AP 1242 WGB may be associate with mesh LAP 1522 in 5Ghz?

Hi,
It is possible to associate AP 1242 configured as WGB to mesh LAP 1522 in 5Ghz band?
Thanks.

Thanks Elliot.
I want to convert AP1242 to LAP1242 and then to mesh but i need enterprise wireless mesh licence on WLC.
If i have enterprise wireless mesh licence i want to know if  this scenario is functional ?
In this scenario i want to transport 2 Vlans over mesh wireless (one of the MAP is LAP1242) network.
It 's possible?
WLC ------- Switch (Vlan10,Vlan20 ) ------- RAP (1522, 5Ghz, Ethernet Bridge )  ------- MAP (1522, 5Ghz, Ethernet Bridge) -------- MAP (1242, 5Ghz, Ethernet Bridge) -------Switch (Vlan10,Vlan20)

Similar Messages

  • I have a lot of contacts in my phone that are not mine. In addition, my contacts are showing up on peoples devices that I do not associate with. Why is this happening?

    I have a lot of contacts in my phone that are not mine. In addition, my contacts are showing up on peoples devices that I do not associate with. Why is this happening?

    Hey Raffiecat,
    Thanks for the question. If your iPod is setup to manually manage content, you can add content from multiple libraries:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad.
    You can also learn which content you can import to your new computer from your iPod:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Or, if you still have access to the previous computer, you can transfer your iTunes Library:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Thanks,
    Matt M.

  • Can not associate with the access point

    Greetings!
    I am just new here. I am trying to set-up a wireless connection from our linksys router. I recently purchased a linksys wireless internet receiver thru USB connection. Now, my problem is the pc that is supposed to receive a wireless connection is stating " can not associate with the access point". I am not too good about computers, that is why I am seeking you help.
    I hope I can hear from you guys.
    Thanks in advance.
    Cheers!
    Square

    Lets start with the bad news, no wireless connection. Good news, fixable.
    Make sure all your security settings on the usb adapter are correct. If router is set for wep set adapter to wep,and so on. Also check all your firewalls, in windows, and on any virus suites that you may have running. Try turning off all firewalls, other than router, and see if that helps. Also download the easy link advisor from the linksys home page. Make sure your ssid, and network names are set the same for router, and adapter.
    Stlbluesfan30
    Cisco Network Academy Student

  • I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

    When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
    What is the answer to fix this?!

    Backup for safety on at least two reliable drives.
    Reinstall using the combo update at http://support.apple.com/kb/DL1746
    You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • How do I set up my new Macbook Pro to associate with my Apple ID so I can download purchased music?

    How do I set up my new Macbook Pro to associate with my Apple ID so I can download purchased music?
    Under 'Manage Devices' it only lists my iPhone and iMac. I've bought stuff on my new Macbook Pro using my Apple ID, but I can't find music I previously purchased using the iMac.

    Oh, wait, I've found it. Silly me!

  • Can you get an Apple ID for corporate use to associate with more than 10 devices?

    Can you get an Apple ID for corporate use to associate with more than 10 devices?

    I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
    Regards.

  • I'm buying a new MAC.  How many machines can you associate with one CS Cloud account?

    I'm buying a new MAC.  How many machines can you associate with one CS Cloud account?

    You can install the software on as many computers as you like.
    However you can only activate the software and use it on a maximum of two computers at any one time.

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • LV 8.2 won't associate with VIs and uses 7.1 RTE?!?!

    Hi,
    I'm in the process of creating a new exe of our project. A strange thing keeps happening and I don't know what's wrong. I had LV 7.1 installed on the machine, as well as LV 8.2 to transition to the new version. I created an .lvproj and built a new .exe of our application. Lo and behold, it flashes the LV 7.1 flash screen and then asks me to select the VI I want to run, when i select the main VI of the application, it simply gives me an Error 9 message and says that that vi is compiled in version 8.2 of LV and won't open. I tried right-clicking on a vi and trying to force it to associate with 8.2, that didn't work. I uninstalled 7.1 and the 7.1 RTE entirely and when I try to run my LV 8.2 built exe it STILL manages to use the 7.1 run time from somewhere.
    After that I tried to re-associate them with 8.2 yet again to no avail. When i run my exe it just tries to open them in the non-existing 7.1 RTE and re-associates them all with 7.1. Please help, i think this is a bug.

