Anyway to set up automatic saving or recover the project when FCP quit

I am rather perturbed at the fact that the last 5 hours or so of work has gone up in smoke. Not the biggest deal in the world, because I remember most everything. However, is there a way to save automatically or even recover the file before the app quit responding?

Yeah, it can be "apin" in the butt, but having it save every 10 min for me has been great. I can do a lot in 10 min.
Shane

Similar Messages

  • I want to forward a message with the default headers included, but can't seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers?

    I want to forward a message with the default headers included, but can’t seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers?  What I'm trying to do is report SPAM and add headers to a spam message to forward to sites that go after the spammers.

    Did you check the article and the add-on mentioned there?

  • Running mac OS 10.5.8, Using Mail 3.5, Text encoding set to Automatic. messages arrive, but the message is 200  lines of alphanumerics. Top says Content-Type: text/plain;      charset=utf-8 Content-Transfer-Encoding: base64.

    I use Mail 3.6 and some incoming email messages start with
    Content-Type: text/plain;
        charset=utf-8
    Content-Transfer-Encoding: base64
    then go on to 200+ lines of alphanumerics (mostly upper and lower case letters). 
    What causes this problem, how can I fix it?
    Text encoding is set to Automatic, and  I'm not using any fancy fonts.  Senders are usually
    sending from PCS that may well use Outlook.
    Rosemary C.  Chicago

    Does it look something like this...
    JVBERi0xLjYNJeLjz9MNCjMyNCAwIG9iag08PC9GaWx0ZXIvRmxhdGVEZWNvZGUvRmlyc3QgNi9M
    ZW5ndGggMTU4L04gMS9UeXBlL09ialN0bT4+c3RyZWFtDQohx6hAp7lMT4WVkGpP6z3UpIQfO4eN
    QRbgjhTqX5mfaabWcvQk/hLnUX6MpKiXwist+RiaiGrzj8XGSNFXuvETWsnoPoV687Exvzo1KYV4
    jIuPmKXlRJvESTE/K2htJihPMS/o6fo3i+nHbTBRWpyrXSfmCPVEgsAzcyECvSU0Rz4MJsEXpdu6
    6u/hg1hlPkb2gpkUQJv50YtWhkD/Jg0KZW5kc3RyZWFtDWVuZG9iag0zMjUgMCBvYmoNPDwvRmls
    Check Mail>View>Message, does it say View Raw Source, Long Headers, or Default Headers?
    See if view Plaintext version helps.

  • Automatic saving of actual end-time when saving an activity in SAP CRM

    Dear SAP Experts,
    is it possible by standard when saving an activity that the end-time of the activity is the moment when document is saved the first time?
    Within the Date Profile '000000000001' it is possible to define the duration 'A_PLANTOTAL' 3 minutes but I want to have the exact time when saving the document for the first time.
    Is that possible by Standard? I am seeing the problem that when document is changed and reopened again that endtime will change again.
    Best Regards
    Oliver

    Hi,
    Try to use BADI ORDER_SAVE to do this. Call FM CRM_ORDER_SAVE to update.
    Best regards,
    Caíque Escaler

  • How to recover the database when some of the archive log file get deleted.

    I am facing a problem with Oracle database, which is related to archivelogs.
    Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
    When the database was in running condition, disk got full, so some archivelogs were deleted manually.
    After this they restarted the DB, and now DB is not coming up. Errors are as follows:
    SQL> startup
    ORACLE instance started.
    Total System Global Area 1444383504 bytes
    Fixed Size 731920 bytes
    Variable Size 486539264 bytes
    Database Buffers 956301312 bytes
    Redo Buffers 811008 bytes
    Database mounted.
    ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
    SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
    ORA-00283: recovery session canceled due to errors
    ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
    SQL> recover database using backup controlfile;
    ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
    1
    ORA-00289: suggestion :
    /export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
    ORA-00280: change 215548705 for thread 1 is in sequence #1107
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    /export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
    ORA-00308: cannot open archived log
    '/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    CANCEL
    Media recovery cancelled.
    SQL>
    1. How to recover the database and bring it online
    Any help will be highly appreciated.
    With Regards
    Hemant Joshi
    Edited by: hem_Kec on Sep 7, 2008 9:07 AM

    Hi,
    Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

  • Automatically saving edits in the DNG

    One of the reasons I import to DNG is the ability to save my edits directly in the DNG. According to Adobe Tech Support, selecting Automatically wite changes into XMP should do just that. However it does not work.
    Using Ctrl + S in library mode is also supposed to write your edits to the header of the DNG. Then you should be able to take ycopy your dng and re-import it in other lightroom environments without concern for copying the entire LRCAT. I have done this with some success. Unfortunately a great deal of the time I get an error message "Writing XMP metadata did not complete successfully" with only a portion of the files containing the edits.
    Is there a fix to this bug.
    Jim

