AP 1200 and authentication

I have an AP configured with WDS and authenticate via a radius server. I notice that when i enable a user they are asked for a login but if they drop the connection or even shut the machine and go to log back in, they are NOT prompted for their login again. Is the AP caching that login and is there a timeout that can be set?

The Cisco Secure Server version I am using is 3.2(3).
Thanks

Similar Messages

How do I bind to directory server with SSL and authentication?

I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
Here are the problems:
1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
2) I was never prompted to authenticate for the directory binding.
So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
Thank you.

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

Re : Remove System and Authentication from QaaWS login dialog

Hello there,
Hope all is well. I am trying to get rid of OR pre-populate with default values for System ( CMS) and Authentication boxes from QaaWS login dialog. I know you can do it in Desktoplauch and Adminlaunch ( Yes I am using BOXI R2 SP5) ...by modifying/editing web.xml deployment descriptor ....where would you do this for QaaWS login boxes ....DSWS application ?
BTW, my .SWF O/P doesn't reside in Infoview ans is out of BO environment. Also, I want users to login with there AD login....hence didn't want to embed credetials in XC.
Thanks in advance,
Sam
Edited by: samshaw on Jul 28, 2010 4:10 AM

Hi David,
Sorry I appreciate this is an old post, but I seem to be going around in circles.
I understand how to generate and pass the sessionID into a SWF, and I can see the QaaWSHeader.sessionID element in the QaaWS WISDL, but do you or anyone else know how to pass the session ID back using this element?
There are no obvious options when in Dashboard Design (Xcelsius) - I tried appending QaaWSHeader.sessionID to the URL call also with no succes (just seems to ignore it).
Does anyone know how this can be achieved.
My ultimate objective is a SWF hosted outside of Infoview that can consume and share the one session for multiple QaawS and OpenDoc calls.
Thanks in advance
Wilf

When trying to print I get error code 30892 and authentication required how do I fix this?

I am new to my Mac and am having trouble printing. I keep getting error code -30892 and authentication required and it can't print. I have sharing features open on both my PC and my Mac. Any suggestions?

Doesn't sound like any error number I'm familiar with. What's your set-up? Are you using a print server?

[HELP] connection and authentication drivers

Hello,i'am an italian student
i'd want to use an authentication driver to force the user to authenticate (insert Username and password) for Olap access and BIcatalog access when launching my java client.At the moment the authentication is done through the configuration.xml and DAD files,but i'd want that is the user that specify his credentials.
I studied the guide "managing security" but i did not understand how to register and use this driver.
I tried to add the line
<PluggableDriver DriverType="a" InvocationLevel="session" Required="true"
DriverClass="oracle.dss.appmodule.server.DSSApplicationModuleAuthenticationDriver"/>
in the configuration.xml file,but it does not work.
Someone knows how to use the connection and authentication drivers?
Thanks very mutch for help

Is there really no one who can help me with this?

Separate LDAPs for Users information and Authentication

Does anyone know how to point the Directory Provider and Authentication provider to different LDAPs? This is very easy to do with Policy Server by configuring the login-config.xml file to use the com.adobe.edc.server.provider.authentication.login.LDAPLoginModule class and specifying the LDAP connection properties. However, I have yet to find a way to do it with Workflow. I tried doing it exactly the same way as policy server, but that does not work.
Has anyone done this before, or know how to do it without writing code? I don't want to have to write my own LDAP authentication provider if one already exists (which it does for Policy Server).

Hello Linda,
This is possible. You can have project online and Project Pro for office 365 on two different tenant. Once you install Project Professional, you need to configure the account in project professional to connect to your project online tenant. Below article
contains the steps connect to project server from Project Professional. In step 4 user have to enter the URL of Project online tenant and when they try to connect they need enter their Project Online credentials. Everything should work as expected.
http://office.microsoft.com/en-in/project-help/connect-log-on-to-project-server-HA010373238.aspx
In fact once you install the Project professional for office 365, you can connect to any PWA instance to which you have access to (on-premise and online).
Hope this helps!
Kiran K.

Number group nt maintained for CC 1000 section 1200 and Business Place

Dear All
Experts.
Hi,
We are facing an error while performing J1INCHLN. At the time of posting outgoing payemnt
through F-07 we are getting following error.
" Number group not maintained for CO code 1000 section code 1200 and Business Place 194C."
However we have maintained the the section code and number range for respective section
codes i.e. 1200 & 1300 as number range group 02.
Still facing the same problem.
Please help on this.
Regards,
Sharvari Joshi.

Dear,
Sometimes number range groups have been maintained but not the proper tables. Check table J_1IEWTNUMGR_1 in SE16 if number range gorups have been maintained, if not then maintain this table using SM30 or SE16.
Regards,
Chintan Joshi

OAM (authorization and authentication)

Does OAM offer any cape Web Services for the authorization and authentication?
Thanks in Advance, Awaiting sooner response.
Edited by: Odemail on 05-abr-2012 8:31

For this you can check with Oracle Support
Thanks
kumar

How can i know the Authorization and Authentication in BusinessOne?

Hi all,
    I want to know about the User Autherization and Authentication of a particular User. In which table or file this information is stored?
             In CPRF Table i am getting only UI Related Authorization information. That is not clear too.
        But i need particular users Authentication and Autherization information for each Object(SalesOrder, SalesInvoice,....).
Thanks in advance,
RAMU.

