AOL email connectivity issue - Sends but does not receive

I have 2 AOL email accounts on my Droid X. Up until Thursday, I had no issue receiving emails to both addresses. Suddenly on the Thursday my default account kept indicating connectivity issues with the account. The other AOL account worked perfectly.
I can still send from default AOL account and they are received, but I am not able to receive any email into this account. I tried to forwarding these email addresses to my gmail account. But gmail is not receiving emails from either account.
Any suggestions?

SHAC wrote:
This is amazing!
i didn't know people still used AOL mail LOL
Time Warner took over AOL and allowed customers to retain their AOL accounts to minimie the headache of converting everyone...
Now to the ones having issues, have you tried contacting AOL and make sure they are not transferring or updating a server, because usually when they do this it can effect some accounts but not other just as you have discribed. They may require a new port entered or even pop, imap or smtp access information. Drop them a call and verify incoming and outgoing addresses.

Similar Messages

Mac Mail sends but does not receive

Hi
Big problem!
Just upgraded to Lion - and this problem was on Snow Leopard too - I tried to upgrade to sort this out!
Mail sends emails but does not recieve.
I own the server where it is trying to connect to - the emails are there - I can see them through webmail.
I have set up different email accounts on Mail and exactly the same for all domains and email accounts.
I have re-installed Mail - exactly the same happens.
I have used Thunderbird and it works!
So it has to be a Mail problem. Server is fine, OS is fine, other email is fine. Mail is the problem.
I think it has to do with keychain? Not sure though... I have tried literally hundreds of things but nothing works and I am at my wits end and run out of ideas!
Any suggestions would be warmly received!!
Thanks in advance
Rob

Hi,
I have the same problem with my incoming mail. I talked to the folks at Frontier (my ISP). They verified that a
test message I had sent was received. All account info appeared to be ok. I click on "get mail" and I do not
receive any new incoming messages. All connections succeed Using Connection Doctor, although the connection to smtp.frontiernet.net spins quite awhile before succeeding.
While I was composing this reply, I decided to try to send a test message to my wife's account. It came
through ok. I think I might have to contact Frontier again on this. When I set her account up they gave me a
different Incoming Mail Server name to use: pop3.frontier.com, whereas mine is: pop3.frontiernet.net. I believe
new accounts are being assigned to: pop3.frontier.com.
Also, when I'm showing all inboxes, Mine all have a symbol after them that looks like a lazy z. I am not familiar
with this symbol, but since I'm having trouble, I suspect it is telling me something. Help on this??

Outlook 2007 sends but does not receive on ipad

My Outlook works fine both receiving and sending emails on my Windows 8.1 laptop. However, on my pad mini outlook can send but cannot receive emails.
I would be grateful for a solution to this.

I found my problem.
“Add-ons” were the source of the problem.
I believe there was a conflict between two programs:
Norton’s Security Suite and AnVir Security Suite.
Both were trying to scan my incoming e-mail.
I uninstalled AnVir, reset Outlook back to its original configuration (i.e. reversed all the changes I described above), and my problem is gone.
Not sure why this problem took so long to appear as both programs had been install for at least a month without issues.
I used AnVir and ZoneAlarm for over a year together without issues.
However, about one month ago, I uninstalled ZoneAlarm and installed Norton’s Security Suite.
In any event, uninstalling AnVir solved the problem.
Uninstalling Norton’s and keeping AnVir would probably work as well.

Mail sends but does not receive

Since 10.6.2 I've twice had incidents of my SBC account going gray and not receiving mail. Problem exists on iMac, MacBook, and iPhone so it is not a machine problem unless all three have had settings corrupted via mobileMe. Mail present on ISP server. Send works. First incident cleared spontaneously but current incident persists. Preferences settings appear to be correct on all three devices. Authentication is by password. Port is 995. Ideas?

These sporadic losses of connections to the server are not new with Snow Leopard. I've had them more frequently in the past and the only way I've been able to deal with them is to tell Mail to check/reconnect again.

Photosmart 7520 e-ALL-IN-ONE appears to send email from scan successfully but does not

The scanner scans and appears to send the email successfully, actually confirms the email has been sent but does not arrive
This question was solved.
View Solution.

Hi Anne,
Thank you for the update. It’s great that we solved one issue, now onto the next ...
Please Try the HP Print and Scan Doctor for Windows. The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems. It should resolve the problem, or at least point you in the right direction to solve the issue of the missing text. If it doesn’t, please try following the steps in Troubleshooting Print Quality Issues.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

When sending email to pc users, recipient does not receive text in email?

