Anyway to selectivily enable/disable bluetooth function for selected apps like papago in iphone.

Hi,
Anyway to selectively enable/disable bluetooth function for selected apps like papago navigator in iphone.
I want to maintain bluetooth connectivity to car headset for handsfree driving while papago navigator on ky iphone continuously guide me on the road using the iphone speaker. So when someone called me on the phone, it will use the car headset. is there such as apps?
Rgds,
Kpk

Hi,
In pageflow definition, "Train Stop-->Skip" property controls the enable/disable state.
If Skip value is true (it can be controlled with EL expression) than related link and button in train components are disabled.
They are enabled other If Skip value is false (It is default).

Similar Messages

Add Voice Command Enable/Disable Bluetooth

Add Voice Command Enable/Disable Bluetooth
Do you think apple will ever add additional voice commands like one to enable and or disable Bluetooth so that I am able to save battery life and time with trying to use my Bluetooth Headset?
It’s annoying having to unlock my phone go to Home / Settings / General / Bluetooth every time I get into my car so I can use my headset.
Thanks

Hard for us to tell, since we are just users like you. You can provide feedback to Apple letting them know that you would like to see that feature. Use this link to provide feedback http://www.apple.com/feedback/iphone.html

HT201299 My Iphone 4s wont remember the disable cellular data for certain apps as I soon as I switch on the 3g and go back to home and come back again to Cellular the all apps are being enabled..Please help

My Iphone 4s wont remember the disable cellular data for certain apps as I soon as I switch on the 3g and go back to home and come back again to Cellular the all apps are being enabled..Please help

First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Functionality for Select and Save layout in a report output

Hi,
I had developed a report program containing several fields in the output and requires the Functionality for Select layout and Save layout in a report output.
Please suggest.
Thanks,
Shariq.

While calling the FM for List Display ( "REUSE_ALV_LIST_DISPLAY" or "REUSE_ALV_GRID_DISPLAY" ) set the Parameter I_SAVE for Setting the Layout and Selecting a different Layouts.
The possible values for I_SAVE are "A", "U", "X" or others. Depending on the requiement you can set different values for the Parameter I_SAVE.
' ' = display variants cannot be saved
Defined display variants (e.g. delivered display variants) can be selected for presentation independently of this flag.
Changes can not be saved.
'X' = standard save
Display variants can be saved as standard display variants.
User-specific saving is not possible.
'U' = only user-specific saving
The user can only save display variants user-specifically
'A' = standard and user-specific saving
The user can save a display variant user-specifically and
as standard display variant. The user chooses in the display variant
save popup.
Reward points if helpful.

I purchased an additional audio function for the apps ＂baby monitor＂today, but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

I purchased an additional audio function for the apps ＂baby monitor＂today， but this function didn't work on my ipad. Grateful if you would let me know how to refund the cost.

Refund
http://www.apple.com/emea/support/itunes/contact.html

Standard function for SELECT???

I need to do a dynamic select, because i only know table name dynamically.
I found DB_UPDATE_TABLE for update operations, but i need a similar function for select??
Any ideas???

Hi,
check this code...
For dynamic table name....
REPORT demo_select_dynamic_database .
DATA wa TYPE scarr.
DATA name(10) TYPE c VALUE 'SCARR'.
SELECT *
INTO wa
FROM (name) CLIENT SPECIFIED
WHERE mandt = '000'.
WRITE: / wa-carrid, wa-carrname.
ENDSELECT.
<b>For dynamic field list</b>
REPORT demo_select_dynamic_columns .
DATA: itab TYPE STANDARD TABLE OF spfli,
wa LIKE LINE OF itab.
DATA: line(72) TYPE c,
list LIKE TABLE OF line(72).
line = ' CITYFROM CITYTO '.
APPEND line TO list.
SELECT DISTINCT (list)
INTO CORRESPONDING FIELDS OF TABLE itab
FROM spfli.
IF sy-subrc EQ 0.
LOOP AT itab INTO wa.
WRITE: / wa-cityfrom, wa-cityto.
ENDLOOP.
ENDIF.
Regards
Sudheer

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

Disable print function for a pdf document

Is there a way to make an Adobe pdf read-only? Can I disable the print function for an isolated document before making it available to others? I am working on MAC laptop.

hi
i got the answer
we have to give issue output to -->screen

Need an enable/disable Labview VI for SC-2062 relay board using PCI-6503 DAQ Card.

