AP Aging report - key date for user entry

Hi All,
We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
I know the key date for this report is created on net due date in SAP standard report.
In standard SAP report , key date is always a system date(SY-DATUM).
What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
Can  someone Pls tell me if aging buckets are calculated based on a user entry ?
Regards,
Kumar

Hi Voodi,
Aging in the standard report is being calculated like below...
1.For open items
Posting date<key date
Item status = O
2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
in this scenarion , key date is always system date ie today's date.
But user wants to get all the invoices based on his user entry...
is this possible with the same standard key date variable or do we need implement any other logic???
Regards,
Kumar

Similar Messages

  • Ageing Analysis - Key date

    Dear Experts,
    When I am Executing Ageing Analysis u2013 Customer outstanding report (On InfoCube 0FIAR_C03), If I give Key date 31.7.2009, it is showing correct result for grand total balances = Sum of the totals of balances of ( 0 days + 1-30days + 31-60 days etc).
    But when  I use the key date for the same query say 4.8.2009, the totals of balances & sum of the totals of balances of ( 0 days + 1-30days + 31-60 days etc) not matching.
    In the report for some documents no values are coming in the ageing part, even its balances are there in the balances.
    Could you please help?
    Thanks,
    Nav

    Hello,
    Key date is for time dependent master data values only.
    Do you have any time dependent master data in the queries??
    Also,it will show only those values which are valid on this date....that is the only those values of master data from the cube will be read which have validity period for this date.
    So its quite possible that many master data values have there validity period ending on 31st July and therefore there are new values for them and based on that its picking up different value from the cube
    so values at 4th August need not match with the key date value for 31st July.
    The good Idea could be to see the values of time dependent char which you are using in the query  and its values for both the key dates and then verify the difference.
    This could explain why the values are not read from cube even if they are there beecause the master data values in those records does not fall in the validity date which you have given.
    Regards
    Ajeet

  • Liabilities Ageing report not acknowledging old journal entries

    Hello,
    I have just upgraded a system from 2007A SP00 PL48 to 8.8 SP00 PL17.  When I ran the Vendor Liabilities report in 8.8 I noticed that one of the business partners has a journal entry and an open invoice.  The journal entry has no value when displayed in the report however when i open the journal up, it is showing a debit for the exact same amount as the invoice, but was created as a result of a foreign exchange gain and has not been reconciled against the invoice.  The ageing report is showing that the invoice is still outstanding and needs to be paid.  However when I run exactly the same report in version 2007, the two amounts are seen to conteract each other and therefore no oustanding amount is shown in the ageing report for this customer.  When I reproduce the scenario in 8.8 with a new invoice and new journal entry, the two transactions are shown to counteract and no outstanding balance is displayed.
    Does anyone know if there is a problem with old journal entries being recognised in the ageing report in version 8.8 or specifically journals created as a result of foreign exchange rate losses/gains?
    Many thanks,
    Kate

    Hi Kate,
    We recently upgraded to 8.8 and in reviewing the aging reports realized some manually reconciled entries had to be redone.
    In particular, it seemed to be for entries where foreign currencies were involved. There is a new field in the Internal Rec window in the top left corner - select it and the entries with only SC value will then appear (i.e. you will see all unreconciled entries) along with other entries.
    HTH,
    Heather

  • Expire date for user in the system

    HI ,
    There is a place when we can defined expire date for user in the system ,
    something that similar to role that provided to user from 24/02/2010 - 25/02/2010 .
    i search in su01 and not found anything .
    any idea?
    Regards
    James

    hi james,
    i thin k you can do it in su01 logon data tab--->valid through (in validity period).
    Hope this will help you.
    Thanks,
    Tanmaya

  • Currency Translation on Key Date for AR Aging

    Need your valuable advice!
    I have created an AR Aging query including both Open and Cleared Items based on 0FIAR_C03_Q0005 standard query. However the requirement is to do currency translation to Group Currency (USD) on Key Date. This Key date is defaulted to today but the user can change this to go back in time and pull all the ARs as of that back dated key date.
    I was planning to create a currency translation type on M rate based on the Key Date Variable in RSCUR. However I am confused on which variable to base this currency translation. I have several key date variables in my query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date).
    Which Key Date Variable should I use in 'Time Reference from Variable' field in RSCUR? Would it be one of the 3 mentioned above or something else and why?
    Appreciate your valuable advice.
    Thanks,
    Al

    Hi,
    Yes I do want to use the Key date from the variable screen and I am using the standard 0FIAR_C03_Q005 with slight modification including currency translation.
    As I mentioned in my original post I have several key date variables in this query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date). My question is which one should I use if I want to base it on the specific key date variable from the variable screen? I need the specific Key Date variable technical name.
    Thanks,
    Al

