Ap 3700 PoE with PSE that does not support CDP/LLDP power Negotiation

We run into a problem when AP 3700 is connected to an 802.3at PSE
that only supports physical event classification as compliant to 802.3at standard for PSE,
but does not support CDP/LLDP power negotiation.
AP 3700 (I believe the firmware version does not matter much) cannot get enough power after not receiving any CDP/LLDP power negotiation packet. (get no more than 15W power although PSE supports 30W.)

Hi Leo,
Thanks for the information, and do you know if Phihong power injector supports 802.3at LLDP power negotiation or not?
And is there any special configuration on AP3700 side like disabling CDP/LLDP power negotiation to make it to work with such power injector,  and what is the command if there is any?
Thanks again, Leo.

Similar Messages

  • The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

    I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD.  I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it?  Thank you

    Hello,
    This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
    Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
    Hope this helps:

  • The document is on a volume that does not support permanent version storage

    Hi All
    I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
    I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed  ?
    Thanks in adavance.

    Mate
    That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
    This does seem to be Apple problem if you read this article
    http://support.apple.com/kb/TS4218
    the issue i am having is this .
    if i create a text file in windows with notepad and save it on a nas drive.
    inside a text file i will have
    this is a test
    i go to my mac open the text file with textedit and add following text in new line
    this is test 2
    now i go back to windows box open same text file you will see that following
    this is a testthis is test 2
    basicly what it does it puts it on same line as the first line.
    and this all use to be fine before 10.8.2
    I am sorry if i came across rude i just need some help.

  • Xcode: volume that does not support ownership

    I just tried to install the latest Xcode which, after installing its components, flashed this warning:
    "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
    Any clue what's up with that and how to fix it? If this is a permissions issue, I haven't had any difficulties related to permissions for quite awhile.
    Thank you!
    ray

    Run Disk Utility
    Select the boot disk (usually called Macintosh HD)
    In the File Menu select 'Get Info'
    Scroll down the list and look for 'Owners Enabled', this should say yes but if it says no might explain your problem
    If you are running Xcode from a volume other than your boot disk repeat the above for the appropriate volume to find the same answer
    Now assuming the answer is that the respective volume has 'Owners Enabled' set to no i.e. off, then this needs fixing, for a volume other than your boot drive this is fairly easy
    Go to the Finder
    Select the volume - not a file or a folder
    Go the File Menu and select Get Info
    Look at the bottom of the Get Info window for the option 'Ignore ownership on this volume'
    You need to first 'unlock' the Get Info window by clicking on the padlock symbol and entering an admin password
    Then make sure the 'Ignore ownership on this volume' option is not ticked
    If it is your boot volume then the process is different. You are probably going to either need to boot from a different volume to do it, or you are going to have to do it via Terminal.app. If your doing it via Terminal you first need to find out the device name for the volume. You would do this by typing
    diskutil list
    Typically your boot disk is going to be something like /dev/disk0s2 once you have found the right one then the next command would be
    sudo diskutil enableOwnership /dev/disk0s2
    assuming that /dev/disk0s2 is the right choice.

  • Ate a website that does not support Safari. What are my optional browsers?

    I need to navigate a website that does not support Safari. What other browser are available to me if I am running OS X.4?

    You may not need another browser. In Safari Preferences > Advanced, click the box "Show Develop menu in menu bar".
    A new menu with that name will now be available. Choose the "user agent" that placates the website. That will at least load the page, but if you find it doesn't render properly you can always use Firefox.

  • How to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

    Does somebody know how to syncronize an iphone5S within a Macbook 10.5.8 that does not support the lattest version of ITunes?

    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    You need to upgrade your OS X before installing the latest version of iTunes.  Then you will be able to sync your 5S.

  • Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

    Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

    No.

  • The document "PP_CS_Higher Education_USA_V1" is on a volume that does not support permanent version storage.

    The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
    Any thoughts out there?

    This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
    Move the file to the desktop before you open it.
    Where is this file stored, a CD or DVD, external  hard drive, USB memory ?

  • "The files are on a volume that does not support Trash. Would you like to permanently delete the item?"

    Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
    iMAC OSX 10.9.4.
    LR 5.6,
    Camara Raw 8.6
    Any idea?
    Please Help Me...
    Thanks in advance
    Jose

    This is how I solved it, thanks to combined information posted on forums:
    1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
    2. Created a folder in new external drive >imported to LR->send to trash- empty trash
    3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
    4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
    5. Selected the pics -photo>remove> delete from disk
    Done!!!
    Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration .

  • Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.

    I have Problem,  I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
    I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
    Here's my HD Info.
    Mac HD : Yosemite
    Machintosh HD: Lion
    I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
    Thank you. Sorry bad english.

    Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
    Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
    post back if that does not resolve the issue.
    regards

  • I download the recent ios for iphone 4 and connected to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support ios 7?

    i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?

    Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.

  • I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

    I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

    Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app.  When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund.  I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

  • Tuxera Version That Comes with HDTC705XK3​A1 Does Not Support on Install on MAC OSX 10.9.2

    The Tuxera version pre-installed (2012.3.6) on my hard drive does not support Mac OS X 10.9.2
    I first looked at the support site and it says there isn't any updates for drivers & software for the Toshiba 500GB Canvio Connect Portable Hard Drive (HDTC705XK3A).
    I am on OSX 10.9.2 and would like a working copy of Tuxera to use with my new Toshiba drive.  Please advise where I get the updated version.  Going to Tuxera requires buying a copy of the software.
    Thanks,
    Doug

    I have the same problem after an upgrade to my iMac.  Fortunitely, a wWindows machine will read your drive.  I also have a new Macbook Pro with 10.9.3 on it and it loaded Tuxera correctly. Not sure why it works on one not the other.  I wnet through the following steps:
    After I upgraded my iMAC to Maverics, I could not see my NTFS drives in finder or on the desktop. I could see my NTFS drives in Disk Utility but they were grayed out and are not accessible. I could boot the iMac in Windows and have access to all of my NTFS drives.
    I tried reinstalling the latest version, 2013.2, downloaded from your web page. I can see my NTFS drives but could not write to them. I then got the following message when the system started up, "invalid product key". When I opened Tuxera from the system preferences page I get the following message on the Activation page, "Current status: Invalid product key. Limited performance mode." I have tried reloading Texura from the Toshiba drive, but the process doesn't complete the last step.
    As a last step, I uninstalled Tuxera and can not reinstall it. I get the message "The Tuxera NTFS for Mac installer could not detect your Toshiba External HDD. Please attach it to your Mac and run the installer again. I'm running the installer from the Toshiba drive so the installer should detect it.
    Please note, I have a new Macbook Pro that came with Mavericks and I loaded Tuxera from the same Toshiba drive. It has no problems writing to it. The upgrade to Mavericks caused the problem.

  • I need firefox 2 temporarily to use with a program that does not support version above 2.0 what do i do

    I am trying to access information from a teaching site for securities exam and it will not let me access the programs because it does not support version above 2.0 and i have 3.0 or 3.5 please advise.

    The page title is "Minimum System Requirements for FINRA E-Learning Courses", so I would assume that the page works with newer Firefox versions. All other requirements on that page looks pretty outdated with Flash 8 as minimum.
    * http://www.finra.org/Industry/Education/OnlineLearning/E-learningCourses/P119435
    On which page do you get that error?<br />
    The login page in your More system details list doesn't give an error for me.
    If you really need such an old version the use the portable version of Firefox 2.0.0.20.<br />
    You can find the portable Firefox 2.0.0.20 version under "Mozilla Firefox, P.E. Legacy > Mozilla Firefox":
    Win: http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20P.E.%20Legacy/
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r32
    # Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • HT201272 I seem to have a version of overdrive media console that does not support wma audiobooks files. Is there anyone with this problem with a solution.

    I recently installed the overdrive media console.  I was able to down e books and mp3 books but when I tried to down wma books. A message flashes out that the omc that I installed from the apps store is unsupported format.  The version of omc does not support wma audiobook titles.  Any suggestions.
    Daphne

    WMA stands for Windows Media Audio...it is a Microsoft audio format that is not supported on the Mac or iOS version of the apps.   If you want to use the WMA audiobooks, you will have to use the Windows desktop app.  You can use MP3 audiobooks on any version of the app.

Maybe you are looking for

  • External hard drives are now in my dock. How to remove forever?

    For some reason, my four external hard drives and internal hard drive are now appearing in my dock. They cannot be dragged out (smoke poof), I can QUIT them and they are removed from the dock and remain on the desktop where they ought to be. But when

  • Any way to Convert CHAR(8)  field to QUAN(8)?

    Any way to Convert CHAR(8)  field to QUAN(8)? Thank-You.

  • Errors when installing 7.2?

    Hi folks, Just been upgrading to 7.2 and kept getting the message that there had been errors and i had to try the install again, this happening right at the end of running the contents disc...after trying a couple of times I thought I would just chec

  • Help My ipod got wet and won't turn on

    Recently an accident happened where water was spilled onto my brand new ipod chromatic, I have no idea what to do and let it sit out to dry. Does anyone know if it wil work afterwards or something I can do to help/ fix it?

  • How can I use isight on MSN

    Can someone please tell me how I can see someone on MSN with my isight camera? All my grandchildren have pc's and I would like to see them. I don't want to change my Apple as I love it, but do want to be able to see and talk to them. Many thanks