    Justin,
    Thanks for the reply. I do understand how bizzare this must seem to you, I had the same reaction. I know perfectly well the behavior of LV built exe, been using it for 5 years. The problem here is the bizzare behavior of the .exe (any in fact, i've built several test vis and exes) on 3 different machines.
    I'll try to explain what's happening:
    1) I create a new project
    2) I add my Test.vi to the project
    3) I set my Test.vi as the startup vi (Test.vi simply calls my main vi via the vi reference).
    4) I build the exe and execute it
    5) Upon execution, an LV 7.1 splash screen pops up for a brief second and I get an Open VI file dialog box asking me to select a VI I want to open, all the VI files inside that window take on the appearance of LV7.1 icons, instead of 8.2. If I try to select a VI from that window, I get LabView load error 9: VI version (8.2) is newer than LabView version (7.1).
    I'm used to that error after you recompile a 7.1 vi to 8.2, but I don't even have LV7.1 installed. It seems like the exe is trying to use LV7.1 RTE to run itself instead of 8.2. I though I have 8.2 RTE automatically installed by LV Dev, but I guess not since it doesn't show in Add/Remove Programs menu, but it DOES show up in MAX under software, go figure. I wish I could get someone in NI to look into this. I've never had a problem like this, it is happening on 3 PCs here and is taking up a lot of work time. I have source code I can send as well as a short video of what's happening on my machine.

  • I can no longer burn CDs  - "may be incompatible with this disc burner, try slower speed, try another make of disc"  Still doesn't work

    I can no longer burn CDs  - "may be incompatible with this disc burner, try a slower speed, try another make of disc"  Tried that, still doesn't work.

    Try a free burning utility which allows you to turn off the laser for test burning (so you don't waste media).  Try burning a test CD outside of iTunes.  If it works it's iTunes. If it doesn't work it could be computer software or hardware but then we know how to proceed.
    List of burning software on pure-mac.com - http://www.pure-mac.com/diskfile.html
    Burn - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring

  • Adobe Reader does not automatically associate with PDF files in Xp Sp3

    I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
    How do I fix this problem?
    Cheers, JH

    The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
    I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

  • 2702-UX-K9 Access Point will not associate with controller.

    Hi,
    I recently purchased nine new 2702 APs.  Two of them will not associate with the controller.  I realized they they had a different part number.  They ended with UX-K9 instead of -K9 like the others.  It turns out that these are new AP that are universal for any country.  They APs find the controller but need some sort of password to pull the config down.  I"m not sure what this could be? 
    From console of AP @ boot....
    examining image...
    ipv6 enable
      ^
    % Invalid input detected at '^' marker.
    ipv6 address autoconfig
      ^
    % Invalid input detected at '^' marker.
    ipv6 address dhcp
      ^
    % Invalid input detected at '^' marker.
    %Error opening capwap:/ap3g2 (Incorrect Login/Password)
    Download image failed, notify controller!!! From:8.0.110.0 to 0.0.0.0, FailureCode:4
    archive download: takes 0 seconds
    *Mar 18 20:16:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.12.10 peer_port: 5246
    *Mar 18 20:16:49.435: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.12.10 peer_port: 5246
    *Mar 18 20:16:49.435: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.12.10perform archive download capwap:/ap3g2 tar file
    *Mar 18 20:16:49.439: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Mar 18 20:16:49.439: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.12.10:5246
    *Mar 18 20:16:49.443: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
    *Mar 18 20:16:49.451: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
    *Mar 18 20:16:49.455: capwap_image_proc: unable to open tar file
    *Mar 18 20:16:49.715: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
    .... Check out the attached log file for more details.  
    Thanks in advance for the replies! 

    Rasika,
    I have the same issue on my home 2504 with these 2700 UX, I have tried code 8.0.100.0, 8.0.110.0 (Docs say this is the min version supported), and even 8.0.115.0 (latest available) still no dice. The AP won't register, and gives the error stated above. I am seeing 2 images available for the AP, the AP shipped with the later image but  I AP recovery isn't working because it say's unable to find image with XX in the name? I see the TFTP logs, and name the file accordingly no dice, then the unable to find file name -XX pops up too. As you know I am busy during the day this week, but let's jump on a skype and take a look later maybe you have seen something I haven't?
    For good measure, also attempted to join a 3650 here at the house IOS-XE 3.6 no dice, going to try 3.7 too tomorrow, It worked for the 3700 UX AP's we had??

