AP 1552E: Put their antennas in different places

Hi Guys
I have an AP Cisco 1552E mounted on a mining truck (CAT 797F) in a mesh wireless network. I´d like to know if i can place each antenna in diferent places of the truck with 3 LMR400 cables (e.g.: one in the left side, one in the middle and the third one, in the right side),... because when a i place the AP with its 3 antennas in a corner, the coverage is blocked by the truck structure. I know that im gonna lose signal but im looking for a "functional" solution. Do i have to respect a distance between the antennas? I attached an image for a better understanding.
Thank you!

We are currently running systems with over 200 units in the mobile fleet at our largest mine. Running Matrikon, Seeing machines, Modular dispatch, Trimble, IBIS, Centurion and several other systems. We have not seen traffic on the mesh caused by the broadcasts in a flat network cause the network have issues. YET!!!! We do see our Mesh networks growing and have the same concerns but they have not been founded in the three + years we have been running the Mesh with 1524SB radios.
BTY: we have also tested the 819 connecting to the mesh on 802.11g and then rebroadcasting a local SSID on the 802.11a. This could be an asset to our survey crews so they can drive a light duty vehicle in an area that they can get a connection with the 819 (the handhelds don’t have enough power to reach far). They could then broadcast a different SSID around their truck to download map updates.

Similar Messages

I cannot type a capital i using the left shift key. also keyboard now putting the cursor in a different place than where i type. Checked speech keys, all fine. Batteries fine.

i cannot type a capital i using the left shift key. also keyboard now putting the cursor in a different place than where i type while i am typing. Checked speech keys, all fine. Batteries fine. Also used the keyboard check program on the imac, shows key ok.
wireless mouse will suddenly scroll down horizontally and won't stop. when i am on a webpage it will bounce back to the previous page without my doing so. i have tried adjusting the mouse several times, turning it on and off, and now am using my wacom mouse which also seems to have issues with this computer. i have only had this a few months and getting very frustrated.

Can you try a different keyboard to see if the problem persists? Also, you have 90 days of phone support when you buy a mew mac.

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

Setting up Lion FaceTime to connect to iPad on same account but in different places

HI,
This may seem like a dumb question....I am going away on Tuesday and am taking my iPad2 - we are very familiar with using Facetime on the iPad. We just got Lion on the iMac and it now has FaceTime, but I have not set it up...I want to use FacTime on the iMac to chat to my family from the iPad while I am away. Do I need to set up a different FaceTime account on the IMac so that I can connect to it from the iPad2? Or can I call from the iPad to the iMac using the same account...? i.e. does it recognise that even though its the same account its 2 different devices in 2 different places....
Hope that makes sense...?
Thanks

On his iPad, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with the other ID. For FaceTime, do the same thing in Settings>FaceTime.
If you need to change his iPad to a separate iCloud account go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from his iPad, not from iCloud. Your iPad will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPad. Next, set up a new iCloud account using a separate Apple ID, turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, if you have any of each other's data in your iCloud accouts you'll have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want from each account (such as deleting the your contacts from his account, and vice versa).

Is there a way to place page numbers in different places within a document in Pages?

I have a document with multiple chapters and I need to place the page number in a different place at the beginning of each chapter than the rest of the document. For example, on the first page of each chapter, the page number must be at the center in the footer while on every other page, the page number needs to be in the right of the header. I know that there is a way to do this in Microsoft Word but I'm not sure how to do it in Pages. Anyone have any ideas? I would prefer not to have to download Word.
Thank you.

