AOL Install Fix using CHUD Tools

Hello,
For those of you who were asking about how to fix the AOL install problem on Intel Macs, here is a tip I found at macosxhints.com:
AOL seems to have a problem installing on multi-core Intel Macs. The installation hangs at "Installing Main Database." I found a successful workaround for this problem. Go to Apple's developer website and download the CHUD Tools. Once installed, there will be a Processor preference pane in System Preferences. Use this to turn off all but one Intel processor, then run the AOL installer. Once the installer finishes, turn the processors back on. Disabling CPUs solved install issues with other apps.
JLM

Holy cow, what a piece of junk installer. SERIOUSLY?!?! The AOL engineers never in their lives tested their application on a multi-CPU machine?
Seriously. How would anyone trust something so junky to their machine.

Similar Messages

  • Download CHUD Tools then massive power failure

    HELP, PLEASE!!!
    I've had my MACs for about 6 years now and never had any real problems. Recently however I noticed the G4 starting running quite hot and loud so I decided to use CHUD tools to cool it down a bit. I downloaded the app and ran the 'previous CHUD versions' checker as instructed. As soon as I clicked on it the machine shut down and I've been unable to restart since. (I don't think it actualy launched and I didn't get as far as installing the actual tools app)
    The power light has a solid white light on when depressed, but goes no further. I've investigated the cause quite thoroughly and read all the forums about the G4 PSU failure,PRAM reset,battery changing,CPU reseting etc. I've done all of those and have the +5v trivkle on pin 1 of 24 of the PSU.
    I've also tried a different hard drive in the machine - trying to ascertain whether it is the CHUD tools causing the problem (software/hardware problem?)and it still won't power up. Therefore I think that it's just a crazy coincidence that I launched CHUD and then had this failure as the 'non-CHUD infected' drive should have enabled the machine to launch I think.
    So I'm wondering, I think it has to be either the PSU or power switch itself. I have the 5v trickle as mentioned, but are there further tests I can do on a 24 pin supply to confirm its status please?
    If not, Is there a way of testing the power switch on the front of the machine please?
    THANKS VERY MUCH IN ADVANCE FOR ANY HELP!
    regards
    Dan

    Even if by 'PRAM reset' you mean use of the PMU switch, you may not have hit upon the single most useful first approach to an MDD that fails to start up: resetting the MLB.
    Switch off mains power at the wall or power-board. Open the door and ground yourself on the internal metalwork, Remove the PRAM battery. Unplug the mains cable at the Mac end. (This is Apple's recommendation, but I don't follow it because Australian GPOs—power outlets—are universally grounded three-pin sockets. If your GPO tests as reliably grounded, as well as switched, you don't need to do so, either.)
    Wait at least 10min. Replug the mains cable into the Mac (if you separated it above), but do not yet switch on mains power. Ground yourself again. Restore the PRAM battery only if it shows above 3.3V in circuit. Otherwise, replace it with a new battery. Wait 20sec. Press the PMU reset switch for 1sec once, and once only. If the switch bounces it will be interpreted by the PMU as two presses, with an entirely wrong outcome. The PMU is extremely sensitive to stray charge, so make sure that the hand that presses the button is also in contact with the metalwork of the door.
    Close the door, switch on the mains supply and start up the Mac from the touch-sensitive 'button' on the ADC display. Given nothing worse than the Mac's former confusion as the cause of its failure, you should be up and away. If not, failure of your PSU is a distinct possibility.

  • CHUD tools for current-gen 13" and Lion

    Hello,
    I have a current-gen 13" and I'm looking to disable hyperthreading and possibly one core and underclock using CHUD tools and hwprefs:
    sudo hwprefs -v cpu_count=1
    sudo hwprefs -v cpu_ht=0
    When I tried installing the CHUD tools the installer went all the way through and then told me it failed, however hwprefs is available in Terminal. Running those commands shows me this:
    * 2 processors available *
    * processor hyperthreading enabled *
    I'm glad it's smart and knows that stuff but that's not what I wanted. Does anyone have experience with this?