Hi
when sending email using MAIL to pc users from 27" IMAC, recipient receives the email and attachments, but does not receive my note/text in email?
any ideas?

If they are using Outlook, that is likely the problem.
There are two settings in the Edit>Attachments, Always send windows-friendly and attachments at end of message.
Also, set the message as Plain Text (Format menu).
Outlook has always been crappy with anything but Exchange email. They haven't fixed it in about ten years, so I wouldn't expect any changes in the future.

Firefox has detected the server is redirecting the request for this address in a way that will never complete. This is happening in my email program with comcast but does not happen with IE e

Question
firefox has detected the server is redirecting the request for this address in a way that will never complete. This is happening in my email program with comcast but does not happen with IE e edit

Thanks to cor-el for the suggestion given in the link. Sadly I have to report:
1) It is not a bookmark problem and it makes no difference whether I put
www.adobe.com or 192.150.18.117 in the address bar.
2) Cookies are allowed and there are no exceptions set
3) All cookies have been deleted
4) network.http.sendRefererHeader is already set to 2
That deals with the items in the linked document.
Additional information:
5) I can get into the adobe site from a clean "in memory" installation of PuppyLinux using Seamonkey using the same router and dhcp setup.
6) un-installing all Mozilla products - rebooting and re-installing makes no difference even when I remove the mozilla folder from docs&settings.
so as I said in previous post (as annonymous) not a lot makes sense.
Bear in mind that I have no problem running tracert in a command window
Tracing route to www.adobe.com [192.150.18.117] over a maximum of 30 hops:
1 11 ms 10 ms 9 ms 10.0.0.1
2 13 ms 12 ms 11 ms glo-2-dsl.as9105.net [212.74.111.191]
3 13 ms 12 ms 11 ms ge1-2-27.glo0.as9105.net [212.74.106.106]
4 14 ms 12 ms 13 ms pos0-0.bri1.as9105.net [212.74.108.162]
5 17 ms 16 ms 17 ms ge0-0-0.he-lon0.as9105.net [212.74.109.14]
6 17 ms 17 ms 16 ms 10.72.11.75
7 16 ms 17 ms 17 ms xe-0-3-0-10.lon20.ip4.tinet.net [213.200.77.177]
8 91 ms 92 ms 99 ms xe-5-1-0.was12.ip4.tinet.net [89.149.184.34]
9 92 ms 92 ms 93 ms xe-0.equinix.asbnva01.us.bb.gin.ntt.net [206.223.115.12]
10 162 ms 170 ms 162 ms as-3.r20.snjsca04.us.bb.gin.ntt.net [129.250.2.167]
11 166 ms 166 ms 165 ms ae-1.r07.snjsca04.us.bb.gin.ntt.net [129.250.5.53]
12 162 ms 163 ms 161 ms xe-0-2-0-3.r07.snjsca04.us.ce.gin.ntt.net [128.241.219.86]
13 166 ms 163 ms 161 ms 192.150.18.11
14 166 ms 166 ms 165 ms www.adobe.com [192.150.18.117]
Trace complete.
and I can ping the site.
so where now ?

My i phone 4 will send messages but does not receive them - why?

My i phone 4 will send messages but does not receive them - why is this?
e mail works both ways

Did you already check the general troubleshooting for messages here?
http://support.apple.com/kb/TS2755

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Hey anyone know of a way to set up gmail on the iPad or iPhone that it only sends mail but does not receive

Hey please let me know if you know about this

Shlomo-
My Usenet Newsreader program (MT-Newswatcher) has a mail client capable of sending messages through my mail account, but is not capable of receiving mail as far as I can tell. However my mail account does receive mail. If there is an mail account not capable of receiving mail, I don't think Gmail is it. But that doesn't mean you have to read it or download it to your computer.
My incoming mail resides on an AOL server. My old AOL mail client only shows basic information like title, date received and who it is from. The mail is not actually downloaded to my computer until I open it.
Other mail clients such as AOL Desktop and the iPad mail App, do download the mail to your computer or iPad, whether you read it or not. So the answer to your question may depend on your mail client and how you define "does not receive"!
Fred

Aol email is constantly loading but im not recieving emails could anyone help thanks paul

hi my aol in box, has a constant loading symbol rotating next to it, but im not recieving any emails. could anyone help .thanks paul

Hello:
AOL (like other Mail providers) occasionally has server problems (I use AOL mail and it happens to me once in awhile).
However, if it does not clear up after a bit, open Mail. Click on Window>connection doctor. There should be indications of what is wrong.
Barry

