AP 3500

Heelo Folks
does the cisco new wireless AP 3500 stops the Interference,,we have unified wireless network
2)is it applicable is that user run over channel 1 while 2nd user run over channel 6 and user 3 run on channel 11 on the same access Point?

Interference is everything that avoid the communication so, for example, any other device working on the same frequency at the same time will be noise to each other, for example cordless phones that works at 2.4ghz bluetooth devices and many other things.... so you cannot stop interference at all.
2) Yes, however that is why it is recommended to use non-overlapping channels.. 1, 6, 11 for America
So if you want to avoid interference between APs, use those, use this graphic as example:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob41dg/ch3_WLAN.html#wp1000270

Similar Messages

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Portege 3500 - 512MB memory modules lead to error

Hallo,
I tried to upgrade the memory in my P3500.
currently there is 1 256MB module installed in the slot beneath the keyboard.
I purchased 2x 512MB SO-DIMM PC133 ram modules, but both lead to errors / BIOS-beeps. I tried different combinations:
keyboard-slot: 512
bottom-slot: empty
--> long short
keyboard-slot: empty
bottom-slot: 512
--> long short short
keyboard-slot: 512
bottom-slot: 256
--> long short
keyboard-slot: 256
bottom-slot: 512
--> long short short
keyboard-slot: 512
bottom-slot: 512
--> long short (pause) long short short
This sounds as if the bios refuses the 512mb modules
I guess the beeps mean:
long short - keyboard-slot ram refusal
long short short - bottom-slot ram refusal
but according to the manual it should be possible to install 1 or 2 512mb modules. What am I doing wrong?
Do I need a BIOS update? (currently installed: "ACPI BIOS 1.20")
If only a new BIOS supports 512mb modules - is there a possbility to upgrade the bios from unix?
(the only BIOS download I found on the Toshiba support pages unfortunately just works for windows)
Help would be much appreciated...

Yes, you can upgrade your 3500 up to 1024 mb memory ( 2 x 512 mb ) but only with the right modules
You need *16 x 32 ( 16 chip architecture )* PC133 , 3,3v sdram modules ( 144 pins so-dimm )
I fear that your 512 mb modules are not compatible :-( you can count the chips on the module, there should be 8 chips on both sides of the module

Problem Create ANE,ArgumentError: Error #3500: The extension context does not have a method with the name

I little confuse about build ANE, I already follow all the direction, but the error always #3500 when I try to call the ANE.
I create ANE using java android.
The tools I use : Flash Builder running on Win-64 win.7. I think I must straight to the point, here what i made it first step by step;
1. I create the JAVA application first, with package senigo.extension.android then I create 3 file, Sample.java, SampleContext.java, PassTextFunction.java
Sample.Java Source Code
package senigo.extension.android;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
public class Sample implements FREExtension {
@Override
public FREContext createContext(String arg0) {
// TODO Auto-generated method stub
Log.i("Sample", "createContext");
return new SampleContext();
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("Sample", "Dispose");
@Override
public void initialize() {
// TODO Auto-generated method stub
Log.i("Sample", "Initialize");
SampleContext.Java Source Code
package senigo.extension.android;
import java.util.HashMap;
import java.util.Map;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREFunction;
public class SampleContext extends FREContext {
public SampleContext()
Log.i("SampleContext", "constructor");
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("SampleContext", "dispose");
@Override
public Map<String, FREFunction> getFunctions() {
// TODO Auto-generated method stub
Log.i("SampleContext", "getFunctions");
Map<String, FREFunction> functionMap = new HashMap<String, FREFunction>();
functionMap.put("passText", new PassTextFunction());
return functionMap;
PassTextFunction.Java Source Code
package senigo.extension.android;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
import com.adobe.fre.FREFunction;
import com.adobe.fre.FREObject;
public class PassTextFunction implements FREFunction {
@Override
public FREObject call(FREContext arg0, FREObject[] arg1) {
// TODO Auto-generated method stub
FREObject result = null;
try{
result = FREObject.newObject("Hello World");
}catch(Exception e)
return result;
after all the file I create the jar file using click right on the tree view >> Export >> Jar File >> Sample.Jar (i already create jar file that just contain the src folder and after i frustrated, i create .jar file contain all the whole project folder but still didn't work out).
Ok, After that I create project Flex Library Project, That's contain the actionscript to call the native and the extension.xml, here the code.
Test.as Source Code, FYI : i already create public function and the static function the error still same #3500.
package senigo.extension.android
import flash.external.ExtensionContext;
public class test
private static var extContext:ExtensionContext = null;
public function test()
trace ("Test Constructor");
if (!extContext)
initExtension();
public static function get passText():String
trace ("Test Pass Text");
if (!extContext)
initExtension();
return extContext.call("passText") as String;
private static function initExtension():void
trace ("Vibration Constructor: Create an extension context");
extContext = ExtensionContext.createExtensionContext("senigo.extension.android", null);
extension.xml source code
FYI: in Flex when i put the Native Extension, they said must have Windows-x86 so I already create 3 ANE, that just contain Android-ARM , Contain Android-ARM and Default, Contain Android-ARM,Default and Windows-x86 but the error still same. I didn't got it where is the error.
<extension xmlns="http://ns.adobe.com/air/extension/3.1">
<id>senigo.extension.android</id>
<versionNumber>1.0.0</versionNumber>
<platforms>
<platform name="Android-ARM">
<applicationDeployment>
<nativeLibrary>Sample.jar</nativeLibrary>
<initializer>senigo.extension.android.Sample</initializer>
<finalizer>senigo.extension.android.Sample</finalizer>
</applicationDeployment>
</platform>