I think this 2 posts will be helpfull:
Regards,
Ibai Peña
PS: mixed the first link... I though it was a link to a thread where said same as Sebastien. Sorry.
Message was edited by: Ibai Peña

System server and uri and authentication for usermapping

hi,
For single signon usermapping, I found mailserver is login.yahoo.com and uri is /config/login and authentication is login=<username>&passwd=<password>.
My request is please give me the same as mailserver and uri and athentication for gmail or any other mail.
Thanks,

Thanks Cyril.
Using -startconsole -D 9, I saw that there was an LDAP error and it could not find the adminURL. Also, I saw another error that ds523.jar could not be found.
-startconsole -D http,ldap showed different information:
Exception in thread "Thread-4" java.lang.UnsatisfiedLinkError: C:\Program Files
(x86)\Sun\MPS\lib\jss\jss4.dll: Can't find dependent libraries
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.mozilla.jss.CryptoManager.loadNativeLibraries(CryptoManager.java:
1333)
at org.mozilla.jss.CryptoManager.initialize(CryptoManager.java:825)
at com.netscape.management.client.util.UtilConsoleGlobals.initJSS(Unknow
n Source)
at com.netscape.management.client.util.UtilConsoleGlobals.getLDAPSSLSock
etFactory(Unknown Source)
at com.sun.directory.wps.ui.gui.view.PSWServer.<init>(PSWServer.java:71)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Sou
rce)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.netscape.management.client.topology.ServerNode.createServerInstan
ce(Unknown Source)
at com.netscape.management.client.topology.ServerNode$ServerLoadThread.r
un(Unknown Source)
I'm assuming ds523.jar is the main issue but then again I'm not sure.

RoleEntityACL|Role Access List | no values, guest and authenticated not shown

All,
I enabled RoleEntityACL from configuration manager. Role access list field shows up, but when I type **, there are no values at all. Not even guest and authenticated, OOTB values.
I added UseEntitySecurity=true, I am able to see add Users and Groups when i type ** in the input field.
Any pointers here?
Thanks
~

Srinath,
I need to see the guest and authenticated values by default after enabling the "RoleEntityACL". Am i missing something here. I have Roles text box enabled, but it is not giving any values even if type **, g or a.
If i get those values, i can go to configuration manager applet and then add more values.
However, I did all those u mentioned. Added a new role in ExternalRoleView, Published Schema and Schema Base. Restarted UCM server. But i see null results.
In General Configuration:
UseEntitySecurity=true
SpecialAuthGroups=TestGroup,Public
In Advanced Component Manager:
Enabled RoleEntityACL.
I am able to add users and groups(aliases) in the access control list at the folder level. but not any roles. Am i missing something here?

Webservices security and authentication..?

Hi Guys,
Thanks for the previous help. Can anyone suggest a solution/mechanism to
enforce security and authentication for published webservices?
I have situation where an external system (of Business Partner) would
like to request-services of webservices deployed via SOAP XML messaging.
How could i authenticate the system requesting the service is our
business partner system?
Any suggestions welcome,
thanks\
RA

You have two choices:
1. Use HTTP simple ( password based ) authentication. This is
usually called transportation level authentication.
2. Use SOAP signature and time stamp (X509 Certificate based) authentication.
This is called content level authentication.
In both case, you need modify the SOAP client to put in authentication information
and add interceptor in server side to do actually authentication before SOAP router
actually dispatch the calls to the service.
Heyun Zheng
Ramesh Ankam <[email protected]> wrote:
Hi Guys,
Thanks for the previous help. Can anyone suggest a solution/mechanism
to
enforce security and authentication for published webservices?
I have situation where an external system (of Business Partner) would
like to request-services of webservices deployed via SOAP XML messaging.
How could i authenticate the system requesting the service is our
business partner system?
Any suggestions welcome,
thanks\
RA

Creative HS-1200 and my Logitech G7 stuttering... :( sollution?

Hi,
i've got something of a problem. I have recently purchased a Creative HS-1200, and have only 2 problems...
The headset causes my Logitech G7 mouse to stutter. This is véry anoying.
The second problem is that the sound comes a fraction later, for example shooting a gun with a "bang" sound in Call of Duty 4 isn't synchronised...
Is there a solution for both of my problems?
Thanks in advance!
Message Edited by venom1st on 11-15-2008 12:31 PM
Message Edited by venom1st on 11-15-2008 12:32 PM

Hello Visionblind,
You might want to check out this thread.

AP 1200 local authentication PEAP

Can I use AP 1200 with configured local radius server as authenticator for Windows XP clients using PEAP auhentication metod ?

Unfortunately the answer is no because the PEAP method is based on a certificate authentication that you install on the Server and on the client, so since you cannot install the certificate on the AP it would not work.

WDS and authentication

We have 1200 APs configured with mobility networks (mGRE tunnels terminated on a WLSM). The APs are pointed at the WLSM WDS and pass their authentication requests to the WLSM acting as the WDS using WLCCP. However, these APs also provide wireless access to the local wired networks. This can be configured, but it appears that all authentication requests go via the WDS (i.e. all locally configured RADIUS servers for local network authentication are ignored).
The WLSM Deployment Guide suggests that it is possible to have "WDS" and "non-WDS" SSIDs coexist. The consequence is that the availability of the WDS (on the WLSM) becomes critical, even for APs which could authenticate local wireless users through RADIUS servers configured directly on the AP.

WDS checks its local list for authentication . If the Mac address is not present it uses configured Radius server for authentication. Make sure Mac address is either in the Local list or Radius server. If you are using Radius server make sure Mac address is configured as user

AP 1200 and authentication

Similar Messages

Maybe you are looking for