Form sends but does not appear to send

Hello
I have a small problem with the online form I have. When the
site visitor sends the form (by clicking submit) the form is
received by the Webmaster, but it does not
appear to have been sent to the site visitor. That is, all
the details, name, email, etc remain in place in the online form
after the submit button has been clicked.
I am posting this here because I think the form processing
aspect of my query works fine, so I assumed this was a Flash
problem. I am using Flash MX 2004.
This the relevant part of my AS:
var serverLang:String = "asp";
var email_lv:LoadVars = new LoadVars();
email_lv.onLoad = function(success) {
if (success) {
if (email_lv.server_mes == "ok") {
status_txt.text = "Thank you, " + name_txt.text;
} else {
status_txt.text = "Sorry, your message was not sent";
submit_btn.onRelease = function() {
email_lv.sendAndLoad("fla.asp", email_lv, "POST");
Thanks.
Steve

At the moment your code is only set up to display a message
and not to blank out any input fields etc.
I presume some onChanged handlers for the input fields change
the values in email_lv or perhaps some enterFrame loop etc.
You would normally do things either in the submit_btn handler
or email_lv.onLoad handler to hide or remove the input fields.
So you would need code to do that part.
If you mean something else, for example that the
if (success) { (etc)
part of your code is not executing after the form has been
successfully processed on the server (And the message "Sorry your
message was not sent" is being shown instead)
In that case, perhaps your server script is not returning the
expected value. All you need do in that case is have the asp script
return "server_mes=ok" in the body of the response. That will give
the LoadVars a return value to work with instead of nothing and
then the (success) branch of your code should execute .

I think I need to re install Encore off my discs. When I ask Premier Pro CS5 to send my project to Encore, Encore opens but does not receive my movie sequence. How do I re install Encore only without upsetting my movie?

Hello. I have the Premier Pro CS5 suite on Windows. Can you advise me how to re install Encore off my discs without affecting any of my movie in Premier Pro please?
I ask Pro to send the movie sequence through Dynamic Link into Encore so that I can burn the sequence to a disc.
Encore does open but the sequence does not arrive from Pro.
Last night the sequence did arrive into Encore but took forever to transcribe and I eventually cancelled the process as it appeared to get stuck and did not quite get to writing to disc.
This morning the sequence does not even arrive into Encore.
Very frustrating when I have a 4hr movie that I want to write to Bluray so I have now created 4 separate sequences and want to try writing them onto DVD in 1hr chapters.
Hope someone can help me with this. Cheers. Janice

Hello Ann. Thank you for your help. I have re installed EN and I have now
sent parts of my movie to AME. I have then tried several different methods
of getting the encoded clips into Encore successfully. Once in the Project
panel and the Timeline, the movie does not show up in the Monitor panel
above, so I have proceeded to build and write to a disc. I've tried a
number of options but always end up with EN 'not responding' and having to
close the program down.
Something else is that I do get a message whilst in Premiere Pro that there
is an update available for AME, however, when I look online I do not see an
update for CS5, although there are 2 updates for CS6. Can you suggest what
I could do please? The Encore problem is the one that concerns me the most
as I am not able to record my movie.
Looking forward to your reply.
Kind regards.
Janice

New Mac Mini sends airplay audio but does not receive it

I just purchased and set up two new Mac Minis with Mountain Lion. Previous to this, using Lion and even Leopard, I could send Airplay audio to any of my desktop machines. Further, my iOS devices could send audio to my Macs running Snow Leopard and Lion. The new machines do not receive airplay audio from anything. They can send to the other devices, but not to themselves. Had I upgraded all of desktop machines to 10.8, I wouldn't be able to send audio anywhere.
Why is this?

From what I'm reading, airplay is only for streaming to your tv. I have apple tv and have never been able to stream from one device to another; only from device to tv.
Can you link to an apple document saying it's supposed to work computer to computer? Are you sure you weren't using home sharing in itunes?

Moto X not sending or receiving mms via native messenger app, occasionally sends them, but does not receive them via hangouts.

I've had my moto x for roughly 3 weeks. It worked perfectly fine until yesterday morning, when it stopped sending mms via the native messenger app. Frustrated, I restarted my phone, only to discover that now the entire native messenger app not longer functioned. I switched to hangouts which will send sms messages, but only occasionally sends mms and will not receive them. I'm not sure what is going on. Any insight would be greatly appreciated.

Please make sure you have installed the update to 3.0, which recently came out... MANY bug mixes.

AOL email connectivity issue - Sends but does not receive

Similar Messages

Maybe you are looking for