  • Non-root is not associate with root

    I am working to setup the non-root associate with root. I have checked every configuration from the root are the same as non-root. Accept it set to non-root.
    - It is the same VLAN, SSID, authentication is open. I have encryption from both sides are the same.
    It is still not associated. What else should I check from the non-root to get association? Please give me some helps
    I am really appreciated that.
    The root configuration:
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    hostname Root_Bridge
    no logging console
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server tacacs+ tac_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa session-id common
    resource policy
    clock timezone MST -7
    clock save interval 24
    ip subnet-zero
    ip domain name Bridge
    ip ssh time-out 60
    ip ssh version 2
    no dot11 igmp snooping-helper
    dot11 vlan-name Management vlan 51
    dot11 vlan-name User vlan 11
    dot11 ssid LOCALBRIDGE
       vlan 51
       authentication open
       infrastructure-ssid
    dot11 network-map
    crypto pki trustpoint TP-self-signed-4076113752
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-4076113752
    revocation-check none
    rsakeypair TP-self-signed-4076113752
    crypto pki certificate chain TP-self-signed-4076113752
    certificate self-signed 01
      30820261 308201CA A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 34303736 31313337 3532301E 170D3032 30333031 30303030
      33345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D34 30373631
      31333735 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100B329 87F691CA 1107EC3A 9EF4676D 2F96A7E4 42DBB88F 426D78C1 0E9E09A0
      8F5EA9A1 DF88C33A A0DF128A E13E6E59 E9232487 0F5C953C 274DF314 1F48544F
      E213D232 85B1E45A 4D186A9E FF9581E6 3E471891 16B627B6 CB3D8F01 BCFF89E0
      77E8EA44 0E255F75 BFF1299A B3198E9B 61B3056B 8F365D98 2A8D463E F3122C47
      B80D0203 010001A3 81883081 85300F06 03551D13 0101FF04 05300301 01FF3032
      0603551D 11042B30 29822737 3332385F 42726964 67652E64 61766973 2D6D6F6E
      7468616E 2E616363 2E64732E 61662E6D 696C301F 0603551D 23041830 1680145F
      9DB7F2A6 BD563ACB 429F6938 6AF9D336 69139F30 1D060355 1D0E0416 04145F9D
      B7F2A6BD 563ACB42 9F69386A F9D33669 139F300D 06092A86 4886F70D 01010405
      00038181 00372387 521D029A FAE2F579 73EDCF3B FDF262EE 5DF6154E 5469A5BD
      6630E5FD C8A1311A A24493D4 D1856862 8979692B CDFE65D7 29E97B60 FCC37584
      A27FA332 9CC5F175 2EDC871C D41BA4F5 A50634DE 75210305 47240D4F A30D0046
      532F68ED 569CE374 98C5F53D A417CFBF 3A93C98A D399B06E A73E61AB D4889452
      0B695B54 86
      quit
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption key 1 size 128bit 7 E99521751C16125A7754722A6B72 transmit-key
    encryption key 2 size 128bit 7 1857F02303182327EA1A9242A53B
    encryption key 3 size 128bit 7 FE1CF103855EBB2763224F129556
    encryption key 4 size 128bit 7 19A03A5D596B029A01C208EF1C0F
    encryption mode ciphers wep128
    encryption vlan 11 key 1 size 128bit 7 419258EC0B7E6C7413C571760B67 transmit-key
    encryption vlan 11 key 2 size 128bit 7 AB3C5B091B37223F39306B1F7442
    encryption vlan 11 key 3 size 128bit 7 3E1CF103855EBB2763224F129556
    encryption vlan 11 key 4 size 128bit 7 E858C5382B5D5E372A6C0438604C
    encryption vlan 11 mode wep mandatory
    encryption vlan 51 key 1 size 128bit 7 90792B34ACD2C8D18A0B7AF3AC68 transmit-key
    encryption vlan 51 key 2 size 128bit 7 72063EA2FEF03A39E5468E92A7C5
    encryption vlan 51 key 3 size 128bit 7 8607AEADB49EE0B7E4529770D9AE
    encryption vlan 51 key 4 size 128bit 7 F60210B48CB39887A59255187D6D
    encryption vlan 51 mode wep mandatory
    ssid LOCALBRIDGE
    speed  basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
    packet retries 128
    station-role root
    rts threshold 4000
    rts retries 128
    cca 87
    concatenation
    distance 5
    beacon period 20
    infrastructure-client
    interface Dot11Radio0.11
    encapsulation dot1Q 11
    no ip route-cache
    no snmp trap link-status
    bridge-group 11
    interface Dot11Radio0.51
    encapsulation dot1Q 51 native
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    interface FastEthernet0
    no ip address
    no ip route-cache
    hold-queue 80 in
    interface FastEthernet0.11
    encapsulation dot1Q 11
    no ip route-cache
    no snmp trap link-status
    bridge-group 11
    interface FastEthernet0.51
    encapsulation dot1Q 51 native
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    interface BVI1
    ip address 192.168.0.5 255.255.255.0
    no ip route-cache
