Anywhere Access - CERTIFICATE NOT VALID OR PASSWORD INCORRECT

Setting up Server Essentials 2012. During the "Anywhere Access" wizard I followed a link to get an SSL for the company's URL that is directed at the server. I chose one of the two options that was presented during setup and purchased a "SSL
Cert for SSL Certificate - Comodo Essential" from Enom Inc.
Once I got the certificate in email, and continued the wizard I get the following error:
CERTIFICATE NOT VALID OR PASSWORD INCORRECT
Either the certificate is not supported or the password is incorrect. Please try again.
I've tried everything I can to get it in the wizard to no avail. If I manually push it into the certificate manager it accepts it there properly but the Essentials Dashboard still thinks it's no installed so I believe I have to complete this wizard. I
cannot find ANY support on this currently on the internet on searching. Anyone able to help?
(By chance the server is also unable to install two critical updates. I am taking things one at a time in the order they come right now though.)
KevenD.

The PFX file is only allowed in the wizard if you are importing a previously created SSL. Here's the steps that got me to the dead end I'm in:
Step 1 - Setup process - Set up Anywhere Access
Step 2 – It asks what domain name we have pointing to the server, configures the firewall routing services etc and then gets to the SSL portion which I will depict below.
Step 3 – Domain Set up in the Anywhere Access wizard: Entering name of our domain to use.
Step 4 – SSL Certificate set up. I select “I want to purchase..”, clicked on the two links provided, decided on one from eNomCentral and made the purchase.
Step 5 – Cert request is issued and a link to GoDaddy and eNomCentral are given. It was eNomCentral which sold me on the Comodo SSL.
Step 6 – Park and wait.
The next time I go into the wizard to continue (once the certificate was issued) I get the errors I earlier depicted from the wizard stating:
CERTIFICATE NOT VALID OR PASSWORD INCORRECT
Either the certificate is not supported or the password is incorrect. Please try again.
I get two methods of importing it, copy/paste or upload. I've tried both methods and each generates a different error.
KevenD.

Similar Messages

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not.

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not. Any idea what is wrong here and how I can reset my password. I don't have a start up disc. Thanks very much

From System Preferences/Help:
Reset your login password using your Apple ID
Before you can use your Apple ID to reset your login password, make sure that FileVault isn’t enabled on your computer.
Also make sure that an Apple ID is associated with your user account, and that an administrator has given you permission to reset your own password using an Apple ID. For more information, see this help topic:
Associate Apple IDs with your user account
Make sure your computer is connected to the Internet.
In the login window, click the question mark in the password field, and then click the arrow in the dialog that appears.
Enter an Apple ID and password, and then click Reset Password.
I don't know if it works.

N79 NAM RM350 server certificate not valid "firmwa...

i have updated my phone frm v11 to v20 but nw wen i go to devices update to update to latest firmware
it says " SERVER CERTIFICATE NOT VALID"
i want to update to v30 plzz help anyone
reguards
zain
Message Edited by kaskay on 21-Aug-2009 10:42 AM

i am not sure that v30 had been released for nam devices, if it has have you tried NSU ?
http://europe.nokia.com/get-support-and-software/download-software/device-software-update
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

SSL certificate not valid

Just started receiving 'server's security certificate not valid for palm.imap.mail.yahoo.com' error early this morning. I have a (Sprint) Palm Pre (P100EWW) on version 1.4.1.1. How do I correct?

I have tried removing palm and still cannot get it to work! any other ideas? I did notice it changed the port to 995 when I first was entering my email info. It used to be set to 993?
Also, what do you put in the username.... is that the beginning part of the yahoo id prior to @yahoo.com?