  • Capturing key data for tracking/compliance

    We have two separate user groups, both of whom can access eLearning portal. One group (permanent staff) does have LMS logins but a bigger (volunteer) group have no login IDs (in a year or so, this may change)
    However, i'd appreciate advice on how to capture basic data (Pass/score and Name, - plus users Location/Role/Manager, not currently captured in our LMS)
    Using CP4, I have set up a Random Q pool and then a slide with free Text Entry Boxes, to input key data.
    There are potentially too many people to manage creating an email to send data.
    How do I collect/export the data into, say, a spreadsheet (as an interim solution to capture data to report for compiance training ) .
    If this is possibile, Step-by-step help would be appreciated. (not a techy and never used anything like java scripting)
    Much thanks in advance

    That seems remarkably complicated - surely there must be an easy way to say That is precisely the way all Actions are handle by Swing components. It is extremely easy if you take a few minutes to understand how it works.
    Using a KeyListener is the wrong approach.

  • Key date for a query

    Dear All,
    I have created a customer exit variable on key date of a query.
    With this input variable i am first asking user to input one particular date say he enters 31.12.2010 then i am trying to add 1 more day to it and making it 01.01.2011.
    I have put a break point in the code but it does not stop the processing there.. report executes directly taking the first user input.
    I want to add 1 more day to the user entered date and this modifiied date should be the input date for key date field.
    Below is my code.
      WHEN 'ZCAL_DAY_EXT'.
        IF I_STEP = 2. "after the popup
          LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
          WHERE VNAM = 'ZCAL_DAY_EXT'.
            CLEAR L_S_RANGE.
          ENDLOOP.
          DATA: v_temp like sy-datum.
          v_temp = loc_var_range-low.
          v_temp = v_temp + 1.
          L_S_RANGE-LOW = v_temp.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'EQ'.
          APPEND L_S_RANGE TO E_T_RANGE.
        ENDIF.
    Do let me know where am i going wrong? Or is it we cannot use customer exit with Key date.
    Thanks & Regards,
    Anup
    Edited by: Anup Chaudhari on Aug 2, 2011 7:16 AM

    Hi Anup,
    Basically I_STEP = 1 is used for populating the default value which will be shown on selection screen and I_STEP = 2 is the step in which you does the processing on variable values which are entered on selection screen.
    I am surprised that your internal table is empty, actually it is supposed to contain all the variable values which are entered in I_STEP = 1.
    Can you try to add some more variables along with the current variable and check whether their value is coming in the internal table or not?
    Finally what you can try is get the user input date in one variable and then create another customer exit variable in which you will calculate the new value and use this variable in Key date, the problem might be that we are trying to modify the same variable, actually it should not be the problem but I have no clue what is happening and you can just try this alternative.
    Regards,
    Durgesh.

  • Unable to open a report and asking for user credentials

    Hi,
    when i am trying to open a crystal report, i am asking for user credentials and my URL is directed to the below URL
    http://hostname/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FSERVICE%3D%252FOpenDocument%252FappService.do%26OBJIDS%3D20016421%26backUrl%3D%252Fcontent%252Fview.do%26PREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26CONTAINERID%3D6424083%26backContext%3D%252FPlatformServices%26LOC%3Den%26APPKIND%3DInfoView%26PVL%3Den%26ACTID%3D280%26service%3Dtimeout&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=servername%3A6600&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
    Please help me on this

    Hi,
            This is happening to all of the users. And this kind of behaviour is happening frequently to most of the users but as for me and some of us this is not happening frequently.
    And we are using Crystal Reports 2008 ie. CR12.
    -VinodC

  • How to show specific data for user on redirected page once they logged in

    I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
    I am not very good with the coding part so if it requires it any help with that would also be helpful.
    thank all.