<platform name="default">
<applicationDeployment/>
</platform>
</platforms>
</extension>
After I create it, I copy the .swc file and extension file sample with the Sample.jar file.
I extract the .swc file, copy the library.swf to folder Android-ARM,Default,Windows-86 and I create build.bat that contain the command like this
adt -package -storetype PKCS12 -keystore senigo.p12 -storepass l10nk1ng -target ane senigo.extension.android.ane extension.xml -swc AndroidLib.swc -platform Android-ARM -C ./Android-ARM/ . -platform default -C ./default/ .
the I put the ane to Flex mobile project that I created:
I run it but got error #3500, I really confuse?? what's wrong with my code? is there something I wrong or I Miss it?
Please any one help me.. and when is already ane file can I debug it in Flex Mobile Project? I wanna looks the log.i code that i wrote but i confuse how to looking up in flash builder.
at the end, I wanna said Sorry if my english not very goods, and thanks, because wanna see my problem and thank you very much if You can gave me a solution's

Alex Rekish wrote:
Why you comment Windows-x86 in your extension.xml ?
I think that is a problem. You launch your application on Windows but ANE haven't got Windows-x86 implementation (also you don't include it while packaging). So your application use default implementation. But default implementation don't use any native code and cannot use ExtensionContext. And you got error.
If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation.
Thanks for you answer Alex Rekish, Sorry I didn't screen shoot all about the extension.xml. I comment it because the latest ANE that I build is contain Android-ARM and default. so I commented. but I already try it using just ANE that's just contain Android-ARM, with Android-ARM and windows-x86,and Android-ARM, and default, and Android-ARM,default,Windows-x86 the error still the same.
here the screen shoot, I embeded the ane that's i contain Windows-x86
in action script test.as I didn't change it anythings, I just play it on extension.xml to build the ane. is there any mistake over there? I interact with your answer that "If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation." I didn't need to user ExtensionContext? is means? in the actionscript? or in extension.xml? can you explained

HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button?

after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button? thanks.

thanks for the reply. guess i'll have to do that. apple, not really happy with what you've done with this latest update. have not been able to enjoy my music in my car since the update. most of us dont mind changes that progress timely, but this was much more than just a progression. this was a complete change. and not a good one, at all. thanks to the two people that replied. appreciate it.

Will HP ever be issuing a Windows 7 Driver for Color Laserjet 3500

When I did installs of Win 7 several months ago, my 3500 worked and could be shared. When I had to do a Win 7 install a few days ago, I lost support for this printer. All installs were "upgrades" to XP. It worked for months.
I have to be printing color later this week. My HP laserjet 5000 has been supported for 15 years. The 3500, 6 years then nothing. Can anybody at HP give me a good reason to buy their printers ever again?
PS, none of the workarounds posted here work for the 3500. Note that none of the 3500 inquueries are "solved".
So, any reason not to drop this 3500 in a garbage can and go Ricoh forever HP?
This question was solved.
View Solution.