This Certificate not valid for the selected purpose

I have installed on my Windows 7 (64 bit Professional w/SP1)
a Self-Signed CA (IDS_MstrCert)  that has been accepted by the system certificate "store". via mmc & certmgr
I generated this CA on my Redhat Linux 7 server using the openssl utilities.
It shows: This certificate is intended for the following purpose(s):
All issuance policies
All application policies
It is enabled for ALL purposes (However I did not generate with ALL purpose set)
Under Certification Path:
Certificate Status: This Certificate is OK
I have also installed a Client Certificate (winxclient) (also generated by my Redhat Linux 7 server)
That has been "signed" by my CA (IDS_MstrCert)
I added it successfully to the system certificate "store" via mmc & certmgr.
However when I open the certificate I see the following message: This Certificate not valid for the selected purpose
When I view the Certificate path I see the following:
IDS_CA                          (friendly name for the CA)
    |-----> VPNIKEv2cli     (friendly name for the client certificate)
    Certificate Status: This certificate is OK
In the Intended Purposes field: ServerAuthentication, ClientAuthentication
How do I resolve this problem ? This Certificate not valid for the selected purpose
When I attempt my vpn/ikev2 connection (using machine certificates) I get the 13806 error.
Best Regards
Guy Rich

Hi,
In my opinion, this is not Windows system problem. You need to make troubleshoot with the Certificate.
I made a research with this error message, the link below might be helpful:
http://support.persits.com/show.asp?code=PS030304105
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2012 R2 Essentials - Anywhere Access will not install. Including Remote Web Access portion.

After setting up 2012 R2 Essentials, I attempted to go through the dashboard's "Set up Anywhere Access" wizard. I was able to configure a domain name successfully on remotewebaccess.com but when the wizard attempted to enable the "Remote Web
Access" feature, the wizard flashes a couple of statuses and locks up on verifying and then the entire dashboard crashes. When I go to the event logs, there is only a mention of dashboard.exe having an exception error. I have also delved into the dashboard.log
file and found the following error where it throws the FATAL crash:
Dashboard.Forms: !!!!FATAL: Dashboard shutting down due to unhandled exception: The 'Get-WindowsFeature' command was found in the module 'ServerManager', but the module could not be loaded. For more information, run 'Import-Module ServerManager'.
[11024] 140624.234737.2917: Dashboard.Forms: System.Management.Automation.CommandNotFoundException: The 'Get-WindowsFeature' command was found in the module 'ServerManager', but the module could not be loaded. For more information, run 'Import-Module ServerManager'.
---> System.Management.Automation.CmdletInvocationException: Length cannot be less than zero.
Parameter name: length ---> System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
I have launched PowerShell and executed the "Import-Module ServerManager" along with the "Get-WindowsFeature" command and it returns the list of available and installed features. I have also tried rebooting the server and attempting the
wizard numerous times and all attempts result in the same error above. Does anyone have an idea of what could be causing this? I have searched google, bing, and the technet similar questions but none have a solution that will allow me to use the wizard to
enable the Remote Web Access feature.