Hi Brian,
If you go with Peter's suggestion, there are some details that since I've got a minute here, I'll mention...
Set your Line Spacing for the document text to "Exactly" before you begin adjusting your table, otherwise you will have registration problems.
Your Table will have to be a Floating object. Otherwise you won't be able to slide it into the margin. And, speaking of the margin, stay out of the gray area with the numbers if you want to print them. The gray border around your document is the area that the printer driver says is non-printable.
In the Table Inspector, set Columns to 1 and Rows to 20 or whatever you prefer for your document. Set the number of Header Rows to 0.
To apply the numbering, use the Fill feature: Type 1 in the first cell, type 2 in the second cell. Select both cells. Grab the Fill Handle in the lower right corner of the selection and drag it down to add a series of numbers to the rest of the column. (Easier than typing.)
Decide how you want to justify the numbering. The Text Inspector has both vertical and horizontal justification controls for this. Just select the entire table and make the settings.
Set the cell height to match the text line spacing. You can get close with the table row height, and maybe closer with a minor line spacing adjustment. Don't expect perfection, but you can get pretty close.
You probably don't want the cell borders to show, so with the entire table selected, go to the Graphic Inspector and set Stroke to None.
Lastly, cause the table to appear on every page by doing: Format > Advanced > Move Object to Section Master.
Regards,
Jerry

I have downloaded the tv shows Homeland and Dexter. They have ended up in different places. Dexter is where is "belongs" in my itunes library on my NAS drive. Homeland ended up on my hard drive in the itunes/music/tvshows directory. Anyone know why?

Several months ago I bought and downloaded Homeland. Earlier this month I bought
Dexter Season 7. They have ended up in different directories. My iTunes library is
on a NAS drive and Dexter was stored there (where it belongs). For some reason,
Homeland got saved to my Mac hard drive in the itunes/music/tvshows directory.
This seems odd everything else I have downloaded, music, other tv shows, movies
have been saved to the proper place. I haven't changed the path to my iTunes
library in years.
Now, iTunes has kept track of these two tv shows and I synced them both
to my iPad. The only reason I know they are in different places
is because my wife couldn't find them on the NAS drive.
Mostly out of curiosity, I'd like to know why this happened and how to keep it from
happening again.
Oh, it's iTunes 11.0.3 running on a MacBook Pro with OS X 10.6.8.
Thanks
Bob

I don't think it is easy to move part of a collection unless you don't care about the metadata such as date added, etc. You can copy the files to the other drive, delete in iTunes the references to the copies still on your computer, then hold down the option key while dragging the files on the external to iTunes so it doesn't copy them back to your internal but just references them where they are. You have to remember to do this each time. Either that, or set preferences so iTunes does not automatically copy any file to your media folder when added but leaves them all where they land on your computer. You can move them by hand around the computer, but not between drives.
You could try Dougscript "Move Files To Folder" but I don't know if this enables iTunes to track items moved to a different drive. iTunes doesn't really like using multiple drives.
As for using Time Capsule, I have seen various takes on this. I recall reading somebody saying it isn't a good idea to have a backup drive competing for dual purposes. My take on it is, TC is a backup, period. If you keep your movies on it and the TC drive dies, you lose your only copy of the movies.
How often do you really watch these movies? Yes, it is nice having them appear in iTunes, but unless you are watching them every day then it isn't a huge burden to have them on another drive. Frankly, if I had iTunes movies I would probably make a whole different library for them and start from it with the external drive turned on when I was in a movie mood.

Hey I got my phone stolen yesterday, but it was dead for 24 hours before i checked find my phone so it says offline. I called verizon suspended my service and they said if the person tried to sell it back, or put their number on it, it will get flagged. I

Hey I got my phone stolen yesterday, but it was dead for 24 hours before i checked find my phone so it says offline. I called verizon suspended my service and they said if the person tried to sell it back, or put their number on it, it will get flagged. I was just wondering if i should reinstate my service and try and wait for it to turn back on and then go get it because you need internet for it to track and with the suspended service, it can only track if connected to wifi, but they wont get past my password.