    Hello Ian,
    First I thought about the word "bug" and regretted using it immediately after I clicked the post message button. I understand that everything will not be saved. However, when I do get a successful save all the edited information is in the DNG, it can be imported into another version of Lightroom on my notebook without the lrcat. I tried to send you an example of a successful save but the forum will only allow up to a 5mb file and my dng files are all over 20mb
    1. All files are in the same directory.
    2. None of the files are write protected.
    3 All files are on-line (accessible)
    The most successful save was 6 out of 30 files selected when I pressed Ctrl+S. Today I have not been able to save any files successfully without the error message.
    Just an fyi, I have been using Lightroom since it came out. Unfortunately, until recently I have not been an active forums participant. I have been a professional photographer for 40 years. Originally, Lightroom was such a change in paradigm for me that I wrestled with it constantly. Now I do not know what I would do without it. So now I plan to become more active in the forums community. However, first I need to get answers to all those hidden irritations that have bothered me for a long time. This is one of those irritations.
    My purpose wanting to find out why this intermittently works this is that I am also a teacher. I need to be able to edit the files on my computer at my home office and them transfer them to my notebook to take to school for class lectures. I would like to do this without transfering the lrcat and let Lightroom create a new lrcat when I do the import. In addition, my students who have access to Lightroom on the schools computer need to be able to take their dng files, with their edits with them. School policy is to clean the data areas at least weekly. The new semester stars in a couple of weeks and it would be nice if some of my nagging questions can be solved.
    Anything you can do to help me figure out why I cannot consistantly save the edits directly in the dng would be really helpful.
    Jim

  • ISP has floating IP and changes several times a day - how do I set Foxfire to automatically detect and update the IP when I attempt to open the browser?

    If I log off my ISP automatically changes the IP address, when I used Windows Explorer I was able to tell it to automatically detect the new IP so I did not have a problem. With Foxfire I have to manually go out get the new IP and then open the browser - this is a PIA.

    When entering the URL either as your home page or new tab page, I suggest using the full URL https://www.google.com/ since otherwise there is a slight delay as Google redirects Firefox to the secure page.

  • If i have to close Firefox after attempting to load a page locks the machine up, what setting can i change where it will not automatically try to reload the page when i restard the browser?

    Say i try to open a pdf link for example (although not limited to) and Firefox stops responding; if i close the browser and open it again, it will attempt to reload the same page that just locked it up. How do i turn this off? I get the "Well, this is embarrassing." error fairly often (after 'end task'-ing twice) :/
    == This happened ==
    A few times a week

    What page crashes Firefox? On the "Well, this is embarrassing." page you could choose to restore all pages except for this "bad" one.
    If I knew what page it is, maybe, I could help more.
    You can also
    Help->Report Broken Website...
    Besides, you can also update Java.
    If the problem is caused by JavaScript, you could install [https://addons.mozilla.org/en-US/firefox/addon/722 NoScript].
    <u></u><u></u><u></u><u></u><u></u>
    To change what pages are opened on each start-up/restart (whether a crash occurred or not), you can go to
    Tools->Options->General->Homepage->You can change which page to use on start-up.

  • Anyway to set a HEX WEP password on the airport extreme?

    The input area only allows you to enter 13 characters and doesn't accept the 26 hex ones required. Any other way to do this? I have the current version of the utility and firmware for my box. I also have other vendors ap's that already have the hex code so I need to keep it the same. Thanks.

    wavesonar, Welcome to the discussion area!
    Do you have the round 802.11b/g AirPort Extreme base station (AEBS) or the square 802.11b/g/n AEBS?
    I'm confused by what you are attempting to do. The AEBS is creating the wireless network. Therefore it is in control of the WEP password. You can enter the password you want.
    Are you trying to get the AEBS to join a wireless network? This will only work if your wireless network is created by another AEBS or an AirPort Express (AX) and they are both configured to use WDS.

  • Saving Clips to the Project Panel

    When I was working on a video on another machine, I was able to dragon clips from a sequence into the project panel, allowing me to save subclips for later use. But now that doesn't seem to work. I get a little + below my mouse, but it doesn't add the clip.
    I am using the trial version. Is this feature not available to me?

    If you click on the text it will bring the playhead to that position.

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • Recover iMovie project after crash?

       After working on a video project for 20 hours and inserting over 50 slides into the video with custom Ken Burns' effects, iMovie unexpectedly crashed on me.  I was under the impression that iMovie '11 (9.0.4) backed up my work automatically much like Pages now does, so I didn't bother saving as I went (duhh!).  I only needed to insert the opening title for it to be complete.  I plugged in an external USB hard drive to check a file, and iMovie unexpecedly crashed.  The project reverted back to the last time I saved it a couple of days ago.  After recovering from the intial shock, I'm guessing that I've just learned a very hard lesson about saving and backing-up, but thought I'd throw this one out to the iMovie community to see if there's anything else I can check to possibly recover the project before I dig real deep and start all over agan.  Any ideas, or am I just out-of-luck?  -Bob-

    Recover and open are different things.. are you trying to recover a project .. saved in TM backup.. then you need to restore the file.. you cannot open it from inside a TM backup.

  • IMovie '11 How do I recover a project that appears within the IMovie Projects folder but does not show in the Project Library?