    I just sucessfully installed the CHUD tools on 10.7.2, and am now using CPUPalette.app, located in /Library/Application Support/HWPrefs. What version of Lion did you try to install CHUD on?
    Alternatively, you can go into the Preferences for Instruments.app, which is installed with Lion's XCode from the App Store, and turn off processor cores.

  • I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
    Download Photoshop Elements products | 12, 11, 10

  • CHUD tools failed to install (want to disable HT)

    hey all.
    I have a 13" macbook air (2011 late version)  i love it but would like to turn off HT. i have Hyper-threading off on my gaming PC and i love how much less power it uses as well as less heat output. 
    well when i installed the CHUD tools it fails at the end. but im still able to install the processor system pref icon. when i open up the settings the settings are missing. like clock speeds are not being shown and if i chose to unchech hyper threading and or maybe a core the settings dont stick???
    is this a known issue with macbook airs or OSX 10.7.2??
    i really really would like to disable Hyper threading.  please help me out.  thanks

    i have a late 2011 2.4ghz 15" mbp and am also interested inturning off HT. all the other forums i look at say There is a command you can use to turn of hyperthreading it is "sudo nvram smt=0" once you type it in it will ask you for your password. Try it and see if it changes anything becuase i have set the smt to 0 and nothing has changed for me but it may change something for you. what are you using to see how many active cores there are? istat menus?

  • I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

    I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

    What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
    In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

  • HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

    So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error. 

    A wag at this.  A port issue?
    "Apple Push Notification network setup
    When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
    be open."
    http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
    google: ports ios configure ipad
    Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
    Robert

  • HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

    I used Inkscape on Linux before moved to Mac. Now I am trying to install it
    using MacPorts, but libpixman has some problems that has been reported out there.
    Does any one know how to fix it without the need to use other way than MacPorts?

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Using Text Tool Freezes Photoshop CC 2014.2 x64 release

