Anyway to set the time signature mid song?

I'm making a song in garageband and i need to change the time signature for one bar from 4/4 to 2/4 and then back again, is there anyway to do this?
Your help is appreciated.

Sorry, GB only allows for one time sig per song. As long as you don't need the notation, you can probably live with it that your bars now are shifted two quarters - until you insert the next 2/4.

Similar Messages

Is there anyway to record the time of a signature on a document?

I work in real estate and timely signatures are very important. Is there anyway to show the time a document was signed on the actual document?

Hi Scott,
Yes, this is quite possible using the text-tagging feature in Echosign. A sample of this text-tagging code would be the following for a signature block along with the date and the time:
{{Sig1_es_:signer1:signature}}
{{Date_es_:signer1:date}}
{{Time_es_:signer1:calc(now()):format(Date,”hh:nn:ss tt”)}}
So, in the instance where it shows the {{Time}} block, the calculation would be broken down as follows:
{{Time_es_:signer1:calc(now()):format(Date,"hh:nn:ss tt")}}
"calc" tells the app to calculate, "now" returns the date and time when the signature is signed. Along with the Date, you also get the hours(hh), minutes (nn), and seconds (ss). The "tt" at the end designates the AM or PM status whereas if you wanted to use Military or 24-hour time, you'd drop the "tt" and simply use "HH" in place of the "hh".
I hope this answers the question for you and if there are any other questions in follow-up to this, feel free to ask!
Also, for additional information on text-tagging, feel free to check this link.
ODG.

How do you change the setting in iTunes for the time-space between songs in your playlist?

I need help changing my setting in iTunes, the time-space between songs. In setting up iTunes I selected the "three-second" and now wish I'd selected "five-seconds". Any help will be appreciated. Thanks.

Thank you Chris.
This was not the exact solution for my problem but by misreading your instructions I accidentally found the answer. Just as simple as you suggest. I had already ensured the Crossfade was unchecked in iTunes. What had actually changed with the last software update was the settings on my ipod. I can't believe I never checked this before.
The solution:
ipod settings > Playback
Audio Crossfade = "Off"

How do you change the time signature in Ultrabeat? I want to record something in 3/4. Thanks

Hello,
I want to record a song in 3/4 using Ultrabeat. I can't figure out how to change the time signature in Ultrabeat. Any ideas?
Thank you,
Evereman

Hi
You need to take into account the Resolution (how big is each step) and the number of steps (the Length)
For example, with a resolution of 1/16, one bar of 3/4 would be 12 steps, 2 bars 24, etc
You can set these parameters at the bottom of the UB interface
CCT

Timer works if I set the time before the current one

Hi,
I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
Here's the segmant:
private class ButtonResponder implements ActionListener
          public void actionPerformed(ActionEvent event)
                if (event.getSource() == exitButton)
                              System.exit(0);
               if(event.getSource() == setButton)
                    int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
                    int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
                    Calendar calendar = Calendar.getInstance();
                    calendar.set(Calendar.HOUR_OF_DAY, hour);
                    calendar.set(Calendar.MINUTE, min);
                    calendar.set(Calendar.SECOND, 0);
                    Date time = calendar.getTime();
                timer = new java.util.Timer();
                    timer.schedule(new TimerTask()
                         public void run()
                              JOptionPane.showMessageDialog(null, "it is time");
                    , time, 5*1000);
               if (event.getSource() == cancelButton)
                    timer.cancel();
          }So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
Message was edited by:
Octavian

Bump the day if the time is less than current time.
Kaj

Setting the Time Ruler to BPM? Premiere CS3

Hi everyone,
is there a way to set the time ruler in the edit window to a bpm grid?
This would be awesome for Music Video Editing!
If a Band plays to click, you could easily enter the Bpm for the song and cut in a very quick way along the grid.
thank you for any advice!
-dom

Unfortunately, no.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

Can't set the time on the 6500 Slide

I just bought a 6500 slide and can't do one of the most basic things - set the time!
I have gone to auto-update but it is shows the wrong time.
At the time I purchased the handset the sales assistant turned the phone on to check if my sim card was working but he may have saved the incorrect date and time.
I have managed to save the correct date but can't for the life of me now save the correct time.
Can anyone help?
So simple but yet I can't figure it out.
Thanks.

Hi racheljc,
Try this:
Menu
Settings
Time and date
Time
From there, you should be able to change the time.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

How do I set the time in icloud mail?

I have tried to set the time zone in my account. It show CST, but is 2hours behind time and I cannot get it to change.

Hi...
On a Mac for the time zone, open System Preferences > Date & Time > Time Zone
For an iOS device, tap Settings > General > Date & Time > Time Zone

Setting the time on 1300 bridges

stupid question, how do you set the clock on the 1300 bridges, specifically the 1310?

kieran
two issues
one the Cisco AP's do not have a clock like your PC if you set the time manually when the AP loses power or reboots the time is reset to the default and you need to set it again.
te]wo the better solution is to designate a time server for the AP to syncronize to.
either method can be configured by clcking services on hte WEB interface and then select NTP or SNTP depending on you IOS version. then entering the time server IP address in the proper box or typing in hte proper date and time in the fields below, if you select the time server method the date and time will be filled in automaticaly once the time is syncronized.
HTH
Bill

How do i set the time frame of a waveform chart programmatically to be a 30 sec window or a 24 hour window

i'm using LV7.0 and what i need to do is to be able to set the time frame or range of a waveform chart programmatically before i start taking and plotting data. sometimes this window needs to be 30s wide and sometimes it needs to be 24 hrs wide. (in the first reference, i need the chart to fill up with 30s of historical data then the whole chart scrolls with each new data point). the data acquisition records data at a rate of once per second. i've tried to use the chart properties of XScale.offset, XScale.Range.Minimum and XScale.Range.Maximum but no matter what i do the time-stamp on the x-axis is always "00:00:00 PM" and "MM/DD/YYYY" even though values are seen being plotted on the right side of the chart as expected.
Attachments:
BX0265 ShelfLife DAQmx.vi ‏120 KB

Okay, there seems to be some confusion here -- the X axis values are of type double, but they can be represented in the HH:MMS MMD:YYYY format if you want in which case it interprets the floating point as the number of seconds since 6pm Dec 31, 1903.
You can programmatically set this value using the XScale.Minimum and XScale.Maximum properties, but note that if you wire a waveform to the chart after setting these values the t0 parameter will override what you set using the property node for XScale.Minimum. If instead you leave the t0 parameter empty you can use the XScale.Offset property and wire the same value in that you wire to XScale.Minimum. Changing the amount you add to XScale.Minmum to obtain what you wire into XScale.Maximum will determine the time window size.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

Setting the time to UTC?

Okay my local time is 1 hour behind. My UTC time is correct. In /etc/rc.conf iI have "HARDWARECLOCK="UTC" but everywhere the time is displayed its in local time? Is there a way to set the time to UTC system wide?

Are you dualbooting windows btw? If you are, keep HARDWARECLOCK at localtime

Can I set the time ruler in the main window to minutes/seconds/milliseconds?

Is there a way to set the time ruler in the MAIN window to minutes/seconds/milliseconds?
It seems that the only ruler time display option is minutes/seconds/frames/subframes.
Or, failing that, is there a way to suppress the display of frames/subframes?
I have already figured out how to set the main ruler to time, and the LCD to minutes/seconds/milliseconds…it's just a matter of having that in the ruler as well.
Thanks.

To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41

Anyway to set the time signature mid song?

Similar Messages

Maybe you are looking for