Anyway to set an internal bookmark with QT 7 Pro ?

I would like to be able to bookmark specific time-points in a movie being viewed by Quicktime (7.04 Pro), much like I can with the DVD Player application.
Has anyone figured aout a way to do this or perhaps know of a utility to do so.
(I am not trying to bookmark an external url but to set bookmarks within a given movie so that I can conveniently find my place when I view it again.)
Thanks
Powerbook G4 15 alum. 1 ghz Mac OS X (10.4.5)

I don't know about 'bookmarking' per-se, but you could add a chapter track.
The easiest way to do that that I have found is to use Metadata Hootenanny.
--Dave Althoff, Jr.

Similar Messages

Questions about setting up my network with my Mac Pro?

I'm trying to set up my network with my Mac Pro. I have two other roommates that need internet and a printer that we all need to access. The modem is with my Mac Pro in room 1, the printer is with another PC in room 2, and another PC with wifi is in room 3. What is the best way to connect all these.
My idea was to install an Airport card in my Mac Pro, then add an Airport Express station w/airtunes to room 2, to connect the PC and printer. That way, room 3 can access with wifi, and room 2 can physically plug into the Airport Express station. Problem with that is that the Airport Express Card must be professionally installed in my Mac Pro and that $80+ charge on top of the Airport Express and Aiport Card itself, turns this into a $200+ endeavor.
I also have a wireless Linksys router and Linksys WiFi USB receiver. Anybody have any other ideas?
Mac Pro Mac OS X (10.4.9)

Your plan wouldn't work anyway. The Mac Pro can not create a WDS compatible wireless network. Therefore the AirPort Express (AX) can not use WDS to wirelessly join the network. Therefore the AX's Ethernet port will not be activated.
The best solution is to buy an inexpensive wireless router [or the AirPort Extreme base station (AEBS)]. Connect the Mac Pro via Ethernet to the router. Add a wireless adapter to the PC in room 2. Therefore the PCs will connect wirelessly while the Mac Pro connects via Ethernet.

How do i set up my mg3100 with my macbook pro to work wirelessly.

i don't have the original setup cd for my printer and downloaded the software setting up the computer without a usb lead. now it only works as a printer or scanner when i use a lead but won't work wirelessly. how can i get the printer to function wirelessly ? thanks !

What are you using for wireless? Apple Airport? or other wireless modem? http://windows.microsoft.com/en-US/windows7/Install-a-printer-on-a-home-network
OR
http://support.apple.com/kb/HT2495

I broke my USB mouse, is it possible to set up my imac with an old pro mouse without having a mouse to navigate?

I'm in the market for a new mouse, and a friend offered an older style I get by for the time being. My computer doesn't seem to recognize it; how do i know if it even works and how do I set it up? Can I use a non-apple mouse? I'm a on tight budget, and it seems some of the aftermarket mice are cheaper and offer more options. I'm sorry if this has been covered somewhere else, but I'm limited to using my iPhone 4 for the time being.

There are aftermarket USB wired mice at the Apple store online and likely in a retail location, in addition to Apple wired and wireless mouse, touchpad, etc. Most any quality mouse should work. And likely without additional software. Plug and play.
http://store.apple.com/us/mac/mac-accessories/mice-keyboards#!
Not sure why the older Apple pro mouse doesn't work. Maybe the newer ones have different circuitry inside compared to vintage ones from 10+ years ago. The original dark color 'Pro mouse' was a good product. I have one that failed only due to the wire coming apart right at the mouse. Some people will repair those.
Good luck & happy computing!

Need Help Setting Up Raid Card with Windows xp pro 64 bit

I need a 64 bit driver for my k8t neo-fis2r motherboard. I tried to use the disk that came with the board, but I keep getting an error. please help.

go to the via website and download the via 5.00a package, it contains a driver for the onboard via controller!
dont try the promise one, it wont work! tried it several times! we have to wait for an updated driver to be able to use it!

[svn:fx-trunk] 5812: Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information , so the animation would skip immediately to the end.