    no ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    logging history informational
    snmp-server view dot11view ieee802dot11 included
    snmp-server community PUBLICSTRING RW
    snmp-server chassis-id Bridge
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps tty
    snmp-server enable traps entity
    snmp-server enable traps disassociate
    snmp-server enable traps deauthenticate
    snmp-server enable traps authenticate-fail
    snmp-server enable traps dot11-qos
    snmp-server enable traps wlan-wep
    snmp-server enable traps config
    snmp-server enable traps syslog
    snmp-server enable traps cpu threshold
    snmp-server enable traps aaa_server
    snmp-server enable traps envmon
    snmp-server host 192.168.9.10 PUBLICSTRING
    tacacs-server host 192.168.6.100
    tacacs-server host 192.168.4.100
    tacacs-server directed-request
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    bridge 1 protocol ieee
    bridge 1 route ip
    line con 0
    access-class 111 in
    line vty 0 4
    access-class 111 in
    line vty 5 15
    access-class 111 in
    end
    The non-root configuration:
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname Bridge
    logging console informational
    logging monitor informational
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa cache profile admin_cache
    all
    aaa session-id common
    resource policy
    clock timezone MST -7
    clock save interval 24
    ip subnet-zero
    ip domain name Bridge
    no dot11 igmp snooping-helper
    dot11 activity-timeout bridge default 3600
    dot11 vlan-name Management vlan 51
    dot11 vlan-name User vlan 11
    dot11 ssid LOCALBRIDGE
       vlan 51
       authentication open
       infrastructure-ssid
    dot11 network-map
    no crypto provisioning petitioner
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption key 1 size 128bit 7 E99521751C16125A7754722A6B72 transmit-key
    encryption key 2 size 128bit 7 1857F02303182327EA1A9242A53B
    encryption key 3 size 128bit 7 FE1CF103855EBB2763224F129556
    encryption key 4 size 128bit 7 19A03A5D596B029A01C208EF1C0F
    encryption mode ciphers wep128
    encryption vlan 11 key 1 size 128bit 7 419258EC0B7E6C7413C571760B67 transmit-key
    encryption vlan 11 key 2 size 128bit 7 AB3C5B091B37223F39306B1F7442
    encryption vlan 11 key 3 size 128bit 7 3E1CF103855EBB2763224F129556
    encryption vlan 11 key 4 size 128bit 7 E858C5382B5D5E372A6C0438604C
    encryption vlan 11 mode wep mandatory
    encryption vlan 51 key 1 size 128bit 7 90792B34ACD2C8D18A0B7AF3AC68 transmit-key
    encryption vlan 51 key 2 size 128bit 7 72063EA2FEF03A39E5468E92A7C5
    encryption vlan 51 key 3 size 128bit 7 8607AEADB49EE0B7E4529770D9AE
    encryption vlan 51 key 4 size 128bit 7 F60210B48CB39887A59255187D6D
    encryption vlan 51 mode wep mandatory
    ssid LOCALBRIDGE
    speed  basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
    packet retries 128
    station-role non-root bridge
    rts threshold 4000
    rts retries 128
    cca 87
    concatenation
    beacon period 20
    infrastructure-client
    interface Dot11Radio0.11
    encapsulation dot1Q 11
    no ip route-cache
    no snmp trap link-status
    bridge-group 11
    interface Dot11Radio0.51
    encapsulation dot1Q 51 native
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    interface FastEthernet0
    no ip address
    no ip route-cache
    hold-queue 80 in
    interface FastEthernet0.11
    encapsulation dot1Q 11
    no ip route-cache
    no snmp trap link-status
    bridge-group 11
    interface FastEthernet0.51
    encapsulation dot1Q 51 native
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    interface BVI1
    ip address 192.168.0.10 255.255.255.0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    snmp-server community PUBLICSTRING RW
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps tty
    snmp-server enable traps entity
    snmp-server enable traps disassociate
    snmp-server enable traps deauthenticate
    snmp-server enable traps authenticate-fail
    snmp-server enable traps dot11-qos
    snmp-server enable traps wlan-wep
    snmp-server enable traps config
    snmp-server enable traps syslog
    snmp-server enable traps cpu threshold
    snmp-server enable traps aaa_server
    snmp-server enable traps envmon
    snmp-server host 192.168.9.10 PUBLICSTRING
    tacacs-server host 192.168.6.100
    tacacs-server host 192.168.4.100
    tacacs-server directed-request
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    bridge 1 protocol ieee
    bridge 1 route ip
    bridge 11 protocol ieee
    line con 0
    line vty 0 4
    end