    I have just updated Photoshop CC to 2014.2.0 -- 20140926.r.236 x64 release. Now I am experiencing an issue when I use the text tool to just type a few words on a new document or layer. The application seems to freeze up as soon as I start typing? I wait several minutes with nothing happening and have to resort to using the Windows task manger to kill the photoshop processes. This did not happen before I updated to this release?? Please advise how to fix this if possible to [email protected].
    I'm using Windows 7 x64
    Here's the system info reported from Photoshop:
    Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
    Physical processor count: 2
    Processor speed: 3000 MHz
    Built-in memory: 8189 MB
    Free memory: 1413 MB
    Memory available to Photoshop: 7161 MB
    Memory used by Photoshop: 80 %
    3D Multitone Printing: Disabled.
    Windows 2x UI: Disabled.
    Highbeam: Enabled.
    Image tile size: 128K
    Image cache levels: 2
    Font Preview: Medium
    TextComposer: Latin
    Display: 1
    Display Bounds: top=0, left=0, bottom=1024, right=1280
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    AIFCoreInitialized=1
    AIFOGLInitialized=1
    OGLContextCreated=1
    NumGLGPUs=1
    glgpu[0].GLVersion="3.0"
    glgpu[0].GLMemoryMB=1024
    glgpu[0].GLName="ATI Radeon HD 4800 Series "
    glgpu[0].GLVendor="ATI Technologies Inc."
    glgpu[0].GLVendorID=4098
    glgpu[0].GLDriverVersion="8.850.0.0"
    glgpu[0].GLRectTextureSize=8192
    glgpu[0].GLRenderer="ATI Radeon HD 4800 Series "
    glgpu[0].GLRendererID=37952
    glgpu[0].HasGLNPOTSupport=1
    glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
    glgpu[0].GLDriverDate="20110419000000.000000-000"
    glgpu[0].CanCompileProgramGLSL=1
    glgpu[0].GLFrameBufferOK=1
    glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="3.30"
    glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
    glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[32]
    glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
    glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
    glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
    glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
    glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
    License Type: Subscription
    Serial number: 96040090050480634073
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
    Temporary file path: C:\Users\Home\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
    F:\, 2.73T, 1.89T free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
    Installed components:
    A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
    ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
    adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
    AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
    AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
    AdobeOwl.dll Adobe Owl 5.2.4
    AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
    AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
    AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
    AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
    AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
    adobe_caps.dll Adobe CAPS 8,0,0,13
    AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
    ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
    amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
    ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
    AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
    AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
    Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
    BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
    boost_date_time.dll photoshopdva 8.0.0
    boost_signals.dll photoshopdva 8.0.0
    boost_system.dll photoshopdva 8.0.0
    boost_threads.dll photoshopdva 8.0.0
    cg.dll NVIDIA Cg Runtime 3.0.00007
    cgGL.dll NVIDIA Cg Runtime 3.0.00007
    CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
    CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
    CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
    dvaaudiodevice.dll photoshopdva 8.0.0
    dvacore.dll photoshopdva 8.0.0
    dvamarshal.dll photoshopdva 8.0.0
    dvamediatypes.dll photoshopdva 8.0.0
    dvametadata.dll photoshopdva 8.0.0
    dvametadataapi.dll photoshopdva 8.0.0
    dvametadataui.dll photoshopdva 8.0.0
    dvaplayer.dll photoshopdva 8.0.0
    dvatransport.dll photoshopdva 8.0.0
    dvaui.dll photoshopdva 8.0.0
    dvaunittesting.dll photoshopdva 8.0.0
    dynamiclink.dll photoshopdva 8.0.0
    ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
    icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
    icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
    igestep30.dll IGES Reader 9.3.0.113
    imslib.dll IMSLib DLL 7.0.0.154
    JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
    libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
    libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
    libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
    LogSession.dll LogSession 7.2.1.3399
    mediacoreif.dll photoshopdva 8.0.0
    MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
    pdfsettings.dll Adobe PDFSettings 1.04
    Photoshop.dll Adobe Photoshop CC 2014 15.2
    Plugin.dll Adobe Photoshop CC 2014 15.2
    PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
    PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
    PSArt.dll Adobe Photoshop CC 2014 15.2
    PSViews.dll Adobe Photoshop CC 2014 15.2
    SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
    ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
    svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
    tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
    tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
    TfFontMgr.dll FontMgr 9.3.0.113
    TfKernel.dll Kernel 9.3.0.113
    TFKGEOM.dll Kernel Geom 9.3.0.113
    TFUGEOM.dll Adobe, UGeom© 9.3.0.113
    updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
    VulcanControl.dll Vulcan Application Control Library 5.0.0.82
    VulcanMessage5.dll Vulcan Message Library 5.0.0.82
    WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
    wu3d.dll U3D Writer 9.3.0.113
    Required plug-ins:
    3D Studio 15.2 (2014.2.0 x001)
    Accented Edges 15.2
    Adaptive Wide Angle 15.2
    Angled Strokes 15.2
    Average 15.2 (2014.2.0 x001)
    Bas Relief 15.2
    BMP 15.2
    Camera Raw 8.6
    Camera Raw Filter 8.6
    Chalk & Charcoal 15.2
    Charcoal 15.2
    Chrome 15.2
    Cineon 15.2 (2014.2.0 x001)
    Clouds 15.2 (2014.2.0 x001)
    Collada 15.2 (2014.2.0 x001)
    Color Halftone 15.2
    Colored Pencil 15.2
    CompuServe GIF 15.2
    Conté Crayon 15.2
    Craquelure 15.2
    Crop and Straighten Photos 15.2 (2014.2.0 x001)
    Crop and Straighten Photos Filter 15.2
    Crosshatch 15.2
    Crystallize 15.2
    Cutout 15.2
    Dark Strokes 15.2
    De-Interlace 15.2
    Dicom 15.2
    Difference Clouds 15.2 (2014.2.0 x001)
    Diffuse Glow 15.2
    Displace 15.2
    Dry Brush 15.2
    Eazel Acquire 15.2 (2014.2.0 x001)
    Embed Watermark 4.0
    Entropy 15.2 (2014.2.0 x001)
    Export Color Lookup Tables NO VERSION
    Extrude 15.2
    FastCore Routines 15.2 (2014.2.0 x001)
    Fibers 15.2
    Film Grain 15.2
    Filter Gallery 15.2
    Flash 3D 15.2 (2014.2.0 x001)
    Fresco 15.2
    Glass 15.2
    Glowing Edges 15.2
    Google Earth 4 15.2 (2014.2.0 x001)
    Grain 15.2
    Graphic Pen 15.2
    Halftone Pattern 15.2
    HDRMergeUI 15.2
    HSB/HSL 15.2
    IFF Format 15.2
    IGES 15.2 (2014.2.0 x001)
    Ink Outlines 15.2
    JPEG 2000 15.2
    Kurtosis 15.2 (2014.2.0 x001)
    Lens Blur 15.2
    Lens Correction 15.2
    Lens Flare 15.2
    Liquify 15.2
    Matlab Operation 15.2 (2014.2.0 x001)
    Maximum 15.2 (2014.2.0 x001)
    Mean 15.2 (2014.2.0 x001)
    Measurement Core 15.2 (2014.2.0 x001)
    Median 15.2 (2014.2.0 x001)
    Mezzotint 15.2
    Minimum 15.2 (2014.2.0 x001)
    MMXCore Routines 15.2 (2014.2.0 x001)
    Mosaic Tiles 15.2
    Multiprocessor Support 15.2 (2014.2.0 x001)
    Neon Glow 15.2
    Note Paper 15.2
    NTSC Colors 15.2 (2014.2.0 x001)
    Ocean Ripple 15.2
    OpenEXR 15.2
    Paint Daubs 15.2
    Palette Knife 15.2
    Patchwork 15.2
    Paths to Illustrator 15.2
    PCX 15.2 (2014.2.0 x001)
    Photocopy 15.2
    Photoshop 3D Engine 15.2 (2014.2.0 x001)
    Photoshop Touch 14.0
    Picture Package Filter 15.2 (2014.2.0 x001)
    Pinch 15.2
    Pixar 15.2 (2014.2.0 x001)
    Plaster 15.2
    Plastic Wrap 15.2
    PLY 15.2 (2014.2.0 x001)
    PNG 15.2
    Pointillize 15.2
    Polar Coordinates 15.2
    Portable Bit Map 15.2 (2014.2.0 x001)
    Poster Edges 15.2
    PRC 15.2 (2014.2.0 x001)
    Radial Blur 15.2
    Radiance 15.2 (2014.2.0 x001)
    Range 15.2 (2014.2.0 x001)
    Read Watermark 4.0
    Render Color Lookup Grid NO VERSION
    Reticulation 15.2
    Ripple 15.2
    Rough Pastels 15.2
    Save for Web 15.2
    ScriptingSupport 15.2
    Shake Reduction 15.2
    Shear 15.2
    Skewness 15.2 (2014.2.0 x001)
    Smart Blur 15.2
    Smudge Stick 15.2
    Solarize 15.2 (2014.2.0 x001)
    Spatter 15.2
    Spherize 15.2
    Sponge 15.2
    Sprayed Strokes 15.2
    Stained Glass 15.2
    Stamp 15.2
    Standard Deviation 15.2 (2014.2.0 x001)
    STL 15.2 (2014.2.0 x001)
    Sumi-e 15.2
    Summation 15.2 (2014.2.0 x001)
    Targa 15.2
    Texturizer 15.2
    Tiles 15.2
    Torn Edges 15.2
    Twirl 15.2
    U3D 15.2 (2014.2.0 x001)
    Underpainting 15.2
    Vanishing Point 15.2
    Variance 15.2 (2014.2.0 x001)
    Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
    Water Paper 15.2
    Watercolor 15.2
    Wave 15.2
    Wavefront|OBJ 15.2 (2014.2.0 x001)
    WIA Support 15.2 (2014.2.0 x001)
    Wind 15.2
    Wireless Bitmap 15.2 (2014.2.0 x001)
    ZigZag 15.2
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash: NONE
    Installed TWAIN devices: NONE
    http://feedback.photoshop.com/photoshop_family/topics/using-text-tool-freezes-photoshop-cc -2014-2-0-20140926-r-236-x64-release/replies/14873829 