I had a similar issue, it does appears to be caused by MyMovies 5.
I removed MM5 but the dashboard would still crash after opening the Anywhere Access tab and when it had been running the 'Updating' status for a bit. going through the dashboard log I found that just under the line about the Get-WindowsFeature error was
a comment 'atMyMovies.Common... full error as follows:
[5616] 140701.125213.3686: Dashboard.Forms: !!!!FATAL: Dashboard shutting down due to unhandled exception: The 'Get-WindowsFeature' command was found in the module 'ServerManager', but the module could not be loaded. For more information, run 'Import-Module
ServerManager'.
[5616] 140701.125213.3686: Dashboard.Forms: System.Management.Automation.CommandNotFoundException: The 'Get-WindowsFeature' command was found in the module 'ServerManager', but the module could not be loaded. For more information, run 'Import-Module ServerManager'.
---> System.Management.Automation.CmdletInvocationException: Could not load file or assembly 'Microsoft.Windows.ServerManager.PowerShell' or one of its dependencies. An argument was out of its legal range. (Exception from HRESULT: 0x80131502) ---> System.IO.FileLoadException:
Could not load file or assembly 'Microsoft.Windows.ServerManager.PowerShell' or one of its dependencies. An argument was out of its legal range. (Exception from HRESULT: 0x80131502) ---> System.ArgumentOutOfRangeException: Length cannot be less than zero.
Parameter name: length
   at System.String.Substring(Int32 startIndex, Int32 length)
   at MyMovies.Common.AssemblyResolver(Object sender, ResolveEventArgs args)
   at System.AppDomain.OnAssemblyResolveEvent(RuntimeAssembly assembly, String assemblyFullName)
   --- End of inner exception stack trace ---
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadBinaryModule(PSModuleInfo parentModule, Boolean trySnapInName, String moduleName, String fileName, Assembly assemblyToLoad, String moduleBase, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags
manifestProcessingFlags, String prefix, Boolean loadTypes, Boolean loadFormats, Boolean& found, String shortModuleName, Boolean disableFormatUpdates)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadModuleNamedInManifest(PSModuleInfo parentModule, ModuleSpecification moduleSpecification, String moduleBase, Boolean searchModulePath, String prefix, SessionState ss, ImportModuleOptions options,
ManifestProcessingFlags manifestProcessingFlags, Boolean loadTypesFiles, Boolean loadFormatFiles, Object privateData, Boolean& found, String shortModuleName)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadModuleManifest(String moduleManifestPath, ExternalScriptInfo scriptInfo, Hashtable data, Hashtable localizedData, ManifestProcessingFlags manifestProcessingFlags, Version version, Version requiredVersion,
ImportModuleOptions& options, Boolean& containedErrors)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadModuleManifest(ExternalScriptInfo scriptInfo, ManifestProcessingFlags manifestProcessingFlags, Version version, Version requiredVersion, ImportModuleOptions& options)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadModule(PSModuleInfo parentModule, String fileName, String moduleBase, String prefix, SessionState ss, Object privateData, ImportModuleOptions& options, ManifestProcessingFlags manifestProcessingFlags,
Boolean& found, Boolean& moduleFileFound)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
   --- End of inner exception stack trace ---
   at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
   at System.Management.Automation.PowerShell.Worker.ConstructPipelineAndDoWork(Runspace rs, Boolean performSyncInvoke)
   at System.Management.Automation.PowerShell.CoreInvokeHelper[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)
   at System.Management.Automation.PowerShell.CoreInvoke[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)
   at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)
   at System.Management.Automation.CommandDiscovery.AutoloadSpecifiedModule(String moduleName, ExecutionContext context, SessionStateEntryVisibility visibility, Exception& exception)
   --- End of inner exception stack trace ---
There was a couple of line before the fatal error suggesting it could be to do with the remote deskop gateway configuration...
   at Microsoft.WindowsServerSolutions.Common.RemoteDesktopConfig.RemoteDesktopConfigLib.IsFeatureAvailable(String featureName)
   at Microsoft.WindowsServerSolutions.Common.RemoteDesktopConfig.RemoteDesktopConfigLib.CheckTSRelatedRolesAvailable()
   at Microsoft.WindowsServerSolutions.Connectivity.Jobs.TsGatewayDiagnosticsJob.OnRun(DiagnosticsResult result, ConnectivityEnvironment environment)
   at Microsoft.WindowsServerSolutions.Connectivity.DiagnosticsJob.RunAndCatch(DiagnosticsResult result, ConnectivityEnvironment environment)
So I ended up removing the role using server manager, along with the remote access role, and then rebooting the server. I then added the Remote Access role back in by choosing the 'DirectAccess and VPN (RAS)' option.
When I then ran the dashboard Anywhere Access setup it worked.
Other issues that seemed to cause the dashboard to crash was when I released the remotewebaccess.com domain name and then added it back in. I had multiple certificates with the same name which seemed to cause an issue. so I released the domain name again,
went into the certificates MMC and removed any of the goDaddy certificate. then configured the domain name again and the rest of the wizard ran with no issues.
Hope some of this helps...

Apple ID, registered yesterday - never received a confirmation email but when try to sign in says username or pass not valid. Password /username reset doesnt work! When I try to re-register it says that my username is already in use! ?