Revision: 5812
Author: [email protected]
Date: 2009-03-31 11:34:56 -0700 (Tue, 31 Mar 2009)
Log Message:
Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information, so the animation would skip immediately to the end.
Bugs: SDK-20356
QE Notes: spark/effects Mustella tests currently hosed, couldn't run test suite
Doc Notes: None
Reviewer: Jason
Testing: checkintests, Mustella effects tests could not be run (post-rename issues)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20356
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimationProperty.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/animation/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateColorIns tance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateShaderTr ansitionInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/FadeInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/MoveInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/ResizeInstance. as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/Rotate3DInstanc e.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RotateInstance. as

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

HT4527 I set up my iphone with my laptop but now its broken is there anyway of adding new song using anpther laptop/desktop computer without erasing everything currently on my phone?

I set up my iphone with my laptop but now its broken is there anyway of adding new song using anpther laptop/desktop computer without erasing everything currently on my phone? I have no access to my old computer and the songs on it are from cds not itunes purchases
Please help!!

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Recent iOS 7 has provided background setting with parallax feature, which zooms in the photo no matter what. Is there anyway to set the wallpaper as it appears in the photo? Please help,

Is there anyway to set the wallpaper as it appears in photo album?
FYI im using 4S currently

i believe it zooms, even if the parallax feature is turned off (which can be toggled by going to settings -> general -> accessibility -> reduce motion
also, more information can be found at this link https://discussions.apple.com/thread/5318510

Unable to record internal audio with RecordMyDesktop

In order to record sound and video from my desktop, I installed RecordMyDesktop (https://wiki.archlinux.org/index.php/RecordMyDesktop) and followed the instructions from post #4 and #6 on a thread about "Recording internal audio with alsa and recordmydesktop" (https://bbs.archlinux.org/viewtopic.php … 3#p1359593). When I try to record with "recordmydesktop --device looprec", it will not start recording and closes with the following error:
Initial recording window is set to:
X:0 Y:0 Width:1920 Height:1080
Adjusted recording window is set to:
X:0 Y:4 Width:1920 Height:1072
Your window manager appears to be i3
Initializing...
Buffer size adjusted to 4096 from 4096 frames.
Opened PCM device looprec
Couldn't set format.
Error while opening/configuring soundcard looprec
Try running with the --no-sound or specify a correct device.
If this information would be helpful, I use alsamixer and "aplay -l" gives the following:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC663 Digital [ALC663 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 7/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
I can record from the microphone with with the command "recordmydesktop". I succeeded in recording the internal audio with audacity by choosing the device "looprec" for recordings. I'm not sure why RecordMyDesktop gives an error while Audacity does not. Below is my ~/.asoundrc, which I copied from the aforementioned thread. I am not knowledgeable, but I guess there is a mistake in it? Would you please assist me solving this error? Thank you for your time.
pcm.!default {
type asym
playback.pcm "LoopAndReal"
#capture.pcm "looprec"
capture.pcm "hw:0,0"
pcm.looprec {
type hw
card "Loopback"
device 1
subdevice 0
pcm.LoopAndReal {
type plug
slave.pcm mdev
route_policy "duplicate"
pcm.mdev {
type multi
slaves.a.pcm pcm.MixReale
slaves.a.channels 2
slaves.b.pcm pcm.MixLoopback
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
pcm.MixReale {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
pcm.MixLoopback {
type dmix
ipc_key 1025
slave {
pcm "hw:Loopback,0,0"
rate 48000
#rate 44100
periods 128
period_time 0
period_size 1024 # must be power of 2
buffer_size 8192
Last edited by rayanamukami (2014-07-05 14:05:20)

You might want to take a look here and here.

My How can I sync my bookmarks with my browser of choice on PC so i can have same bookmarks and bookmark-folders in my PC browser as I have made on my iOS device?

I have saved bookmarks on my iOS device and neately organized them as well. I want my IE or Chrome to import those bookmarks so i can have a copy of each in my computer. Plus I would prefer the same arrangement in my browser as on my iOS device. Is there any way of achieving this using iCloude?
In short, i want to importe my bookmarks from iPad to Windows PC browser (i would prefer firefox, but chrome is also a fine option).