    Check out this other thread I started
    http://feedback.photoshop.com/photoshop_family/topics/using-text-tool-freezes-photoshop-cc -2014-2-0-20140926-r-236-x64-release?utm_source=notification&utm_medium=email&utm_campaign =new_reply&utm_content=reply_button&reply[id]=14914157#reply_14914157
    There it's help there.  I've not totally solved my problem but others seemed to have.
    Richard

  • TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

    I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • To use this tool you must first connect to server.

    Hi all:
    I am new to Oracle. After installing Oracle 10g I tried to run it but I had Directory Server Connection window popup. It said "To use this tool you must first connect to server. Click on the OK button to select a server". I did not see any server I could choose. And also during installation I had warning or error message but I chose to continue installing.
    Please help me to get this fix....
    Thank you
    KT

    Hello User:
    I am having the same problem. Where it says test your installation; step No. 1
    Open the browser and enter http://<hostname>:1158/em
    Am I to this this textually? Exactly as it appeasrs?
    Please advise,

  • Computer idling sound | CHUD tools...

    Hi there,
    Since a few weeks (I guess since I installed OS X.4), I've noticed that my computer makes a subtle sound (kind of metallic) every single second. It's driving me crazy.
    In the this page: http://docs.info.apple.com/article.html?artnum=86523 I discovered that my computer makes the the computer idling sound (the first one on the page).
    I downloaded the CHUD tools, but I have no idea how they works... I don't understand anything! (Apparently, it will install a System Preference pane for the processor. With it, you can disable CPU nap, which lessens the noise for some.)
    And turning the speakers up a bit won't help me because I work without music... I need quiet to concentrate.
    Thanks!
    Chris.

    Krissserz --
    There are various opinions on whether it will damage your machine over a period of time. It does indeed increase the temp' though (I have tested it on my 2.3 dual machine). My opinion is that you should monitor the G5 while using it with NAP off. In my case, it only varied by 10 degrees, which is not a lot.
    Just do a search on the word "NAP" and you will see many emails on this subject. It was a hot (no pun intended) topic on this forum at one time.
    Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.8)   1.5 GB DDR SDRAM Apple 20 inch. Display

  • Chud Tools 'Allow Nap' Problems

    Hi all, before i go down the road of trying to get my powerbook looked at by an agent can anybody tell if they have had the same problems and managed to get them resolved via an apple specialist or will i just be fobbed off.
    Here's the problem. I launch Pro Tools and the powerbook makes a real loud static fuzz sound. I untick the 'allow nap' feature in the processor pane of chud tools and the sound stops. Also when i'm using intense apps like FCP and Motion i get a grinding hamster wheel sound. Once again i untick 'allow nap' and the problem go's away. I think downloading a developer tool and messing with the processor isnt really much cop for a £1300 laptop. Can anybody shed any light and more importantly has anybody managed to resolve this problem.
    Regards
    Mike
    PS: The sounds emit from around the top left of the powerbook and they are not coming out of the speakers.

    As for the sound issues have a look as there is some idea about a fix comming in 10.4.5
    http://www.appleinsider.com/article.php?id=1519
    Likely you might have more luck with the UNIX forums under support/osx technology's /unix as maybe there might be inteligent life but not when I needed it.
    PS: the NAP option is not permanetly disabled and if you managed to get it permanently disabled the you should be well on you way.
    I just erased / reinstalled and avoided any unneaded files/programs and mine is running like a charm.
    I even stress test it with UT2004 at max playable options for 5 hours spectating online and getting some good maps in the same time and it still runs like a charm.
    There where just a few creaking movement noises as the part adjusted to the heat but it runs cool @ avg 60C.
    Hope this helps.
    Have you seacrhed for "disable nap" on google or macupdate.com etc. etc.
    There might be a permanent fix there.

