Aol plays a series of video that played acouple days ago when ever I open a video

an instrumental on a plane and the president discussing the leak-plays when ever i open a video on. they will play then the current and sometimes together. vlc plug in and silverlight. Disabled one then the other. No change. Both and still played. On Beta so info available.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Similar Messages

  • How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    Try running Pandora in its own tab and leaving that tab open (Safari 7.1.5, OS 10.9.5).  I don't have Pandora to try this, but it works for me otherwise.
    Good luck
    srb

  • I want to change my region and everytime it says my itunes match subscription is active. I disabled the auto renewal without any success!! I even called apple support that promised me to call within 2 I want to change my, that was 10 days ago!! Any help??

    I want to change my region and everytime it says my itunes match subscription is active. I disabled the auto renewal without any success!! I even called apple support that promised me to call within 2 hours, that was 10 days ago!! Any help??

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • I purchased an annual subscription to Acrobat Pro XI and installed two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that

    I purchased an annual subscription to Acrobat Pro XI and installed on my Mac two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that won't open. SOS!

    Hi Margot ,
    You can click on accept or buy ,which ever option you see on that dialog box.It will prompt you to type in your Adobe Credentials.You can license it by doing the same.
    If it still doesn't work ,follow these steps and see how it goes .
    Delete all the files from following folders:
    [Home]/Library/Application Support/Adobe/SLStore
    [Home]/Library/Application Support/Adobe/SLCache
    And, delete all files from following folder except cache.db
    [Home]/Library/Application Support/Adobe/AdobePCD
    Then launch Acrobat and try to activate and check.
    Regards
    Sukrit Dhingra

  • Is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that

    is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that

    iPhone 3G has received its last iOS update. If wallpapers behind the homescreen icons is such an important feature for you, you'll need a newer model iPhone.

  • Display a Date that is 30 days ago from today

    Hi All, I want to display a Date that is 30 days ago from today, and I used Calendar object here is my code,
    Calendar to = Calendar.getInstance();
        String toYYYY = ""+to.get(Calendar.YEAR);
        String toMM = "" + (to.get(Calendar.MONTH) + 1) + "";
        String toDD = "" + to.get(Calendar.DAY_OF_MONTH);
        Calendar from = Calendar.getInstance();
        //I set the date to 30 days ago right here
        from.setTimeInMillis(to.getTimeInMillis() - 1000 * 60 * 60 * 24 * 30);
        String fromYYYY = "" + from.get(Calendar.YEAR);
        String fromMM = ""+ (from.get(Calendar.MONTH));
        String fromDD = ""+from.get(Calendar.DAY_OF_MONTH);
    System.out.println("toYYY is " + toYYYY);
        System.out.println("tomm is " + toMM);
        System.out.println("toDD is " + toDD);
        System.out.println("fromYYYY is " + fromYYYY);
        System.out.println("fromMM is " + fromMM);
        System.out.println("fromDD is " + fromDD);However, the display result is incorrect for the day that is 30 days ago, can somebody tell me what i did wrong, or rather, let me know if I should use something different to get the date that is 30 days ago
    thanks

    [url http://www.javaworld.com/jw-12-2000/jw-1229-dates.html]Calculating Java dates: Take the time to learn how to create and use dates
    [url http://www.javaalmanac.com/egs/java.util/CompDates.html]Comparing Dates
    [url http://www.javaalmanac.com/egs/java.text/FormatDate.html]Formatting a Date Using a Custom Format
    [url http://www.javaalmanac.com/egs/java.text/ParseDate.html]Parsing a Date Using a Custom Format

  • I have already purchased WALKING DEAD:EPISODE 2 TO EPISODE 5 in that app at December 17th 2012,why it charge me $15.99 again 5 days ago when I downloaded the EPISODES in my iPhone ?

    I have already purchased WALKING DEAD:EPISODE 2 TO EPISODE 5 in that app at December 17th 2012,why it charge me $15.99 again 5 days ago when I downloaded the EPISODES in my iPhone ?