Where exactly did you buy the "new iPhone "
A country might help as well .This is a WW forum
Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Battery drains differently, in different places. . .

so, it's obvious battery life on the 3GS is less than desired, but i've noticed in the past few weeks that the battery drains at different rates, in different places. does this happen to anybody else here?
for example, keeping 3G, wifi, and location services "on" with normal use (from a 100% charge in the morning), my battery retains power above 90% most of the day while i'm at home or walking/driving about (like on a weekend etc.). BUT when i'm at work, without having used the phone at all, my battery drops (from a 100% charge in the morning) to below 85% by noon time!
what the **** is going on here? why does my battery drain way more at work, without any use, than at home with normal use?

Exactly..And to piggy back on that 5 bars doesnt always mean a "quality " signal. If you look at the AT&T coverage map (which isnt always 100% acurate) and you are on the edge of a coverage area, it may or may not be a "quality" signal. Meaning the phone can pick up 4-5 bars but being on the edge of the coverage area can get interfearence from surrounding objects, like buildings etc...

I was messing with my keyboard languages and i put it on a different language, then i got distracted and my iphone went on autolock and now it wont unlock. What do i do? And if i restore it will it unlock my iphone?

I was messing with my keyboard languages and i put it on a different language then i got distracted then my iphones autolock locked my phone and now when i try to unlock my phone it doesnt have the correct letters that i have in my password so now it wont unlock. If i restore it will unlock or will i just be screwed??
HELP ASAP!

Yo can't. apps are locked to the account thatpurchased them and in-app purchases can only be mad with the account that originally purchased the app.
You will have to recover use of the first account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
If you have not uses any of the $10 you redeemed to the new account, you can likely get that refunded by contacting iTunes
Contact iTunes

Can't open individual windows to go back and take information from one and put it on a different one :?

....so I'm on fema's website and I want to take an elevation from fema, and put it onto a different screen.
Your windows all get dumped into one location.
Can't go back and pull out the window I need....
Jim

Yo can't. apps are locked to the account thatpurchased them and in-app purchases can only be mad with the account that originally purchased the app.
You will have to recover use of the first account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
If you have not uses any of the $10 you redeemed to the new account, you can likely get that refunded by contacting iTunes
Contact iTunes

Dump while running in FG mode at different places

We are running a Z transaction which is related to some trading of shares.
It is handling huge data.
when run in fore ground, its throwing dump at different places each time, its run.
For ex: CL_OS_CA_COMMON->Method SM_UPDATE_SUBSCRIPTIONS
In a different run, it failed at class CA_COL_POSITION_TRQ -> Method MAP_LOAD_FROM_DATABASE_GUID.
But the reason it states in both the cases is Maximum permitted time is reached.
We tried to improve the performance of the program technically and still getting dump.
So we want to post a message to SAP. For this, I need to know the module am dealing with. How Do I find that exactly.
As I was extracting my main data from table FMFINCODE, I thought its FUND MANAGEMENT.
Please help me in both the cases.
I also want to know, if a class is released for customer re-use or not?
Thanks
Kiran

Hi Rob,
Do you mean to say, SAP doesnt support custom transactions?
I did try se30 but I tried to reduce to the extent I could.
Any thoughts on the last question? If a class is for Customer re-use.
Thanks
Kiran

Why when we burn a DVD from iMovie, does it pause in different places?

Why when we burn a DVD from iMovie, does it pause in different places?

Hi
does it pause in different places?
During Burn ?
During Playback of DVD ?
On Mac ?
On Stand alone DVD-Player ?
During Burn.
What brand of DVD ?
What type of DVD ? DVD-R or DVD+R or +/-RW - SL or DL
Did You set down burn speed in iDVD ?
Free space on Start-Up (Mac OS) hard disk. HOW MUCH ?
Video codec used (feed into) iDVD ?
Yours Bengt W

In iPhoto9, I used to be able to duplicate a photo and put it in two different events. Is there a way to do this in iPhoto11?

In iPhoto9, I used to be able to duplicate a photo and put it in two different events. Is there a way to do this in iPhoto11?

In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter

AP 1552E: Put their antennas in different places

Similar Messages

Maybe you are looking for