Hello!
I tried to create an ID account a few hours ago using my current email address in order to use ibooks. I completed all stages and even provided my visa card - I received a message from my bank that 'my visa was authorized for an indicative amount Euro1.00 @ Apple' BUT I never received an email in order to verify my apple ID.
Please note, at that moment of my registration there was something wrong with my internet connection and I not sure if the registration process was 100% completed. I then tried to sign in using my email address and it says that my username or password is not valid. I tried all procedures to reset password/username but it doesnt allow me to do anything - since it doesnt recognize my name or my date of birth/security question. Then I tried to create the ID again, doing the procedure from the beginning but then it says that my email account (username) is already in use. I am blocked here and cannot use my email to register! (I registered with my old email address so I can contact you here). Any advice? Thanks in advance.

I think you should contact Apple support and explain the problem to them. It's not unknown but it might have a security side to it. Better safe than sorry.
Apple - Support - Apple ID - Contact

Unable to Sign In - Username not found or password incorrect

Ok....don't get it. Just got the ATV2 today. However, everytime I try to setup home sharing...I put in my itunes iD and password (same that I used to setup home sharing in Itunes) I get the error message that username is not found or password is in incorrect. Yet its the correct ID and password. I updated Itunes this morning to the 10.0.1.22
My ATV1 is recognized by my Itunes just fine.....using the same wireless network. Yet..ATV2 has an issue. I checked the network settings...all hooked up. I can view movie and TV titles on Itunes....but it won't take my user id or password.
What's up apple?

The way I fixed it was:
Settings -> General -> Network
There I selected "Test Network"
during it test its requires you to Authenticate... it took the itunes username/password there when it wouldn't from other screens.
Once the test was complete when I went to TV Shows it then asked if I wanted to use the same itunes id... I selected Yes... and presto it worked.
Be well

Connect to sqlplus not validating username/password

Hello,
I have a sql script that I'm executing on the sqlplus command line after issuing a sqlplus /nolog command.
I'm passing in the username and password, as follows, to connect: 
connect &DBAUSERNAME1/&DBAPASS1 as sysdba;
 
But I do not understand why, if I enter an invalid username or password, it connects me anyways? Why is it not validating the username/password combination I supply?
Thank you,
Laura

Because of your "as sysdba" option. You're connected
like SYS.
SQL> conn sys/oracle@ora102 as sysdba
Connected.
sys@ORA102> conn sys/hello@ora102 as sysdba
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
sys@ORA102>Because you connect locally and os authentification (i.e. your are in the trusted os group) is used. In this case password will not be verified.
Best regards
Maxim

SSL certificate not valid in Safari, but webservice works with Chrome and Firefox

As a MD, I'm used to check blood results online on the service
https://inet.zentral-labor.ch/c16/kunweb.dll - this is the online-portal of my laboratory medica in Zurich. http://www.medica.ch
Access to the loginscreen is public ;-) and should look like this (Screenshot from Firefox)
I've setup a new workstation 3 weeks ago (iMac with OS Lion 10.7.4), and this webservice service works fine till yesterday. Now, Safari is every time we try to reach the service telling us, that this service needs a certificate, we can choose only a default apple certificate
and then, the error is:
This Site needs a valid SSL-Client-Certificate... (Screenshot below)
What's wrong with Safari? With Chrome and Firefox, the webservice works fie without any problems.
Thanks for an advice
MD Patric Eberle

As a MD, I'm used to check blood results online on the service
https://inet.zentral-labor.ch/c16/kunweb.dll - this is the online-portal of my laboratory medica in Zurich. http://www.medica.ch
Access to the loginscreen is public ;-) and should look like this (Screenshot from Firefox)
I've setup a new workstation 3 weeks ago (iMac with OS Lion 10.7.4), and this webservice service works fine till yesterday. Now, Safari is every time we try to reach the service telling us, that this service needs a certificate, we can choose only a default apple certificate
and then, the error is:
This Site needs a valid SSL-Client-Certificate... (Screenshot below)
What's wrong with Safari? With Chrome and Firefox, the webservice works fie without any problems.
Thanks for an advice
MD Patric Eberle

Timestamped document with expired certificate - not validating

Hi,
I have a document that was timestamped and certified on 2010/11/23 15:32:16 -03'00'. The timestamp certificate is still valid, but the certifier's certificate expired on 2010/12/11 07:00:00 -03'00'.
The Reader can't validate this certificate, eventhough the Security configuration says that it should use the "secure time" and accept expired timestamps.
In "Signature Properties" it says:
The signer's identity is unknown because it has expired or is not yet valid.
In "Certificate Viewer" it says:
The selected certificate has errors: Not time valid
Shouldn't the validation use the timestamp as a source for time validation?
Thanks!!
-RCT.