    That is not a practically empty xinitrc - that file only needs one line: exec WM.  Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
    Is slim involved?  Probably.  That is the source of many problems.  But to start narrowing this down, I have 3 suggestions:
    1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
    2) at a tty in runlevel 3 use "xinit" instead of "startx".  Startx is fine most of the time, but it is essentially just a complex wrapper for xinit.  That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult.  So for now just use a vanilla 'xinit'.
    3) remove dbus-launch from your exec line in xinitrc.  This is done by console-kit so it is redundant and potentially problematic.  Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them.  Just make that line "exec openbox-session"
    Edit: adding one more:
    4) temporarily switch out openbox-session for openbox.  I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
    Last edited by Trilby (2012-10-03 17:30:36)

  • IPhone has stopped playing certain songs, crashes when apps are opened

    Over the past few days, I've started experiencing some odd problems with my first-gen iPhone. The first problem I experienced was that third party apps purchased from the iTunes store wouldn't open. When I selected them, they would launch and then close right away. This happened with most - but not all 3rd party apps. All of the basic iPhone processes, like YouTube, stocks, email, etc. all worked fine. I've tried resetting or recharging the phone - sometimes it works and I can then open the apps and other times, it doesn't and the problem continues.
    The other issue is that some songs won't play on my iPhone. The song comes up in the player but there's no sound. I did a little bit of investigating and it appears that the songs that won't play were purchased through iTunes and not loaded from a CD. I'm not experiencing this issue with every purchased song, though. Some of them play, others will not. From what I can tell, there's no discernible pattern for which songs play and which don't. I thought perhaps it was an issue with the amount of time since I had purchased the song but that doesn't appear to be the cause. I have some songs I downloaded a year ago that will play, where other year-old songs will not. Similarly, a few songs I purchased just last week won't play, where others purchased last week will. I can play these songs on other hardware - my iMac, streaming through AppleTV.
    I've tried everything - resetting the phone, removing the content and reloading it, and finally doing a factory reset on the phone but nothing has worked. This phone is close to 2 years old. Is it on its last legs? I'm waiting on the iPhone 3.0 and will most certainly upgrade so I'm not overly concerned about the long term effects of these issues. However, since I'm anticipating that the new iPhone won't be released immediately, I'd like to have a working iPhone for at least a few more weeks. Any ideas what might be happening?

    Try restoring your phone as new, not from a backup. This is different from a rest. See p. 141 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • Hi, I can't load the videos from youtube or other sites for 2 days now. It waits a long time to open the videos, or waits until all the video is downloaded. It wasn't like that until 2 days ago. How can I fix this problem? Thanks in advance.

    can't watch videos, waits a long time to open it, or it never opens it.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • I had purchased an albums months ago, but a few days ago when I got a new iTunes card... It charged me for it again. Why? How the heck can I fix that? It's money lost, I already payed for the album.

    Seriously, what is up with this??

    If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
    Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

  • For iphone 4gs, i was wondering when they will send out an update that will finally fix the stupid text problem. When ever i open my textes, sometimes it would spaz put or something and wout take 2-3 minutes just to finally be able to see my text

    I would go to my textes and it would take about 30seconds and then crashes, i would close the phone go back and it fail to open again then my phone and the imessages would spaz out. Its really frustrating. I do hard resets and everything but nothing fixes it. When will there be an update that fixes this problem? Plus there are times when i press to close my phone but it doesnt close, i try pressing multiple times after waiting a while a little bit later, it then closes....

    There is no such thing as an iPhone 4GS.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the problem is resolved.
    If these steps fail to resolve the issues, take it to Apple for evaluation.

  • When ever I open firefox it always go to the page I last had open. How do I make it so that after I close firefox and next open it that it will go to my home page instead?

    The above should be more then enough detail. I do not want the page I was on saved if I close firefox. I didn't used to do this. Before I performed a reformat(yesterday) firefox always went to my home page on launching firefox. I don't know why, it just always did maybe it was a carried over setting from the previous version of firefox or something. The only time it ever didn't was if firefox crashed, which in that case is the only time I want my current page and tabs saved. Can you tell me what I can do to make it so it doesn't do this? This is extremely irritating and unless I can fix it I'm switching to chrome.

