Anyway to turn off "Apply Auto Tone Adjustments" with Tiffs + PSDs?

Using 1.1 on Mac....
When I view tiffs in Lightroom 1.1 I noticed images are much lighter than when viewing in Photoshop. Is it the preference "Apply Auto Tone Adjustments" being applied? If so is there a way to turn it off for Tiffs and PSDs?

John:
I think I just ran into the same problem in a different venue, and maybe many people are having this problem. I imported a folder of layered psd master files from which I wanted to output prints in the LR print module. (You can see the thread on this forum titled "lightroom output prints are too light"). All of them looked a good stop lighter when viewed in the LR window as compared to when they were opened in photoshop.
After some other diagnostic suggestions that did not yield a solution, Jeff Schewe told me to use the Zeroed preset when importing images, so as to eliminate any develop settings that might inadvertently be turned on. I haven't tried to print yet, but they are importing as I write this and the ones in the LR window look like they match the image when viewed in photoshop. I just checked Lee Jay's advice and did find that I had "Apply Auto Tone Adjustments" checked in the presets preferences. Am not sure why this would override "none" when importing, but evidently it does.
Am also not sure what your issues about syncing are (I didn't even know "Apply Auto Tone Adjustments" checkbox existed till I read your thread), but hope this helps.
Paula Lerner
http://www.lernerphoto.com

Similar Messages

Camera Raw - apply auto tone adjustments ...

In camera raw, "apply auto tone adjustments" option in the preferences dialog is not same with the "auto" button on the basic panel, isn't it?
Both of them control the same sliders, are there any relationship between them?

Maybe, there is a bug for Windows 7 64-bit ... when the "apply auto tone adjustments" option is active on the preferences dialog, the auto button on the basic panel is also active and I'm always getting slightly different results by pressing it.

Is there any way to turn off the auto formatting in Pages? I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way". I HATE this!

Is there any way to turn off the auto formatting in Pages? I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to. But NO! Pages keeps changing the font size! I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size! I am getting SO FRUSTRATED! I've spent over an hour trying to get the stupid program to let me just type my letter! Can anyone help?

The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
You're welcome Rich. Glad to help.
Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
Mahalo for the and Aloha from Big Island.

Is there anyway to turn off the Group MMS texting? I want to send a mass text but don't want every person to see every other person's response. Please help!

Is there anyway to turn off the Group MMS texting? I want to send a mass text but don't want every person to see every other person's response. I am getting ready to have a baby and want to send one text out to friends and family when the baby comes BUT I don't want all of those people to receive the responses. Can I turn it off temporarily? Please help!

Settings > Messages > Group Messaging > Off

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

How to turn off XLReporter auto startup in SBO 2007

Dear Experts,
Is there any way to turn off XLReporter auto startup in SBO2007?
Much Thanks in Advance!
Warmest Regards,
Chinho

Hi,
There is no default way to stop the XL reporter in 2007 as its integrated.
You can use authorization to restrict access to XL reporter tools,If this doesnt satisfy requirement raise a ticket to sap support.

How do you turn off the auto grid?

How do you turn off the auto grid? I read in a forum that the solution is "View- show- turn off grid". But the weird thing is I had to have that website open to even get the alternative up under "View". If I didn´t, there were other alternatives there. Why?
The second problem is, when I finally got the "Turn off auto grid" alternative up, it will not be unchecked…. I´m working on a mac.
Thank you in advance!
Jeanette

View > Snap To > None.
Nancy O.

How does one turn off link auto-update?

When we have an ID file open in CS6 and make a Photoshop edit, the link seems to auto-update. We don't like this as we'd rather 'watch' the update so if comes in as expected, etc.. Can one turn off link auto-update? Thanks!

Are you making the edit by selecting the graphic frame and then choosing Edit Original? This will always auto-update.
If that's not it, you might try clicking Preferences > General > Reset All Warning Dialogs

In Safari 5.0.6 how do I turn off the auto save to contact list of addresses I send mail to?t

How do I turn off the auto saving to my contact list of every e-mail address I send a note to?