Hi Melvin,
First check to see if the certificate is in the store
PowerShell: Get-ChildItem cert:\LocalMachine\My\ to list the certs in the store
Screenshot from my desktop
Cheers,
-Ivan
-Ivan

Virus and Certificate not valid??

Hi,
I was having issues with icloud and had to download icloud onto my laptop to retrieve my photos and music. I did this, got my photos and then started getting this message whenever I try to get onto any website except my homepage...
There is a problem with this websites security certificate
The security certificate presented by this website has expired or is not yet valid
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server
We recommend you close this webpage and do not attempt to continue to this webpage.
Then when I log in to iTunes I get this message:
iTunes can't verify the identity of the server 'init.itunes.apple.com'.
The certificate for this server has expired. You might be connecting to a server pretending to be 'init.itunes.apple.com', which could put your confidential information at risk. Would you like to connect to the server anyway?
I have system restored twice
Uninstalled iCloud and uninstalled and reinstalled iTunes.
I don't want to lose my photos and as I have lost photos from icloud before and had apple technicians search their servers to no avail I am worried I will lose any I managed to salvage from facebook and taken afterwards.
I have an ipad also which isn't and hasn't been switched on whilst all this has been happening.
Noticed my phone mentioned secure sites when I was purchasing on the internet yesterday from my iphone.
I am not even slightly technical so any tech jargon used will go over my head but I really need a step by step guide of how to get rid of this and quickly... Please???

I would definitely start with the following:
make sure that your anti-virus software is fully up to date and run a complete system scan
download Malwarebytes (the free version will be fine) and run a complete system scan - this can sometimes detect malware that standard A-V products don't find or quarantine
There may be other reasons for the messages you're seeing but I would suggest that verifying that your machine is "clean" should be the immediate priority.

Certificate not valid

Hi
I have a customer which is using Reader 7.0 Version 7.0.9 english.
We have added the root certificate to his reader and configured that its valid for "Signatures and as trusted root" and "certified documents" in the certificate details I can see that the selected path is valid.
Our problem is, that in our signed invoice the signature is still shown an unknown. I have built up the configuration in our office and here it works. Do you have any idea what can be the problem?
Regards
Thomas

hard to tell, do you see a difference when you disable/enable revocation checking in the Reader's security prefs? (advanced)

Linksysviewer.cab. Security certificate not valid.

I tried to use the online support, but it doesn't seem like it's a known issue. Even though a brief investigation on google shows another reality.
The thing is that when I instal my Linksys WVC54GCA web camera (Serial numer SS5008304361 Firmware: V1.00R24) IE and the other browsers that I use blocks the file linksysviewer.cab since the security certificate ran out in 2009. What to do?
The latest firmware offered (ver. 26) crashes the camera, so that is not the solution. I can off course remove the security warnings on the browsers, but that is not the right way to fix the problem.
Anyone with a solution out there?

Open internet explorer go to Tools -Internet options under security -Click on Custom Level - Enable all active X plugins.

Syncs Calander and Contact but not Mail. Password Incorrect

I setup my exchange on the phone and it works fine for syncing contacts and calander events. However, it does not sync mail. If I go into the mail application and click on the exchange account, it takes about 30 seconds and then says my password is not correct. It also tells me my password is not correct every time I turn the phone off and back on.
Also, my outlook locks me out every once in a while. There is some kind of password problem going on here, please help.

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

Anywhere Access - CERTIFICATE NOT VALID OR PASSWORD INCORRECT

Similar Messages

Maybe you are looking for