    I should be able to get the understanding if explained.
    As for scripting i believe its PHP. at lease thats the page i created the login page with.
    As for user-specific information: basiclly there account information.
    As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
    1st table has the following: ID - User Names - Password  - account number
    2nd table has the following: ID - account number - names - address - ect
    So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
    Thank you Murry

  • PDF's I'm creating with Group 4 data report Insufficient Data for Image

    I am maintaining a software application, which creates PDF files from JPEG and TIFF (with Group 4 compression) image files, which typically come from scanners.  It has performed well for many years, but as of the release of Adobe Reader X, we are seeing "Insufficient Data for Image" on some images.
    I've read reports of this message on these forums, and I've tried shrinking the image, adjusting zoom, and upgrading to Adobe Reader XI -- none of these have worked.
    Our software creates these PDF files by wrapping the raw image data in an XObject, which looks like this:
    24 0 obj
    << /Type /XObject
    /Subtype /Image
    /Name /Im1
    /Filter /CCITTFaxDecode
    /Width 1704
    /Height 2200
    /BitsPerComponent 1
    /ColorSpace /DeviceGray
    /DecodeParms <</K -1 /Columns 1704 /Rows 2200 >>
    /Length 25 0 R >>
    stream
    <<BINARY DATA>>
    endstream
    endobj
    25 0 obj
    31512
    endobj
    Wherein, the <<BINARY DATA>> are 31,512 bytes of raw image data -- the same data which would appear in a Group 4 compressed TIFF file. 
    Indeed, when we do create a Group 4 TIFF file with the same binary data, it opens successfully in all common viewers.
    Any assistance, such as the precise meaning of this error message, could be helpful.

    Just a note that the bug appears to relate to JPXDecode, so far as all previous reports seem to suggest (no inside information). JPXDecode supports multiple image resolutions in the same image, so messing with zoom sometimes helps. If you can post a complete file somewhere it might interest someone who could analyse it.
    The message simply means that decompressing the filters does not yield enough bytes. This may either reflect that there really isn't enough data, or it could indicate any kind of data error (which causes the filter to silently return EOF).

  • Extract Cube data for all entries of an internal table

    Hi
    I want to fetch the data from the cube for all entries of another internal table.
    Scenario : Fetching the COMPANY_CODE and DATE into an internal table and for those company codes and Dates, I have to fetch the records of the Cube.,
    I am using the Function Module : RSDRI_INFOPROV_READ
    But not sure how to accommodate the multiple selections condition for this.
    Selection Required:
                                    *For all entries of it_cc
                                      where comp_code = it_cc-comp_code and
                                                  date = it_cc-date.*
    Please help me how to such multiple conditions and "for all entries" functionality for fetching the data from the cube.
    Thanks.
    Veera Karthik G

    HI
    You can try like this
    LOOP AT lt_donotcall_old .
    <ls_donotcall>-examination_date = sy-date.
    <ls_donotcall>-examination_time = sy-time.
    ENDLOOP.
    append it_donotcall_old.
    Reward all helpfull answers
    Regards
    Pavan

  • Suppliers Aging Report layouts - Date in US format

    Hi all
    I am running the above layout.  The Date field for the document date is a system variable but it displays as US format.  How do I get it to display UK? 
    Thanks!
    Lorna

    Hi Lorna,
    You may check this: Re: Debtors Report PLD Date.
    Even though the problem seems different, it sounds like some other settings may cause system variable behaved differently.
    Thanks,
    Gordon

  • Reports not visible for users

    HI,
    I had designed few reports in SD and MM. how do i link those reports for users. and generally what is the path for the users to see the reports in BEX.
    Thanks in advance
    Ravi

    Hi Ravi,
    Create a role (PFCG) for your users and provide them access to view and run the reports and then you save the reports to that role. Then the users will be able to view and run the reports.
    If you save the reports to favourite, only you will bve abel to see them as it is specific to you.
    Hope this helps,
    ***Assign points if helpful***
    Regards,
    Kalyan

  • Read data : for all entries

    wht happens if v read data using FOR ALL ENTRIES in select statement

    Hi Ankur,
    You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
    SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result set. If the internal table itab does not contain any entries, the system treats the statement as though there were no WHERE cond condition, and selects all records (in the current client).
    For Example:
    SELECT *
      FROM SCARR
      INTO TABLE t_scarr.
    LOOP AT t_SCARR INTO wa_scarr.
      SELECT SINGLE *
        FROM sflight
        INTO wa_sflight
       WHERE carrid EQ wa_scarr-carrid.
      APPEND wa_sflight TO t_sflight.
    ENDLOOP.
    Instead of the Above use below code:
    SELECT *
      FROM SCARR
      INTO TABLE t_scarr.
    SELECT *
      FROM SFLIGHT
      INTO TABLE t_sflight
       FOR ALL ENTRIES IN scARR
    WHERE carrid EQ t_scarr.
    this condition, return all entries of the sflight
    Refer the Below Links for more Info:
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3a1f358411d1829f0000e829fbfe/content.htm
    Regards,
    Sunil

  • Start and End dates for users in Enterprise portal

    Hi Expert,
    I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

    Hello
    Please check below URL for User Import Format:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
    Regards,
    Tapan Goyal

Maybe you are looking for