Aol receives email but does not send emails.
I was having a problem with my AOL account set up on my droid's and could not send emails out. I went all over the web and could not find an answer. I went to Verizon store today and I kid you not an hour later we got it to work.
Go to app menu the lower middle circle triangle
go to settings
go to accounts
click on AOL email
go to outgoing server
smtp.aol.com
port-465
username
pass
and check both squares
use secure connection and verify cert..
I hope this helps someone too!!
Good luck!
Thanks for that advice, and I'm glad it worked for you. When I first got the Droid X, I had a problem with my AOL mail not getting to my phone quickly (sometimes it took a day or longer), and occasionally, the mail would not send. I started using K9 email app from the Market, and the mail gets to me within a few minutes (most times) and I've had no problems sending mail.
Similar Messages
-
my new centro seems to have a problem with set up.
now the unit receives calls but does not send ; does any one experienced a "se up" prolem?
Post relates to: Centro (AT&T)If your are unable to send phone calls I would recommend that you contact your carrier about this. If you feel this is the device you can do a hard reset on it and before you sync try to place a phone call if that resolves the issue then go to your backup folder located here:
XP
C:\Program Files\Palm or Palm One\[hotsync username]\backup
C:\Palm\[hotsync username]\backup
C:\Program Files\Handspring\[hotsync username]\backup
[Palm Desktop 6.2 only] My Documents\Palm OS Desktop\[hotsync username]\backup
Vista
Start-->Documents\Palm OS Desktop\[hotsync username]\backup
Mac
Macintosh HD : Applications : Palm : (Palm username) : Backup
Macintosh HD : Users : (Mac username) : Documents : Palm : Users : (Palm username) : Backup
And rename the backup folder to backupOld. Then sync. If this does not resolve the issue you may need to call the carrier to be sure that your SIM card and device is setup correctly. -
Mail receives email but does not send
Hi,
I've just started to use Mail and am now using it to send and receive an email account that I used to run through Thunderbird on my Windows machine.
Mail can receive email for me, but it won't send it. When I try to send email, first I get an error message:
“... does not appear to be a valid email address. Please check the address and try again.
Then another:
This message could not be delivered and will remain in your Outbox until it can be delivered.
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
What's the problem? The settings are the ones I've been using for years. This is the only thing in OS X that hasn't worked yet!
Any help would be great.
Cheers,
PhilHi,
I just thought I would jump in here because last night I starting having this same problem. I have used Mail for years for my POP accounts (I have about five that I access through the program). I can receive mail; however, I cannot send it. I receive messages like:
"The server response was: relaying mail to hotmail.com is not allowed"
When I try sending the mail through my .mac server, I receive a message that tells me I am not recognized as a .mac member.
However, I can log into my ISP webmail and my .mac account just fine.
I have tried deleting the account and readding it; this hasn't made a difference to the outgoing error message. I use my ISP server to access email, etc. The Server Port Number I use is 110 for the POP accounts and 143 for the .mac, and I have selected None for authentication. There is a discrepancy in server ports. In the general account information settings, the server number is 25; in the advanced account settings, the server number is 110. Changing both numbers to 110 hasn't made a difference, and I cannot alter the port setting in the advanced settings.
Additionally, I can send email to myself or any of my accounts through my ISP--it is only messages to email addresses with different ISP's that I cannot send messages to.
Any ideas?
Thanks.
lsb -
TBird will receive gmail but will not send emails with TBird wants new password..
I can send and receive gmail online OK. I have a problem now that used to work. When I want to email a link to a page or send an email directly from TBird I get and error message. I tried retyping the gmail password but I get the same error message. I tried following some of the instructions on other pages, but I got all tangled up in all the words and examples not matching what is on my TBird
Please answer in simple English,
Thanks,
Bernadinehave you configured two factor authentication on Google (they send you a text usually with a password)
-
Everyday it seems to be some new problem with this Program and I am getting very frustrated. I have created a quiz and set it up so that when you get the results you click on the "Send E-mail" button. In the preview project mode this opens an email with the results and all you have to do is send it. Perfect right? I have since published this, and now when you pass the quiz and click on "Send E-mail" all I see is a yellow triangle with "Error on Page" in the lower left of my screen. Can you help me figure this out and give me some suggestions on how to fix this? I really need some way to be notified when the person has successfully completed the quiz. Thanks!
Hi there
Please take a look at the link below.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Email client does not send email (gmail account)
I configured the email account correctly and can see inbox emails. The problem occurs when sending out emails. It keeps trying without giving any error so I have to kill the app to use the client again.
I have a double secured gmail account but I created a unique signin password for this clientHi Gabriele Vidali,
I used the double-secured feature on my Gmail account and then created a unique password for the Mail app in my Firefox OS device with Flame v2.0.
I was able to send and receive emails from my double-secure Gmail account with no problems. I didn't receive any errors when sending the email, and the automatic sync worked correctly.
Where did you download version 2.1 from?