It might help knowing that Apple uses the term "Versions" instead of AutoSave. I have not yet found how to turn it off, but in the meantime, here's how to delete "Previous Versions":
Do one of the following:
If you have unsaved changes in a document, choose File > Revert To, and then click Previous Save.
Hold the pointer to the right of the document title, click the downward-facing arrow, and then choose Browse All Versions from the pop-up menu.
Click a gray tick mark along the timeline on the right to display various versions of your document.
Do one of the following:
To restore your document to the state of a particular version, display that version, and then click Restore.
To delete the displayed older version, hold the pointer to the right of its title, click the downward-facing arrow, and then choose Delete This Version. To delete all older versions, press the Option key while holding the pointer to the right of the older version’s title, click the arrow, and then choose Delete Old Versions.
To create a new untitled document that duplicates a particular version, display the version, press the Option key, and then click “Restore a Copy.”
To leave your document in its current state, click Done.

How to turn off email auto forward?

I have a 3G iphone and it's set up to retrieve email from my gmail account. I don't know how, but it has started trying to auto-forward my email to another account (my work blackberry). The emails don't go through so I keep getting a failure to send message for each email I have been receiving. I looked in settings and I don't see anything set up to forward email, I'm not sure how it started in the first place. How can I turn off the auto-forwarding?

The forwarding would not be on your iPhone but on your GMail account. Using a browser, go into your Gmail settings and look at one of the top tabs that says "Forwarding and POP/IMAP" Turn off forwarding there.

How do i turn off the auto delete when played feature in new update?

how do I turn off the auto delete after playing an item in latest update?

After the disaster of iTunes 11.1 that deleted nearly all my archived podcasts (recovered from backup thankfullly) I was shocked, but not altogether surprised, to see that the option to delete played episodes has been enabled/re-enabled by default.
From the lower right of the Podcasts window click Settings then, if needed, click Defaults, then turn Delete Played Episodes to Off.
Why set the destructive option as the default?
I have many episodes that I want to keep that are no longer available at their feed so the last thing I want is any automatic delete process to be enabled.
tt2

How do i turn off the auto lock feature? In my options it does not have "never" on it. It is only timed amounts.

How do I turn off the auto lock feature. I have only timed options. There is not the "never" option available.

I've got options for 2, 5, 10, 15 minutes and Never. Have you got an Exchange email account on your iPad ? 'Never' can be removed so as to protect a company's potentially sensitive email - they may not want the iPad being left/stolen with the emails on it accessible. If you remove the account the Never option will probably reappear

How do I turn off text auto-formatting in Keynote?

How do I turn off text auto-formatting in Keynote?

You may uncheck some preferences in the Pages > Preferences menu item.
You may also define your own custom default template.
But you certainly are aware of that because it's described in the PDF User Guide delivered with every copy of iWork.
Yvan KOENIG (from FRANCE mercredi 27 août 2008 18:06:16)

How do I turn off the auto-locator?

I can no longer get to Yahoo.com which now always defaults to Yahoo.de, the German Yahoo. When I change it to the American one it immediately goes back to the German. I am American but live in Germany. I thought if I turned off the auto-locater I might be able to access Yahoo.com again so want to try it. How do I turn it off?

Hi,
I don't think Private Browsing is the issue, rather the locator and when I click on the link you provide I get an error message like this:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://kb.mozillazine.org/About:config
The following error was encountered:
Connection Failed
The system returned:
(110) Connection timed out
The remote host or network may be down. Please try the request again.
Your cache administrator is root.
Generated Thu, 24 Apr 2014 16:07:15 GMT by sunrise-squid.mz.osuosl.org (squid/2.5.STABLE11)

How do i turn off the auto bcc function on ipad mail? i have turned it off in settings but it keeps happening.

I want to turn off the auto bcc function in ipad mail. I have done it in settings but it keeps happening. surely this is a fault or there is an easy way to fix the problem.

I've got options for 2, 5, 10, 15 minutes and Never. Have you got an Exchange email account on your iPad ? 'Never' can be removed so as to protect a company's potentially sensitive email - they may not want the iPad being left/stolen with the emails on it accessible. If you remove the account the Never option will probably reappear

Anyway to turn off "Apply Auto Tone Adjustments" with Tiffs + PSDs?

Similar Messages

Maybe you are looking for