    # Click the orange Firefox button, then select Options to open the options window
    # Go to the General panel
    #Change the setting "When Firefox starts" to "Show my home page"

  • "Don't load tabs until selected" ... Where is the setting so that it affects the tabs when I click "Open all in tabs" from History?

    I am trying to reload all the tabs from history, it's a couple thousand. I am not concerned about system RAM I have 16GB. I know it will be slow, I'm not looking for any warnings or questions about why I have to reload that many tabs or how to work with the restore.bak sessionstore files.
    The question I need an answer to is, "What setting do I need to change so that when I reload multiple tabs, it doesn't say "connecting" on all of them even though I have already selected "Don't load tabs until selected"

    I think we both understand what you want. And we're both saying we are not aware of any built-in way to do this.

  • I want know that when ever i open a new tab, i should get all the websites visited in small tabs. How can i get that ?

    On opening a new tab, i should get all the previously visited websites in small or medium tab format. How can i get that ?
    Please help me with that.

    Is this a Thunderbird question?

  • My Mac Mini has a password and a wireless keyboard and mouse that have been working well with bluetooth until two days ago when my keyboard stopped responding. Since I have a password on Mac Mini, I am unable to access settings to pair Mac Mini. Thanks.

    Can anyone help me pair my BT keyboard with my password protected Mac Mini? I am currently unable to log in to Mac Mini since the BT keyboard has become unpaired.  The wireless mouse is working.  I also have an I Pad and an I Phone as well as Mac TV.
    Please help!!
    Thank you.
    Gail

    I had exactly the same issue, that the Apple wireless keyboard became unpaired, and I couldn't get past the password-protected log-in screen, because I didn't have a wired keyboard laying around.
    OK folks,
    Discovered by trial and error that it was the wireless mouse (not an Apple brand) that was preventing the keyboard from pairing, even though it's not a bluetooth mouse...
    Here's the steps I used...
    1. Disconnected the USB  mouse cord from the Mac Mini.
    2. Turned off the Apple wireless keyboard from switch on the back.
    3. Turn Mac Mini off, then back on.
    4. Waited for it to boot up as far as  the password-protected screen.
    5. Turned on the Apple wireless keyboard, waited for it to stop blinking, indicating (hoping) that it paired        up.
    6. And voila... was able to then type in the password...
    7. Then plugged the non-Apple wireless mouse sensor  cord back into the Mac Mini's USB port
    I also immediately went in to the MacMini's Sharing options and set that up for remote management in case something else happens down the road for other problems...
    Thanks though to all who suggested solutions... they may come in handy in the future.
    Hope this helps someone else...
    Lynda

Maybe you are looking for

  • 6500a e710 a-f - Scanner Communicat​ion Error Windows 8.1

    We have been experiencing issues with scanning whilst connected via USB, using the HP Scan software. The software returns an error message saying scanner communication cannot be established, half way through scanning. Then HPScan.exe fails to load ag

  • Assign activity for Complex XML type in BPEL

    Hi All, I am NEW to BPEL. I am trying to assign a constant value to a XML Fragment of complex type in BPEL. Here is my XSD definition. <xs:element name="AssetGetList"> <xs:complexType> <xs:sequence> <xs:element xmlns:q59="http://schemas.datacontract.

  • Copy data from Berkeley DB to Oracle tables

    Hello I need to get data from Berkeley DB to Oracle tables. Any help/tools to this? Thanks for your help in advance. So far 1. I asked developers to dump BDB in flat file. 2. Created external tables & loaded into permanent table using CTAS. Cheers

  • Using Essbase as source for OBIEE 10.1.3.3

    Our company is in the process of implementing OBIEE 10.1.3.3 and I was trying to import an Essbase database (7.1.6) as a source for the Physical layer. However it looks like there was a change from 10.1.3.2 to the version we have. The docs show you c

  • Console Application Stopped Working : Problem Event Name: CLR20r3

    When executing the SMSConsoleApplication.exe on my server (via rdp) the process opens and closes within a few seconds by monitoring it via task manager. This happens when I run it as my user or as local admin in the server. When I execute the app on