I am using Labview 6i, and I need to write an enable/disable VI that will enable and disable 6 of the 8 relays at any time while keeping the whole vi running. Therefore one or more positions may be changed at a time, but positions that don't change cannot be interrupted when changing others (no port resets allowed). I was wanting to maybe send a 1 by 6 array of some sort out but I can't figure out how to use the array to communicate with the DAQ card, relay board and SC-2051 adaptor. There also needs to be error handling in and out. Thanks for your help. Any examples would be very helpful.

Hello;
The best way to go about that is to disable the data points correspondent to the channels you want to disable. Meaning that you can ignore the datapoints of the channels you want to disable on the fly. That is the only way to disable channels on the fly.
Regards
Filipe A.
Applications Engineer
National Instruments

How to use bluetooth function for the Mega player(522BT)

Hello all!!!!!
Pls ,help me!
I am from Myanmar.I can't use Mega player(522BT)for PC to the bluetooth function of this device.
That is ,we can only use the phone to this device.
I want to know. Pls,help me.
With Regards,
Thwe Thwe(Myanmar)

Hi,
You could do something like this,
http://www.codersrevolution.com/index.cfm/2008/10/14/Flex-Charting-Format-your-X-and-Y-Axi s
hope it helps!
Regards ,
Bhavika

Enable E-mail functionality for RFQ/PO.

Hi All,
I have a requirement to enable E-mail functionality to send the PO/RFQ output to the Vendor. Whenever we go to the messages in the PO ME22N or ME23N & click on the out message, we should get a pop up asking to enter the E-mail address.
Please let me know what settings do we need to do?
-Muneer.

Hi,
Purchase order via e-mail in SAP system can be done , there are some configurations and pre-requisites to do as follow:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470
Regards,
Biju K

It is possible to disable bluetooth ad2p for facetime only?

i need to stop de communication between my autoradio on bluetooth for facetime... beceause my autoradio see the ipod touch like an iphone so i juste want
to listen my music on bluetooth not talk over bluetooth with face time
so it is possible to disable bluetooth for facetime or just completly disable facetime? thx

You can disable facetime:
iPod touch User Guide (For iOS 4.3 Software)

Enable Dual control function for FBZ2

Hi,
Its related to Dual control functionality for vendor master data. I got a issue, if I change the sensitive fields for a vendor master and run F110, then it shows exception that vendor master not yet confirmed.
IS it possible to post outgoing payment through transaction FBZ2, in this case?
I have seen some transactions where the clearing document was posted by transfering the payable amount to intercompany or offsetting account and making payment later, without getting any exception, eventhough vendor master change not yet confirmed.

hello, anisha.
like you, i have also wondered what the payment block in the customer master is for. after reading the documentation and asking an FI consultant, i gather that this block is apparently used to prevent automatic payment transactions for a customer.
again, why anyone would want to automatically post payments for a customer is an issue i wish to explore. perhaps this applies to scenarios where very many customers pay the exact invoice amount or have the payments guaranteed? or perhaps to prevent automatic offsetting of a customer/vendor account?
regards.
Edited by: jonathan y on May 6, 2009 10:23 AM

Enabling the Export function for a distribution list in 'Private folders'

Dears,
Could someone please guide to the appropriate authorization that would allow the 'Export...' function for a distribution list created in a folder under 'Private folders' - Transaction : SBWP
The option is dimmed, although the user used has the SAP_ALL profile.
Thanks.
Reda

click file/publish settings/flash/actionscript settings and make sure frame 1 is set as the export frame.
if that's already set, don't use test scene.

Anyway to selectivily enable/disable bluetooth function for selected apps like papago in iphone.

Similar Messages

Maybe you are looking for