    I have had my MBP for just over 3 months now!  Yes, I made the switch and up until now I have been quite happy.
    I now have my Time Capsule, Apple TV running and am generally getting used to life as a Mac user.............even bought Aperture and loaded all the family photos.  Now time to make some Travel movies.
    I have been working on a particular IMovie project for a few weeks now.  Size is 365MB.  Yesterday I closed IMovie and when accessing later that project is not available in the Project Library window.  It does appear in the IMovie Projects folder but I cannot open it.  I have copied the file to DVD just in case.  All up I have 4 Projects, the other 3 are practice files, smaller but they do appear in the Project Library.
    I have scoured the bulletin boards and tried many suggested fixes to no avail.  Main suggestion was to remove the following files from Library/Preferences
    com.apple.iMovieApp.plist
    com.apple.iApps.plist
    However, this did not sort out my problem.  In the end I put back the original files.
    Does anyone have a straightforward fix for my problem or is this one of those ongoing issues that that needs Apple's attention. 
    After all the file is there with the others.  They are available.
    I realise that I can restore from Time Capsule but I am missing the last three days thanks to 'drop out'.
    Thanks.......

    Gweggie Boy wrote:
    Yes, considering we have an ongoing 'glich' within an Apple program with no obvious solution, we should be able to direct it straight to an Apple rep.  I will peruse this possibility when I get a moment.
    You can report the problem by providing feedback to Apple. In the iMovie app, from the menu select iMovie > Provide iMovie Feedback. This will take you to an Apple page where you can complete a form and submit it to Apple.
    The fix for this will probably turn out to be simple/easy.....................so why doesn't Apple comment and/or address it????
    Other than the forum moderators, Apple doesn't normally monitor these forums, nor make comments on posts. So, it's up to us to report the problem to them directly (using the feedback form mentioned above).
    As the problem has affected me just the one time (touch wood), I haven't bothered to report it as yet. But, after seeing your posts on this, I'm now reconsidering that. Something must be triggering it. My system is in pretty good shape, so I'm guessing it must be a glitch of some sort, either in Mountain Lion or in the iMovie app itself. Perhaps it's a 3rd party app causing the problem? It doesn't give us much confidence now, in that we may start worrying about losing other projects.
    A good practice is to duplicate the project from time to time (something I'll be doing more of), although Time Machine backups also provide the necessary security. To duplicate, in Project Library view (where all the projects are listed) click on the project name so that it is highlighted, then select File > Duplicate Project. Alternatively, right-click (or Control-click) on the project name and select Duplicate Project from the pop-up menu. Of course, you may already know this. Duplicating probably won't guarantee that the copy will not also disappear from the Project Library, but is worth doing anyway.
    As I mentioned in the post I linked to earlier, when the problem arose with my iMovie project I was using ProRes 422 clips I had imported from a Final Cut Pro X Event. My immediate thought was that ProRes 422 had caused the problem. But this of course may have been coincidental - reinforced now by your experience, where you are probably working with Apple Intermediate Codec (AIC) clips.
    Anyway, glad to hear that you've recovered your project through Time Machine. Unfortunately, I had to start from scratch as I had Time Machine turned off during my editing sessions (that's a story for another day).
    John

  • Set a custom duration field using VBA throws the message "Invalid duration" when reopening the Project

    With a custom code we set Duration9 in Project 2013.
    After executing the code everything seems to be ok.
    After saving and reopening the Project it shows a message "Invalid Duration", and the value is shown as estimated (Questionmark).
    In VBA create following code:
    Sub SetDuration()
        Dim newVal As Long
        newVal = 14400
        Tasks(1).Duration9 = newVal
    End Sub
    Execute Code.
    Close VBA.
    Open the Project and you will get the same message box
    The only way as far as I found out is to manually retype the Duration in that field. What is not exactly what I want.
    Is this a bug in MSP or a hidden Feature? Does anyone has an idea?
    Best Regards Steffen

    I was able to replicate what you saw.  I can't explain it per se, but this code seems to get around the issue:
    Sub TESTDUR()
        Dim NewVal As String
        NewVal = "30d"
        ActiveProject.Tasks(1).Duration9 = NewVal
    End Sub
    Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

  • Have updated to Firefox 3.6.8 and therefore can't access my zotero 1.0 bibliography. If I downgrade to Firefox 3.5, will I be able to recover the zotero1.0 bibliography?

    I use zotero 1.0. don't want to update to zotero 2.0 because I would thereby lose the bibliograpny I have built up on my current project. I updated to Firefox 3.6 and was informed that zotero 1.0 was incompatible, so have lost my zotero 1.0 biblio anyway. I want a way to recover the biblio. If I downgrade to Firefox 3.5 will I be able to recover zotero1.0 biblio?
    == This happened ==
    Just once or twice
    == I updated to Firefox 3.6

    Just run the 8.0.1 .exe and it should take care of upgrading your Firefox.
    [[Common questions after upgrading from Firefox 3.6]] might come handy afterwards.

Maybe you are looking for