run
This file does not have a valid digital signature that verifies its publisher. You should only run software from publishers you trust. How can I decide what software to run?
I hope this makes sense. Let me tell you a little more about how our training is set up. We load the training on to a USB stick that includes a menu, the training modules, and a shortcut. Once the USB is downloaded on to the users PC they can select a shortcut icon for the training. Once they select the training shortcut it opens a menu that they can select training from. When they select on the desired training this is when they would receive these error messages. Our current release is in a HTML format, but because of this format the training interacts with the web browser and causes us problems so we were hoping to publish in exe and the training wouldn't open in a web browser.
Let me know if you have further questions or if I've just confused the situation more. Again thanks for your help!
Libby

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change default directory of exe file

I have created a VI that reads a template and writes on the template and saves it to a new file. When i created to an exe file, I would like for this exe to be able to be used on any computer. As such, the directory where i will open my template will change on different computers. Hence I am having this problem of how to change my VI such that it will choose this template in a new computer and set it as its default directory.
I understand that in my own computer, I can simple "set current values as default" so that my VI will always open this file from a particular path. But what i need help with is when i put it on another computer where the particular path would definitely be different. I tried using the config file.vi but I could not understand how it is used.
Please assist me in this. Thanks

Hi Aaron,
Micorsoft suggest to use folders like UserAppData to store files for your own programs.
Put your template in there and use GetSystemDir function to get the UserAppData path...
Or you put the template in the program folder or one of it's subfolder (not recommended by MS) and use a relative path to load it...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Communication b/w SAP and VB .exe file - Very urgent.

hi,
I am currently in a project implementing SAP for a cement manufacturing company. Here we have a VB .exe file which takes parameters and return values. now we need to connect this to application to SAP R/3 to pass data to that application and access the data from that .exe file.
Note: we don't have any source code for that vb .exe file its a third party software.
Its an very urgent one....
please guide me how to do it with all steps.
Any material please pass to [email protected]
Thanks in advance.

form grosswt .
refresh itab3.
clear itab3.
   Executing VB EXE file to get the weight from weigh bridge
call function 'WS_EXECUTE'
   exporting
      DOCUMENT                 = ' '
      CD                       = ' '
      COMMANDLINE              = ' '
     inform                   = 'X'
       cd      = 'C:\SAPWEI'
     program                  = 'C:\sapwei\MyVB.exe'
      STAT                     = ' '
      WINID                    = ' '
      OSMAC_SCRIPT             = ' '
      OSMAC_CREATOR            = ' '
      WIN16_EXT                = ' '
      EXEC_RC                  = ' '
    IMPORTING
      RBUFF                    =
    EXCEPTIONS
      FRONTEND_ERROR           = 1
      NO_BATCH                 = 2
      PROG_NOT_FOUND           = 3
      ILLEGAL_OPTION           = 4
      GUI_REFUSE_EXECUTE       = 5
      OTHERS                   = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   Fetching Value from VB text file
call function 'WS_UPLOAD'
   exporting
    CODEPAGE                      = ' '
     filename                      = 'C:\sapwei\w1.txt'
    FILETYPE                      = 'ASC'
    HEADLEN                       = ' '
    LINE_EXIT                     = ' '
    TRUNCLEN                      = ' '
    USER_FORM                     = ' '
    USER_PROG                     = ' '
    DAT_D_FORMAT                  = ' '
IMPORTING
    FILELENGTH                    =
    tables
      data_tab                      = itab3
EXCEPTIONS
    CONVERSION_ERROR              = 1
    FILE_OPEN_ERROR               = 2
    FILE_READ_ERROR               = 3
    INVALID_TYPE                  = 4
    NO_BATCH                      = 5
    UNKNOWN_ERROR                 = 6
    INVALID_TABLE_WIDTH           = 7
    GUI_REFUSE_FILETRANSFER       = 8
    CUSTOMER_ERROR                = 9
    NO_AUTHORITY                  = 10
    OTHERS                        = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at itab3.
    v1 = itab3-num.
    pgrwt = v1.
endloop.
message 'Save Gross Weight' type 'S'.
endform.                    " grosswt

How to execute a .exe file in java(Jsp) without using a process ???

Hi All ,
How to execute a .exe file in Jsp without using a process ??? ...
Is it Possiable ????

itsdhanasaraa wrote:
But as this a web application ... By using Runtime i'm getting some probs ..
Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
Ain't gonna happen.
its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
1) it's not "taking more time to execute", whatever that's supposed to mean.
2) there's no other way to execute something. Not that you should every use even that way anyway
3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

Does anyone know how to build an exe file of a complete dsc system ?