I would suggest rolling back your Flame device to at least version 2.0. The version that you are currently using is still very unstable, and it's still actively being worked on, so it's not uncommon that features and apps will break.
Version 2.1 is scheduled to be Feature Complete on October 13th, and then there will still be stabilization and optimization work done on it. Mozilla's code on version 2.1 of Firefox OS is scheduled to be Code Complete on November 21, 2014 - so there's still a lot of work to be done on that version. =)
I hope this information is helpful. Please let us know if you are still having issues sending and syncing your emails on more stable versions of Firefox OS.
Thanks,
- Ralph -
Recieve emails but can not send. email rejected by server
I am able to recieve emails on iphone 4s but cannot send. POP outgoing server settings all same as on PC. Error message is "the recipient,XXXX was rejected by the server". email account is hosted by GoDaddy.com
Hi, Lawernce.
Your issue with the iPhone's Mail Application might be due to two factors - 1. The otugoing server information might be incorrect. 2. The outgoing server credidentials might be incorrect. To change these, tap settings from the home screen, tap the Mail, Contacts, and Calendars button, tap the account you want to change, and contact Go Daddy for the correct server credidentials.
Austin James Gibson
CEO, AustinWireless, Inc. -
My iPad 2 will receive Email but will not send it . Any Suggestions ?
I have recently acquired an iPad 2 which I have attempted to set up .
It will receive Email but will not send Email .In outgoing mail I have
SSL turned on and the server Port is 465 . I have previously tried Server Port 993
and Server Port 857 with negative results. Any suggestions ?iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Just got an Iphone - Receives email but can't send email to anyone ( POP ). Error Message : "The recepient ... was rejected by the server because it does not allow relaying." Please help............
Hi johnnytoo!
I know it's aggravating when you need to send an email and it doesn't go through! I have a link that provides step by step information from Apple's website that should resolve this for you.
http://support.apple.com/kb/TS3899
Please post back with your results, and have a good day!
Christina B
VZW Support
Follow us on Twitter @VZWSupport -
I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?
Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated! -
I have a tiscali email account set up on my iPhone it receives emails but will not send - any one had the same issue ?
Of course you can't it is a generic document for use worldwide on every carrier mail service
The link will tell you how to set up with the info you will have received from TalkTalk when they installed your broadband
You just add that info for SMTP settings
in iPhone
settings>>>>mail contacts a7 calendars>>>chose relevant service (tiscali or TT which ever it is called >>>outgoing mail server
all as decribed in the above document
now read the doc again and follow the instructions once you have established the correct settings from your
TT documentation -
I am having trouble with my wife's new iPhone 5s. She can receive her telus email but can not send any email what did I do wrong in setting up her account on her iPhone? I tried to just copy the info from her old iPhone.
The sending of email is accomplished via the SMTP server. Take a moment to get back into Settings>Mail, contacts, calendars and select the account. Go to the SMTP server and check to make sure that username and password are entered in all of the appropriate places. If you cannot get it to work after trying to just change those settings, remove the account from the phone and recreate it. When recreating, make sure you enter the username and password in every location, even if the phone says optional. Make sure you have the settings from either the email provider or from the other device. Make sure that SSL is on or off as necessary.
-
Mail receives but will not send email
Mail receives but will not send email. This started about 2 weeks ago, I have a Time Capsule, but when i pick a date to restore the Restore button doesn't light up. Thanks for any help,
OS X Mail: Troubleshooting sending and receiving email messages
-
My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer. -
I can receive emails but can't send emails. Can someone help me? Thank you.
I can receive emails but can't send emails. Can someone help me? Thank you.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Maybe you are looking for
-
IOS 5 overwriting original photo when saving edits
I've recently upgraded to an iPhone 4S running iOS 5 and I think I've found a bug in the Photos app. When a photo is edited and saved in the Photos app, the original photo is overwritten. I've seen this behavior on three AT&T iPhones (a 4S and two 4s
-
Full list out of compressed information
Hello, I'm looking for an idea to get a full list out of compressed information. The data looks like rank count value 1 36 100 2 12 50 What I would like to get via sql is something like rank count value 1 1 100 2 1 100 36 1 100 37 1 50 38 1 50 48 1 5
-
CS4 Web Premium Upgrade Price Seems Unfair
We own CS2, Macromedia Studio 8 and we have the CS3 Web Premium. The upgrade price to CS4 Web Premium is $599. This is the same price for someone upgrading from Studio 8 or CS2 Premium. What about the people who have bought each upgrade (not counting
-
1 matser idoc generated but 0 communication idoc .
hai all. am practising ale-idoc.and sending material with message type MATMAS. i done rfc connections . b/w 800 n 810. i got it . but my prob is 1 master idoc generated for message type MATMAS. but 0 communication records generated for msg.type MATMA
-
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
Windows Server 2008 R2 Standard. I open the "Windows Server Backup" node in the Server Manager and see the error message in the system log after that. Sourece: Kernel-EventTracing EventID: 2 Session "WbadminUIInBuiltTracing" failed to start with the