  • Using JCOP tools under Linux

    Hello.
    I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
    I am interested in following questions:
    1. Is there any separate distributon version of JCOP tools for Linux?
    2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
    3. Is JCOP simulation option available under Linux?
    I'll appreciate any help.
    Best regards,
    newbie

    newbie2007 wrote:Hello.
    I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
    I am interested in following questions:
    1. Is there any separate distributon version of JCOP tools for Linux?
    2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
    3. Is JCOP simulation option available under Linux?
    I'll appreciate any help.
    Best regards,
    newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
    2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
    3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
    h1. Release Notes
    h2. Version
    JCOP Tools 3.1.1.b (B&auml;rlach)
    h2. What's new?
    h3. 3.1.1.b
    <ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
    <li>Applet privileges can now be specified in the launch configuration dialog.</li>
    <li>The "exportmap" feature is now available.</li>
    <li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
    <li>Minor bug fixes.</li>
    </ul>
    h2. Known problems
    <ul><li>Simulations do not run (Linux, MacOS X)
         The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
    </li>
    <li>PC/SC Support (Linux)
         JCOP Tools only works with pcsc-lite 1.2.0.
    </li>
    </ul>
    h2. Frequently Asked Questions
    Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
    h2. Bug Reports
    Please send bug reports to [email protected]. Make sure you include the following:
    <ul><li>Problem description</li>
    <li>Steps to reproduce</li>
    <li>Eclipse version and build number (Help > About)</li>
    <li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
    </ul>
    h2. Using JCOP Tools with Linux (>= 3.2.0)
    h3. ___
    Overview
    The current JCOP Tools release now also offer a version for the popular Linux
    operating system. Both the Windows and Linux verson provide more or less the same
    functionality, and JCOP application development can thus fully succeed on Linux systems.
    Nevertheless, installation of the JCOP Tools differ between Windows and Linux
    where the Linux version does not provide a simple installer as in case of Windows.
    Additionally, the Linux version expects a properly setup Muscle PCSC installation
    as soon as you want to use them together with physical, real cards. As Muscle
    PCSC is still not shipped with most Linux distributions, you must download and
    install them separately from the JCOP Tools.
    h3. ___     
    Contents
    h3. ___
    Software Requirements
    Linux distribution
    The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
    many other recent Linux distributions.
    Java Development Kit
    The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
    for Linux. Your success with other Development Kits may vary as there are
    partly subtle differences across the different devlopment kits.
    PCSC
    The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
    do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
    and install it by yourself. If you are used to software installation under Linux,
    and are not afraid of compiling and installing software packages, this should
    not be a hard problem. You have to download both the base PCSC package
    (including PCSC daemon and client libraries) and separately the driver
    for the reader you want to use. The PCSC package contains a test program
    which should tell you whether your installation is set up correctly and
    communicating with a card works. The JCOP Tools have been reported to
    work together with Muscle PCSC version 1.3.1-7.
    JPCSC
    The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
    is a JNI library which offers Java applications the access to PC/SC functions
    by mapping their requests to an underlying native PC/SC implementation. The JCOP
    Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
    on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
    Especially, the JAVA_LIBRARY_PATH should list the directories where the
    PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
    Windows Binary Download Here )
    are installed, the CLASSPATH variable should list th___
    Miscellaneous
    What should work
    As soon as you setup your system correctly, there should only be minor differences
    between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
    debugging, shell, cap-file conersion should all be possible as in case of Windows.
    What is missing
    No drivers or tools are currently available for using JCOP30's in contactless
    mode. If you need such support, please contact directly NXP
    at for further assistance.
    Copyright 2001,2007 IBM Corp. All rights reserved.
    Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

  • Can't use some tools in Ps cs6 trial

    I downloaded the Photoshop cs6 trial yesterday, and it worked fine. Today, however, I can't choose colors or draw shapes. I keep getting the message "Could not use [insert tool name] because of program error." What can I do to fix this? Am I allowed to uninstall, re-download, and re-install the trial version if I have already done so (today is only day 2 since I downloaded it)?

    Welcome to the forum.
    With the trail, I would NOT uninstall it.
    As for the issues with some Tools, can you please tell us first, exactly what you are working with? A screen-cap of your GUI, with the Open Image (or New Image) showing, plus the Layers Panel open, would be very useful. Also, including the Options Panel for one of the problem Tools, might give clues.
    Next, let us know exactly what you wish to do, and how you are going about it. The more detail, the better.
    It is probably something simple, and something that is easily handled. If not, then you might also gather the details of your computer, as that info might be useful in the next step.
    Good luck,
    Hunt

Maybe you are looking for