I would certainly try that.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 7 driver for 3500 color printer

I need a windows 7 driver for my 3500 color laserjet printer. Windows XP is the latest driver listed on the website.

The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot.
Message Edited by DexterM on 07/10/2009 10:57 AM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
Capture.JPG ‏57 KB

Need Windows 7 driver for HP color laserjet 3500

Urgently need a driver for my HP color laserjet 3500 to install on new laptop with Windows 7! HP and Windows sites say there is no driver for Windows 7. I really love my printer but need the driver. What can I do?

According to this HP website, Vista driver only works for 64 bits win7

HP Pro 3500 Microtower PC drivers for Windows XP 32bit

Hello,
May I kindly ask if it would be possible to assist me in terms of locating Windows XP Home Edition (32 bit) drivers for the HP Pro 3500 Microtower PC (product number F4Q49ES )?
<script type="text/javascript" language="JavaScript">// var theme = '#EB5F01'; // </script> <script src="https://secure.hp-ww.com/country/us/en/js/hpweb_utilities.js" type="text/javascript" language="JavaScript"></script> <script src="https://ssl.www8.hp.com/uk/en/system/include/privacy_cookie.JS" type="text/javascript"></script> <script src="/t5/forums/postpage/board-id/util/browser.js" language="javascript"></script> <script src="/t5/forums/postpage/board-id/util/webclient.js" language="javascript"></script> <script src="/t5/forums/postpage/board-id/util/ScriptLib.js" language="javascript"></script> <script type="text/javascript" language="JavaScript">// var theme='#EB5F01'; // </script> <script src="https://secure.hp-ww.com/country/us/en/js/hpweb_utilities.js" type="text/javascript" language="JavaScript"></script> <script src="https://www.hp.com/cma/ng/lib/bluekai/hpbluekai.js" async="true" type="text/javascript"></script>
In HP's Support Center portal I only see drivers for Windows 7 and above.
Many thanks.
Best regards,
Ryan

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Hp Color laserjet 3500 not work - help wated

My printer laserjet 3500 has been out of work for a week.
It tell these;
1. Open lower rear door. Fuser is Hot. Press both sides of fuser to ensure it is fully seated.
2. Close the door. Turn off printer then turn on. If errors reappears, record message and cotact suppor.
I keep doing per suggestion, but out come still the same. I rang Hp service support, the guy asked me to send e-mail. I could not find support e-mail address but reach this board. Can any Hp-technician support help me out? Please.
Question:
a) Does the printer need repair?
b) Estimated cost.
Thanks
Mama

@dwropp
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Hp laserjet 3500 printing only one page

My HP Color Laserjet 3500 is printing but it only prints multiple pages of the first page of my document jobs. It doesn't matter how many pages in the print job, it only prints multiple copies of just the first page of the job. Even if it's just one page of a document, it still prints multiple pages of that document even when it set at 1 of 1 on the settings page. Any suggestions???

Try a reset of the printing system. This will remove the printer from Print & Scan but not the supporting driver, so you will just to have to add the printer again.

HP color laserjet 3500 print blue arrows on right margin

HP color laserjet 3500 print blue arrows on right margin abouti 3 in apart and middle of the page yellow blotches
tried to clean and calibrate nothing changed. dont see any extra blue or yellow toner powerder anywhere.
please help.
does this on test pages and anything eles printed

@dwropp
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

3500 songs in iTunes with exlamation points - iTunes can't locate files but they are there!

Hi,
Since a few weeks, 3500 of my 10000 iTunes songs have exclamation points. When I try to play a song, I get an error message stating that iTunes can't find the song. If I search for it, it's on my Mac. So the files are on my hard drive, except that iTunes can't find them.
As it's weeks of work to manually relink the songs to their location on my hard disk, is there anybody who could help me with this?
Many thanks in advance!

Hi Esteban
As you see the exclamation mark represents a missing link to the file and the subsequent unable to play the track.
If you select one of those files and look at the info(CMD I or Get Info) and go to the Summary tab that identifies where iTunes thinks it was stored. From here you can navigate in finder to that location or do a search for what iTunes states the filename is e.g. (01 Track 01.mp3).
So either the file is deleted, renamed or moved.
Regards
Mark

HT1420 After updating to 11 for itunes and ios 7 for phone - I lost over 3500 songs from my itunes. My ipod still has 4100 songs on it less the most recent ones I have purchased. Can't my ipod be used to recreate the library in itunes?