    what happens if you go completely open, no WEP?
    and I wouldn't use WEP, it's very breakable.
    Steve

  • Envelope distort with Mesh

    Hi,
    I am trying to create an envelope distort based on a grid mesh within a LiveEffect similar to Envelope distort--> Make with mesh. Given the path shape "art" I create a grid kmeshArt based on its bounding box:
    result = sAIArt->NewArt(kMeshArt,kPlaceAboveAll, nil,&myEnvelopeMesh);
    sAIMesh->InitCartesian(myEnvelopeMesh,width_i,height_j);
    result = sAIArt->GetArtBounds(art, &artBounds);
    //get the corners of the bounding art A,B,C,D, in clokwise order starting at top-left corner.
                                  pointA.h=artBounds.left;
                                  pointA.v=artBounds.top;
                                  pointB.h=artBounds.right;
                                  pointB.v=artBounds.top;
                                  pointC.h=artBounds.right;
                                  pointC.v=artBounds.bottom;
                                  pointD.h=artBounds.left;
                                  pointD.v=artBounds.bottom;
    Now via setpoint and a segment iterator I assign the values to  the four segments of the grid to match the art's bounding box:
    sAIMeshSegmentIterator->SetPoint(segment,0, &pointA); //top left corner point
    pointTMP.h=pointA.h+boundSize.h;
    pointTMP.v=pointA.v;
    sAIMeshSegmentIterator->SetPoint(segment,1, &pointTMP);     //horizontal handle
    pointTMP.h=pointB.h-boundSize.h;
    pointTMP.v=pointB.v;
    sAIMeshSegmentIterator->SetPoint(segment,2, &pointTMP);      //horizontal handle of next point
    sAIMeshSegmentIterator->SetPoint(segment,3, &pointB);
    sAIMeshSegmentIterator->NextOnPatch(segment,kAIMeshCounterClockwise); //top right corner
    I tried to create the envelope object by assigning the mesh a envelopeObject (second parameter) but it doesn't work.
    result = sAIEnvelopeSuite->MakeEnvelope(&art,1,myEnvelopeMesh,&eOptions,&myEnvelope);
    In fact, a call to sAIEnvelopeSuite->GetEnvelopeType(myEnvelope, &EnvType) reveals that it is of type kEnvelopeObject and not kEnvelopeMesh.
    So what I did was the following:
    result = sAIEnvelopeSuite->MakeEnvelope(&art,1,nil,&eOptions,&myEnvelope);
    result= sAIEnvelopeSuite->SetEnvelopeObject(myEnvelope, myEnvelopeMesh);
    In this case the envelope appears where it should be (when expanding the liveEffect object) but it has already distorted the shape within ("art"). If I manually restart the shape (by pressing the button "Reset Envelope Shape")  then it removes the original distortion of the enveloped shape and you can edit it perfectly by moving the vertices of the meshgrid, which behave as expected.
    In the image the (translucent white gradient) star should be aligned with the star behind, but it gets distorted (left) until envelope is reset (right).
    Why is this happening?  Is it because is created within a live effect? Maybe I am making a bad definition of the mesh grid or SetEnvelopeObject  is not properly used...
    Thanks,
    Jorge.

    You are using the the selection tool which will not allow you to grab a handle. So change to the direct select (the white arrow) tool and you will be much happier.

Maybe you are looking for