On your iOS device, go to Settings>iCloud, sign in with your Apple ID to create your iCloud account and turn Safari to On. Then set up iCloud on your PC as explained here: http://www.apple.com/icloud/setup/pc.html, and check Bookmarks. The requirements for syncing bookmarks with iCloud are:
Windows 7 or Windows 8
iCloud Control Panel 3.0
Internet Explorer 9
Firefox 22
Google Chrome 28 (desktop mode only)
Not sure if the bookmark organization will be the same on your PC or not.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

International Characters with Netmail

Hi all,
I'm using Sun One portal server 6. I have set the platform charset to Iso-8859-7 so that every portal page displays greek characters correctly.
My only problem is with NetMail. When I get mail I can see greek characters correctly with NetMail Lite. However when I'm sending email using NetMail Lite if I write Greek characters they turn to question marks when I read the email with any client (Netmail Lite, Outlook express etc).
Any ideas
Thanks
-George

Has anyone know if you can type international characters with the iPhone keyboard.
Yes.
http://m10lmac.blogspot.com/2007/09/iphone-input-keyboard-gets-accented.html

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

Internal table with out header line

Hi friends,
Can u send me code for internal table with out header line : how to declare ,how to populate data and how to access the data
Regards,
vijay

Hi Vijay
There are several ways to declare an internal table without header line:
A) You can define a type table
TYPES: BEGIN OF TY_ITAB OCCURS 0,
        INCLUDE STRUCTURE ZTABLE.
TYPES: END   OF TY_ITAB.
and then your intrnal table:
DATA: ITAB TYPE TY_ITAB.
B) DATA: ITAB TYPE/LIKE STANDARD TABLE OF ZTABLE.
C) DATA: ITAB TYPE/LIKE ZTABLE OCCURS 0.
All these ways create a STANDARD TABLE
You can create other types of internal table, for example SORTED TABLE or HASHED TABLE.
These kinds of table can allow to improve the performance because they use different rules to read the data.
When it wants to manage a table without header line, it need a work area, it has to have the same structure of table.
DATA: WA LIKE ZTABLE.
DATA: T_ZTABLE LIKE STANDARD TABLE OF ZTABLE.
A) To insert the record:
If you use INTO TABLE option you don't need workarea
SELECT * FROM ZTABLE INTO TABLE T_ZTABLE
                                  WHERE FIELD1 = 'Z001'
                                    AND FIELD2 = '2006'.
but if you want to append a single record:
SELECT * FROM ZTABLE INTO wa WHERE FIELD1 = 'Z001'
                               AND FIELD2 = '2006'.
APPEND WA TO T_ZTABLE.
ENDSELECT.
Now you need workarea.
B) To read data: you need always a workarea:
LOOP AT T_ZTABLE INTO WA WHERE ....
WRITE: / WA-FIELD1, WA-FIELD2, WA-FIELD3.
ENDLOOP.
or
READ T_ZTABLE INTO WA WITH KEY FIELD3 = '0000000001'.
IF SY-SUBRC = 0.
WRITE: / WA-FIELD1, WA-FIELD2, WA-FIELD3.
ENDIF.
Anyway if you want to know only if a record exists, you can use the TRANSPORTING NO FIELDS option, in this case it doesn't need a workarea.
READ T_ZTABLE WITH KEY FIELD3 = '0000000001'
                                  TRANSPORTING NO FIELDS.
IF SY-SUBRC = 0.
WRITE 'OK'.
ENDIF.
C) To update the data: it always needs a workarea
LOOP AT T_ZTABLE INTO WA WHERE FIELD3 = '0000000001'.
WA-FIELD3 = '0000000002'.
MODIF T_ZTABLE FROM WA.
ENDLOOP.
or
READ T_ZTABLE INTO WA WITH KEY FIELD3 = '0000000001'.
IF SY-SUBRC = 0.
WA-FIELD3 = '0000000002'.
MODIF T_ZTABLE FROM WA INDEX SY-TABIX
ENDIF.
AT the end you can use the internal table to update database:
MODIFY/UPDATE/INSERT ZTABLE FROM T_ZTABLE.
See Help online for key words DATA, you can find out more details.
Max
Message was edited by: max bianchi

Anyway to set an internal bookmark with QT 7 Pro ?

Similar Messages

Maybe you are looking for