After updating itunes to 11.1 and phone to ios7, I lost more than 3500 songs from my library. My ipod has 4185 songs less the most recent I purchased.
Is there no way an ipod can be used to restore the lost music? Yes, some of it was from cds but were done a long time ago. Obviously it was acceptable for me to compile this music then, now they want to say since it all wasn't purchased, I can't have what was already mine? Plus I do not use nor want to use the cloud, but it keeps creeping up even though I don't want or use it. HELP!

See Recover your iTunes library from your iPod or iOS device.
tt2

Portege 3500 loads start up files but will not setup XP

When I purchased this 3500 it did not have an OS.
I managed to find a PCMCIA CD-Rom (thanks to this forum) which it will recognize the Windows XP CD.
This loads the Startup files but when we get to the Windows setup it closes the computer down requesting I look for virus and do a ch disk on the HDD.
I put the HDD in my other laptop and Windows seems to go into setup with no problems.
The HDD seems to have no problems.
This has bugged me for a couple of months now so any advice from anybody will be gratefully received.
Many thanks,
Martin

Hi again.
I've found something that might help you. It's not very easy but is should not prove too much of a problem either.
First go to this website : http://www.ultimatebootcd.com/ and download the latest build of the boot CD (which seems to be a very nice general tool by the way!).
Once downloaded, unpack it and burn the ISO-file to a blank CD Rom. You'll need a ISO-capable burning software to manage this (like Nero or other similar software).
Ok, so now you have the Ultimate Boot CD in your hand (hopefully).
Attach the external CD Rom to you P3500 and turn the P3500 on.
During the Toshiba-logo press ESC several times. You should get a message saying "Check system. Then press [F1] key."
If not - if the PC starts booting or display a boot failure message - just restart the machine and try again.
Now press the F1 key to enter the BIOS setup.
In the BIOS Setup, press HOME to set default settings, then press END to exit and confirm by pressing Y.
The machine will reboot.
When the TOSHIBA-logo is shown press F12-key a few times.
It should now stop with the boot device selection menue in the bottom.
If not - if the PC starts booting or display a boot failure message - just restart the machine and try again.
Make sure that the Boot CD is in the CD Rom and that the CD Rom is attached to your machine.
In the Boot device selection menue choose the icon that looks like a single disc (CD ROM). Get there by pressing the right or left arrows.
Mark your choice by pressing ENTER.
The machine should now boot from the boot CD Rom.
Once booted choose F6 - DOS/Linux boot disks
From the next menue choose F1 - FreeDOS boot disk
Next steps are a bit tricky because many choices you are provided are time-limited so you need to be quick - or like me, slow and have to do the same procedure over and over again to get it right.
Or! You can use the arrowkeys to abort the timer in the coloured menues! Nice to know when the limits are set really tight.
Choose no 1 from the menu which is default so if you don't choose here - it will be chosen for you.
Next you will be prompted with a kind of 'error' message that the software does not recognise the hardware (chipset). Just press ENTER.
Now the first coloured quiestion will pop up - do like described above if you need more time to think (like me) press the arrow-keys.
You can press Abort on the first one asking about ASPIUSB
Next one is important - CD-ROM.
Press Config.
In the menue that appears, choose Auto, try to detect all. Move around by using the TAB or arrow key and choose the item with SPACE.
The press Save - but you will get an error message since it is not possible to save this setting to the CD Rom. Don't worry, press OK.
Now press OK to run the CD Rom driver.
Next menue "ASPI"- press OK
Next menue "Keyboard" - press OK or press Config to pick another layout.
Next menue "DOSLFN" - Press OK
Next menue "NTFS Support" - Press OK
Last menue - Press OK
Now, finally! You have acess to both CD and HDD. The driveletters are shown at the bottom of the screen.
Next step is to insert the XP disc, copy the contents from the \i386 folder to a temp directory of the HDD and start the installation from that place.
Phew!
Good luck
Tom

AP 3500

Similar Messages

Maybe you are looking for