Creating an exe file of a VI that uses dsc components is not that difficult, although it could be easier. But, I also use vi-servers to communicate with the tagengine, and this is where I fall short. The document "viserver.pdf" located in the labview\manuals folder, describes how to create, develop and test VI-based servers using vis from the DSC Server Development
palette. But how should a vi-server be handled when used with an application that among other things uses a taglist (scf file) that requires certain vi-servers to run to update tag values etc. I have found that one option is to include the vi-servers in the "LabVIEW DSC Run-Time System 7.0", register them there and include all vis needed f
or them to run in subfolders of the "LabVIEW DSC Run-Time System 7.0". Servers will not load vis from the \vi.lib folder nor from \user.lib or any other \labview 7.0 folder. Can these servers instead be created as exe files, and how can this be done ?

Soren,
sorry but it's not possible to build an executable from a vi-based server. You need to distribute this type of server as an llb. Please follow this link to the NI knowledge base for more information:
http://digital.ni.com/public.nsf/websearch/082B10137820BF5886256C250062DBB4?OpenDocument
The document is not very specific which options you should use when you save your server vis but I assume it should be "Application Distribution".
Best regards,
Jochen Klier
Applications Engineering Group Leader
National Instruments Germany GMbH

How to run .exe files with Virtual PC for Mac

Hey Guys, I'm new around here and with mac technology as well. Anyway, I have an iMac OS X 10.5.1 Leopard and I've recently purchased the Virtual PC for Mac 7.0.2 software. So I'd like to know how to use this program properly, because I need to run some executable files in my computer. It is confusing for me because I don't know how to get started, and I only get to the part when it says "OS not found, Install an OS on this hard drive".
Honestly I've no idea of what an OS is or where do I get that. So I'd really appreciate if one of you guys could tell me, step by step, what to do to use Virtual PC properly, and finally learn how to run .exe files on mac.
Thanks in advance!
Have a nice day!

Always nice to see new faces
Honestly I've no idea of what an OS is or where do I get that.
This brings up the second part of your problem. The first part is setting up either a proper Virtual Machine program like Parallels or VMfusion, or setting up a Boot Camp partition on your drive.
http://www.parallels.com/
http://www.vmware.com/products/fusion/
OS stands for Operating System. You are running Leopard 10.5.7 as an operating system on your Mac (MacOS X).
The second part of your problem - You will need a copy of Windows XP or Vista if you want to run Windows on your Mac.
There is at least one other solution for running Windows programs on a Mac. It's called "CrossOver" by a company named 'Codeweavers'. It's based on a project for "Wine" to be able to run PC programs on a Mac or Linux, without having to buy or install Windows. It works with a narrow subset of Windows programs so you would want to make sure the program you want to run is compatible with CrossOver before you buy it.
http://www.codeweavers.com/products/cxmac/
In addition to all the above information, you need to upgrade your Mac to the latest 10.5.7 from 10.5.1. "Software Update" is located under the black Apple icon in the Menu Bar at the top left corner of your monitor. After you are updated you will want to update your Profile here so that it shows the proper OS version.
With your level of experience with MacOS X and the Windows OS's you should probably get some help from a local Apple store. They have an appointment system and do offer many types of help and training, and they can offer assistance with choosing the proper programs for you to purchase for your machine.
You are also welcome to continue to ask questions here, of course. You will want to ask your questions with different issues that come up in different threads so that the answers stay focused on the title of the thread.
Message was edited by: dechamp to try to be more accurate with a fairly complicated issue...

How do you change the default Save As location for PDF files?

I have not been able to find a straight answer anywhere. I am scanning documents to my email then I need to save them. Instead of saving them to the last folder I saved a file in, (which would be logical) it saves them in a temporary files folder EVERY time. I have seen answers about how to change the folder when saving documents from a web browser but that is not what I am doing. Someone please help! I have thousands of files to save and this is incredibly frustrating. Agh!!!

Is it your scanning software that does that, or Adobe Reader?
Anyway, I don't know how to change the default change destination for either of it.
I have had a similar problem with an entirely different software, so what I did is create a shortcut to the destination folder in my Temp folder, so a simple double-click when saving gets met quickly to that target folder.

Could not save my_file.psd because the file is already in use or was left open by another app"

Since some time ago I often get this message when trying to save my PSD file: "could not save my_file.psd because the file is already in use or was left open by another application", whereas there's no application that uses the file in reality. What could cause this problem?

What could cause this problem?
If I remember correctly posibilities include the OS, anti-virus software, … and if you work across a network you are basically on your own anyway as Adobe specifically discourages this.
What are your OS, program version, …?

Unable to download exe files after unblocking, 404 error. handler mappings execute change prevent infopath, export to excel, and sharepoint designer from working.

I removed .exe from the block list, checked MIME types, all ok,
I followed this solution: http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/b380a13e-a15f-4e32-98cd-12747538ad20?prof=required
( go into IIS (I am assuming IIS 7.0) and select the particular web site and click
handler mappings and Edit feature permissions and
uncheck the Execute box .)
It works, I can now open exe files. But it causes other major troubles so far:
-Cannot Export Lists to Excel
-Cannot Publish and Save InfoPath forms
-Cannot edit subsites in SharePoint Designer.
Does anybody have another solution that won't disable other features? What is the best way to do it? I have SolidWorks Edrawings in .exe that needs to be accessible.
Thank you.
Guillaume Gagnon, MCP Senior System Administrator Forensic Technology WAI Inc.

Hi Guillaume,
As you know, if we remove the Execute permission for handle mappings, we will be able to download .exe file from SharePoint server. But as you said, this will cause other issues.
The another solution to allow to download .exe file is remove the CGI-exe handle mapping from the handle mappings directly. You may need to restart Internet Information Server(IIS). After that, we will be able to download .exe file directly.
Open the IIS manager
Select the site from the "Sites" tree
Double-click "Handle Mappings"
Right-click "CGI-exe", and then click "Remove"
Thanks,
Jin Chen
Jin Chen - MSFT

How to control (the input and output) EXE file after I call it using exec?

Hi,
I knew that I can use runtime.exec() to call one EXE file, and this works. But this EXE has two characteristics:
1. After this exe starts, it asks user to input number such as 1 or 2 onto computer screen, then press return. Then the exe will start the calculation.
2. after it starts calculation, it prints 3 columns of numbers onto the screen.
My two questions are:
1. How to use java to input the number such as 1 or 2 automatically? this EXE can not work like this in DOS command line:
C:> file.exe parameter
The parameter is the number such as 1 or 2 that I wanna input.
2. how to redirect the 3 columns of numbers from computer screen to txt file?
My colleague can solve these two questions using Mathematica. So I know that definitely there is at least one solution for it. I just can not do it using Java. This wierd exe file bothered me a lot and I really wish that I can get help from someone in java community.
Thank you!
Tony

When you call Runtime.exec, you get a Process object. (I presume something similar happens when you use ProcessBuilder.) Process has methods with names getOutput, getInput, and getError. These correspond to the standard input, standard output, and standard error streams of the spawned process.
You can read and write to the process on the streams corresponding to input and output that the process writes to the console.
[add]
In fact, you should be grabbing and reading the output/error streams anyway, because of the points raised by the Traps article. Google "Java Runtime exec traps" and you'll probably get a link to this JavaWorld article, which describes common Runtime.exec problems and how to solve them.
Edited by: paulcw on Jun 15, 2010 4:09 PM

Name of .exe file generated from Air Help

Is there a way to customize the name of the .exe file generated by the Air Help output? I can specify the name of the .air file. But when the Air application is installed, the .exe filename is the same as the help title ("Help Title" field in the Adobe Air dialog box) . This means the help title is used in the title bar of the Air application, on the Start menu and Add/Remove Programs, and in the filename.
I would like to use a shorter, one-word filename. I would expect the name of the .air file to be the name of the .exe file.
I'm generating an Adobe Air application using RoboHelp 8.
Thanks,
- Maura

I assume you are creating the file as a java.io.File object. Under those circumstances you should be able to specify the name and target directory when you save it:File f = new File(directory+System.getProperty("file.separator")+filename);Or, if you have already named it:
f.renameTo("file.txt");Actually, now I look at it, I may have totally misunderstood what you are trying to do there- are you naming it right in the hyperlink?

When I try to download a .exe file extension, Firefox designates it as a binary file which is useless to me.

using Windows 7 with i3 processor all the latest updates. Firefox is the ONLY browser that gives me this problem. I should not have to turn off my antivirus or go into my config files, write code or anything to have this simple task to work. If I buy a download for a program and get one shot at the download which is an executable file, I should not have it come up as a Binary file and can not use it to load the program that I just ordered.

Sorry you are having problems. Can you give an example preferably of some small publicly available file and the site you are trying to download it from ?
As a simple example of a download (ok it is a .png image file not not a .exe file) but can you try to download a copy of your avtar/icon, as used on these forums. In Windows one method is that you right click & should get an option save. <br/> Mine alongside uses the link
* https://support.mozilla.com/media/uploads/avatars/avatar-257447.png
Are you able to download such an image, then see it in your download manager, and find it on your computer.
Once you have got Firefox to save your binary file you can use it. In the case of the .exe file you are trying to download that should be usable as intended with your Windows Operating System, the avatar also should be easily opened and viewed.
P.S.
You could try installing the add-on https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/ if you wished to adapt Firefox to run .exe files instead of just save them.

Anyway to save slideshow as an exe file

Similar Messages

Maybe you are looking for